Jia Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jia Zhang has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Yuan He
Tsinghua University
13 shared publications - Yimiao Sun
Tsinghua University
7 shared publications - Yunhao Liu
Tsinghua University
5 shared publications Xin Na
School of Software and BNRist, Tsinghua University, Beijing, China
4 shared publications- Xin Na
Tsinghua University, Beijing, China
4 shared publications - Xiuzhen Guo
College of Control Science and Engineering, Zhejiang University, Hangzhou, China
4 shared publications
Latest Publications
- Open Access
- 3 November 2025
- Published by Association for Computing Machinery (ACM)
- p. 93-107
QuinID: Enabling FDMA-Based Fully Parallel RFID with Frequency-Selective Antenna
- 3 November 2025
- Published by Association for Computing Machinery (ACM)
- p. 93-107
Open AccessQuinID: Enabling FDMA-Based Fully Parallel RFID with Frequency-Selective Antenna
- 23 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Networking
- Vol. 33 (6) , 3132-3145
Analog Backscatter for Commodity WiFi With Payload Transparency
Backscatter is an enabling technology for battery-free sensing in today’s Artificial Intelligence of Things (AIOT). Building a backscatter sensing system, however, is a daunting task, due to two obstacles: the unaffordable power consumption of the microprocessor and the coexistence with the ambient carrier’s traffic. In order to address the issues, we present Leggiero, the first-of-its-kind analog WiFi backscatter with payload transparency, and its enhanced version, Leggiero+. A specially designed circuit based on the varactor diode directly converts fast-varying analog sensor signals into the RF (radio frequency) signal phase, eliminating the need for a microprocessor to interface between the radio and the sensor. By precisely locating the WiFi packet’s extra long training field (LTF) section and carefully designing the reference circuit, Leggiero embeds the analog phase into the channel state information (CSI). A commodity WiFi receiver without hardware modification can simultaneously decode the WiFi and the sensor data. We implement and evaluate Leggiero and Leggiero+ under varied settings. Results show the tag’s power consumption (excluding the power of the peripheral sensor module) is $30\mu $ W at a 400Hz sampling rate, $4.8\times $ and $4\times $ lower than the state-of-the-art WiFi backscatter schemes. Leggiero+ demonstrates enhanced throughput, communication range, and analog signal reproduction accuracy. Our design supports a variety of sensing applications, while maintaining the WiFi carrier’s throughput performance.
- 23 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Networking
- Vol. 33 (6) , 3132-3145
Analog Backscatter for Commodity WiFi With Payload Transparency
Backscatter is an enabling technology for battery-free sensing in today’s Artificial Intelligence of Things (AIOT). Building a backscatter sensing system, however, is a daunting task, due to two obstacles: the unaffordable power consumption of the microprocessor and the coexistence with the ambient carrier’s traffic. In order to address the issues, we present Leggiero, the first-of-its-kind analog WiFi backscatter with payload transparency, and its enhanced version, Leggiero+. A specially designed circuit based on the varactor diode directly converts fast-varying analog sensor signals into the RF (radio frequency) signal phase, eliminating the need for a microprocessor to interface between the radio and the sensor. By precisely locating the WiFi packet’s extra long training field (LTF) section and carefully designing the reference circuit, Leggiero embeds the analog phase into the channel state information (CSI). A commodity WiFi receiver without hardware modification can simultaneously decode the WiFi and the sensor data. We implement and evaluate Leggiero and Leggiero+ under varied settings. Results show the tag’s power consumption (excluding the power of the peripheral sensor module) is $30\mu $ W at a 400Hz sampling rate, $4.8\times $ and $4\times $ lower than the state-of-the-art WiFi backscatter schemes. Leggiero+ demonstrates enhanced throughput, communication range, and analog signal reproduction accuracy. Our design supports a variety of sensing applications, while maintaining the WiFi carrier’s throughput performance.
