Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Chunjiang Yu has a total of 76 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Mixed-Lignin Precursor Engineering for Hierarchically Porous Pseudo-Graphitic Carbon Toward High-Performance Supercapacitors

    by Chenhao Sun, Zhongyang Luo, Shurong Wang, Chunjiang Yu

    Developing biomass-derived carbon electrodes with simultaneously optimized pore architecture, graphitic ordering, and surface chemistry remains a challenge for high-performance supercapacitors. Herein, a dual-lignin precursor engineering strategy based on lignosulfonate and alkaline lignin is proposed to construct hierarchically porous carbons via an ex situ method. Benefiting from the complementary characteristics and cooperative interactions of the two lignins, the optimized carbon exhibits a well-balanced porous architecture composed of interconnected carbon nanosheets with predominantly pseudo-graphitic domains accompanied by locally graphitized regions. The mixed-lignin strategy effectively regulates sulfur retention and removal during carbonization, while the coexistence of oxygen- and sulfur-containing functional groups may improve electrode wettability and contribute to charge storage, thereby favoring substantial outer-surface charge accessibility with contributions from other charge-storage processes. Among all samples, the optimized 2L1A electrode delivers a high specific capacitance of 386.7 F g−1 at 1 A g−1 in a three-electrode configuration. The assembled symmetric supercapacitor delivers an energy density of 40.4 Wh kg−1 together with 97.4% capacitance retention after 10,000 charge–discharge cycles. Comprehensive kinetic analyses further demonstrate rapid electron/ion transport, predominant surface-controlled charge storage, and excellent reversibility. This work demonstrates the potential of mixed-lignin precursor engineering for the rational design of high-performance carbon electrodes for advanced supercapacitors.

  • Open Access

    Feasibility Study on Direct Co-Firing of Typical Biomass Types in Coal-Fired Circulating Fluidized Bed Boilers

    by Haoteng Zhang, Lihui Yu, Bingyi Jiang, Cuina Qin, Shuo Jiang, Chunjiang Yu

    This study experimentally investigated the movement, combustion, and potassium (K) and chlorine (Cl) migration behaviors of three biomass types: densified wood pellets (heavy), corn straw (lightweight), and wheat straw (lightweight, friable). The experiments were conducted under conditions representative of industrial coal-fired circulating fluidized bed (CFB) boilers, with a temperature range of 850–950 °C and a fluidization velocity of 6–8 m/s. Results show that densified wood pellets sink into the dense-phase zone and release volatiles slowly, in about 50 s. As the volatiles are nearly fully released, the pellets fracture multiple times along their length, eventually forming nearly spherical particles. Their movement and combustion processes closely resemble those of coal, making them suitable for direct co-firing in coal-fired CFB boilers. Conversely, corn straw and wheat straw exhibit low density, high volatile release rates (2 and 10 times that of wood pellets, respectively), rapid char fragmentation and abrasion, and high inherent K and Cl content (with >50% of K and >90% of Cl released). These properties lead to particle segregation, shortened gas-phase combustion time, an upward shift in heat release distribution, and potential risks such as high-temperature KCl corrosion, HCl dew point corrosion, ash slagging, and bed agglomeration. Therefore, untreated corn straw and wheat straw are unsuitable for co-firing in conventional coal-fired CFB boilers. This study provides essential data and engineering guidance: strict quality control is necessary for wood pellets to prevent Cl contamination, while pretreatment is mandatory for straw fuels. These findings offer practical insights for implementing diverse biomass co-firing strategies in coal-fired CFB boilers.

  • Open Access

    Novel Sampling and Sample Preparation Systems with Industrial Validation for Biomass–Coal Co-Combustion Ratios Based on 14C Determination

    by Pu Li, Zhongyang Luo, Xiaohuan Wang, Yinchen Wang, Chunjiang Yu, Zhiyang Yu, Shanhu Lin, Shenming Ran

