Marta Adame-Pereira
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marta Adame-Pereira has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Carlos Javier Durán Valle
Instituto del Agua, Cambio Climático y Sostenibilidad, Universidad de Extremadura, 06006 Badajoz, Spain
8 shared publications - Adrián Bonilla-Petriciolet
Department of Chemical Engineering, Instituto Tecnológico de Aguascalientes, Aguascalientes 20256, Mexico
3 shared publications - Astrid Guadalupe Cortes-Cruz
Academic Area of Chemistry, Institute of Basic Sciences and Engineering, Autonomous University of the State of Hidalgo, Mineral de la Reforma 42184, Hidalgo, Mexico
2 shared publications - Hilda Elizabeth Reynel-Ávila
Tecnológico Nacional de México, Instituto Tecnológico de Aguascalientes, Aguascalientes 20256, Mexico
2 shared publications - Ignacio M. López-Coca
Department of Organic and Inorganic Chemistry, School of Technology, Universidad de Extremadura, 10003 Cáceres, Spain
2 shared publications - Regina Celia Carvalho
Departamento de Química Orgánica e Inorgánica, Universidad de Extremadura, Avda. de Elvas, s/n, 06006 Badajoz, Spain
2 shared publications
Latest Publications
- Open Access
Hydrothermal Modification of Activated Carbon Enhances Acetaminophen Adsorption: Experimental and Computational Evidence of π–π Interaction Dominance
Acetaminophen (APAP) is a widely used pharmaceutical increasingly detected as a contaminant in aquatic environments due to its persistent nature and incomplete removal by conventional wastewater treatment. This study investigates the adsorption performance and mechanisms of commercial activated carbon (M) and its hydrothermally modified form (MH) for APAP removal. Characterization via elemental analysis, X-ray photoelectron spectroscopy (XPS), and N2 adsorption isotherms revealed that hydrothermal treatment reduced oxygen content and enhanced micro- and mesopore volumes, resulting in a more homogeneous and carbon-rich surface. Batch adsorption experiments conducted under varying pH (5–7) and temperature (30–40 °C) conditions showed that MH achieved up to 94.3% APAP removal, outperforming the untreated carbon by more than 15%. Kinetic modeling indicated that adsorption followed a pseudo-second-order mechanism (R2 > 0.99), and isotherm data fitted best to the Langmuir model for MH and the Freundlich model for M, reflecting their differing surface properties. Adsorption was enhanced at lower pH and higher temperatures, consistent with an endothermic and pH-dependent mechanism. Complementary density functional theory (DFT) simulations confirmed that π–π stacking is the dominant interaction between APAP and the carbon surface. The most favorable configuration involved coplanar stacking with non-oxidized graphene (ΔG = −33 kJ/mol), while oxidized graphene models exhibited weaker interactions. Natural Bond Orbital (NBO) analysis further supported the prevalence of π–π interactions over dipole interactions. These findings suggest that surface deoxygenation and improved pore architecture achieved via hydrothermal treatment significantly enhance APAP adsorption, offering a scalable strategy for pharmaceutical pollutant removal in water treatment applications.
Open AccessHydrothermal Modification of Activated Carbon Enhances Acetaminophen Adsorption: Experimental and Computational Evidence of π–π Interaction Dominance
Acetaminophen (APAP) is a widely used pharmaceutical increasingly detected as a contaminant in aquatic environments due to its persistent nature and incomplete removal by conventional wastewater treatment. This study investigates the adsorption performance and mechanisms of commercial activated carbon (M) and its hydrothermally modified form (MH) for APAP removal. Characterization via elemental analysis, X-ray photoelectron spectroscopy (XPS), and N2 adsorption isotherms revealed that hydrothermal treatment reduced oxygen content and enhanced micro- and mesopore volumes, resulting in a more homogeneous and carbon-rich surface. Batch adsorption experiments conducted under varying pH (5–7) and temperature (30–40 °C) conditions showed that MH achieved up to 94.3% APAP removal, outperforming the untreated carbon by more than 15%. Kinetic modeling indicated that adsorption followed a pseudo-second-order mechanism (R2 > 0.99), and isotherm data fitted best to the Langmuir model for MH and the Freundlich model for M, reflecting their differing surface properties. Adsorption was enhanced at lower pH and higher temperatures, consistent with an endothermic and pH-dependent mechanism. Complementary density functional theory (DFT) simulations confirmed that π–π stacking is the dominant interaction between APAP and the carbon surface. The most favorable configuration involved coplanar stacking with non-oxidized graphene (ΔG = −33 kJ/mol), while oxidized graphene models exhibited weaker interactions. Natural Bond Orbital (NBO) analysis further supported the prevalence of π–π interactions over dipole interactions. These findings suggest that surface deoxygenation and improved pore architecture achieved via hydrothermal treatment significantly enhance APAP adsorption, offering a scalable strategy for pharmaceutical pollutant removal in water treatment applications.
