Aghilas Brahmi
Research Subjects
Aghilas Brahmi has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Ahmed Belaadi
Department of Mechanical Engineering, Faculty of Technology, Skikda, Algeria
4 shared publications - Salima AitAli
Laboratoire des Matériaux et Développement Durables (LMDD), Département de Génie des Procédés, Faculté des Sciences et des Sciences Appliquées Université A.M.O Bouira Algeria
4 shared publications - Salima Ziani
Laboratoire des Matériaux et Développement Durables (LMDD), Département de Génie des Procédés, Faculté des Sciences et des Sciences Appliquées Université A.M.O Bouira Algeria
4 shared publications - Djamel Ghernaout
Department of Chemical Engineering, College of Engineering, University of Ha’il, PO Box 2440, Ha’il 81441, Saudi Arabia
3 shared publications Hafit Khireddine
3 shared publicationsAida Zaabar
2 shared publications
Latest Publications
- Open Access
- 18 January 2026
- Published by Elsevier in Results in Engineering
- Vol. 29
A sustainable bioadsorbent approach for tetracycline adsorption from aqueous solutions using calcined chicken bone waste: Optimization via response surface methodology
- 18 January 2026
- Published by Elsevier in Results in Engineering
- Vol. 29
Open AccessA sustainable bioadsorbent approach for tetracycline adsorption from aqueous solutions using calcined chicken bone waste: Optimization via response surface methodology
- Open Access
- 25 December 2025
- Published by Elsevier in Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Vol. 734
Surface charge engineering of phosphoric acid-activated geopolymers via hydroxyapatite incorporation for enhanced anionic water pollutant removal
- 25 December 2025
- Published by Elsevier in Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Vol. 734
Open AccessSurface charge engineering of phosphoric acid-activated geopolymers via hydroxyapatite incorporation for enhanced anionic water pollutant removal
- Open Access
- 23 December 2025
- Published by Elsevier in Energy Conversion and Management: X
- Vol. 29
Kinetic, thermodynamic, and process evaluation of Dracaena draco biomass fiber pyrolysis for sustainable biofuel production
- 23 December 2025
- Published by Elsevier in Energy Conversion and Management: X
- Vol. 29
Open AccessKinetic, thermodynamic, and process evaluation of Dracaena draco biomass fiber pyrolysis for sustainable biofuel production
- Open Access
- 5 December 2025
- Published by Elsevier in Process Safety and Environmental Protection
- Vol. 206
Synergistic enhancement of hydroxyapatite-phosphoric acid-activated metakaolin-based geopolymers for sustainable and efficient removal of toxic metal ions in wastewater treatment: An experimental study supported by density functional theory insights
- 5 December 2025
- Published by Elsevier in Process Safety and Environmental Protection
- Vol. 206
Open AccessSynergistic enhancement of hydroxyapatite-phosphoric acid-activated metakaolin-based geopolymers for sustainable and efficient removal of toxic metal ions in wastewater treatment: An experimental study supported by density functional theory insights
- Open Access
- 3 December 2025
- Published by Elsevier in Results in Engineering
- Vol. 29
Cistus albidus L. cellulose-based bioadsorbent: An innovative eco-friendly method for removing basic fuchsin dye from water solutions and DFT mechanistic insights
- 3 December 2025
- Published by Elsevier in Results in Engineering
- Vol. 29
Open AccessCistus albidus L. cellulose-based bioadsorbent: An innovative eco-friendly method for removing basic fuchsin dye from water solutions and DFT mechanistic insights
- Open Access
- 27 September 2024
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1321
Fluoro-Hydroxyapatite/Chitosan composites as an eco-friendly adsorbent for Direct Red 23 dye removal: Optimization through Response Surface Methodology
- 27 September 2024
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1321
Open AccessFluoro-Hydroxyapatite/Chitosan composites as an eco-friendly adsorbent for Direct Red 23 dye removal: Optimization through Response Surface Methodology
- 20 June 2024
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 31 (30) , 43262-43280
Preparatiοn οf pοrοus hydrοxyapatite–metakaοlin geοpοlymer granules fοr adsοrptiοn applicatiοns using pοlyethylene glycοl as pοrοgen agent and sοdium dοdecyl sulfate as aniοnic surfactant
This study investigated the elaboration of novel porous absorbent granules by mixing powdered hydroxyapatite, metakaolin, sodium metasilicate, polyethylene glycol, and sodium dodecyl sulfate (SDS), an anionic surfactant. The effect of sodium dodecyl sulfate (SDS) was then studied by introducing it as a powder to the powdered mixture or dissolved into the granulation fluid. Characterization of the granules indicated that the incorporation of SDS dissolved in the granulation fluid into the G-PEG granules improved their specific surface area (97.9 m2/g) and porosity, resulting in a synergistic increase in the adsorption of crystal violet and methylene blue dyes compared to G-PEG granules and hydroxyapatite or metakaolin geopolymer alone. Moreover, the granules exhibited satisfactory compressive strength of 0.81 MPa, making them suitable for large-scale adsorption columns. Finally, the regeneratiοn prοcess οf the granules was modeled and optimized by using surface response methodology based on Box–Behnken design. The granules cοuld be regenerated fοr eight cycles under οptimum cοnditiοns οf acetic acid cοncentratiοn οf 0.72 mοl/L, a temperature οf 323 K, and a cοntact time οf 173.22 min, withοut a significant lοss in the adsοrptiοn capacity οr degradatiοn οf the granules. These results suggest that the pοrοus granules prepared in this study have pοtential tο be used in industrial wastewater treatment. Graphical Abstract
