Shuichiro Sugiyama
Shuichiro Sugiyama has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Arindam Banerjee
Department of Mathematics, Indian Institute of Technology, Kharagpur 721302, India
1 shared publication Hirotaka Katayama
Panasonic Corporation, Kadoma, Osaka 571-8686, Japan
1 shared publication- Hitoshi Sai
National Institute of Advanced Industrial Science and Technology, Tsukuba, Ibaraki 305-8568, Japan
1 shared publication I. Takagi
Chubu Electric Power Company, Inc., Nagoya, Japan
1 shared publicationIsao Yoshida
Photovoltaic Power Generation Technology Research Association (PVTEC), Tsukuba 305-8568, Japan
1 shared publication- Jeffrey Yang
Fischell Department of Bioengineering University of Maryland College Park Maryland USA
1 shared publication
Latest Publications
- 25 May 2015
- Published by AIP Publishing in Applied Physics Letters
- Vol. 106 (21) , 213902
Triple-junction thin-film silicon solar cell fabricated on periodically textured substrate with a stabilized efficiency of 13.6%
We report a high-efficiency triple-junction thin-film silicon solar cell fabricated with the so-called substrate configuration. It was verified whether the design criteria for developing single-junction microcrystalline silicon (μc-Si:H) solar cells are applicable to multijunction solar cells. Furthermore, a notably high short-circuit current density of 32.9 mA/cm2 was achieved in a single-junction μc-Si:H cell fabricated on a periodically textured substrate with a high-mobility front transparent contacting layer. These technologies were also combined into a-Si:H/μc-Si:H/μc-Si:H triple-junction cells, and a world record stabilized efficiency of 13.6% was achieved.
- 25 May 2015
- Published by AIP Publishing in Applied Physics Letters
- Vol. 106 (21) , 213902
Triple-junction thin-film silicon solar cell fabricated on periodically textured substrate with a stabilized efficiency of 13.6%
We report a high-efficiency triple-junction thin-film silicon solar cell fabricated with the so-called substrate configuration. It was verified whether the design criteria for developing single-junction microcrystalline silicon (μc-Si:H) solar cells are applicable to multijunction solar cells. Furthermore, a notably high short-circuit current density of 32.9 mA/cm2 was achieved in a single-junction μc-Si:H cell fabricated on a periodically textured substrate with a high-mobility front transparent contacting layer. These technologies were also combined into a-Si:H/μc-Si:H/μc-Si:H triple-junction cells, and a world record stabilized efficiency of 13.6% was achieved.
- 1 May 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21504598,p. 694
Development of a Small and Wide-Range Three-Phase Current Sensor Using a MI Element
A three-phase electric current sensor is described in this paper using the magneto-impedance sensor. Experimental results show a low energy consumption of 20 mW and a wide measuring range of 1:600 obtained by using both the positive/negative equality alternating bias and the unequality bias. Hence, the measurement range of the developed compact size current sensor is 15 times as wide as that of the conventional sensor.
- 1 May 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21504598,p. 694
Development of a Small and Wide-Range Three-Phase Current Sensor Using a MI Element
A three-phase electric current sensor is described in this paper using the magneto-impedance sensor. Experimental results show a low energy consumption of 20 mW and a wide measuring range of 1:600 obtained by using both the positive/negative equality alternating bias and the unequality bias. Hence, the measurement range of the developed compact size current sensor is 15 times as wide as that of the conventional sensor.
- 1 January 1998
- Published by Springer Nature in MRS Proceedings
- Vol. 507
Material Issues in the Commercialization of Amorphous Silicon Alloy Thin-Film Photovoltaic Technology
Two significant developments took place in 1997 in the field of amorphous silicon alloy photovoltaic technology. First, a world record stable cell efficiency of 13% was demonstrated using a spectral-splitting, triple-junction structure. Second, a triple-junction photovoltaic manufacturing facility of an annual capacity of 5 MW was commissioned. In order to make the transition from R&D to production, critical material issues and deposition methods which ensure the lowest module cost per delivered watt needed to be evaluated. In this paper, we discuss some of these issues with special reference to the cell materials.
- 1 January 1998
- Published by Springer Nature in MRS Proceedings
- Vol. 507
Material Issues in the Commercialization of Amorphous Silicon Alloy Thin-Film Photovoltaic Technology
Two significant developments took place in 1997 in the field of amorphous silicon alloy photovoltaic technology. First, a world record stable cell efficiency of 13% was demonstrated using a spectral-splitting, triple-junction structure. Second, a triple-junction photovoltaic manufacturing facility of an annual capacity of 5 MW was commissioned. In order to make the transition from R&D to production, critical material issues and deposition methods which ensure the lowest module cost per delivered watt needed to be evaluated. In this paper, we discuss some of these issues with special reference to the cell materials.
- 1 January 1992
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 7 (1) , 332-338
An investigation of breakdown voltage with small arc current due to poor contact in SF/sub 6/ gas
- 1 January 1992
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 7 (1) , 332-338
An investigation of breakdown voltage with small arc current due to poor contact in SF/sub 6/ gas