Kübra Meriç Uğurlutepe
Kübra Meriç Uğurlutepe has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Hüseyin Sauk
Department of Agricultural Machinery and Technologies Engineering, Faculty of Agriculture, Ondokuz Mayıs University, 55100 Samsun, Türkiye
4 shared publications - Mehmet Arif Beyhan
Department of Agricultural Machinery and Technologies Engineering, Faculty of Agriculture, Ondokuz Mayıs University, 55100 Samsun, Türkiye
1 shared publication
Latest Publications
- 16 March 2026
- Published by Tekirdag Ziraat Fakultesi Dergisi in Tekirdağ Ziraat Fakültesi Dergisi
- Vol. 23 (2) , 601-609
Ergonomic Analysis of TomatoHarvesting in Greenhouse Agriculture
This study was conducted to determine the strain, stress, and resulting ergonomic risks experienced by workers during the manual harvest of cluster tomatoes grown in greenhouses. Türkiye ranks among the top three tomato producers, with tomato production varying from year to year, at approximately 13 million tons. Of this total, approximately 4.1 million tons are grown in greenhouses. Tomato cultivation contributes significantly to the national economy in both domestic and international markets. The harvesting accounts for the largest share of labor and time in the cultivation of agricultural products. In Türkiye, greenhouse farming is predominantly carried out manually due to inadequate physical conditions, lack of mechanization, and other factors. While harvesting varies depending on the task, workers often work in unusual and awkward postures. Furthermore, ripening times for tomatoes can vary depending on the variety, preventing the harvest from being completed in a single harvest. Consequently, the work performed and postures adopted during harvest are constantly repeated. Although the fruits are hand-picked during tomato harvest, this is undesirable because it damages the flesh and reduces the fruit's value. For this reason, pruning shears are widely used during harvesting. The primary manual tasks in tomato harvesting include cutting the fruit from the bunches, placing them in crates, and transporting the crates to the storage area. During this process, workers maintain five different workstations while cutting the tomato bunches: kneeling, bending forward, squatting, standing, and reaching upward. Workers' working postures were recorded during harvesting, and the AWBA scoring scale, developed for agricultural use, was used. Accordingly, of the five workstations, reaching upward picking was found to be the highest, while other postures were found to have a high risk score. The high ergonomic risk, the repetitive movements, and the greenhouse climate during harvesting were found to be sufficient to cause musculoskeletal disorders in workers. Some simple mechanization recommendations have been developed to reduce the ergonomic risk score. It is considered important and necessary to implement and test these recommendations.
- 16 March 2026
- Published by Tekirdag Ziraat Fakultesi Dergisi in Tekirdağ Ziraat Fakültesi Dergisi
- Vol. 23 (2) , 601-609
Ergonomic Analysis of TomatoHarvesting in Greenhouse Agriculture
This study was conducted to determine the strain, stress, and resulting ergonomic risks experienced by workers during the manual harvest of cluster tomatoes grown in greenhouses. Türkiye ranks among the top three tomato producers, with tomato production varying from year to year, at approximately 13 million tons. Of this total, approximately 4.1 million tons are grown in greenhouses. Tomato cultivation contributes significantly to the national economy in both domestic and international markets. The harvesting accounts for the largest share of labor and time in the cultivation of agricultural products. In Türkiye, greenhouse farming is predominantly carried out manually due to inadequate physical conditions, lack of mechanization, and other factors. While harvesting varies depending on the task, workers often work in unusual and awkward postures. Furthermore, ripening times for tomatoes can vary depending on the variety, preventing the harvest from being completed in a single harvest. Consequently, the work performed and postures adopted during harvest are constantly repeated. Although the fruits are hand-picked during tomato harvest, this is undesirable because it damages the flesh and reduces the fruit's value. For this reason, pruning shears are widely used during harvesting. The primary manual tasks in tomato harvesting include cutting the fruit from the bunches, placing them in crates, and transporting the crates to the storage area. During this process, workers maintain five different workstations while cutting the tomato bunches: kneeling, bending forward, squatting, standing, and reaching upward. Workers' working postures were recorded during harvesting, and the AWBA scoring scale, developed for agricultural use, was used. Accordingly, of the five workstations, reaching upward picking was found to be the highest, while other postures were found to have a high risk score. The high ergonomic risk, the repetitive movements, and the greenhouse climate during harvesting were found to be sufficient to cause musculoskeletal disorders in workers. Some simple mechanization recommendations have been developed to reduce the ergonomic risk score. It is considered important and necessary to implement and test these recommendations.
