KGKai Guo

Kai Guo

*This is an algorithmically generated author record based on publicly available information.

Kai Guo has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    From Single-Level Cassie Contact to Cascaded Suspension: Reconstruction of the Wetting Model for Hydrophobic Polyimide Walls with Hierarchical Micro/Nanostructures

    by Guo Kai, Shaofeng Liang, Peng Zhang, Lv Yuling, Luo Xiaoming

    In electric-field-enhanced oil-water separation, micro/nanostructured composite walls have attracted considerable attention because of their ability to regulate droplet behavior. Laser-induced polyimide (PI) walls with hierarchical micro/nanostructures exhibit low adhesion and strong resistance to wetting; however, the existing Cassie-Baxter model is based on a single-level planar-contact assumption and therefore cannot adequately describe the actual contact state at such cascaded interfaces. Here, laser-induced micro/nanostructured PI walls were investigated through morphological characterization, contact-angle measurements, and breakthrough-pressure analysis to elucidate their solid-liquid contact state and superhydrophobic mechanism. The static pressure of a droplet was far below the pressure required to penetrate either the primary or secondary structure, indicating a stable cascaded suspension state. The contact angle exceeded 160°, corresponding to a back-calculated solid-liquid contact fraction below 5%, whereas the conventional model predicted a geometric area fraction of approximately 50%. This discrepancy demonstrates the failure of the classical model for hierarchical interfaces. Accordingly, a Nano-Bridging Cascaded Suspension (NBCS) model is proposed, in which the actual contact area is decomposed into the macroscopic support contribution of the microscale structure and the microscopic bridging contribution of the nanoscale structure. The model reveals how the two structural levels act synergistically to reduce the contact area, discretize the three-phase contact line, and stabilize the trapped air layer. These findings provide a theoretical basis for designing biomimetic anti-wetting walls.

  • Microscopic stabilization mechanism of droplet in the coupling of electric and rotating flow fields

    by Bin Li, Jun Yin, Xiaohui Dou, Zhiqian Sun, Kai Guo, Zhentao Wang, Zhenbo Wang, Junfeng Wang


  • Electric Field-Induced Droplet Detachment and Transport on Biomimetic Superhydrophobic Surfaces with Beetle Elytra–Seta Composite Structures

    by Kai Guo, Zheqiu Yan, Zhihui Wang, Yuling Lü, Xiaoming Luo

    The regulation of droplet dynamics based on external electric fields and bioinspired functional surfaces has widespread applications in various fields. However, research on the coupling of these two factors to enhance oil-water separation efficiency is urgently needed. In this study, laser-induced and solvent treatment techniques were coupled to assemble a micronano setal and bioinspired beetle elytra textured substrate with the lotus effect, A "top conductive, bottom insulating" Desert beetle elytra micronano tuft composite texture (DBE) biomimetic superhydrophobic surface was fabricated. The droplet detachment and migration processes were analyzed to evaluate the surface performance. Additionally, a bioinspired surface correction coefficient (χ) was introduced, and a droplet detachment force model (ΔF) was established. Further comparative analysis of the droplet height ratio (Hw/Hw0), velocity (Vt), and contact line ratio (Lc) on three types of surfaces was conducted. The study found that compared with the previous artificial honeycomb microvilli texture (PLE) bionic hydrophobic surface, the DBE surface exhibited a 6.6% reduction in the electric field threshold (Ec = 77.9 kV/m), a 17.9% increase in the static contact angle, a 69.1% reduction in the critical rolling angle to 1.7°, and a shortening of the minimum jump time (tct) by 7.99%, 7.87%, and 17.27% under electric excitations of 86.9, 119.5, and 217.2 kV/m, respectively. This demonstrates that the DBE surface possesses "high contact angle and low adhesion force" properties, providing a new application approach for electrically induced high-efficiency oil-water separation.


  • Wetting characteristics of oil droplet in water on micro/nano pyramid array surfaces

    by Heqing Ma, Kai Guo, Xiaoya Liu, Zheqiu Yan, Haoran Wang, Xiaofang Lü

    The interaction mechanism between oil droplets and solid surfaces is explored, which is of great significance for the development of functionalized surfaces and the efficient coalescence of oil droplets in water. Based on the volume of fluid (VOF) model, numerical simulations are employed to analyze the wetting and spreading behavior of oil droplets on pyramid-textured surfaces. The influence of microstructure morphology and size on droplet spreading patterns, diffusion distance, and wetting behavior is systematically investigated. The results show that the spreading morphology of oil droplets is significantly influenced by microstructure geometry. Asymmetric pyramid structures (e.g., triangular and pentagonal pyramids) guide oil droplets to accelerate wetting along ridge directions, while symmetric pyramid structures (e.g., square and hexagonal pyramids) promote preferential filling of groove regions. The analysis of diffusion distances and pressure variations at the droplet center on different structured surfaces reveals that the pentagonal pyramid surface exhibits the largest spreading radius, whereas the triangular pyramid surface enhances droplet wettability on hydrophilic surfaces. Additionally, appropriately increasing the microstructure size reduces droplet adhesion, improves detachment efficiency, and optimizes the spreading morphology, thereby enhancing controllability over droplet movement direction.


