Harindra S. Mavikumbure
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Harindra S. Mavikumbure has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Victor Cobilean
Computer Science Department, Virginia Commonwealth University, Richmond, VA, USA
5 shared publications - Milos Manic
Department of Computer Science, Virginia Commonwealth University, Richmond, VA 23284, USA
4 shared publications - Craig Rieger
Idaho National Laboratory, Idaho Falls, ID, USA
3 shared publications - Chathurika Wickramasinghe
Young Professionals Virginia Commonwealth University
2 shared publications - Daniel L. Marino
Department of Computer Science, Virginia Commonwealth University, Richmond, VA, USA
2 shared publications Benny J. Varghese
Idaho National Laboratory, Idaho Falls, ID, USA
1 shared publication
Latest Publications
- 1 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Biomedical and Health Informatics
- Vol. 29 (11) , 8164-8174
Investigating Membership Inference Attacks Against CNN Models for BCI Systems
As Deep Learning (DL) algorithms become more widely adopted in healthcare applications, there is a greater emphasis on understanding and addressing potential privacy risks associated with these models. The purpose of this study is to investigate the privacy vulnerabilities of the Convolutional Neural Network (CNN) classifiers for Electroencephalogram (EEG) data in the Brain-Computer Interfaces (BCIs). Specifically, it focuses on the Membership Inference Attack (MIA), which seeks to determine if data from an individual were used in model training. The novelty of this work lies in its empirical analysis of MIA, specifically by addressing two key challenges that are less common in other domains: 1) datasets that are heterogeneous and 2) spatial-temporal design choices. Motivated by these challenges, we investigate the susceptibility to MIA based on: 1) specifics of the training dataset (number of participants, demographics), and 2) specifics of the CNN (such as architecture, regularization). Our experiments revealed that an adversary with limited knowledge of the model and its training process can compromise the privacy of training participants, noting that the same attack is not effective against deep learning models trained on image and tabular datasets. Some of our findings are: 1) training on diverse participant datasets improves the privacy of the most participants but increases risks of memorization and vulnerabilities for underrepresented groups; 2) regularization is less effective in defending against the MIA for EEG data CNN classifiers when compared to other types of input data; 3) depth and width of model architecture has no impact on membership attack effectiveness. We hope that the presented insights will assist future researchers develop more privacy-aware deep learning based BCI systems.
- 1 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Biomedical and Health Informatics
- Vol. 29 (11) , 8164-8174
Investigating Membership Inference Attacks Against CNN Models for BCI Systems
As Deep Learning (DL) algorithms become more widely adopted in healthcare applications, there is a greater emphasis on understanding and addressing potential privacy risks associated with these models. The purpose of this study is to investigate the privacy vulnerabilities of the Convolutional Neural Network (CNN) classifiers for Electroencephalogram (EEG) data in the Brain-Computer Interfaces (BCIs). Specifically, it focuses on the Membership Inference Attack (MIA), which seeks to determine if data from an individual were used in model training. The novelty of this work lies in its empirical analysis of MIA, specifically by addressing two key challenges that are less common in other domains: 1) datasets that are heterogeneous and 2) spatial-temporal design choices. Motivated by these challenges, we investigate the susceptibility to MIA based on: 1) specifics of the training dataset (number of participants, demographics), and 2) specifics of the CNN (such as architecture, regularization). Our experiments revealed that an adversary with limited knowledge of the model and its training process can compromise the privacy of training participants, noting that the same attack is not effective against deep learning models trained on image and tabular datasets. Some of our findings are: 1) training on diverse participant datasets improves the privacy of the most participants but increases risks of memorization and vulnerabilities for underrepresented groups; 2) regularization is less effective in defending against the MIA for EEG data CNN classifiers when compared to other types of input data; 3) depth and width of model architecture has no impact on membership attack effectiveness. We hope that the presented insights will assist future researchers develop more privacy-aware deep learning based BCI systems.
- 7 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (4) , 9904-9917
Cy-Phy ADS: Cyber-Physical Anomaly Detection Framework for EV Charging Systems
Today’s large-scale Electric Vehicle (EV) infrastructures are heavily dependent on information communication technologies to maintain their operation and to support communication within sub-system components as well as the outside world. These technologies are vulnerable to various cyber and physical threats. Timely identification and mitigation of these threats are critical for improving human safety, avoiding economic losses, and preventing catastrophic system failures. By addressing this, our work presents a ResNet Autoencoder (AE) based Cyber-Physical Anomaly Detection System (Cy-Phy ADS) for detecting anomalies in EV Controller Area Network (CAN) protocol communication. It consists of four main components: Cyber-Physical Feature Extractor, ResNet AE-based Anomaly Detection Framework, Cyber-Physical Health Metric (CPHM), and Visualization Dashboard. The presented framework was trained and tested using CAN data collected from the EV charging system testbed at the Idaho National Laboratory. The presented Cy-Phy ADS compared against six widely used unsupervised anomaly detection algorithms: One Class Support Vector Machine (OCSVM), Variational Autoencoder (VAE), LSTM Autoencoder (LSTM AE), Isolation Forest (IForest), Principle Component Analysis (PCA) and Local Outlier Factor (LOF). The presented approach showed the highest accuracy among the compared methods. Further, the proposed approach showed comparable performance in terms of precision, F1, and False positive rate. It also showed the lowest training and inference time compared to the neural network-based baseline algorithms compared against with. Additionally, the Cy-Phy ADS has advantages such as unsupervised training, the ability to provide a holistic metric for system health characterization, and non-linear feature extraction.