- 15 May 2024
- Published by Ondokuz Mayis University in Black Sea Journal of Agriculture
- Vol. 7 (3) , 274-279
Determination of Ergonomic Factors of the Backpack Blowers Used in the Windrow of Hazelnuts
Ergonomics plays an important role in the design and use of agricultural machinery to protect the health and safety of workers. Lack of ergonomic design negatively affects worker discomfort and safety. Therefore, ergonomic design should ensure that workers can work comfortably, maintain correct posture, and minimize the risk of injury. Especially workers using backpack machines are exposed to physical fatigue, posture problems, risk of injury, and ergonomic effects due to vibration and noise. Considering all these, this study was conducted to determine the ergonomic factors (ergonomic analysis of the operator's working posture, operator's fatigue values, noise level, and dust concentration) that the operator is exposed to as a result of different body positions and moving the air diverter hose while using the backpack type blowers used to windrow the kernel+husked nuts falling on the orchard ground during the hazelnut harvest period. According to this, in all three ergonomic risk methods, the operator's body posture was found to be risky, and ergonomic adjustments were needed. Again, the operator's fatigue value, noise level, and dust concentration were obtained as 10.43 kcal min-1, 91.70 dB(A)-106.20 dB(A) (average 98.95 dB(A)), 19.241-21.390 mg m-3-air ( average 20.315 mg m-3-air), respectively. The identification of ergonomic factors is also very important to improve the user experience, prevent occupational accidents, and improve machine performance in general. With the identification of these factors, optimized solutions for the safety and comfort of users will be put forward by adopting a human-centered approach in machine design.
- 15 May 2024
- Published by Ondokuz Mayis University in Black Sea Journal of Agriculture
- Vol. 7 (3) , 274-279
Determination of Ergonomic Factors of the Backpack Blowers Used in the Windrow of Hazelnuts
Ergonomics plays an important role in the design and use of agricultural machinery to protect the health and safety of workers. Lack of ergonomic design negatively affects worker discomfort and safety. Therefore, ergonomic design should ensure that workers can work comfortably, maintain correct posture, and minimize the risk of injury. Especially workers using backpack machines are exposed to physical fatigue, posture problems, risk of injury, and ergonomic effects due to vibration and noise. Considering all these, this study was conducted to determine the ergonomic factors (ergonomic analysis of the operator's working posture, operator's fatigue values, noise level, and dust concentration) that the operator is exposed to as a result of different body positions and moving the air diverter hose while using the backpack type blowers used to windrow the kernel+husked nuts falling on the orchard ground during the hazelnut harvest period. According to this, in all three ergonomic risk methods, the operator's body posture was found to be risky, and ergonomic adjustments were needed. Again, the operator's fatigue value, noise level, and dust concentration were obtained as 10.43 kcal min-1, 91.70 dB(A)-106.20 dB(A) (average 98.95 dB(A)), 19.241-21.390 mg m-3-air ( average 20.315 mg m-3-air), respectively. The identification of ergonomic factors is also very important to improve the user experience, prevent occupational accidents, and improve machine performance in general. With the identification of these factors, optimized solutions for the safety and comfort of users will be put forward by adopting a human-centered approach in machine design.
- Open Access
- 1 September 2023
- Published by Ondokuz Mayis University in Black Sea Journal of Agriculture
- Vol. 6 (5) , 524-527
Technical and Economic Examination of the Mechanical Hazelnut Collecting Machine Manufacturing
In this study, taking into account the conditions of Türkiye, it will be possible to harvest hazelnuts grown on flat and nearly flat lands, in line with ergonomic principles, with an approach that consider operator comfort and work safety, with a mechanically effective sweeping unit with high work success, which removes the kernel+husk hazelnut from the ground, some performance values of the hazelnut harvesting machine such as collecting efficiency, labor requirement, fieldwork success, product work success, and foreign material separation efficiency, which cleans the mixed hazelnuts in the separation unit at a level that does not affect the performance of the husk peeling machine and stores the cleaned grain+husk hazelnut mixture, were determined and obtained. In light of the data obtained, it is contribution to the economy is discussed. The collecting efficiency of the mechanical hazelnut harvesting machine was 93.26%, the labor requirement was 47.85 h/ha, the fieldwork success was 0.134 ha/h, the product work success was 295.92 kg/h, and the foreign material separation efficiency was 96.85%. Considering the performance values obtained, very successful results have obtained from the field trials performed with the mechanical hazelnut harvesting machine. As a result, the production of the hazelnut harvesting machine and its implementation will make hazelnut production sustainable by significantly reducing production costs, and the import of machinery that is not suitable for the conditions of Türkiye will be no longer needed.
