Takayuki Hoshi
Research Subjects
Research Interests
Takayuki Hoshi has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Yoichi Ochiai
University of Tsukuba, Tsukuba, Japan
4 shared publications - Tatsuki Fushimi
University of Tsukuba
2 shared publications - Yusuke Koroyasu
University of Tsukuba
2 shared publications - Amy Koike
University of Wisconsin-Madison, Madison, USA
1 shared publication - Asier Marzo
UpnaLab, Universidad Publica de Navarra, Pamplona, Navarre, Spain
1 shared publication - Bruce W. Drinkwater
University of Bristol
1 shared publication
Latest Publications
- Open Access
- 24 August 2026
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 137 (9) , 094001
Midair Single-Sided Acoustic Levitation in High-Pressure Regions of Zero-Order Bessel Beams
Acoustic levitation enables noncontact manipulation using sound waves. While conventional methods entrap particles at pressure nodes (zero-pressure region surrounded by high pressure), we demonstrate stable acoustic levitation and translation in midair within a high-pressure axial core of a zero-order Bessel beam for the first time. The trap operates at a long working distance, up to 397 mm ( 46.6 λ ), supports simultaneous multiparticle levitation, and maintains stability over obstacles. Our work establishes a new paradigm for single-sided acoustic manipulation in midair.
- 24 August 2026
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 137 (9) , 094001
Open AccessMidair Single-Sided Acoustic Levitation in High-Pressure Regions of Zero-Order Bessel Beams
Acoustic levitation enables noncontact manipulation using sound waves. While conventional methods entrap particles at pressure nodes (zero-pressure region surrounded by high pressure), we demonstrate stable acoustic levitation and translation in midair within a high-pressure axial core of a zero-order Bessel beam for the first time. The trap operates at a long working distance, up to 397 mm ( 46.6 λ ), supports simultaneous multiparticle levitation, and maintains stability over obstacles. Our work establishes a new paradigm for single-sided acoustic manipulation in midair.
- Open Access
- 17 May 2024
- Published by Oxford University Press (OUP) in Journal of Economic Entomology
- Vol. 117 (4) , 1616-1622
A new pest suction machine to control Bemisia tabaci (Hemiptera: Aleyrodidae) in tomato greenhouses
The sweetpotato whitefly Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae) is challenging to control using chemical pesticides owing to its resistance to many insecticides. Thus, there has been an increasing demand for alternative control measures. Thus, this study evaluated the efficacy of a newly designed pest suction machine to manage whiteflies on tomato plants (Solanum lycopersicum L.) (Solanales: Solanaceae) in greenhouses over 2 seasons. The suction machine comprised a battery-powered cart with a mounted suction unit, an ultrasonic device, and green lights. Ultrasonic irradiation provided non-contact vibration, facilitating the movement of adult whiteflies away from the plants, and green lights attracted them to the suction device. This combination effectively captured whitefly adults, even with a weak suction force, saving electricity consumption. The efficacy of suction machine was further evaluated by measuring the number of whitefly adults caught by the machine and the number of adults and nymphs remaining on the tomato leaves. The whitefly population was considerably lower in the treated blocks than in the non-treated blocks in the autumn trial. The machine reduced the density of whitefly adults without using chemical pesticides. Although a lot of optimizations would be required, suction control is an additional and alternative strategy that may be incorporated in the integrated pest management of whiteflies on greenhouse tomato plants.