- Top Cited PapersOpen Access
- 4 April 2025
- Published by Association for Computing Machinery (ACM) in ACM Computing Surveys
- Vol. 57 (9) , 1-36
A Survey of mmWave Backscatter: Applications, Platforms, and Technologies
As a key enabling technology of the Internet of Things (IoT) and 5G communication networks, millimeter wave (mmWave) backscatter has undergone noteworthy advancements and brought significant improvement to prevailing sensing and communication systems. Past few years have witnessed growing efforts in innovating mmWave backscatter transmitters (e.g., tags and metasurfaces) and the corresponding techniques, which provide efficient information embedding and fine-grained signal manipulation for mmWave backscatter technologies. These efforts have greatly enabled a variety of appealing applications, such as long-range localization, roadside-to-vehicle communication, coverage optimization and large-scale identification. In this article, we carry out a comprehensive survey to systematically summarize the works related to the topic of mmWave backscatter. Firstly, we introduce the scope of this survey and provide a taxonomy to distinguish two categories of mmWave backscatter research based on the operating principle of the backscatter transmitter: modulation-based and relay-based. Furthermore, existing works in each category are grouped and introduced in detail, with their common applications, platforms and technologies, respectively. Finally, we elaborate on potential directions and discuss related surveys in this area.
- 4 April 2025
- Published by Association for Computing Machinery (ACM) in ACM Computing Surveys
- Vol. 57 (9) , 1-36
Top Cited PapersOpen AccessA Survey of mmWave Backscatter: Applications, Platforms, and Technologies
As a key enabling technology of the Internet of Things (IoT) and 5G communication networks, millimeter wave (mmWave) backscatter has undergone noteworthy advancements and brought significant improvement to prevailing sensing and communication systems. Past few years have witnessed growing efforts in innovating mmWave backscatter transmitters (e.g., tags and metasurfaces) and the corresponding techniques, which provide efficient information embedding and fine-grained signal manipulation for mmWave backscatter technologies. These efforts have greatly enabled a variety of appealing applications, such as long-range localization, roadside-to-vehicle communication, coverage optimization and large-scale identification. In this article, we carry out a comprehensive survey to systematically summarize the works related to the topic of mmWave backscatter. Firstly, we introduce the scope of this survey and provide a taxonomy to distinguish two categories of mmWave backscatter research based on the operating principle of the backscatter transmitter: modulation-based and relay-based. Furthermore, existing works in each category are grouped and introduced in detail, with their common applications, platforms and technologies, respectively. Finally, we elaborate on potential directions and discuss related surveys in this area.
- Open Access
mmHRR: Monitoring Heart Rate Recovery with Millimeter Wave Radar
Heart rate recovery (HRR) within the initial minute following exercise is a widely utilized metric for assessing cardiac autonomic function in individuals and predicting mortality risk in patients with cardiovascular disease. However, prevailing solutions for HRR monitoring typically involve the use of specialized medical equipment or contact wearable sensors, resulting in high costs and poor user experience. In this paper, we propose a contactless HRR monitoring technique, mmHRR, which achieves accurate heart rate (HR) estimation with a commercial mmWave radar. Unlike HR estimation at rest, the HR varies quickly after exercise and the heartbeat signal entangles with the respiration harmonics. To overcome these hurdles and effectively estimate the HR from the weak and non-stationary heartbeat signal, we propose a novel signal processing pipeline, including dynamic target tracking, adaptive heartbeat signal extraction, and accurate HR estimation with composite sliding windows. Real-world experiments demonstrate that mmHRR exhibits exceptional robustness across diverse environmental conditions, and achieves an average HR estimation error of 3.31 bpm (beats per minute), 71% lower than that of the state-of-the-art method.
Open AccessmmHRR: Monitoring Heart Rate Recovery with Millimeter Wave Radar
Heart rate recovery (HRR) within the initial minute following exercise is a widely utilized metric for assessing cardiac autonomic function in individuals and predicting mortality risk in patients with cardiovascular disease. However, prevailing solutions for HRR monitoring typically involve the use of specialized medical equipment or contact wearable sensors, resulting in high costs and poor user experience. In this paper, we propose a contactless HRR monitoring technique, mmHRR, which achieves accurate heart rate (HR) estimation with a commercial mmWave radar. Unlike HR estimation at rest, the HR varies quickly after exercise and the heartbeat signal entangles with the respiration harmonics. To overcome these hurdles and effectively estimate the HR from the weak and non-stationary heartbeat signal, we propose a novel signal processing pipeline, including dynamic target tracking, adaptive heartbeat signal extraction, and accurate HR estimation with composite sliding windows. Real-world experiments demonstrate that mmHRR exhibits exceptional robustness across diverse environmental conditions, and achieves an average HR estimation error of 3.31 bpm (beats per minute), 71% lower than that of the state-of-the-art method.
