Yakui Weng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yakui Weng has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
Xin Huang
4 shared publicationsZhihong Yang
School of Science, Nanjing University of Posts and Telecommunications 1 , Nanjing 210023
4 shared publicationsFengyu Miao
3 shared publicationsJie Li
3 shared publications- Shuai Dong
Southeast University
3 shared publications - Yongsen Tang
Nanjing University of Posts and Telecommunications
3 shared publications
Latest Publications
- 15 September 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (11)
Strain control of magnetism and magnon thermal conductivity in SeCoO3
Strain-modulated magnetic phase transition is an attractive phenomenon in condensed-matter physics and materials science. Using density functional theory and spin wave theory, we investigate the effect of strain on the magnetic ordering and low-energy magnetic excitation in perovskite SeCoO3. Under biaxial strain and a-axis uniaxial strain, the system undergoes a phase transition from the original G-type antiferromagnetic to C-type antiferromagnetic order due to a significant reduction in the out-of-plane bond angles. Simultaneously, marked changes also occur in both the spectral weight distribution of low-energy spin wave modes and the in-plane longitudinal thermal conductivity. Although uniaxial strain along b-axis does not induce a magnetic phase transition, the in-plane thermal conductivity is nonetheless enhanced under tensile strain.
- 15 September 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (11)
Strain control of magnetism and magnon thermal conductivity in SeCoO3
Strain-modulated magnetic phase transition is an attractive phenomenon in condensed-matter physics and materials science. Using density functional theory and spin wave theory, we investigate the effect of strain on the magnetic ordering and low-energy magnetic excitation in perovskite SeCoO3. Under biaxial strain and a-axis uniaxial strain, the system undergoes a phase transition from the original G-type antiferromagnetic to C-type antiferromagnetic order due to a significant reduction in the out-of-plane bond angles. Simultaneously, marked changes also occur in both the spectral weight distribution of low-energy spin wave modes and the in-plane longitudinal thermal conductivity. Although uniaxial strain along b-axis does not induce a magnetic phase transition, the in-plane thermal conductivity is nonetheless enhanced under tensile strain.
- 15 April 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 111 (13)
Schottky anomaly and magnetoelectric effect in polar magnet without long-ranged magnetic ordering- 15 April 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 111 (13)
Schottky anomaly and magnetoelectric effect in polar magnet without long-ranged magnetic ordering- 16 December 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (25)
Electric polarization induced by low magnetic field in the W-type hexaferrite BaCoFe17O27 single crystal
Recently, the noncollinear magnetic structure with varying Co/Zn ratios was reported in the W-type hexaferrites using neutron powder diffraction. It is believed that these noncollinear spin orderings may stimulate magnetoelectric (ME) effect in the W-type hexaferrite. Herein, we present distinct evidence of ME response through systematic investigation on the magnetic and ferroelectric properties in BaCoFe17O27. Magnetization exhibits two different anomalies at TC1 ∼ 350 K and TC2 ∼ 150 K, indicating the formation of long-range longitudinal spin configurations and the spin reorientation transition, respectively. We have found that the low field-driven electric polarization has been observed under the ME poling condition of E ⊥ (H ⊥ c, and c). Spin current mechanism is mainly considered as the physics origin in its ME response, corresponding to the other hexaferrites as reported early. In addition, the weak electric polarization observed with E(⊥c)//H(⊥c) suggests that the p–d hybridization mechanism should also be contributed to the ME response in this compound. Therefore, BaCoFe17O27 presents an intrinsic magnetoelectric effect and provides a thought for people to seek and study the more single-phase ME compounds from the viewpoint of foundational and applications.