- 17 May 2024
- Published by Oxford University Press (OUP) in Journal of Economic Entomology
- Vol. 117 (4) , 1616-1622
Open AccessA new pest suction machine to control Bemisia tabaci (Hemiptera: Aleyrodidae) in tomato greenhouses
The sweetpotato whitefly Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae) is challenging to control using chemical pesticides owing to its resistance to many insecticides. Thus, there has been an increasing demand for alternative control measures. Thus, this study evaluated the efficacy of a newly designed pest suction machine to manage whiteflies on tomato plants (Solanum lycopersicum L.) (Solanales: Solanaceae) in greenhouses over 2 seasons. The suction machine comprised a battery-powered cart with a mounted suction unit, an ultrasonic device, and green lights. Ultrasonic irradiation provided non-contact vibration, facilitating the movement of adult whiteflies away from the plants, and green lights attracted them to the suction device. This combination effectively captured whitefly adults, even with a weak suction force, saving electricity consumption. The efficacy of suction machine was further evaluated by measuring the number of whitefly adults caught by the machine and the number of adults and nymphs remaining on the tomato leaves. The whitefly population was considerably lower in the treated blocks than in the non-treated blocks in the autumn trial. The machine reduced the density of whitefly adults without using chemical pesticides. Although a lot of optimizations would be required, suction control is an additional and alternative strategy that may be incorporated in the integrated pest management of whiteflies on greenhouse tomato plants.
- 1 April 2024
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 63 (4) , 04SP67
Optical fiber-based acoustic intensity microphone for high-intensity airborne ultrasound measurement
The increasing use of airborne ultrasonic waves in daily life, driven by advances in parametric and phased arrays, has led to innovative applications like highly directional speakers, non-contact tactile feedback, 3D acoustic levitation, and medical therapies. These advancements necessitate accurate measurement of high-intensity ultrasonic waves, exceeding the capability of traditional microphones limited to around 160 dB, and highlight the growing importance of measuring the sound field not merely as scalar (sound pressure) but as vector (acoustic intensity) to accommodate future technological developments. This paper introduces an acoustic intensity microphone using optical fibers as probes to overcome these limitations. The proposed method replaces the two ordinary microphones used in the traditional acoustic intensity measurement method with thin optical fibers, minimizing sound field disturbance. Experimental validation and the structure of a practical acoustic intensity microphone are discussed, building upon foundational work presented at USE2023 with added verification and insights.
- 1 April 2024
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 63 (4) , 04SP67
Optical fiber-based acoustic intensity microphone for high-intensity airborne ultrasound measurement
The increasing use of airborne ultrasonic waves in daily life, driven by advances in parametric and phased arrays, has led to innovative applications like highly directional speakers, non-contact tactile feedback, 3D acoustic levitation, and medical therapies. These advancements necessitate accurate measurement of high-intensity ultrasonic waves, exceeding the capability of traditional microphones limited to around 160 dB, and highlight the growing importance of measuring the sound field not merely as scalar (sound pressure) but as vector (acoustic intensity) to accommodate future technological developments. This paper introduces an acoustic intensity microphone using optical fibers as probes to overcome these limitations. The proposed method replaces the two ordinary microphones used in the traditional acoustic intensity measurement method with thin optical fibers, minimizing sound field disturbance. Experimental validation and the structure of a practical acoustic intensity microphone are discussed, building upon foundational work presented at USE2023 with added verification and insights.
- Open Access
- 19 June 2023
- Published by Oxford University Press (OUP) in PNAS Nexus
- Vol. 2 (7) , pgad207
Microfluidic platform using focused ultrasound passing through hydrophobic meshes with jump availability
Applications in chemistry, biology, medicine, and engineering require the large-scale manipulation of a wide range of chemicals, samples, and specimens. To achieve maximum efficiency, parallel control of microlitre droplets using automated techniques is essential. Electrowetting-on-dielectric (EWOD), which manipulates droplets using the imbalance of wetting on a substrate, is the most widely employed method. However, EWOD is limited in its capability to make droplets detach from the substrate (jumping), which hinders throughput and device integration. Here, we propose a novel microfluidic system based on focused ultrasound passing through a hydrophobic mesh with droplets resting on top. A phased array dynamically creates foci to manipulate droplets of up to 300 μL. This platform offers a jump height of up to 10 cm, a 27-fold improvement over conventional EWOD systems. In addition, droplets can be merged or split by pushing them against a hydrophobic knife. We demonstrate Suzuki-Miyaura cross-coupling using our platform, showing its potential for a wide range of chemical experiments. Biofouling in our system was lower than in conventional EWOD, demonstrating its high suitability for biological experiments. Focused ultrasound allows the manipulation of both solid and liquid targets. Our platform provides a foundation for the advancement of micro-robotics, additive manufacturing, and laboratory automation.