    Focusing on enhancing the performance of the 14C method in determining biomass–coal co-combustion ratios, this study developed two novel sample preparation systems: a direct flue gas injection benzene synthesis system based on Liquid Scintillation Counting (LSC) and a direct flue gas sealing graphitization system based on Accelerator Mass Spectrometry (AMS). These systems reduced sample preparation time from 20–24 h to 6–8 h. Experimental validation showed relative errors in biomass blending ratios (1–40%) below ±4% for LSC and ±3% for AMS, except at the 1% blending condition. Compared with conventional methods, both accuracy and efficiency were significantly improved. An enhanced 14C-based industrial measurement scheme was established and successfully applied for monitoring biomass blending ratios (15–50%) in industrial facilities. Deviations between AMS and LSC were within ±3%, confirming the method’s accuracy, despite discrepancies with the Distributed Control System (DCS) estimates. Additionally, predictive formulas for 14C activity in biomass and air CO2 reduced economic investment, with relative errors from ±0.04% to ±3.25%. Overall, the new scheme improved accuracy by 50%, efficiency by 60%, and reduced detection costs by 60–80%, demonstrating feasibility and practical value for industrial applications.

  • Open Access

    Experimental Study on Single-Particle Combustion Characteristics of Large-Sized Wheat Straw in a Drop Tube Furnace

    by Haoteng Zhang, Lihui Yu, Cuina Qin, Shuo Jiang, Chunjiang Yu

    Co-firing large-sized straw biomass in pulverized coal boilers is a potential pathway for carbon emission reduction in China’s thermal power plants. However, experimental data on large-sized straw combustion under pulverized coal boiler combustion conditions are critically lacking. This study selected typical large-sized wheat straw particles. Employing a two-mode experimental setup in a drop tube furnace (DTF) system simulating pulverized coal boiler conditions, we systematically investigated the combustion behavior and alkali metal release characteristics of this large-sized straw biomass, with combustion processes summarized for diverse particle types. The findings reveal asynchronous combustion progression across particle surfaces due to heterogeneous mass transfer and gas diffusion; unique behaviors distinct from denser woody biomass, including bending deformation, fiber branching, and fragmentation, occur; significant and morphology-specific deformations occur during devolatilization; fragmentation universally produces particles of varied shapes (needle-like, flaky, blocky, semi-tubular) during char combustion; and potassium release exceeds 35% after complete devolatilization and surpasses 50% at a burnout degree exceeding 80%. This work provides essential experimental data on the fundamental combustion characteristics and alkali metal release of large-sized wheat straw particles under pulverized coal boiler combustion conditions, offering engineering application guidance for the direct co-firing of large-sized flexible straw biomass in pulverized coal boilers.


  • Open Access

    Experimental Study on Co-Firing of Coal and Biomass in Industrial-Scale Circulating Fluidized Bed Boilers

    by Haoteng Zhang, Chunjiang Yu

    Based on the low-carbon transition needs of coal-fired boilers, this study conducted industrial trials of direct biomass co-firing on a 620 t/h high-temperature, high-pressure circulating fluidized bed (CFB) boiler, gradually increasing the co-firing ratio. It used compressed biomass pellets, achieving stable 20 wt% (weight percent) operation. By analyzing boiler parameters and post-shutdown samples, the comprehensive impact of biomass co-firing on the boiler system was assessed. The results indicate that biomass pellets were blended with coal at the last conveyor belt section before the furnace, successfully ensuring operational continuity during co-firing. Further, co-firing biomass up rates of to 20 wt% do not significantly impact the fuel combustion efficiency (gaseous and solid phases) or boiler thermal efficiency and also have positive effects in reducing the bottom ash and SOx and NOx emissions and lowering the risk of low-temperature corrosion. The biomass co-firing slightly increases the combustion share in the dense phase zone and raises the bed temperature. The strong ash adhesion characteristics of the biomass were observed, which were overcome by increasing the ash blowing frequency. Under 20 wt% co-firing, the annual CO2 emissions reductions can reach 130,000 tons. This study provides technical references and practical experience for the engineering application of direct biomass co-firing in industrial-scale CFB boilers.


  • Open Access

    Improving the Methodology for Determining the Biomass/Coal Co-Combustion Ratio: Predictive Modeling of the 14C Activity of Pure Biomass

    by Yinchen Wang, Zhongyang Luo, Chunjiang Yu, Sheng Wang, Xiaohuan Wang, Peiliang Zhu

