CQCe Qin

Ce Qin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ce Qin has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Efficient and scalable finite-element magnetotelluric modelling on high-order meshes

    by Ce Qin, Alexander Grayver

    SUMMARY: 3-D Forward modelling of magnetotelluric (MT) data remains a computationally challenging task, particularly when accurate broad-band MT responses are simulated for real-world problems that often involve complex multiscale bathymetry and/or topography. To overcome this challenge, we developed a new efficient numerical approach for 3-D MT forward modelling that combines high-order Nédélec-type finite elements and high-order meshes, allowing us to obtain superior accuracy and account for complex material boundaries and interfaces. Despite gains in accuracy, higher order FE solvers are often considered impractical owing to higher memory consumption and a more ill-conditioned system. To overcome these limitations, we use an iterative solver accelerated by the Low-Order-Refined (LOR) pre-conditioner, which uses spectrally equivalent low-order operators, rendering the complexity independent of the polynomial degree. Another key novelty is a matrix-free implementation, where the action of the high-order operator is computed efficiently without explicit matrix assembly. The low-order system is solved using an Auxiliary Space Maxwell (AMS) solver based on a multigrid solver. We demonstrate the efficiency in a series of numerical experiments. Scalability analysis on a 3-D benchmark model demonstrates that the LOR pre-conditioner significantly outperforms the current state-of-the-art AMS pre-conditioner in terms of CPU time and memory usage, especially for higher polynomial degrees. Excellent scalability is confirmed by solving a problem with up to $1.5\times 10^9$ degrees of freedom in less than 2 min using 16 384 CPU cores, which is, to our knowledge, the largest 3-D MT problem reported to date. We also illustrate that high-order hexahedral meshes allow for accurate discretization of complex geometries, such as topography, with substantially fewer elements than conventional linear meshes. Finally, the capability of the integrated approach is demonstrated on a real 3-D model crossing the ocean trench in the Aleutian subduction zone. The proposed methods pave the way for more efficient and accurate 3-D MT modelling that is crucial for the inversion of complex MT data sets.


  • Open Access

    Non-conforming adaptive mesh refinement for 3-D controlled-source electromagnetic modelling using high-order finite elements

    by Ning Zhao, Lei Wang, Songning Shen, Ce Qin, Xiaoli Mi

    SUMMARY: Efficient simulation of controlled-source electromagnetic methods in complex geological settings is critical for accurate subsurface imaging and resource evaluation. This study presents an advanced adaptive finite element algorithm leveraging non-conforming arbitrary hexahedral meshes and combining the flexibility of adaptive refinement with the accuracy of high-order basis functions to solve challenges in electromagnetic field modelling. We present a high-order finite element algorithm for electromagnetic geophysics that supports adaptive refinement on arbitrary hexahedral meshes, a capability not commonly available in existing implementations. The proposed algorithm resolves sign conflict issues inherent in non-conforming meshes by employing global vertex indices and adjusting constraint matrices, ensuring the tangential continuity of the electromagnetic field across the computational domain. Adaptive refinement is guided by goal-oriented error estimation, enabling precise solving for the electromagnetic response while maintaining computational efficiency. Numerical examples validate the algorithm’s accuracy and performance. In a steel-cased well model, the computational accuracy of our algorithm is verified by comparison with the 3-D cylindrically symmetric algorithm of the open-source software SimPEG. Furthermore, it is demonstrated that arbitrary hexahedral meshes can achieve accurate modelling of the steel casing with a reduced mesh count. The application to the Vallès Basin model demonstrates substantial computational savings using arbitrary hexahedral meshes compared to tetrahedral meshes. Finally, the algorithm successfully models a large-scale oil-gas reservoir, illustrating its robustness in addressing complex geological scenarios and its potential for monitoring dynamic processes such as water intrusion during resource extraction. These results establish the proposed method as a reliable and efficient forward modelling tool for controlled-source electromagnetic applications, providing significant improvement in flexibility, accuracy and computational efficiency.