- 16 December 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (25)
Electric polarization induced by low magnetic field in the W-type hexaferrite BaCoFe17O27 single crystal
Recently, the noncollinear magnetic structure with varying Co/Zn ratios was reported in the W-type hexaferrites using neutron powder diffraction. It is believed that these noncollinear spin orderings may stimulate magnetoelectric (ME) effect in the W-type hexaferrite. Herein, we present distinct evidence of ME response through systematic investigation on the magnetic and ferroelectric properties in BaCoFe17O27. Magnetization exhibits two different anomalies at TC1 ∼ 350 K and TC2 ∼ 150 K, indicating the formation of long-range longitudinal spin configurations and the spin reorientation transition, respectively. We have found that the low field-driven electric polarization has been observed under the ME poling condition of E ⊥ (H ⊥ c, and c). Spin current mechanism is mainly considered as the physics origin in its ME response, corresponding to the other hexaferrites as reported early. In addition, the weak electric polarization observed with E(⊥c)//H(⊥c) suggests that the p–d hybridization mechanism should also be contributed to the ME response in this compound. Therefore, BaCoFe17O27 presents an intrinsic magnetoelectric effect and provides a thought for people to seek and study the more single-phase ME compounds from the viewpoint of foundational and applications.
- 6 August 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 82, 994-1000
Lithium-modified B3C2P3 monolayer as a promising medium for reversible hydrogen storage
- 6 August 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 82, 994-1000
Lithium-modified B3C2P3 monolayer as a promising medium for reversible hydrogen storage
- 18 July 2024
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 8 (7) , 075401
Ultrahigh-capacity reversible hydrogen storage in BN-biphenylene under environmental conditions
Although the use of two-dimensional materials for hydrogen storage has been intensively studied, finding reversible hydrogen storage material with high hydrogen gravimetric density under environmental conditions remains challenging. In this study, a new two-dimensional BN-biphenylene with Li decoration is systematically investigated through density functional theory (DFT) and grand canonical Monte Carlo (GCMC) simulations. The DFT results reveal that the average binding energy between Li and BN-biphenylene monolayers can be significantly improved from −0.9 eV to −3.34 eV by doping two C atoms at N sites. In this sense, each Li atom can adsorb three molecules, yielding a high weight density of 12.54 wt%. Meanwhile, considering the corresponding desorption temperature at the ideal environmental condition of 323.89 K, Li-modified C-doped BN-biphenylene monolayer can be treated as a promising reversible candidate for high-density hydrogen storage. In addition, GCMC simulation results also prove that the storage capacity of Li-modified C-doped BN-biphenylene can reach an ultrahigh 13.28 wt% under 298 K and 1 bar. The present study provides a positive and valuable reference for exploring ultrahigh-capacity reversible hydrogen storage materials under environmental conditions.- 18 July 2024
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 8 (7) , 075401
Ultrahigh-capacity reversible hydrogen storage in BN-biphenylene under environmental conditions
Although the use of two-dimensional materials for hydrogen storage has been intensively studied, finding reversible hydrogen storage material with high hydrogen gravimetric density under environmental conditions remains challenging. In this study, a new two-dimensional BN-biphenylene with Li decoration is systematically investigated through density functional theory (DFT) and grand canonical Monte Carlo (GCMC) simulations. The DFT results reveal that the average binding energy between Li and BN-biphenylene monolayers can be significantly improved from −0.9 eV to −3.34 eV by doping two C atoms at N sites. In this sense, each Li atom can adsorb three molecules, yielding a high weight density of 12.54 wt%. Meanwhile, considering the corresponding desorption temperature at the ideal environmental condition of 323.89 K, Li-modified C-doped BN-biphenylene monolayer can be treated as a promising reversible candidate for high-density hydrogen storage. In addition, GCMC simulation results also prove that the storage capacity of Li-modified C-doped BN-biphenylene can reach an ultrahigh 13.28 wt% under 298 K and 1 bar. The present study provides a positive and valuable reference for exploring ultrahigh-capacity reversible hydrogen storage materials under environmental conditions.- Open Access
- 1 January 2024
- Published by Wiley in International Journal of Energy Research
- Vol. 2024 (1)
Sodium‐Decorated SiB Monolayer for Reversible Hydrogen Storage: High‐Capacity Achieved by Carbon Doping
Based on the first‐principles calculation and grand canonical Monte Carlo (GCMC) simulation, the reversible hydrogen storage of Na‐decorated silicon boron (SiB) and C‐doped SiB monolayers have been investigated. For double side 4Na‐decorated SiB monolayer, each Na atom can adsorb five H2 molecules with the average adsorption energy of −0.18 eV/H2, yielding an H2 gravimetric density of 9.09 wt% and desorption temperature TD of 227 K. To further improve the H2 gravimetric density and desorption temperature, doping effect was employed to enhance the internal electric field between Na atom and SiB substrate. When two Si atoms in the SiB monolayer were replaced by C atoms, the adsorption energy for H2 was significantly improved. The H2 gravimetric density reaches to 10.63 wt% with the average adsorption energy of −0.22 eV/H2. Meanwhile, the desorption temperature TD was raised from 227 to 282 K, reaching the ideal condition near room temperature. In addition, the GCMC simulations further confirm that the H2 gravimetric density can fully meet the latest hydrogen storage target (5.5 wt%) for both Na‐decorated SiB monolayer and Na‐decorated C‐doped SiB monolayer. Our results indicate that both Na‐modified SiB and C‐doped SiB monolayers can be used as promising materials for reversible hydrogen storage.