- 20 June 2024
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 31 (30) , 43262-43280
Preparatiοn οf pοrοus hydrοxyapatite–metakaοlin geοpοlymer granules fοr adsοrptiοn applicatiοns using pοlyethylene glycοl as pοrοgen agent and sοdium dοdecyl sulfate as aniοnic surfactant
This study investigated the elaboration of novel porous absorbent granules by mixing powdered hydroxyapatite, metakaolin, sodium metasilicate, polyethylene glycol, and sodium dodecyl sulfate (SDS), an anionic surfactant. The effect of sodium dodecyl sulfate (SDS) was then studied by introducing it as a powder to the powdered mixture or dissolved into the granulation fluid. Characterization of the granules indicated that the incorporation of SDS dissolved in the granulation fluid into the G-PEG granules improved their specific surface area (97.9 m2/g) and porosity, resulting in a synergistic increase in the adsorption of crystal violet and methylene blue dyes compared to G-PEG granules and hydroxyapatite or metakaolin geopolymer alone. Moreover, the granules exhibited satisfactory compressive strength of 0.81 MPa, making them suitable for large-scale adsorption columns. Finally, the regeneratiοn prοcess οf the granules was modeled and optimized by using surface response methodology based on Box–Behnken design. The granules cοuld be regenerated fοr eight cycles under οptimum cοnditiοns οf acetic acid cοncentratiοn οf 0.72 mοl/L, a temperature οf 323 K, and a cοntact time οf 173.22 min, withοut a significant lοss in the adsοrptiοn capacity οr degradatiοn οf the granules. These results suggest that the pοrοus granules prepared in this study have pοtential tο be used in industrial wastewater treatment. Graphical Abstract
- 12 June 2023
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 42 (6)
Application of central composite design and response surface methodology for the study of extraction of gentian violet dye in aqueous solution by polystyrene membrane modified with oleic acid
The present study is interested in removal of a cationic dye gentian violet (GV) using a polystyrene membrane (PS) activated with oleic acid (OA). These innovative membranes were developed by using PS as the base polymer and OA as extractant. The best matrix obtained was characterized by using Fourier transform infrared spectroscopy (FTIR) and x‐ray diffraction (XRD), and then applied in the extraction of a cationic GV dye. The effects of an extraction ratio (OA/PS) in the PS‐AO matrix, initial GV dye concentration ([GV]0), and pH of the solution were studied in a batch reactor. The thermodynamic parameters (, , and ) have been calculated. Therefore, the GV extraction onto the PS‐OA matrix is an exothermic and spontaneous process. In addition, the slop method confirms that the chemical formula of the extracted OA‐GV complex is GV‐RHR. The central composite design (CCD) was used to determine the conditions of each experimental run, and extraction optimization was achieved using response surface methodology (RSM). The results showed that the quadratic regression model was statistically significant (0.9994), and the parameters studied had a profound effect on the extraction efficiency. The optimum GV extraction efficiency of 99% was achieved at an extractant ratio of 1, pH of 8, and [GV]0 of 10 mg L−1. The findings of the current study reveal that PS‐AO matrix is an advantageous and effective membrane for the extraction of GV from aqueous solutions, both environmentally and economically, it can be regenerated and used up to five times.
- 12 June 2023
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 42 (6)
Application of central composite design and response surface methodology for the study of extraction of gentian violet dye in aqueous solution by polystyrene membrane modified with oleic acid
The present study is interested in removal of a cationic dye gentian violet (GV) using a polystyrene membrane (PS) activated with oleic acid (OA). These innovative membranes were developed by using PS as the base polymer and OA as extractant. The best matrix obtained was characterized by using Fourier transform infrared spectroscopy (FTIR) and x‐ray diffraction (XRD), and then applied in the extraction of a cationic GV dye. The effects of an extraction ratio (OA/PS) in the PS‐AO matrix, initial GV dye concentration ([GV]0), and pH of the solution were studied in a batch reactor. The thermodynamic parameters (, , and ) have been calculated. Therefore, the GV extraction onto the PS‐OA matrix is an exothermic and spontaneous process. In addition, the slop method confirms that the chemical formula of the extracted OA‐GV complex is GV‐RHR. The central composite design (CCD) was used to determine the conditions of each experimental run, and extraction optimization was achieved using response surface methodology (RSM). The results showed that the quadratic regression model was statistically significant (0.9994), and the parameters studied had a profound effect on the extraction efficiency. The optimum GV extraction efficiency of 99% was achieved at an extractant ratio of 1, pH of 8, and [GV]0 of 10 mg L−1. The findings of the current study reveal that PS‐AO matrix is an advantageous and effective membrane for the extraction of GV from aqueous solutions, both environmentally and economically, it can be regenerated and used up to five times.