- Open Access
- 17 September 2025
- Published by MDPI AG in Preprints.org
Hydrothermal Modification of Activated Carbon Enhances Acetaminophen Adsorption: Experimental and Computational Evidence of π–π Interaction Dominance
Acetaminophen (APAP) is a widely used pharmaceutical increasingly detected as a contaminant in aquatic environments due to its persistent nature and incomplete removal by conventional wastewater treatment. This study investigates the adsorption performance and mechanisms of commercial activated carbon (M) and its hydrothermally modified form (MH) for APAP removal. Characterization via elemental analysis, X-ray photoelectron spectroscopy (XPS), and N2 adsorption isotherms revealed that hydrothermal treatment reduced oxygen content and enhanced micro- and mesopore volumes, resulting in a more homogeneous and carbon-rich surface. Batch adsorption experiments conducted under varying pH (5–7) and temperature (30–40 °C) conditions showed that MH achieved up to 94.3% APAP removal, outperforming the untreated carbon by more than 15%. Kinetic modeling indicated that adsorption followed a pseudo-second-order mechanism (R² > 0.99), and isotherm data fitted best to the Langmuir model for MH and the Freundlich model for M, reflecting their differing surface properties. Adsorption was enhanced at lower pH and higher temperatures, consistent with an endothermic and pH-dependent mechanism. Complementary density functional theory (DFT) simulations confirmed that π–π stacking is the dominant interaction between APAP and the carbon surface. The most favorable configuration involved coplanar stacking with non-oxidized graphene (ΔG = −33 kJ/mol), while oxidized graphene models exhibited weaker interactions. Natural Bond Orbital (NBO) analysis further supported the prevalence of π–π interactions over dipole interactions. These findings suggest that surface deoxygenation and improved pore architecture achieved via hydrothermal treatment significantly enhance APAP adsorption, offering a scalable strategy for pharmaceutical pollutant removal in water treatment applications.
- 17 September 2025
- Published by MDPI AG in Preprints.org
Open AccessHydrothermal Modification of Activated Carbon Enhances Acetaminophen Adsorption: Experimental and Computational Evidence of π–π Interaction Dominance
Acetaminophen (APAP) is a widely used pharmaceutical increasingly detected as a contaminant in aquatic environments due to its persistent nature and incomplete removal by conventional wastewater treatment. This study investigates the adsorption performance and mechanisms of commercial activated carbon (M) and its hydrothermally modified form (MH) for APAP removal. Characterization via elemental analysis, X-ray photoelectron spectroscopy (XPS), and N2 adsorption isotherms revealed that hydrothermal treatment reduced oxygen content and enhanced micro- and mesopore volumes, resulting in a more homogeneous and carbon-rich surface. Batch adsorption experiments conducted under varying pH (5–7) and temperature (30–40 °C) conditions showed that MH achieved up to 94.3% APAP removal, outperforming the untreated carbon by more than 15%. Kinetic modeling indicated that adsorption followed a pseudo-second-order mechanism (R² > 0.99), and isotherm data fitted best to the Langmuir model for MH and the Freundlich model for M, reflecting their differing surface properties. Adsorption was enhanced at lower pH and higher temperatures, consistent with an endothermic and pH-dependent mechanism. Complementary density functional theory (DFT) simulations confirmed that π–π stacking is the dominant interaction between APAP and the carbon surface. The most favorable configuration involved coplanar stacking with non-oxidized graphene (ΔG = −33 kJ/mol), while oxidized graphene models exhibited weaker interactions. Natural Bond Orbital (NBO) analysis further supported the prevalence of π–π interactions over dipole interactions. These findings suggest that surface deoxygenation and improved pore architecture achieved via hydrothermal treatment significantly enhance APAP adsorption, offering a scalable strategy for pharmaceutical pollutant removal in water treatment applications.
