SKS. Kandasamy

S. Kandasamy

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


S. Kandasamy has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Experimental Investigations on the Properties of Coal-Ash Brick Units as Green Building Materials

    by K. Vidhya, S. Kandasamy

    In India, production of electricity by thermal power plants accounts for more than 50% of the total electricity generated. While doing so, the thermal power plants produce about 117 million tons per year of coal ash as waste materials. Improper disposal of this ash poses a threat to the environment. It requires allocation of vast land area for dumping/storing and it pollutes the land. Ash generated in thermal power plants falls into two categories, namely, fly ash and pond ash. One of the ways to minimize the harmful effects due to unsafe disposal of ash on the environment is to utilize the ash in the construction industry as an admixture in brick making, cement manufacture, etc. Moreover, in the conventional brick making, a precious natural soil resource is overexploited. One of the essential requirements of green building is to use environmentally friendly building materials as well as to reuse/ recycle industrial waste products like fly ash and pond ash. If the fly ash and pond ash are used optimally by replacing clay in the brick-manufacturing industry, then this waste material can be treated as greener material. This will also reduce the pressure on the excavation of soil. Besides energy-saving methodologies, green building involves the application of all technologies and using of materials without affecting the natural resources. In this investigation, an attempt was made to devise ways for the optimal use of pond ash in manufacturing coal-ash bricks. This article presents the experimental results for coal ash brick made up of pond ash with fly ash, lime, gypsum, and stone dust. The fundamental strength and durability tests were conducted to evaluate the basic properties of bricks. An energy dispersive x-ray diffraction study and a scanning electron microscope (SEM) study were carried out for elemental analysis and to analyze the chemical composition of the abovementioned materials.


  • Finite Element Analysis and Damage Indices for Flexural Behavior of Rural Concrete Composites

    by M. Sivaraja, S. Kandasamy

    In this article, finite element analysis using commercial software ANSYS 10 for rural fibrous concrete composite beams under flexural static loading is presented. Also damage indices for different fibrous beams under flexural cyclic loading are obtained using the available simple damage index formula. Rural fibers such as nylon, plastic, tyre, coir, and sugarcane are taken for finite element analysis, and rice husk is also taken with above said fibers for damage index prediction. Three volume fractions such as 0.5%, 1%, and 1.5% are used at a constant aspect ratio of 60. The results of finite element analysis are compared with experimental values. Damage indices of different fibrous concrete specimens are discussed, taking 0.5 as the desired value.

  • Test of Void-Filled SHS Beams Under Cyclic Loading

    by S. Arivalagan, S. Kandasamy

    This paper describes a series of tests to failure of concrete filled (composite) tubular beams subjected to cyclic loading. The beams made from steel grade of Yst310 at 345 MPa nominal yield stress, square hollow sections (SHS), depth-to-thickness ratios in the range of 20.5 were tested. The effects of these loading protocols on the elastic hysteretic behavior of the SHS beams were examined. The SHS beams exhibited stable hysteretic behavior up to local buckling, and then showed considerable degradation in strength and ductility depending on d/t ratios. First-cycle yield load moments predicted in tested composite beam specimens were compared with standard CIDECT moments. The effect of strength, ductility, and energy absorption capacity of the beams were examined.


  • Characterization of Concrete Composites for Energy Absorption

    by M. Sivaraja, S. Kandasamy

    Seismic resistance calls for energy absorption in critical location of building/structural systems. Energy dissipation through moment—rotation—flexibility and load—deflection—ductility is aimed at in the development of composites. The present constructions are mostly in brick, mud and concrete and these materials are notoriously weak in tension and have meager energy absorbing capabilities. Hence the focus of the present study is to characterize the structure related and durability properties of locally available organic and inorganic waste composites like plastics, rubber, corn, rice husk, coir etc., for achieving reasonable energy absorbing capacity. In this characterization stress—strain, moment-rotation and load—deflection will be identified and the energy enhancement over conventional concrete will be characterized.