  • Droplet detachment and transport on a biomimetic surface inspired by lotus leaves under the influence of an electric field

    by Kai Guo, Yin Bai, Yunrui Han, Zheqiu Yan, Yuling Lü, Xiaoming Luo

    This research explores the dynamics of droplet detachment and transport on a biomimetic surface, modeled after the microstructure and surface characteristics of lotus leaves, under the application of an electric field. Crucial detaching conditions for droplets, morphological alterations during disengagement, ensuing transport pathways, speeds, and other salient features under the electric field's sway are thoroughly analyzed and elucidated. The effects of parameters including electric field strength, surface wettability, and droplet properties on surface-detachment and collision behaviors were comprehensively evaluated. This research deepens our understanding of the interactions between bio-inspired interfaces and droplets and offers crucial theoretical and practical implications for the oil-water separation field.


  • Electrically-Induced Droplet Detachment and Transport on Bionic Honeycomb-Fiber Composite Surfaces

    by Kai Guo, Zheqiu Yan, Yunrui Han, Yin Bai, Yuling Lü, Xiaoming Luo

    The complex regulation of droplet dynamics, based on the application of external electric fields and micro/nano functional surfaces, has garnered widespread attention in fields such as enhanced oil-water separation, self-cleaning systems, and novel imaging technologies. In this study, a PLE surface (composite biomimetic hydrophobic surface with micron-level honeycomb texture and nanoscale villi) was fabricated. Using a high-speed microscopy system, the detachment and movement of droplets on the biomimetic surface under a direct current electric field were experimentally investigated. By introducing a biomimetic surface correction factor, (ξ), a polarization and force model for droplets on the PLE surface was established. The results indicate that the amount of polarized charge (Q) is positively correlated with the radius (R2), while the deformation degree (λ) is proportional to the electric field intensity (Ec). Key parameters for droplet detachment were determined, including the electric field threshold (Ec = 83.4 kV/m) and the correction factor (ξ = 0.1066). The relationship among surface electric field intensity Ec, droplet detachment time (TL), the ratio of droplet height change (Hs) to initial height (Hs0), droplet velocity (Vt), and contact line ratio (L*) was analyzed. It was found that there exists a power-law relationship between Ec and TL. Moreover, the PLE surface exhibits a more sensitive response to the applied electric field compared to the PI (polyimide) surface.


  • Microscopic Mechanism for Gradient Diffusion of Salt-Containing Droplets Induced by Electromagnetic Synergy: A Molecular Dynamics Study

    by Kai Guo, Ling Du, Xiao Ling, Yuling Lü, Limin He, Xiaoming Luo

    The electromagnetic synergy has been proven to be highly effective in separating oil-water emulsions. However, the dynamic impact mechanism of electromagnetic fields on the internal structure of salt droplets remains unclear. In this study, the molecular dynamics (MD) simulation was used to investigate the molecular diffusion of salt ions and water molecules, as well as the dynamic behavior of droplets under the combined influence of electromagnetic fields. The results indicate that ions accumulate in the electromagnetic synergistic field, causing the deformation amplitude of droplets to be smaller than that in a single electric field. The magnetic field affects the energy of the system, when the magnetic field strength is between 1 and 5T, the nonbonded energy significantly increases nonlinearly; when the magnetic field strength is greater than 5T, the total energy of the system significantly changes. In addition, the viscosity of the medium is significantly lower when the intensity of the magnetic and electric fields is controlled within a specific range, providing a new way to regulate the fluidity of fluids.


  • Open Access

    Mechanism of polarized electromagnetic force generated by electromagnetic synergy on migration mode of droplets

    by Kai Guo, Xiaoya Liu, Yuling Lü, Xiao Ling, Jie Zhao

    The device of oil-water separation enhanced by electromagnetic synergy could potentially play a pivotal role in realizing the green oil gathering and transportation pretreatment in the future. In this paper, the high-speed microscopic experiment shows that the migration mode of a single droplet under the action of the polarized electromagnetic force is not consistent with the previous theoretical analysis. Theoretical analysis shows that the longitudinal migration mode of a droplet under the polarized electromagnetic force is oscillatory displacement. However, the experimental results show that the longitudinal movement direction of a droplet remains unchanged, and there is no oscillatory displacement. Moreover, the effect of the polarized electromagnetic force on a droplet is reflected in the form of enhancing longitudinal displacement. In addition, by solving the motion equation, the velocity difference of the droplet after a period is obtained, and the influence mechanism of the polarized electromagnetic force is discussed.