- 1 January 2024
- Published by Wiley in International Journal of Energy Research
- Vol. 2024 (1)
Open AccessSodium‐Decorated SiB Monolayer for Reversible Hydrogen Storage: High‐Capacity Achieved by Carbon Doping
Based on the first‐principles calculation and grand canonical Monte Carlo (GCMC) simulation, the reversible hydrogen storage of Na‐decorated silicon boron (SiB) and C‐doped SiB monolayers have been investigated. For double side 4Na‐decorated SiB monolayer, each Na atom can adsorb five H2 molecules with the average adsorption energy of −0.18 eV/H2, yielding an H2 gravimetric density of 9.09 wt% and desorption temperature TD of 227 K. To further improve the H2 gravimetric density and desorption temperature, doping effect was employed to enhance the internal electric field between Na atom and SiB substrate. When two Si atoms in the SiB monolayer were replaced by C atoms, the adsorption energy for H2 was significantly improved. The H2 gravimetric density reaches to 10.63 wt% with the average adsorption energy of −0.22 eV/H2. Meanwhile, the desorption temperature TD was raised from 227 to 282 K, reaching the ideal condition near room temperature. In addition, the GCMC simulations further confirm that the H2 gravimetric density can fully meet the latest hydrogen storage target (5.5 wt%) for both Na‐decorated SiB monolayer and Na‐decorated C‐doped SiB monolayer. Our results indicate that both Na‐modified SiB and C‐doped SiB monolayers can be used as promising materials for reversible hydrogen storage.
- Open Access
- 15 June 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (23)
Electron doping of SmNiO3 via interfacial charge transfer: A first-principles study
SmNiO3 is a representative quantum material exhibiting the antidoping behavior, where the conductivity of the material is reduced rather than increased by electron doping. Recent experimental and theoretical works have demonstrated a phase transition of SmNiO3 with large conductance changes via chemical methods. However, the effect of electron doping via interfacial charge transfer in SmNiO3 is much less studied. In this work, the first-principles density functional theory (DFT)+U method is employed to investigate the SmNiO3/YTiO3 superlattice, in which the YTiO3 layer acts as the electron donor. Compared with the chemical doping in SmNiO3, several interesting physical phenomena have been predicted in SmNiO3/YTiO3 superlattices due to the lattice and electronic reconstructions. First, at a doping concentration of 1e− per Ni, i.e., (SmNiO3)1/(YTiO3)1 superlattice, all Ni3+ are converted to Ni2+, resulting in a Mott-insulating phase, similar to the chemical doping in the pristine material. Interestingly, such a Mott gap can be efficiently modulated by tuning the stacking orientation. Second, at a doping concentration of 12e− per Ni, i.e., [001]-orientated (SmNiO3)2/(YTiO3)1 superlattice, the electronic structure associated with charge ordering depends on the concrete magnetic order, giving rise to magnetism-dependent electronic behavior. In addition, as the doping concentration further decreases (i.e., a doping concentration of 13e−/Ni), a metallic state is predicted in a [001]-orientated (SmNiO3)3/(YTiO3)1 superlattice, which is quite different from the case of chemical doping.
