Qiang Yang
Research Subjects
Qiang Yang has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Han Xiong
Chongqing University
4 shared publications Huai-Qing Zhang
School of Electrical Engineering, Chongqing University 1 , Chongqing 40044
4 shared publications- Wenxiong Peng
Chongqing University
2 shared publications - Yi-Zhe Huang
School of Electrical Engineering, Chongqing University 1 , Chongqing 40044
2 shared publications - Ben-Xin Wang
Jiangnan University
1 shared publication Chunsheng Zhou Chunsheng Zhou
1 shared publication
Latest Publications
- 9 June 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (23)
Direct SMA-fed gradient-index metasurface array for efficient microwave power reception
Achieving a balance between efficiency and structural simplicity remains a challenge in conventional long-range wireless power reception systems. This study introduces a microwave power reception (MPR) metasurface array based on a gradient-index design. Operating at a center frequency of 5.8 GHz, the array enables efficient conversion and concentration of incident plane waves (PWs) into surface waves (SWs) through cosine-modulated gradient-index units, with a modulation center strategically placed along the array boundary. A key innovation lies in the direct integration of a standard SubMiniature Version A (SMA) connector at the modulation center to collect the concentrated surface wave energy, significantly simplifying the receiving structure and eliminating the need for multiple rectifiers or complex feed networks commonly used in traditional MPR systems. Compared with conventional rectenna arrays, the proposed design achieves a PW-SW conversion efficiency of 68.42%. Simulations, accounting for impedance mismatch at the SMA port, yield an energy collection efficiency of 46.71%, while experimental measurements confirm a peak efficiency of 39.24% at 5.8 GHz. Moreover, the overall system complexity is reduced by over 60%. Although the direct-feed approach introduces impedance mismatch that constrains further performance enhancement, the proposed method offers a low-cost, easily integrable MPR solution that maintains reasonable reception efficiency and simplifies both the design and fabrication processes for specific application scenarios.
- 9 June 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (23)
Direct SMA-fed gradient-index metasurface array for efficient microwave power reception
Achieving a balance between efficiency and structural simplicity remains a challenge in conventional long-range wireless power reception systems. This study introduces a microwave power reception (MPR) metasurface array based on a gradient-index design. Operating at a center frequency of 5.8 GHz, the array enables efficient conversion and concentration of incident plane waves (PWs) into surface waves (SWs) through cosine-modulated gradient-index units, with a modulation center strategically placed along the array boundary. A key innovation lies in the direct integration of a standard SubMiniature Version A (SMA) connector at the modulation center to collect the concentrated surface wave energy, significantly simplifying the receiving structure and eliminating the need for multiple rectifiers or complex feed networks commonly used in traditional MPR systems. Compared with conventional rectenna arrays, the proposed design achieves a PW-SW conversion efficiency of 68.42%. Simulations, accounting for impedance mismatch at the SMA port, yield an energy collection efficiency of 46.71%, while experimental measurements confirm a peak efficiency of 39.24% at 5.8 GHz. Moreover, the overall system complexity is reduced by over 60%. Although the direct-feed approach introduces impedance mismatch that constrains further performance enhancement, the proposed method offers a low-cost, easily integrable MPR solution that maintains reasonable reception efficiency and simplifies both the design and fabrication processes for specific application scenarios.
- 10 February 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (6)
Polarization-insensitive microwave power receiving composite array based on reflection phase gradient metasurfaces
This paper presents a polarization-insensitive microwave power receiving composite metasurface array. The composite array consists of a reflection phase gradient metasurface array and a horizontal omnidirectional antenna, with a central operating frequency of 5.8 GHz. The reflection phase gradient metasurface array elements are insensitive to the polarization of the incident wave and are arranged radially around the array center. This configuration creates a radial reflection phase gradient that efficiently converts incident plane waves of different polarizations into surface waves converging toward the center. The surface wave energy is then extracted by the horizontal omnidirectional antenna and converted into direct current (DC) by a rectifier. Numerical simulations demonstrate that the composite array maintains effective surface wave excitation and propagation toward the center for both circularly polarized and various horizontally polarized plane waves, achieving a plane wave-to-surface wave conversion efficiency of 74.89%. Experimental validation shows that the proposed array achieves a maximum energy collection efficiency of 62.23% and an RF-DC conversion efficiency of 39.96% over a broad frequency range of 5.6–6.0 GHz. This study achieves polarization insensitivity while simultaneously enhancing the operational efficiency of microwave energy receivers. The results offer a valuable design reference for leveraging reflection phase gradient arrays in wireless power transfer applications.
