Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sarit Nov has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Utilization of Municipal Solid Waste Ash in Concrete Blends in Israel Part B: Combustion in a Semi-Industrial Incinerator

    by Sarit Nov, Shay Barak, Haim Cohen, Yaniv Knop

    This study (Part B) examines the potential utilization of municipal solid waste (MSW) ash, produced in a semi-industrial incinerator in Israel, as a partial substitute for cement and natural sand in industrial concrete mixtures. The ash was produced at the temperature range 600–850 °C, and the ash was characterized using XRD and SEM to determine its mineralogical composition and morphology. The results indicate that ash composition is dominated by calcium-rich phases, with hatrurite (Ca3SiO5) representing approximately 51–66 wt.% of the identified crystalline phases, along with calcite, MgO, and silica phases. The ash consists of irregular, porous particles with a broad distribution. Concrete performance was evaluated in both fresh and hardened states. In terms of fresh concrete properties, it is observed that concrete containing ash showed improved workability, better workability retention, and better concrete density compared to concrete without ash. In terms of hardened concrete properties, the use of MSW ash as a partial sand replacement preserved the mechanical performance of the concrete, with compressive strength remaining within approximately 2% of the reference mixture. These findings suggest that semi-industrially produced MSW ash is more suitable as a fine aggregate replacement than as a supplementary cementitious material and represents a promising route for reducing landfill disposal and promoting circular economy practices in the construction industry.


  • Open Access

    Potential Utilization of Municipal Solid Waste Ash in Concrete Blends in Israel Part A: Municipal Waste Combustion in the Laboratory

    by Sarit Nov, Shay Barak, Haim Cohen, Yaniv Knop

    This study investigated the potential use of ash derived from Municipal Solid Waste (MSW), typically destined for landfill in Israel, as a partial replacement for cement and aggregates in concrete mixtures, aligning with circular economy and sustainable construction objectives. MSW samples (post-metal and large plastic remains removal), supplied by the Dudaim Reclamation Center in Israel, were incinerated under controlled conditions in an upgraded laboratory furnace to produce ash. The ash content in the Israeli MSW was 18% ash. The ash consisted mainly of calcium-based minerals, including anhydrite (CaSO4), alite (3CaO·SiO2), and calcite (CaCO3), with minor quartz content, indicating potential pozzolanic behavior. The characterization results showed that appreciable amounts of ash produced from MSW incineration in Israel can be used as a partial replacement for cement and fine aggregates when properly treated. This study successfully established a laboratory-scale incineration process for Israeli MSW. The resulting ash was characterized, confirming its potential as a raw material for concrete applications, thereby paving the way for future studies on its performance as a partial substitute for cement and fine aggregates in concrete blends.


  • Open Access

    Treated Oil Shale Ashes as Cement and Fine Aggregates Substitutes for the Concrete Industry

    by Sarit Nov, Shay Barak, Haim Cohen, Yaniv Knop

    The increased global demand for energy and the environmental concerns associated with fossil fuels highlight the need for alternative approaches. Fossil fuel combustion, particularly coal and oil shale, contributes to greenhouse gas emissions and generates large amounts of ash residues, posing environmental challenges. This study focuses on the potential of thermal treatment to upgrade oil shale bottom ash (OSBA) for use as a cement replacement in concrete, addressing both the economic viability of oil shale combustion and the environmental issue of ash waste management. The findings have significant implications for improving the economics and environmental sustainability of oil shale combustion in construction. By enhancing the properties of OSBA, this study contributes to the advancement of greener energy solutions and waste management practices in the energy and construction sectors.


  • Open Access

    Neutralization of Acidic Industrial Wastes and Fixation of Trace Element by Oil Shale Ash: Formation of a Green Product

    by Sarit Nov, Aviv Hassid, Shay Barak, Haim Cohen, Yaniv Knop

    Oil shale is a rock that contains organic matter in aconcentrationthat allows it to be used as an energy source. As a result of theshale combustion process, large amounts of two types of ash are formed:fly ash (similar to 10%) and bottom ash (similar to 90%). At present, inIsrael, only fly oil shale ash is used, which constitutes a minorityof the oil shale burn products, whereas bottom oil shale ash is accumulatedas waste. Bottom ash contains a high percentage of calcium in theform of anhydrite (CaSO4) and calcite (CaCO3). Thus, it can be used to neutralize acidic waste and to fix traceelements. This study examined the process of scrubbing the acid wasteby the ash, its characterization pre- and post-upgrade treatment,to test its suitability as a partial substitute for aggregates, naturalsand, and cement in concrete mixtures. In the current study, we comparedthe chemical and physical characterization of oil shale bottom ashbefore and after upgrading the ash via chemical treatment. In addition,its utilization as a scrubbing reagent for acidic wastes from thephosphate industry was studied.