Chen Zhang

Level-4+ autonomous driving systems (ADS) must run dozens of heterogeneous deep neural networks (DNNs) as end-toend (E2E) pipelines under a strict latency constraint (≤100 ms), even as execution time varies by up to 3.3×. Cost rules out dedicating isolated hardware to each function in mass-produced ADS, so these DNNs must be densely colocated on a single chip, which introduces shared-resource contention. Tile-based accelerators expose two scheduling opportunities that conventional ADS schedulers do not exploit. First, they provide a tunable degree of parallelism (DoP): assigning more tiles raises DoP and can shorten DNN execution time. Second, they provide hardwarenative isolation: tiles can be physically partitioned among colocated DNNs. But using this flexibility is expensive: changing a task’s DoP triggers a stop-migrate-restart reallocation of its weights and intermediate features. At ADS task rates of 10–240 Hz, these stalls accumulate along E2E chains and threaten deadlines. Reservation-based schedulers fix DoP and leave this flexibility unused; work-conserving schedulers exploit it but assume reallocation is cheap and treat deadlines as independent. We present ADS-Tile, an isolation-aware scheduling framework that targets the reallocation cost of spatial DoP changes. ADS-Tile combines configurable isolation and elastic reservation into a spatio-temporal isolation-sharing space that bounds where and when reallocation occurs; a probabilistic latency model and a DAG-aware runtime scheduler then use this space to decide task colocation and DoP under shared E2E deadlines. On an industry- and academiaderived ADS benchmark, ADS-Tile uses up to 32% fewer tiles than the work-conserving baseline in deadline-critical settings and cuts reallocation-induced wasted processing capacity from 17%–44% to below 1.2%. Controlled spatio-temporal sharing improves resource efficiency and latency predictability for tile-based ADS.

Multichiplet deep neural network (DNN) accelerators have evolved as promising modular solutions, offering enhanced performance, scalability, and cost-effectiveness. These architectures, however, suffer from the escalating communication bottleneck with increasing scale, primarily stemming from rising hop count and worsening link underutilization. The bottleneck is exacerbated by conventional fixed interconnection networks’ nonadaptability to diverse DNN dataflows. Moreover, an efficient routing tailored for large-scale networks with deadlock-freedom is needed for performance. To address these scalability challenges, leveraging the low-latency links and abundant interconnection resources with reconfigurability in the active interposer, we propose HiRe, a hierarchical reconfigurable network-routing co-design architecture for large-scale multichiplet DNN accelerators. The architecture introduces reconfigurable nodes (RNs) across on-chip and interchiplet hierarchical networks, enabling dynamic bypassing and network reconfiguration. Based on the network, it incorporates an efficient deadlock-free routing that combines simulated annealing (SA)-based communication scheduling with greedy path selection. Through the network-routing co-design, HiRe reduces the hop count and enhances the link utilization. The HiRe architecture is implemented and synthesized in a 55-nm CMOS process. Experimental results demonstrate that HiRe achieves a 14.3%–45.2% EDP reduction and a 14.1%–35.0% latency reduction compared to state-of-the-art (SOTA) innovations, effectively mitigating the large-scale communication bottleneck.

The deployment of Large Language Models (LLMs) for real-time intelligence on edge devices is rapidly growing. However, conventional hardware architectures face a fundamental memory wall challenge, where limited on-device memory capacity and bandwidth severely constrain the size of deployable models and their inference speed, while also limiting on-device adaptation. To address this challenge, we propose TOM, a hybrid ROM-SRAM accelerator co-designed with ternary quantization, which balances extreme density with on-device tunability. TOM exploits the synergy between ternary quantization and ROM to achieve extreme memory density and bandwidth, while preserving flexibility through a hybrid ROM-SRAM architecture designed for QLoRA-based tunability. Specifically, we introduce: (1) a sparsity-aware ROM architecture that synthesizes ternary weights as standard-cell logic, eliminating area overhead from zero-valued bits; (2) a distributed processing architecture that co-locates high-density ROM banks with flexible SRAM-based QLoRA adapters and compute units; and (3) a workload-aware dynamic power gating scheme that exploits the logic-based nature of ROM to power down inactive banks, minimizing dynamic energy consumption. TOM achieves an inference throughput of 3,306 TPS using BitNet-2B model, demonstrating its effectiveness in delivering real-time, energy-efficient edge intelligence.

The scaling of computation throughput continues to outpace improvements in memory bandwidth, making many deep learning workloads memory-bound. Kernel fusion is a key technique to alleviate this problem, but the fusion strategies of existing compilers and frameworks are limited to using local scratchpad memory. When the intermediate results exceed the limited capacity (such as FFN), the fusion fails. Although modern GPUs (like the NVIDIA H100) now incorporate an inter-core connection mechanism known as Distributed Shared Memory(DSM)--providing a larger, high-bandwidth, and low-latency on-chip memory pool--this hardware potential has yet to be exploited by software frameworks. To bridge this gap, we present FlashFuser, the first compiler framework to utilize inter-core connection for kernel fusion on modern GPUs. FlashFuser extends established fusion techniques to the DSM domain through three core contributions. First, we propose a powerful DSM-based communication abstraction that formalizes complex cluster-based data exchange patterns, such as reduce, shuffle and multiply. Second, we introduce a dataflow analyzer that generalizes loop scheduling, resource mapping, and tile selection to the distributed memory hierarchy; it determines the optimal execution order and tile sizes by quantifying data movement across memory levels. Finally, FlashFuser integrates these components into a unified search engine that employs analytical cost modeling and DSM-aware pruning strategies to efficiently discover the optimal execution plan. Our evaluation on an NVIDIA H100 GPU shows that FlashFuser reduces memory access by 58% and delivers kernel speedups of 3.3x against highly-tuned libraries and 4.1x against state-of-the-art compilers, resulting in a 1.24x end-to-end speedup.