- Open Access
Purification of Biodiesel Polluted by Copper Using an Activated Carbon Prepared from Spent Coffee Grounds: Adsorption Property Tailoring, Batch and Packed-Bed Studies
Biodiesel produced via oil transesterification often contains metallic impurities, such as copper, which affects its quality and engine performance. This study explores the use of activated carbon prepared from spent coffee grounds to remove copper from biodiesel. Activated carbon samples were prepared via biomass pyrolysis and chemical activation with KOH and HNO3. The optimal conditions for copper adsorption were determined using a Taguchi L9 design. Maximum adsorption capacities were 13.4 and 17.3 mg/g at 30 and 40 °C, respectively, in batch adsorbers. In packed-bed columns, the axial dispersion reduced the adsorption efficiency obtaining bed adsorption capacities from 1.9 to 5.1 mg/g under tested experimental conditions. Adsorbent characterization and adsorption modeling indicated that copper removal was driven by multi-cationic interactions, where carboxylic groups from carbon surface acted as key active sites. The new adsorbent outperformed commercial bone char, making it a cost-effective alternative to improve biodiesel production contributing to the energy matrix diversification.
Open AccessPurification of Biodiesel Polluted by Copper Using an Activated Carbon Prepared from Spent Coffee Grounds: Adsorption Property Tailoring, Batch and Packed-Bed Studies
Biodiesel produced via oil transesterification often contains metallic impurities, such as copper, which affects its quality and engine performance. This study explores the use of activated carbon prepared from spent coffee grounds to remove copper from biodiesel. Activated carbon samples were prepared via biomass pyrolysis and chemical activation with KOH and HNO3. The optimal conditions for copper adsorption were determined using a Taguchi L9 design. Maximum adsorption capacities were 13.4 and 17.3 mg/g at 30 and 40 °C, respectively, in batch adsorbers. In packed-bed columns, the axial dispersion reduced the adsorption efficiency obtaining bed adsorption capacities from 1.9 to 5.1 mg/g under tested experimental conditions. Adsorbent characterization and adsorption modeling indicated that copper removal was driven by multi-cationic interactions, where carboxylic groups from carbon surface acted as key active sites. The new adsorbent outperformed commercial bone char, making it a cost-effective alternative to improve biodiesel production contributing to the energy matrix diversification.
- Open Access
- 15 January 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (2) , 807
Catalytic Screening for 1,2-Diol Protection: A Saccharose-Derived Hydrothermal Carbon Showcases Enhanced Performance
A benchmarking study is reported on a series of modified carbocatalysts to efficiently promote the acetalization of 1,2-diols under heterogeneous conditions. Among the catalysts surveyed, a hydrothermal carbon generated from saccharose, a cheap, abundant, and biobased material, showed excellent performance when tested on two representative diols. All catalysts have been thoroughly characterized, focusing on surface acidity and composition. Optimal working parameters such as temperature and catalyst loading could be established. Remarkably, sonication improved the diol protection, which proceeded faster at 25 °C. The catalyst could be easily recycled and reused several times. In addition, the protocol was successfully translated from batch to continuous flow operation using a packed-bed reactor.
- 15 January 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (2) , 807
Open AccessCatalytic Screening for 1,2-Diol Protection: A Saccharose-Derived Hydrothermal Carbon Showcases Enhanced Performance
A benchmarking study is reported on a series of modified carbocatalysts to efficiently promote the acetalization of 1,2-diols under heterogeneous conditions. Among the catalysts surveyed, a hydrothermal carbon generated from saccharose, a cheap, abundant, and biobased material, showed excellent performance when tested on two representative diols. All catalysts have been thoroughly characterized, focusing on surface acidity and composition. Optimal working parameters such as temperature and catalyst loading could be established. Remarkably, sonication improved the diol protection, which proceeded faster at 25 °C. The catalyst could be easily recycled and reused several times. In addition, the protocol was successfully translated from batch to continuous flow operation using a packed-bed reactor.