- 21 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Mobile Computing
- Vol. 24 (3) , 1684-1698
Real-Time Continuous Activity Recognition With a Commercial mmWave Radar
mmWave-based activity recognition technology has attracted widespread attention as it provides the ability of device-free, ubiquitous and accurate sensing. Recognition of human activities intrinsically demands to be real-time and continuous, but the state of the arts is still far limited with the capacity in this regard. The main obstacle lies in activity sequence segmentation, i.e., locating the boundaries between consecutive activities in an activity sequence. This is a daunting task, due to the unclear activity boundaries and the variable activity duration. In this paper, we propose ZuMa , the first mmWave-based approach to real-time continuous activity recognition. When resorting to a machine learning model for activity recognition, our insight is that the recognition confidence of the recognition model is highly correlated to the accuracy of activity sequence segmentation, so that the former can be utilized as a feedback metric to finely adjust the segmentation boundaries. Based on this insight, ZuMa is a coarse-to-fine grained approach, which includes the fast coarse-grained activity chunk extraction and the find-grained explicit segmentation adjustment and recognition. We have implemented ZuMa with the commercial mmWave radar and evaluated its performance under various settings. The results demonstrate that ZuMa achieves an average recognition error of 12.67%, which is 65.08% and 71.87% lower than that of the two baseline methods. The average recognition delay of ZuMa is only 1.86s.
- 21 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Mobile Computing
- Vol. 24 (3) , 1684-1698
Real-Time Continuous Activity Recognition With a Commercial mmWave Radar
mmWave-based activity recognition technology has attracted widespread attention as it provides the ability of device-free, ubiquitous and accurate sensing. Recognition of human activities intrinsically demands to be real-time and continuous, but the state of the arts is still far limited with the capacity in this regard. The main obstacle lies in activity sequence segmentation, i.e., locating the boundaries between consecutive activities in an activity sequence. This is a daunting task, due to the unclear activity boundaries and the variable activity duration. In this paper, we propose ZuMa , the first mmWave-based approach to real-time continuous activity recognition. When resorting to a machine learning model for activity recognition, our insight is that the recognition confidence of the recognition model is highly correlated to the accuracy of activity sequence segmentation, so that the former can be utilized as a feedback metric to finely adjust the segmentation boundaries. Based on this insight, ZuMa is a coarse-to-fine grained approach, which includes the fast coarse-grained activity chunk extraction and the find-grained explicit segmentation adjustment and recognition. We have implemented ZuMa with the commercial mmWave radar and evaluated its performance under various settings. The results demonstrate that ZuMa achieves an average recognition error of 12.67%, which is 65.08% and 71.87% lower than that of the two baseline methods. The average recognition delay of ZuMa is only 1.86s.
- 6 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Surveys & Tutorials
- Vol. 27 (3) , 1598-1617
Wireless Sensing for Material Identification: A Survey
As an application of fine-grained wireless sensing, RF-based material identification follows the paradigm of RF computing that fetches the information during RF signal propagation. Specifically, the RF signal accesses the objects’ material-related information and carries the information with its electromagnetic properties. With a variety of important applications, research on RF-based material identification has gained significant progress in recent years. However, several fundamental problems remain insufficiently studied, such as the sensing models, signal processing approaches, performance and future extensions. This paper presents the first comprehensive survey of RF-based material identification. According to the basic sensing model used for sensing, we propose a taxonomy to classify the existing works into two categories: reflection-based and penetration-based. The works in each category are further grouped by the type of RF signals used, with elaborated discussion of the detailed approaches and the common challenges. We provide a framework that benchmarks the performance of the existing works, followed by a thorough discussion of future extensions.
- 6 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Surveys & Tutorials
- Vol. 27 (3) , 1598-1617
Wireless Sensing for Material Identification: A Survey
As an application of fine-grained wireless sensing, RF-based material identification follows the paradigm of RF computing that fetches the information during RF signal propagation. Specifically, the RF signal accesses the objects’ material-related information and carries the information with its electromagnetic properties. With a variety of important applications, research on RF-based material identification has gained significant progress in recent years. However, several fundamental problems remain insufficiently studied, such as the sensing models, signal processing approaches, performance and future extensions. This paper presents the first comprehensive survey of RF-based material identification. According to the basic sensing model used for sensing, we propose a taxonomy to classify the existing works into two categories: reflection-based and penetration-based. The works in each category are further grouped by the type of RF signals used, with elaborated discussion of the detailed approaches and the common challenges. We provide a framework that benchmarks the performance of the existing works, followed by a thorough discussion of future extensions.