  • A high-order multiscale finite-element method for 3D direct current resistivity log modeling

    by Ning Zhao, Long Zhang, Ce Qin, Yunjian Yang, Junjie Jiang

    When solving the 3D direct current resistivity logging problem with complex heterogeneous structures, the finite-element method requires the construction of a fine discretized mesh to accurately reflect the significant heterogeneity of the steel casing and the complexity of the underground structure. This fine mesh division will require a large amount of computing resources, making it difficult to solve in practice. The multiscale finite-element method can significantly reduce the size of the coefficient matrix, which greatly decreases the computational cost. However, the low-order multiscale finite-element method cannot accurately transfer the heterogeneous information of the fine mesh to the coarse mesh, which leads to numerical errors. In addition, imposing linear boundary conditions to construct multiscale basis functions may introduce resonance error. Consequently, we implement a 3D direct current resistivity logging forward algorithm based on high-order multiscale finite elements. On the one hand, we construct boundary and internal high-order multiscale basis functions by using arbitrary-order orthogonal polynomials within local cells and then linearly combine them to form complete high-order multiscale basis functions, ensuring the numerical solution’s approximation ability and convergence accuracy. On the other hand, we construct temporary high-order multiscale basis functions on extended local cells, combined with an oversampling strategy to mitigate the error problem caused by boundary resonance effects. We simulate three different electrode configurations: pole-pole, pole-dipole, and dipole-dipole. The results indicate that our new method can approximate the fine-scale reference solution on the coarse mesh with high accuracy and significantly reduced computational time when solving the linear system.


  • An hp -adaptive finite-element approach for 3D controlled-source electromagnetic forward modeling

    by Ce Qin, Ning Zhao, Xuben Wang, Hui Li

    Accurate and efficient 3D controlled-source electromagnetic (CSEM) forward modeling is crucial for deciphering CSEM responses in complex geologic contexts and assessing the efficacy of survey designs. It also serves as the foundation for 3D inversion, a critical technique for interpreting CSEM data. We present a novel hp-adaptive finite-element method for 3D CSEM forward modeling. This method enhances the traditional h-adaptive approach, which only refines the mesh while keeping the polynomial degree of the basis functions constant, by enabling simultaneous refining of the mesh and increasing the polynomial degree of the basis functions. High-order elements yield superior approximations when the solution exhibits sufficient smoothness, whereas mesh refinement enhances accuracy in regions with less smooth solutions. The adaptive refinement process is guided by a goal-oriented error estimator that relies on the residual of the governing equation and the continuity of electromagnetic fields. The hp-adaptive strategy, which determines whether to refine elements or increase their polynomial degree, is based on the refinement levels of the elements. Constraints are applied to hanging nodes, introduced during the refinement process, to ensure the continuity of the finite-element space. We validate the accuracy, efficiency, and convergence of the hp-adaptive method through tests on two layered models. Further simulations on a topographic model and a realistic model corroborate its effectiveness. Our findings indicate that the hp-adaptive method outperforms the traditional h-adaptive method in terms of accuracy, convergence rate, and computational cost, making it a promising technique for 3D CSEM forward modeling.


  • 3-D Joint Inversion of MT and CSEM Data Based on Adaptive Finite-Element Forward Modeling

    by Ce Qin, Weiyuan He, Xuben Wang, Ning Zhao

    Electromagnetic (EM) methods are widely used in geophysical exploration. Different EM methods offer varying detection depths and resolutions. Magnetotelluric (MT) typically provides information about deep structures, whereas controlled-source EM (CSEM) is more effective in imaging shallow targets. To enhance the resolution of subsurface structures, a joint inversion of MT and CSEM data is proposed. In this paper, we combine MT and CSEM data and perform joint inversion using the Limited-memory Broyden-Fletcher-Goldfarb-Shanno (L-BFGS) algorithm. To balance the two data types, we propose a data weighting scheme based on the square root of the ratio of the number of data points. To improve the accuracy of forward responses and the reliability of the inversion, we use a high-order adaptive finite element forward modeling method. The forward modeling mesh and inversion mesh are decoupled to prevent the over-parameterization of the inversion mesh. Additionally, this approach uses an algorithm based on posteriori error estimators to guide the adaptive refinement process of the forward modeling mesh. The accuracy and efficiency of the forward modeling method are verified using a layered model. The inversion results of two complex models demonstrate that the joint inversion method offers superior resolution compared to standalone inversions.