- Open Access
Unlocking the Potential of Chemically Modified Carbon Gels in Gallic Acid Adsorption
This study deals with the preparation of adsorbents from a commercial xerogel by chemically modifying its surface with concentrated mineral acids and alkali metal chlorides, their physicochemical characterization, and their use as adsorbents for gallic acid in aqueous solution. Although there are publications on the use of carbon xerogels as adsorbents, we propose and study simple modifications that can change their chemical properties and, therefore, their performance as adsorbents. The adsorbate of choice is gallic acid and, to our knowledge, there is no history of its adsorption with carbon xerogels. The prepared adsorbents have a high specific surface area (347–563 m2 g−1), better pore development for samples treated with alkali metal chlorides than with mineral acids, and are more acidic than the initial xerogel (p.z.c range 2.49–6.87 vs. 7.20). The adsorption equilibrium is reached in −1 for the pseudo-second-order model. The adsorption capacity, according to the Langmuir model, reaches 62.89 to 83.33 mg g−1. The adsorption properties of the commercial xerogel improved over a wide range of pH values and temperatures. The experimental results indicate that the adsorption process is thermodynamically favored.
Open AccessUnlocking the Potential of Chemically Modified Carbon Gels in Gallic Acid Adsorption
This study deals with the preparation of adsorbents from a commercial xerogel by chemically modifying its surface with concentrated mineral acids and alkali metal chlorides, their physicochemical characterization, and their use as adsorbents for gallic acid in aqueous solution. Although there are publications on the use of carbon xerogels as adsorbents, we propose and study simple modifications that can change their chemical properties and, therefore, their performance as adsorbents. The adsorbate of choice is gallic acid and, to our knowledge, there is no history of its adsorption with carbon xerogels. The prepared adsorbents have a high specific surface area (347–563 m2 g−1), better pore development for samples treated with alkali metal chlorides than with mineral acids, and are more acidic than the initial xerogel (p.z.c range 2.49–6.87 vs. 7.20). The adsorption equilibrium is reached in −1 for the pseudo-second-order model. The adsorption capacity, according to the Langmuir model, reaches 62.89 to 83.33 mg g−1. The adsorption properties of the commercial xerogel improved over a wide range of pH values and temperatures. The experimental results indicate that the adsorption process is thermodynamically favored.
- Open Access
- 25 January 2024
- Published by MDPI AG in Preprints.org
Unlocking the Potential of Chemically Modified Carbon Gels in Gallic Acid Adsorption
This study deals with the preparation of adsorbents from a commercial xerogel by chemically modifying its surface with concentrated mineral acids and alkali metal chlorides, their physicochemical characterization, and their use as adsorbents for gallic acid in aqueous solution. The prepared adsorbents have a high specific surface area (347-563 m2 g-1), better pore development for samples treated with alkali metal chlorides than with mineral acids and are more acidic than the initial xerogel (p.z.c range 2.49-6.87 vs. 7.20). The adsorption properties of the commercial xerogel improved over a wide range of pH and temperature. The experimental results indicate that the adsorption process is thermodynamically favored.
- 25 January 2024
- Published by MDPI AG in Preprints.org
Open AccessUnlocking the Potential of Chemically Modified Carbon Gels in Gallic Acid Adsorption
This study deals with the preparation of adsorbents from a commercial xerogel by chemically modifying its surface with concentrated mineral acids and alkali metal chlorides, their physicochemical characterization, and their use as adsorbents for gallic acid in aqueous solution. The prepared adsorbents have a high specific surface area (347-563 m2 g-1), better pore development for samples treated with alkali metal chlorides than with mineral acids and are more acidic than the initial xerogel (p.z.c range 2.49-6.87 vs. 7.20). The adsorption properties of the commercial xerogel improved over a wide range of pH and temperature. The experimental results indicate that the adsorption process is thermodynamically favored.
- Open Access
Hydrothermal Carbon Coating of an Activated Carbon—A New Adsorbent
A new adsorbent material was prepared by coating an activated carbon with hydrothermal carbon obtained from sucrose. The material obtained has different properties from the sum of the properties of the activated carbon and the hydrothermal carbon, which shows that a new material was obtained. It has a high specific surface area (1051.9 m2 g−1) and is slightly more acidic than the starting activated carbon (p.z.c.-point of zero charge 8.71 vs. 9.09). The adsorptive properties of a commercial carbon (Norit RX-3 Extra) were improved over a wide pH and temperature range. The capacity values of the monolayer according to Langmuir’s model reached 588 mg g−1 for the commercial product and 769 mg g−1 for the new adsorbent.