- 15 June 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (23)
Open AccessElectron doping of SmNiO3 via interfacial charge transfer: A first-principles study
SmNiO3 is a representative quantum material exhibiting the antidoping behavior, where the conductivity of the material is reduced rather than increased by electron doping. Recent experimental and theoretical works have demonstrated a phase transition of SmNiO3 with large conductance changes via chemical methods. However, the effect of electron doping via interfacial charge transfer in SmNiO3 is much less studied. In this work, the first-principles density functional theory (DFT)+U method is employed to investigate the SmNiO3/YTiO3 superlattice, in which the YTiO3 layer acts as the electron donor. Compared with the chemical doping in SmNiO3, several interesting physical phenomena have been predicted in SmNiO3/YTiO3 superlattices due to the lattice and electronic reconstructions. First, at a doping concentration of 1e− per Ni, i.e., (SmNiO3)1/(YTiO3)1 superlattice, all Ni3+ are converted to Ni2+, resulting in a Mott-insulating phase, similar to the chemical doping in the pristine material. Interestingly, such a Mott gap can be efficiently modulated by tuning the stacking orientation. Second, at a doping concentration of 12e− per Ni, i.e., [001]-orientated (SmNiO3)2/(YTiO3)1 superlattice, the electronic structure associated with charge ordering depends on the concrete magnetic order, giving rise to magnetism-dependent electronic behavior. In addition, as the doping concentration further decreases (i.e., a doping concentration of 13e−/Ni), a metallic state is predicted in a [001]-orientated (SmNiO3)3/(YTiO3)1 superlattice, which is quite different from the case of chemical doping.
- 14 December 2022
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 35 (5) , 055601
Effect of Mn doping and charge transfer on LaTi1−x Mn x O3
We report the magnetic and electronic transport properties of Mn-doped LaTi1−x Mn x O3 (x= 0, 0.1, 0.3, 0.5) as a function of temperature and an applied magnetic field. It was found that the Mn-doped samples show a magnetic transition which is not present in the parent LaTiO3. The Mn-doped samples showed fluctuations in magnetization at low fields below their Néel transition temperature indicating electronic phase separation in the material. Increased Mn content in the sample strengthens the ferromagnetic-like moment while maintaining G-type antiferromagnetic phase by charge transfer from Mn to Ti and influencing orbital ordering of the Ti3+ t2g orbitals. The results are discussed in parallel with transport and bulk magnetization measurements detailing the electronic behavior. An additional context for the mechanism is supported by first-principles density-function theory calculations.
- 14 December 2022
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 35 (5) , 055601
Effect of Mn doping and charge transfer on LaTi1−x Mn x O3
We report the magnetic and electronic transport properties of Mn-doped LaTi1−x Mn x O3 (x= 0, 0.1, 0.3, 0.5) as a function of temperature and an applied magnetic field. It was found that the Mn-doped samples show a magnetic transition which is not present in the parent LaTiO3. The Mn-doped samples showed fluctuations in magnetization at low fields below their Néel transition temperature indicating electronic phase separation in the material. Increased Mn content in the sample strengthens the ferromagnetic-like moment while maintaining G-type antiferromagnetic phase by charge transfer from Mn to Ti and influencing orbital ordering of the Ti3+ t2g orbitals. The results are discussed in parallel with transport and bulk magnetization measurements detailing the electronic behavior. An additional context for the mechanism is supported by first-principles density-function theory calculations.