  • High-order finite-element forward-modeling algorithm for the 3D borehole-to-surface electromagnetic method using octree meshes

    by Ce Qin, Haonan Li, Hui Li, Ning Zhao

    The borehole-to-surface electromagnetic (BSEM) method complements surface and airborne electromagnetic (EM) methods. The borehole is typically filled with conductive media, which significantly impacts the responses. To accurately simulate the responses, the borehole needs to be modeled. However, the size of the borehole is very small compared with the entire computational domain, making it challenging to discretize the borehole accurately. We develop a high-accuracy 3D finite-element forward-modeling algorithm for the BSEM method using octree meshes. The basic idea of octree meshes is to locally refine the mesh by dividing the hexahedral element into eight smaller elements. This approach has the advantage of being able to accurately discretize small geometric features while using coarse meshes in other areas, thus reducing the computational cost. In addition, high-order basis functions are used to improve the accuracy of numerical solutions. We develop a 3D forward-modeling code for BSEM using the C++ programming language. We verify the correctness and accuracy of our implementation by comparing the numerical responses with analytical solutions. Furthermore, we determine the influence of the borehole on the EM responses, showing that the borehole will cause a decrease of several orders of magnitude in the responses when the borehole is filled with highly conductive media. We also use two 3D models to demonstrate the efficacy of octree meshes in the discretization of complex structures and to discuss the effectiveness and sensitivity of BSEM data in the exploration of mineral and oil-gas resources. The code is open source under the Massachusetts Institute of Technology license and can be used as an accurate modeling tool for BSEM responses, providing useful guidance for field exploration. The code is designed with a modular architecture, ensuring ease of maintenance and the ability to extend to other EM methods and serve as the foundation for 3D inversion.


  • Physics-Driven Deep Learning Pixel-Based Inversion of Logging While Drilling in Anisotropic Formation

    by Ning Zhao, Ning Li, Zhanshan Xiao, Xuben Wang, Ce Qin

    The inversion of logging-while-drilling (LWD) measurements using deep learning (data-driven approach) is a rapidly growing topic of interest in well geosteering. Deep learning (DL) inversion constructs a complex nonlinear mapping from data to model and has extremely high inversion efficiency. A purely data-driven approach requires large amounts of representative training samples from both the model and data spaces to build robust networks, which may not conform to the physical constraints of the problem. The lack of physical knowledge can limit the effectiveness of DL networks when applied to new scenarios. The regularization inversion (physics-driven approach) is a very efficient local optimization technique but is prone to be trapped into local minima, and the inversion results cannot be obtained in real-time. We propose a coupled physics-driven and data-driven approach to address this issue and construct a DL workflow. A 2.5D model including dip, fault, and anisotropic formation is considered to evaluate the proposed method. Comparing the inversion imaging performance of the proposed physics-driven approach with the traditional residual network (ResNet) shows a significant improvement in the accuracy of the reconstructed resistivity model. Finally, the robustness is evaluated by adding a noise generalization network.


  • High-Accuracy 3-D TEM Forward Modeling Using Adaptive Finite Element Method

    by Ce Qin, Xingfei Liu, Zhanshan Xiao, Xuben Wang, Ning Zhao

    The accurate and efficient forward modeling of the transient electromagnetic (TEM) method requires proper mesh generation, which influences both calculation speed and response accuracy. This paper presents a three-dimensional (3D) TEM forward modeling method that achieves high accuracy by using a frequency-domain to time-domain transformation strategy and adaptive mesh refinements in the frequency-domain. Specifically, an interpolation-based Fourier transform method is employed to reduce the number of computed frequencies in the frequency-domain, resulting in significant efficiency improvement without compromising accuracy. Furthermore, the method incorporates unstructured tetrahedral meshes and an adaptive finite element algorithm based on posterior error estimators to enhance the accuracy of the frequency-domain response calculation. The proposed method is applied to the widely used long-offset TEM (LOTEM) system. The accuracy of the method is verified by comparing the simulated response of a layered model with the analytical solution. Additionally, the effectiveness of the algorithm is tested using three 3D models. Cross-validation results with other popular open-source codes demonstrate that the proposed method can achieve high accuracy and efficiency for both simple and complex models.