- 1 September 2023
- Published by Ondokuz Mayis University in Black Sea Journal of Agriculture
- Vol. 6 (5) , 524-527
Open AccessTechnical and Economic Examination of the Mechanical Hazelnut Collecting Machine Manufacturing
In this study, taking into account the conditions of Türkiye, it will be possible to harvest hazelnuts grown on flat and nearly flat lands, in line with ergonomic principles, with an approach that consider operator comfort and work safety, with a mechanically effective sweeping unit with high work success, which removes the kernel+husk hazelnut from the ground, some performance values of the hazelnut harvesting machine such as collecting efficiency, labor requirement, fieldwork success, product work success, and foreign material separation efficiency, which cleans the mixed hazelnuts in the separation unit at a level that does not affect the performance of the husk peeling machine and stores the cleaned grain+husk hazelnut mixture, were determined and obtained. In light of the data obtained, it is contribution to the economy is discussed. The collecting efficiency of the mechanical hazelnut harvesting machine was 93.26%, the labor requirement was 47.85 h/ha, the fieldwork success was 0.134 ha/h, the product work success was 295.92 kg/h, and the foreign material separation efficiency was 96.85%. Considering the performance values obtained, very successful results have obtained from the field trials performed with the mechanical hazelnut harvesting machine. As a result, the production of the hazelnut harvesting machine and its implementation will make hazelnut production sustainable by significantly reducing production costs, and the import of machinery that is not suitable for the conditions of Türkiye will be no longer needed.
- Open Access
- 30 June 2023
- Published by Ordu University in Turkish Journal of Food and Agriculture Sciences
- Vol. 5 (1) , 1-6
Evaluation of employee positions by different ergonomic risk analysis methods in manual harvesting of hazelnuts
In this study, working postures during the manual harvesting of hazelnuts were analyzed with four different ergonomic risk assessment methods, namely REBA, AWBA, OWAS, and RULA, and the differences between them were revealed. The most appropriate method for manual harvesting activities was determined. Hand harvesting of hazelnuts; It consists of three main workstations: shaking the branches by hand, collecting them manually from the branches, and containing them manually from the ground. There are three different ways of sitting in the hand-harvesting of hazelnuts: standing on knees, bending over, or cross-legged. During the manual harvest, the workers' movements at all workstations were observed and recorded with a camera. Images were analyzed using the ErgoFellow 2.0 program. As a result of the analysis, working postures that may cause musculoskeletal disorders (MSD) were determined. According to the analysis results, shaking the hazelnut by hand and harvesting from the branch by hand were risky compared to the other three analysis methods, except for the Ovako Working Posture Analyzing System (OWAS) method. In manual harvesting from the ground, high-risk scores were obtained in all working postures, Rapid Entire Body Assessment (REBA), Agricultural Whole Body Assessment (AWBA), Rapid Upper Limb Assessment (RULA), and OWAS methods, and it was determined in the category of urgent action change. Among the ergonomic risk analysis methods, it can be said that AWBA is the analysis method that includes the closest positions of working postures in the manual harvest of hazelnuts
- 30 June 2023
- Published by Ordu University in Turkish Journal of Food and Agriculture Sciences
- Vol. 5 (1) , 1-6
Open AccessEvaluation of employee positions by different ergonomic risk analysis methods in manual harvesting of hazelnuts
In this study, working postures during the manual harvesting of hazelnuts were analyzed with four different ergonomic risk assessment methods, namely REBA, AWBA, OWAS, and RULA, and the differences between them were revealed. The most appropriate method for manual harvesting activities was determined. Hand harvesting of hazelnuts; It consists of three main workstations: shaking the branches by hand, collecting them manually from the branches, and containing them manually from the ground. There are three different ways of sitting in the hand-harvesting of hazelnuts: standing on knees, bending over, or cross-legged. During the manual harvest, the workers' movements at all workstations were observed and recorded with a camera. Images were analyzed using the ErgoFellow 2.0 program. As a result of the analysis, working postures that may cause musculoskeletal disorders (MSD) were determined. According to the analysis results, shaking the hazelnut by hand and harvesting from the branch by hand were risky compared to the other three analysis methods, except for the Ovako Working Posture Analyzing System (OWAS) method. In manual harvesting from the ground, high-risk scores were obtained in all working postures, Rapid Entire Body Assessment (REBA), Agricultural Whole Body Assessment (AWBA), Rapid Upper Limb Assessment (RULA), and OWAS methods, and it was determined in the category of urgent action change. Among the ergonomic risk analysis methods, it can be said that AWBA is the analysis method that includes the closest positions of working postures in the manual harvest of hazelnuts