- 29 October 2021
- Published by American Physical Society (APS) in Physical Review B
- Vol. 104 (16) , 165150
Manipulation of states by tuning the tetragonal distortionThe spin-orbit entangled quantum states in compounds, e.g., the and states, have attracted great interests for their unique physical roles in unconventional superconductivity and topological states. Here, the key role of tetragonal distortion is clarified, which determines the ground states of systems to be the one (e.g., ) or the one (e.g., ). By tuning the tetragonal distortion via epitaxial strain, the occupation weights of orbitals can be subtly modulated, competing with the spin-orbit coupling. Consequently, quantum phase transitions between the state and the state, as well as between different states, can be achieved, resulting in significant changes of local magnetic moments. Our prediction points out a reliable route to engineer new functionality of states in these quantum materials.- 29 October 2021
- Published by American Physical Society (APS) in Physical Review B
- Vol. 104 (16) , 165150
Manipulation of states by tuning the tetragonal distortionThe spin-orbit entangled quantum states in compounds, e.g., the and states, have attracted great interests for their unique physical roles in unconventional superconductivity and topological states. Here, the key role of tetragonal distortion is clarified, which determines the ground states of systems to be the one (e.g., ) or the one (e.g., ). By tuning the tetragonal distortion via epitaxial strain, the occupation weights of orbitals can be subtly modulated, competing with the spin-orbit coupling. Consequently, quantum phase transitions between the state and the state, as well as between different states, can be achieved, resulting in significant changes of local magnetic moments. Our prediction points out a reliable route to engineer new functionality of states in these quantum materials.- 1 October 2021
- Published by IOP Publishing in Europhysics Letters
- Vol. 136 (2) , 27005
Magnetic order and electronic structure of [110]-oriented LaTiO3 films: A theoretical study
The epitaxial strain effects on the magnetic ground state and electronic structure of [110]-oriented LaTiO3 films have been calculated using the density functional theory. First, the lattice constants of the a-axis and c-axis are fixed to study. For the compressive strain, a magnetic phase transition from the original G-type antiferromagnet to A-type antiferromagnet is predicted when using the SrTiO3, LaGaO3, and LaAlO3 substrates, similar to the [001] case. Interestingly, a new magnetic phase, i.e., the ferromagnetic order, will appear when the larger compressive LaSrAlO4 is used. For the tensile strain, although the G-type antiferromagnetic order is robust as the ground state, the exchange couplings are significantly increased, which will enhance the Néel temperature. Furthermore, the contributions of d yz , d xz and d xy orbitals to the bands near the Fermi level show an obvious difference due to the Jahn-Teller distortions. For comparison, the case with fixed b-axis and c-axis is also tested, which shows that the compressive strained LaTiO3 remains the G-type antiferromagnetic order while the tensile strained LaTiO3 exhibits the A-type antiferromagnetic order. The underlying physical mechanisms are the lattice distortions, including the Ti-O-Ti bond angles and Ti-O bond lengths.
- 1 October 2021
- Published by IOP Publishing in Europhysics Letters
- Vol. 136 (2) , 27005
Magnetic order and electronic structure of [110]-oriented LaTiO3 films: A theoretical study
The epitaxial strain effects on the magnetic ground state and electronic structure of [110]-oriented LaTiO3 films have been calculated using the density functional theory. First, the lattice constants of the a-axis and c-axis are fixed to study. For the compressive strain, a magnetic phase transition from the original G-type antiferromagnet to A-type antiferromagnet is predicted when using the SrTiO3, LaGaO3, and LaAlO3 substrates, similar to the [001] case. Interestingly, a new magnetic phase, i.e., the ferromagnetic order, will appear when the larger compressive LaSrAlO4 is used. For the tensile strain, although the G-type antiferromagnetic order is robust as the ground state, the exchange couplings are significantly increased, which will enhance the Néel temperature. Furthermore, the contributions of d yz , d xz and d xy orbitals to the bands near the Fermi level show an obvious difference due to the Jahn-Teller distortions. For comparison, the case with fixed b-axis and c-axis is also tested, which shows that the compressive strained LaTiO3 remains the G-type antiferromagnetic order while the tensile strained LaTiO3 exhibits the A-type antiferromagnetic order. The underlying physical mechanisms are the lattice distortions, including the Ti-O-Ti bond angles and Ti-O bond lengths.