- 10 February 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (6)
Polarization-insensitive microwave power receiving composite array based on reflection phase gradient metasurfaces
This paper presents a polarization-insensitive microwave power receiving composite metasurface array. The composite array consists of a reflection phase gradient metasurface array and a horizontal omnidirectional antenna, with a central operating frequency of 5.8 GHz. The reflection phase gradient metasurface array elements are insensitive to the polarization of the incident wave and are arranged radially around the array center. This configuration creates a radial reflection phase gradient that efficiently converts incident plane waves of different polarizations into surface waves converging toward the center. The surface wave energy is then extracted by the horizontal omnidirectional antenna and converted into direct current (DC) by a rectifier. Numerical simulations demonstrate that the composite array maintains effective surface wave excitation and propagation toward the center for both circularly polarized and various horizontally polarized plane waves, achieving a plane wave-to-surface wave conversion efficiency of 74.89%. Experimental validation shows that the proposed array achieves a maximum energy collection efficiency of 62.23% and an RF-DC conversion efficiency of 39.96% over a broad frequency range of 5.6–6.0 GHz. This study achieves polarization insensitivity while simultaneously enhancing the operational efficiency of microwave energy receivers. The results offer a valuable design reference for leveraging reflection phase gradient arrays in wireless power transfer applications.
- 22 July 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (4)
A high-efficiency hybrid microwave power receiving metasurface array with dual matching of surface impedance and phase gradient
This paper proposes a hybrid microwave power receiving (MPR) metasurface array with efficient dual matching of surface impedance and phase gradient. The hybrid array comprises three components: a reflective phase gradient metasurface (R-PGM) array, a surface wave focusing array, and an energy harvesting port. The R-PGMs efficiently convert incident electromagnetic waves into surface waves. The surface wave focusing array then concentrates the energy onto the integrated harvesting port through dual matching of surface impedance and phase gradient. Connecting a rectifier circuit enables efficient microwave energy reception and RF-DC conversion, avoiding the need for multiple rectifiers or complex feeding networks in traditional MPR designs. Numerical analysis and experimental tests verify the superior performance of this hybrid array design in efficient microwave energy harvesting and RF-DC conversion, achieving 90.84% plane wave-to-surface wave conversion efficiency, 76.67% surface wave energy harvesting efficiency, and 49.28% overall RF-DC conversion efficiency. Across the wideband range of 5.6–6.0 GHz, the energy harvesting efficiency remains consistently high, demonstrating the superior characteristics and promising potential of this design in MPR device development.
- 22 July 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (4)
A high-efficiency hybrid microwave power receiving metasurface array with dual matching of surface impedance and phase gradient
This paper proposes a hybrid microwave power receiving (MPR) metasurface array with efficient dual matching of surface impedance and phase gradient. The hybrid array comprises three components: a reflective phase gradient metasurface (R-PGM) array, a surface wave focusing array, and an energy harvesting port. The R-PGMs efficiently convert incident electromagnetic waves into surface waves. The surface wave focusing array then concentrates the energy onto the integrated harvesting port through dual matching of surface impedance and phase gradient. Connecting a rectifier circuit enables efficient microwave energy reception and RF-DC conversion, avoiding the need for multiple rectifiers or complex feeding networks in traditional MPR designs. Numerical analysis and experimental tests verify the superior performance of this hybrid array design in efficient microwave energy harvesting and RF-DC conversion, achieving 90.84% plane wave-to-surface wave conversion efficiency, 76.67% surface wave energy harvesting efficiency, and 49.28% overall RF-DC conversion efficiency. Across the wideband range of 5.6–6.0 GHz, the energy harvesting efficiency remains consistently high, demonstrating the superior characteristics and promising potential of this design in MPR device development.