- 7 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (4) , 9904-9917
Cy-Phy ADS: Cyber-Physical Anomaly Detection Framework for EV Charging Systems
Today’s large-scale Electric Vehicle (EV) infrastructures are heavily dependent on information communication technologies to maintain their operation and to support communication within sub-system components as well as the outside world. These technologies are vulnerable to various cyber and physical threats. Timely identification and mitigation of these threats are critical for improving human safety, avoiding economic losses, and preventing catastrophic system failures. By addressing this, our work presents a ResNet Autoencoder (AE) based Cyber-Physical Anomaly Detection System (Cy-Phy ADS) for detecting anomalies in EV Controller Area Network (CAN) protocol communication. It consists of four main components: Cyber-Physical Feature Extractor, ResNet AE-based Anomaly Detection Framework, Cyber-Physical Health Metric (CPHM), and Visualization Dashboard. The presented framework was trained and tested using CAN data collected from the EV charging system testbed at the Idaho National Laboratory. The presented Cy-Phy ADS compared against six widely used unsupervised anomaly detection algorithms: One Class Support Vector Machine (OCSVM), Variational Autoencoder (VAE), LSTM Autoencoder (LSTM AE), Isolation Forest (IForest), Principle Component Analysis (PCA) and Local Outlier Factor (LOF). The presented approach showed the highest accuracy among the compared methods. Further, the proposed approach showed comparable performance in terms of precision, F1, and False positive rate. It also showed the lowest training and inference time compared to the neural network-based baseline algorithms compared against with. Additionally, the Cy-Phy ADS has advantages such as unsupervised training, the ability to provide a holistic metric for system health characterization, and non-linear feature extraction.
- Open Access
- 7 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 124725-124737
Spintronic Physical Reservoir for Autonomous Prediction and Long-Term Household Energy Load Forecasting
With the growing use of artificial neural networks (ANNs) in temporal data processing tasks, the cost of training for complex ANNs is an escalating concern. Physical reservoir computing (RC), a variation of recurrent neural networks (RNNs), obviate the need for most data intensive matrix vector multiplication in the recurrent layer by evolving the RC’s internal states with the inherent nonlinear dynamics and short-term memory. In this study, we show that magnetic skyrmion confined in a fixed geometry forming the soft layer of a magnetic tunnel junction (MTJ) can work as a RC and perform autonomous long-term prediction of temporal data. Our proposed skyrmion reservoir allows for manipulation of spin dynamics with ultra energy efficient voltage controlled magnetic anisotropy modulation (VCMA) method. Furthermore, the boundary effect on the skyrmion from the geometric edges provides necessary consistency property of the reservoir. We employ our proposed reservoir for the modeling and prediction of the chaotic time series such as Mackey-Glass and dynamic time-series data, such as household building energy loads. For autonomous run, the predicted output is fed to the input of the reservoir. By comparing our spintronic physical RC approach with energy load forecasting algorithms, such as LSTMs and RNNs, we conclude that the proposed framework presents good performance in achieving high predictions accuracy, while also requiring low memory and energy both of which are at a premium in hardware resource and power constrained edge applications. Further, the proposed approach is shown to require very small training datasets and at the same time being at least 16× energy efficient compared to the sequence to sequence LSTM for accurate household load predictions. Higher endurance, fast processing and well-established technology (i.e., MTJ) to integrate with CMOS technology makes such spintronic reservoir attractive over other emergent memory device-based reservoirs.
- 7 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 124725-124737
Open AccessSpintronic Physical Reservoir for Autonomous Prediction and Long-Term Household Energy Load Forecasting
With the growing use of artificial neural networks (ANNs) in temporal data processing tasks, the cost of training for complex ANNs is an escalating concern. Physical reservoir computing (RC), a variation of recurrent neural networks (RNNs), obviate the need for most data intensive matrix vector multiplication in the recurrent layer by evolving the RC’s internal states with the inherent nonlinear dynamics and short-term memory. In this study, we show that magnetic skyrmion confined in a fixed geometry forming the soft layer of a magnetic tunnel junction (MTJ) can work as a RC and perform autonomous long-term prediction of temporal data. Our proposed skyrmion reservoir allows for manipulation of spin dynamics with ultra energy efficient voltage controlled magnetic anisotropy modulation (VCMA) method. Furthermore, the boundary effect on the skyrmion from the geometric edges provides necessary consistency property of the reservoir. We employ our proposed reservoir for the modeling and prediction of the chaotic time series such as Mackey-Glass and dynamic time-series data, such as household building energy loads. For autonomous run, the predicted output is fed to the input of the reservoir. By comparing our spintronic physical RC approach with energy load forecasting algorithms, such as LSTMs and RNNs, we conclude that the proposed framework presents good performance in achieving high predictions accuracy, while also requiring low memory and energy both of which are at a premium in hardware resource and power constrained edge applications. Further, the proposed approach is shown to require very small training datasets and at the same time being at least 16× energy efficient compared to the sequence to sequence LSTM for accurate household load predictions. Higher endurance, fast processing and well-established technology (i.e., MTJ) to integrate with CMOS technology makes such spintronic reservoir attractive over other emergent memory device-based reservoirs.