Open AccessHydrothermal Carbon Coating of an Activated Carbon—A New Adsorbent
A new adsorbent material was prepared by coating an activated carbon with hydrothermal carbon obtained from sucrose. The material obtained has different properties from the sum of the properties of the activated carbon and the hydrothermal carbon, which shows that a new material was obtained. It has a high specific surface area (1051.9 m2 g−1) and is slightly more acidic than the starting activated carbon (p.z.c.-point of zero charge 8.71 vs. 9.09). The adsorptive properties of a commercial carbon (Norit RX-3 Extra) were improved over a wide pH and temperature range. The capacity values of the monolayer according to Langmuir’s model reached 588 mg g−1 for the commercial product and 769 mg g−1 for the new adsorbent.
- 24 March 2020
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 28 (19) , 24342-24354
Adsorption of bisphenol A by activated carbon developed from PET waste by KOH activation
This study deals with the preparation of activated carbon (AC) from poly(ethylene terephthalate) (PET) waste and with the physicochemical characterization of AC and its use as adsorbent of bisphenol A (BPA) in aqueous solution. AC was prepared by chemical activation with KOH and by physical activation in steam. The activation with KOH was carried out by impregnation first of PET by wet and dry routes at the PET/KOH weight ratios of 1:1, 1:3, and 1:5 and by carbonization then of the resulting products at 850 °C for 2 h in N2 atmosphere. The activation in steam was performed by heating at 900 °C for 1 h. The ACs were characterized by N2 adsorption at − 196 °C, mercury porosity, mercury density measurements, FT-IR spectroscopy, and measurement of pH of the point of zero charge (pHpzc). The activation yield is 58.4–49.4% with KOH in aqueous solution, 75.8–23.9% with solid KOH, and 5.9% with steam. Using solid KOH, greater developments of a more heterogeneous porosity with increasing impregnation PET/KOH ratio are achieved. For SK1:5, SBET is 1990 m2 g−1 and the pore volumes are 0.71 cm3 g−1, micropores; 0.81 cm3 g−1, mesopores; and 1.77 cm3 g−1, macropores. The data of BPA adsorption fit better to the Ho and Mckay second order kinetic model than to the Lagergren first-order kinetic model and to the Langmuir equation than to the Freundlich equation. From the kinetic and thermodynamic standpoints, the adsorption process of BPA is more favorable for SK1:5.
- 24 March 2020
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 28 (19) , 24342-24354
Adsorption of bisphenol A by activated carbon developed from PET waste by KOH activation
This study deals with the preparation of activated carbon (AC) from poly(ethylene terephthalate) (PET) waste and with the physicochemical characterization of AC and its use as adsorbent of bisphenol A (BPA) in aqueous solution. AC was prepared by chemical activation with KOH and by physical activation in steam. The activation with KOH was carried out by impregnation first of PET by wet and dry routes at the PET/KOH weight ratios of 1:1, 1:3, and 1:5 and by carbonization then of the resulting products at 850 °C for 2 h in N2 atmosphere. The activation in steam was performed by heating at 900 °C for 1 h. The ACs were characterized by N2 adsorption at − 196 °C, mercury porosity, mercury density measurements, FT-IR spectroscopy, and measurement of pH of the point of zero charge (pHpzc). The activation yield is 58.4–49.4% with KOH in aqueous solution, 75.8–23.9% with solid KOH, and 5.9% with steam. Using solid KOH, greater developments of a more heterogeneous porosity with increasing impregnation PET/KOH ratio are achieved. For SK1:5, SBET is 1990 m2 g−1 and the pore volumes are 0.71 cm3 g−1, micropores; 0.81 cm3 g−1, mesopores; and 1.77 cm3 g−1, macropores. The data of BPA adsorption fit better to the Ho and Mckay second order kinetic model than to the Lagergren first-order kinetic model and to the Langmuir equation than to the Freundlich equation. From the kinetic and thermodynamic standpoints, the adsorption process of BPA is more favorable for SK1:5.