- 3 February 2024
- Published by Elsevier in Journal of Materials Science & Technology
- Vol. 191, 134-145
Microscale stray grains formation in single-crystal turbine blades of Ni-based superalloys
- 3 February 2024
- Published by Elsevier in Journal of Materials Science & Technology
- Vol. 191, 134-145
Microscale stray grains formation in single-crystal turbine blades of Ni-based superalloys
- Top Cited PapersOpen Access
- 19 June 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (25)
Polarization-insensitive composite gradient-index metasurface array for microwave power reception
A composite gradient-index metasurface (C-GM) array for microwave power reception (MPR) operating at 5.8 GHz center frequency was introduced. The array is insensitive to the polarization of incident plane waves and possesses cosine gradient modulation characteristics, which can convert the incident plane waves into surface waves focused at the center of the array. The focused surface wave energy is then collected by an omnidirectional antenna and fed back to a single rectifier for radio frequency (RF) to direct current (DC) conversion, resulting in DC output. Simulation results show that the array can fully excite surface waves under different polarized plane wave excitations, and the omnidirectional antenna has good matching characteristics with the array, achieving an energy collection efficiency of 66.52%. The array was fabricated and measured, achieving an energy reception efficiency of 59.91% and an RF-DC conversion efficiency of 34.83%, which is consistent with the simulation results. The proposed C-GM array can capture higher electromagnetic power by simply increasing its size, without the need for additional rectifiers or complex matching networks, making it a flexible and efficient MPR solution for different application scenarios.
- 19 June 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (25)
Top Cited PapersOpen AccessPolarization-insensitive composite gradient-index metasurface array for microwave power reception
A composite gradient-index metasurface (C-GM) array for microwave power reception (MPR) operating at 5.8 GHz center frequency was introduced. The array is insensitive to the polarization of incident plane waves and possesses cosine gradient modulation characteristics, which can convert the incident plane waves into surface waves focused at the center of the array. The focused surface wave energy is then collected by an omnidirectional antenna and fed back to a single rectifier for radio frequency (RF) to direct current (DC) conversion, resulting in DC output. Simulation results show that the array can fully excite surface waves under different polarized plane wave excitations, and the omnidirectional antenna has good matching characteristics with the array, achieving an energy collection efficiency of 66.52%. The array was fabricated and measured, achieving an energy reception efficiency of 59.91% and an RF-DC conversion efficiency of 34.83%, which is consistent with the simulation results. The proposed C-GM array can capture higher electromagnetic power by simply increasing its size, without the need for additional rectifiers or complex matching networks, making it a flexible and efficient MPR solution for different application scenarios.
- Open Access
- 30 November 2021
- Published by Optica Publishing Group in Optics Express
- Vol. 29 (25) , 41475-41484
Analyzing broadband tunable metamaterial absorbers by using the symmetry model
In this paper, a broadband tunable absorber based on bulk Dirac semimetal (BDS) in the far-infrared regime is studied. By optimizing the Femi energy and geometric size, the structure can achieve absorption levels greater than 90% in the 8.11-13.94 THz range, with a total thickness of 5.1 µm. Further, the bandwidth of this proposed absorber can be dynamically controlled by changing the Femi energy of the BDS instead of geometry. Meanwhile, the polarization and oblique incident angles in the TE and TM electromagnetic waves are also investigated. Finally, a new symmetry model is adopted to analyze the absorption mechanism, which is the innovation of this paper. This research result may provide potential applications for all types of optical photovoltaic devices and tunable biological chemistry sensors.
- 30 November 2021
- Published by Optica Publishing Group in Optics Express
- Vol. 29 (25) , 41475-41484
Open AccessAnalyzing broadband tunable metamaterial absorbers by using the symmetry model
In this paper, a broadband tunable absorber based on bulk Dirac semimetal (BDS) in the far-infrared regime is studied. By optimizing the Femi energy and geometric size, the structure can achieve absorption levels greater than 90% in the 8.11-13.94 THz range, with a total thickness of 5.1 µm. Further, the bandwidth of this proposed absorber can be dynamically controlled by changing the Femi energy of the BDS instead of geometry. Meanwhile, the polarization and oblique incident angles in the TE and TM electromagnetic waves are also investigated. Finally, a new symmetry model is adopted to analyze the absorption mechanism, which is the innovation of this paper. This research result may provide potential applications for all types of optical photovoltaic devices and tunable biological chemistry sensors.
- 1 January 2021
- Published by Chemical Society of Pakistan in Journal of the chemical society of pakistan
- Vol. 43 (1) , 67
Functionalization of Cellulose Paper by Coating Nano Metal-Organic Frameworks for Use as Photochromic Material
Journal of the Chemical Society of Pakistan (JCSP) is a bimonthly Journal which publishes results of original, unpublished research work and review articles in all fields of Chemistry.
- 1 January 2021
- Published by Chemical Society of Pakistan in Journal of the chemical society of pakistan
- Vol. 43 (1) , 67
Functionalization of Cellulose Paper by Coating Nano Metal-Organic Frameworks for Use as Photochromic Material
Journal of the Chemical Society of Pakistan (JCSP) is a bimonthly Journal which publishes results of original, unpublished research work and review articles in all fields of Chemistry.