- Open Access
- 16 February 2024
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Sensor Networks
- Vol. 20 (2) , 1-22
Detection and Identification of Non-cooperative UAV Using a COTS mmWave Radar
Small Unmanned Aerial Vehicles (UAVs) are becoming potential threats to security-sensitive areas and personal privacy. A UAV can shoot photos at height, but how to detect such an uninvited intruder is an open problem. This article presents mmHawkeye, a passive approach for non-cooperative UAV detection and identification with a commercial off-the-shelf millimeter wave (mmWave) radar. mmHawkeye does not require prior knowledge of the type, motions, and flight trajectory of the UAV, while exploiting the signal feature induced by the UAV’s periodic micro-motion (PMM) for long-range accurate detection. The design is therefore effective in dealing with low signal-to-noise ratio and uncertain reflected signals from the UAV. After analyzing the theoretical model of the PMM feature, mmHawkeye can further track the UAV’s position containing range, azimuth and altitude angle with dynamic programming and particle filtering and then identify it with a Long Short-Term Memory–based detector. We implement mmHawkeye on a commercial mmWave radar and evaluate its performance under varied settings. The experimental results show that mmHawkeye has a detection accuracy of 95.8% and can realize detection at a range up to 80 m.
- 16 February 2024
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Sensor Networks
- Vol. 20 (2) , 1-22
Open AccessDetection and Identification of Non-cooperative UAV Using a COTS mmWave Radar
Small Unmanned Aerial Vehicles (UAVs) are becoming potential threats to security-sensitive areas and personal privacy. A UAV can shoot photos at height, but how to detect such an uninvited intruder is an open problem. This article presents mmHawkeye, a passive approach for non-cooperative UAV detection and identification with a commercial off-the-shelf millimeter wave (mmWave) radar. mmHawkeye does not require prior knowledge of the type, motions, and flight trajectory of the UAV, while exploiting the signal feature induced by the UAV’s periodic micro-motion (PMM) for long-range accurate detection. The design is therefore effective in dealing with low signal-to-noise ratio and uncertain reflected signals from the UAV. After analyzing the theoretical model of the PMM feature, mmHawkeye can further track the UAV’s position containing range, azimuth and altitude angle with dynamic programming and particle filtering and then identify it with a Long Short-Term Memory–based detector. We implement mmHawkeye on a commercial mmWave radar and evaluate its performance under varied settings. The experimental results show that mmHawkeye has a detection accuracy of 95.8% and can realize detection at a range up to 80 m.
- 28 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Mobile Computing
- Vol. 23 (6) , 7537-7551
Indoor Drone Localization and Tracking Based on Acoustic Inertial Measurement
We present Acoustic Inertial Measurement (AIM), a one-of-a-kind technique for indoor drone localization and tracking. Indoor drone localization and tracking are arguably a crucial, yet unsolved challenge: in GPS-denied environments, existing approaches enjoy limited applicability, especially in Non-Line of Sight (NLoS), require extensive environment instrumentation, or demand considerable hardware/software changes on drones. In contrast, AIM exploits the acoustic characteristics of the drones to estimate their location and derive their motion, even in NLoS settings. We tame location estimation errors using a dedicated Kalman filter and the Interquartile Range rule (IQR) and demonstrate that AIM can support indoor spaces with arbitrary ranges and layouts. We implement AIM using an off-the-shelf microphone array and evaluate its performance with a commercial drone under varied settings. Results indicate that the mean localization error of AIM is 46% lower than that of commercial UWB-based systems in a complex 10m×10m indoor scenario, where state-of-the-art infrared systems would not even work because of NLoS situations. When distributed microphone arrays are deployed, the mean error can be reduced to less than 0.5m in a 20m range, and even support spaces with arbitrary ranges and layouts.
- 28 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Mobile Computing
- Vol. 23 (6) , 7537-7551
Indoor Drone Localization and Tracking Based on Acoustic Inertial Measurement
We present Acoustic Inertial Measurement (AIM), a one-of-a-kind technique for indoor drone localization and tracking. Indoor drone localization and tracking are arguably a crucial, yet unsolved challenge: in GPS-denied environments, existing approaches enjoy limited applicability, especially in Non-Line of Sight (NLoS), require extensive environment instrumentation, or demand considerable hardware/software changes on drones. In contrast, AIM exploits the acoustic characteristics of the drones to estimate their location and derive their motion, even in NLoS settings. We tame location estimation errors using a dedicated Kalman filter and the Interquartile Range rule (IQR) and demonstrate that AIM can support indoor spaces with arbitrary ranges and layouts. We implement AIM using an off-the-shelf microphone array and evaluate its performance with a commercial drone under varied settings. Results indicate that the mean localization error of AIM is 46% lower than that of commercial UWB-based systems in a complex 10m×10m indoor scenario, where state-of-the-art infrared systems would not even work because of NLoS situations. When distributed microphone arrays are deployed, the mean error can be reduced to less than 0.5m in a 20m range, and even support spaces with arbitrary ranges and layouts.