- 24 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 24 (12) , 14051-14063
RX-ADS: Interpretable Anomaly Detection Using Adversarial ML for Electric Vehicle CAN Data
Recent year has brought considerable advancements in Electric Vehicles (EVs) and associated infrastructures/communications. Intrusion Detection Systems (IDS) are widely deployed for anomaly detection in such critical infrastructures. This paper presents an Interpretable Anomaly Detection System (RX-ADS) for intrusion detection in CAN protocol communication in EVs. Contributions include: 1) Feature Extractor; 2) Anomaly Detection System; and 3) Explanation Generator for detected anomalies. The presented approach was tested on two benchmark CAN datasets: OTIDS and Car Hacking. The anomaly detection performance of RX-ADS was compared against the state-of-the-art approaches on these datasets: HIDS and GIDS. The RX-ADS approach showed comparable performance to the HIDS approach on OTIDS dataset and outperformed HIDS and GIDS approaches on Car Hacking dataset. Further, the proposed approach was able to generate explanations for detected abnormal behaviors arising from various intrusions. These explanations were later validated by information used by domain experts to detect anomalies. Other advantages of RX-ADS include: 1) the method can be trained on unlabeled data; 2) explanations help experts in understanding anomalies and root course analysis, and also help with AI model debugging and diagnostics, ultimately improving user trust in AI systems.
- 24 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 24 (12) , 14051-14063
RX-ADS: Interpretable Anomaly Detection Using Adversarial ML for Electric Vehicle CAN Data
Recent year has brought considerable advancements in Electric Vehicles (EVs) and associated infrastructures/communications. Intrusion Detection Systems (IDS) are widely deployed for anomaly detection in such critical infrastructures. This paper presents an Interpretable Anomaly Detection System (RX-ADS) for intrusion detection in CAN protocol communication in EVs. Contributions include: 1) Feature Extractor; 2) Anomaly Detection System; and 3) Explanation Generator for detected anomalies. The presented approach was tested on two benchmark CAN datasets: OTIDS and Car Hacking. The anomaly detection performance of RX-ADS was compared against the state-of-the-art approaches on these datasets: HIDS and GIDS. The RX-ADS approach showed comparable performance to the HIDS approach on OTIDS dataset and outperformed HIDS and GIDS approaches on Car Hacking dataset. Further, the proposed approach was able to generate explanations for detected abnormal behaviors arising from various intrusions. These explanations were later validated by information used by domain experts to detect anomalies. Other advantages of RX-ADS include: 1) the method can be trained on unlabeled data; 2) explanations help experts in understanding anomalies and root course analysis, and also help with AI model debugging and diagnostics, ultimately improving user trust in AI systems.
- Open Access
- 14 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 59788-59803
A Review of Visualization Methods for Cyber-Physical Security: Smart Grid Case Study
Cyber-Physical Systems (CPSs) are becoming increasingly complex and interconnected as they attempt to meet the demands of evolving society. As a result, monitoring and maintaining them becomes a more complex and demanding task for control system operators and cyber defenders. While the literature on visualization techniques in the context of cybersecurity is extensive, the same cannot be said for studies on visualization for the security of cyber-physical systems. This paper aims to fill that gap by: 1) defining the main features of a visualizations workflow for security visualizations in cyber-physical systems. The workflow includes the acquisition of cyber and physical data, processing of data, selection, and configuration of both visualization tools and end-user interactions. 2) Providing an overview of cyber-physical security visualization systems, with a focus on smart grids as a case study. Finally, we use the perspectives gained from this analysis to provide insights and directions for future research and design of cyber-physical visualization techniques.
- 14 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 59788-59803
Open AccessA Review of Visualization Methods for Cyber-Physical Security: Smart Grid Case Study
Cyber-Physical Systems (CPSs) are becoming increasingly complex and interconnected as they attempt to meet the demands of evolving society. As a result, monitoring and maintaining them becomes a more complex and demanding task for control system operators and cyber defenders. While the literature on visualization techniques in the context of cybersecurity is extensive, the same cannot be said for studies on visualization for the security of cyber-physical systems. This paper aims to fill that gap by: 1) defining the main features of a visualizations workflow for security visualizations in cyber-physical systems. The workflow includes the acquisition of cyber and physical data, processing of data, selection, and configuration of both visualization tools and end-user interactions. 2) Providing an overview of cyber-physical security visualization systems, with a focus on smart grids as a case study. Finally, we use the perspectives gained from this analysis to provide insights and directions for future research and design of cyber-physical visualization techniques.