- 19 June 2023
- Published by Oxford University Press (OUP) in PNAS Nexus
- Vol. 2 (7) , pgad207
Open AccessMicrofluidic platform using focused ultrasound passing through hydrophobic meshes with jump availability
Applications in chemistry, biology, medicine, and engineering require the large-scale manipulation of a wide range of chemicals, samples, and specimens. To achieve maximum efficiency, parallel control of microlitre droplets using automated techniques is essential. Electrowetting-on-dielectric (EWOD), which manipulates droplets using the imbalance of wetting on a substrate, is the most widely employed method. However, EWOD is limited in its capability to make droplets detach from the substrate (jumping), which hinders throughput and device integration. Here, we propose a novel microfluidic system based on focused ultrasound passing through a hydrophobic mesh with droplets resting on top. A phased array dynamically creates foci to manipulate droplets of up to 300 μL. This platform offers a jump height of up to 10 cm, a 27-fold improvement over conventional EWOD systems. In addition, droplets can be merged or split by pushing them against a hydrophobic knife. We demonstrate Suzuki-Miyaura cross-coupling using our platform, showing its potential for a wide range of chemical experiments. Biofouling in our system was lower than in conventional EWOD, demonstrating its high suitability for biological experiments. Focused ultrasound allows the manipulation of both solid and liquid targets. Our platform provides a foundation for the advancement of micro-robotics, additive manufacturing, and laboratory automation.
- 17 September 2022
- Published by Springer Nature
- p. 1-20
Introduction to Ultrasonic Mid-Air Haptic Effects
- 17 September 2022
- Published by Springer Nature
- p. 1-20
Introduction to Ultrasonic Mid-Air Haptic Effects
- Open Access
Sonovortex: Aerial Haptic Layer Rendering by Aerodynamic Vortex and Focused Ultrasound
In this paper, a method of rendering aerial haptics that uses an aerodynamic vortex and focused ultrasound is presented. Significant research has been conducted on haptic applications based on multiple phenomena such as magnetic and electric fields, focused ultrasound, and laser plasma. By combining multiple physical quantities; the resolution, distance, and magnitude of force are enhanced. To combine multiple tactile technologies, basic experiments on resolution and discrimination threshold are required. Separate user studies were conducted using aerodynamic and ultrasonic haptics. Moreover, the perception of their superposition, in addition to their resolution, was tested. Although these fields cause no direct interference, the system enables the simultaneous perception of the tactile feedback of both stimuli. The results of this study are expected to contribute to expanding the expression of aerial haptic displays based on several principles.
Open AccessSonovortex: Aerial Haptic Layer Rendering by Aerodynamic Vortex and Focused Ultrasound
In this paper, a method of rendering aerial haptics that uses an aerodynamic vortex and focused ultrasound is presented. Significant research has been conducted on haptic applications based on multiple phenomena such as magnetic and electric fields, focused ultrasound, and laser plasma. By combining multiple physical quantities; the resolution, distance, and magnitude of force are enhanced. To combine multiple tactile technologies, basic experiments on resolution and discrimination threshold are required. Separate user studies were conducted using aerodynamic and ultrasonic haptics. Moreover, the perception of their superposition, in addition to their resolution, was tested. Although these fields cause no direct interference, the system enables the simultaneous perception of the tactile feedback of both stimuli. The results of this study are expected to contribute to expanding the expression of aerial haptic displays based on several principles.
- Open Access
- 31 July 2015
- Published by Association for Computing Machinery (ACM)
- p. 1
Fairy lights in femtoseconds
- 31 July 2015
- Published by Association for Computing Machinery (ACM)
- p. 1
Open AccessFairy lights in femtoseconds
- Open Access
- 1 January 2010
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2010, _1P1-F12_1
1P1-F12 A Ring-type Device Measuring Finger Vibration
- 1 January 2010
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2010, _1P1-F12_1
Open Access1P1-F12 A Ring-type Device Measuring Finger Vibration