- Open Access
mmHawkeye: Passive UAV Detection with a COTS mmWave Radar
Small Unmanned Aerial Vehicles (UAVs) are becoming potential threats to security-sensitive areas and personal privacy. A UAV can shoot photos at height, but how to detect such an uninvited intruder is an open problem. This paper presents mmHawkeye, a passive approach for UAV detection with a COTS millimeter wave (mmWave) radar. mmHawkeye doesn't require prior knowledge of the type, motions, and flight trajectory of the UAV, while exploiting the signal feature induced by the UAV's periodic micro-motion (PMM) for long-range accurate detection. The design is therefore effective in dealing with low-SNR and uncertain reflected signals from the UAV. mmHawkeye can further track the UAV's position with dynamic programming and particle filtering, and identify it with a Long Short-Term Memory (LSTM) based detector. We implement mmHawkeye on a commercial mmWave radar and evaluate its performance under varied settings. The experimental results show that mmHawkeye has a detection accuracy of 95.8% and can realize detection at a range up to 80m.
Open AccessmmHawkeye: Passive UAV Detection with a COTS mmWave Radar
Small Unmanned Aerial Vehicles (UAVs) are becoming potential threats to security-sensitive areas and personal privacy. A UAV can shoot photos at height, but how to detect such an uninvited intruder is an open problem. This paper presents mmHawkeye, a passive approach for UAV detection with a COTS millimeter wave (mmWave) radar. mmHawkeye doesn't require prior knowledge of the type, motions, and flight trajectory of the UAV, while exploiting the signal feature induced by the UAV's periodic micro-motion (PMM) for long-range accurate detection. The design is therefore effective in dealing with low-SNR and uncertain reflected signals from the UAV. mmHawkeye can further track the UAV's position with dynamic programming and particle filtering, and identify it with a Long Short-Term Memory (LSTM) based detector. We implement mmHawkeye on a commercial mmWave radar and evaluate its performance under varied settings. The experimental results show that mmHawkeye has a detection accuracy of 95.8% and can realize detection at a range up to 80m.
- Top Cited Papers
- 25 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Surveys & Tutorials
- Vol. 25 (4) , 2052-2087
A Survey of mmWave-Based Human Sensing: Technology, Platforms and Applications
With the rapid development of the Internet of Things (IoT) and the rise of 5G communication networks and automatic driving, millimeter wave (mmWave) sensing is emerging and starts impacting our life and workspace. mmWave sensing can sense humans and objects in a contactless way, providing fine-grained sensing ability. In the past few years, many mmWave sensing techniques have been proposed and applied in various human sensing applications (e.g., human localization, gesture recognition, and vital monitoring). We discover the need of a comprehensive survey to summarize the technology, platforms and applications of mmWave-based human sensing. In this survey, we first present the mmWave hardware platforms and some key techniques of mmWave sensing. We then provide a comprehensive review of existing mmWave-based human sensing works. Specifically, we divide existing works into four categories according to the sensing granularity: human tracking and localization, motion recognition, biometric measurement and human imaging. Finally, we discuss the potential research challenges and present future directions in this area.
- 25 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Surveys & Tutorials
- Vol. 25 (4) , 2052-2087
Top Cited PapersA Survey of mmWave-Based Human Sensing: Technology, Platforms and Applications
With the rapid development of the Internet of Things (IoT) and the rise of 5G communication networks and automatic driving, millimeter wave (mmWave) sensing is emerging and starts impacting our life and workspace. mmWave sensing can sense humans and objects in a contactless way, providing fine-grained sensing ability. In the past few years, many mmWave sensing techniques have been proposed and applied in various human sensing applications (e.g., human localization, gesture recognition, and vital monitoring). We discover the need of a comprehensive survey to summarize the technology, platforms and applications of mmWave-based human sensing. In this survey, we first present the mmWave hardware platforms and some key techniques of mmWave sensing. We then provide a comprehensive review of existing mmWave-based human sensing works. Specifically, we divide existing works into four categories according to the sensing granularity: human tracking and localization, motion recognition, biometric measurement and human imaging. Finally, we discuss the potential research challenges and present future directions in this area.