    Sampling and 14C detection of biomass are now essential steps to ensure the accuracy of the 14C method, but they require additional time and economic investment. When there are multiple types of biomass fuels, it is not possible to guarantee the uniformity of sampling. The 14C activity of biomass fuels exhibits variability, and this value significantly impacts the precision of the 14C method. Therefore, this study aims to investigate the influencing factors of 14C activity in biomass fuels. It also provides predicted values of 14C activity for different types of biomass fuels for each year from 2020 to 2030. Additionally, this study discusses the potential blending ratio measurement errors that may arise due to the uncertainties of the predicted values. The reduction in the 14C activity of biomass fuels can occur due to the utilization of fossil fuels, human activities, and the photosynthesis mode of C3 plants. This study presents a prediction method for determining the reduction factor. The other component of the prediction methodology involves determining the original 14C activity of biomass fuels. The 14C activity of the annual biomass is equal to the 14CO2 activity (the 14C activity of CO2) of the surrounding environment, and it experiences a decline of 0.355 pMC/year. The 14C activity has ranges of five types of perennial biomass fuels, including wood chips and branches, bark, leaves, wasted furniture, and abandoned building wood, for the time period between 2020 and 2030, are 97.34~102.84, 96.35~106.27, 96.35~102.64, 111.00~118.60, and 111.32~129.47 pMC, respectively. Based on these, this study introduces a new formula for calculating blending ratios, which enhances the current methodology. The calculation errors of blending ratios caused by the uncertainties of the predicted values are generally negligible, with the exception of wasted furniture and construction wood. The annual decrease in the blending ratio calculation error, caused by the uncertainty associated with the predicted value, can be observed. This study aims to reduce the implementation time and economic cost of the 14C method while ensuring the accuracy of biomass blending ratio detection.


  • Open Access

    Low-Grade Syngas Biomethanation in Continuous Reactors with Respect to Gas–Liquid Mass Transfer and Reactor Start-Up Strategy

    by Bingyi Jiang, Dongming Zhang, Xiao Hu, Ulf Söderlind, Gabriela Paladino, Shiromini Gamage, Erik Hedenström, Wennan Zhang, Juan Arrigoni, Anders Lundgren, et al.

    In order to utilize a wider range of low-grade syngas, the syngas biomethanation was studied in this work with respect to the gas–liquid mass transfer and the reactor start-up strategy. Two reactors, a continuous stirred tank (CSTR) and a bubble column with gas recirculation (BCR-C), were used in the experiment by feeding an artificial syngas of 20% H2, 50% CO, and 30% CO2 into the reactors at 55 °C. The results showed that the CH4 productivity was slightly increased by reducing the gas retention time (GRT), but was significantly improved by increasing the stirring speed in the CSTR and the gas circulation rate in the BCR-C. The best syngas biomethanation performance of the CSTR with a CH4 productivity of 22.20 mmol·Lr−1·day−1 and a yield of 49.01% was achieved at a GRT of 0.833 h and a stirring speed of 300 rpm, while for the BCR-C, the best performance with a CH4 productivity of 61.96 mmol·Lr−1·day−1 and a yield of 87.57% was achieved at a GRT of 0.625 h and a gas circulation rate of 40 L·Lr−1·h−1. The gas–liquid mass transfer capability provided by gas circulation is far superior to mechanical stirring, leading to a much better performance of low-grade syngas biomethanation in the BCR-C. Feeding H2/CO2 during the startup stage of the reactor can effectively stimulate the growth and metabolism of microorganisms, and create a better metabolic environment for subsequent low-grade syngas biomethanation. In addition, during the thermophilic biomethanation of syngas, Methanothermobacter is the dominant genus.


  • Open Access

    Accuracy Improvement of the 14C Method Applied in Biomass and Coal Co-Firing Power Stations

    by Yuxing Tang, Zhongyang Luo, Chunjiang Yu

    The 14C method is an approach used to determine the proportion of carbon derived from biomass and fossil fuel in the co-fired flue gas. Its accuracy is mainly limited by the deviations between the applied biomass fuels’ 14C activity reference value and virtual value. To enrich the theoretical basis of the 14C method when applied to a Chinese biomass and coal co-firing power station, this study performed field sampling experiments and established a new evaluation method based on domestic literature. Unlike previous studies, this study revealed that the 14C activity of biomass far away from fossil carbon sources was 0.7–1.3 pMC lower than the local atmosphere. The 14C activity laws between tree rings and barks, specifically between eucalyptus bark and poplar bark were different, due to different growth models and different bark regeneration cycles, respectively. According to the test results and renewal conclusions, this study proposed a reasonable idea for constructing the prediction equation of referential biomass fuels’ 14C activity. Following this equation, the biomass fuels’ 14C activities of biomass direct-fired power stations at different Chinese cities were obtained.