Arunava Ray
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Arunava Ray has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Rajesh Rai
Department of Mining Engineering, Indian Institute of Technology (BHU), Varanasi, India
7 shared publications - Manoj Khandelwal
Institute of Innovation, Science and Sustainability, Federation University Australia, Ballarat, VIC 3350, Australia
4 shared publications - K. Gayathridevi
Vellore Institute of Technology
3 shared publications - Trilok Nath Singh
Indian Institute of Technology Patna
3 shared publications K. Gayathridevi
2 shared publications- Ashok Jaiswal
Department of Mining Engineering, IIT(BHU), Varanasi, India
1 shared publication
Latest Publications
- Open Access
- 10 November 2026
- Published by Taylor & Francis in Geomatics, Natural Hazards and Risk
- Vol. 17 (1)
Antecedent rainfall effects on the stability of soil‒rock mixture slopes: influence of matrix type and volumetric block proportion
- 10 November 2026
- Published by Taylor & Francis in Geomatics, Natural Hazards and Risk
- Vol. 17 (1)
Open AccessAntecedent rainfall effects on the stability of soil‒rock mixture slopes: influence of matrix type and volumetric block proportion
- Open Access
- 30 March 2026
- Published by Taylor & Francis in Geomatics, Natural Hazards and Risk
- Vol. 17 (1)
Seismic slope stability: a detailed review of recent advances in fundamental science, modelling and mitigation strategies
- 30 March 2026
- Published by Taylor & Francis in Geomatics, Natural Hazards and Risk
- Vol. 17 (1)
Open AccessSeismic slope stability: a detailed review of recent advances in fundamental science, modelling and mitigation strategies
- Open Access
- 1 January 2026
- Published by Wiley in Advances in Civil Engineering
- Vol. 2026 (1)
Permeability Prediction of Soil–Rock Mixtures Using Hybrid Machine Learning Considering Matrix Composition and Rock Content
Soil–rock mixtures (SRMs) are heterogeneous geomaterials commonly encountered in geotechnical structures such as dams, slopes, and tunnels. Due to the complex interaction between fine‐grained soil matrices and coarse rock fragments, predicting the hydraulic behavior of SRMs, particularly permeability, remains a significant challenge. This study investigates the influence of different matrix compositions, namely, loamy sand, sandy loam, and silty loam, on the permeability behavior of SRMs under varying volumetric block proportions (VBPs), rock sizes (RSs), rock shapes (RSHs), and moisture conditions. Large‐scale constant‐head permeability tests were conducted on remolded SRM specimens prepared with different matrix types (MTs) and block characteristics. Experimental results indicated that permeability increases under dry optimum conditions and decreases under wet optimum conditions due to changes in pore structure and particle arrangement. Higher VBPs generally increased permeability, while larger RSs reduced flow due to increased tortuosity. To predict permeability, hybrid machine learning (ML) models combining random forest (RF) and extreme gradient boosting (XGB) with Leopard Seal (LS) and Egret Swarm (EG) optimization algorithms were developed and validated using fivefold cross‐validation. Among the developed models, the XGB‐EG hybrid model achieved the best predictive performance on the testing dataset with R 2 = 0.988798, root mean square error (RMSE) = 0.027068, mean absolute error (MAE) = 0.01481, and relative standard error (RSR) = 0.105839. SHAP (SHapley Additive exPlanations) analysis further identified VBP as the most influential parameter affecting permeability prediction. The findings demonstrate the importance of matrix composition in governing SRM hydraulic behavior and highlight the capability of hybrid ML approaches for reliable permeability prediction in heterogeneous geomaterials.
- 1 January 2026
- Published by Wiley in Advances in Civil Engineering
- Vol. 2026 (1)
Open AccessPermeability Prediction of Soil–Rock Mixtures Using Hybrid Machine Learning Considering Matrix Composition and Rock Content
Soil–rock mixtures (SRMs) are heterogeneous geomaterials commonly encountered in geotechnical structures such as dams, slopes, and tunnels. Due to the complex interaction between fine‐grained soil matrices and coarse rock fragments, predicting the hydraulic behavior of SRMs, particularly permeability, remains a significant challenge. This study investigates the influence of different matrix compositions, namely, loamy sand, sandy loam, and silty loam, on the permeability behavior of SRMs under varying volumetric block proportions (VBPs), rock sizes (RSs), rock shapes (RSHs), and moisture conditions. Large‐scale constant‐head permeability tests were conducted on remolded SRM specimens prepared with different matrix types (MTs) and block characteristics. Experimental results indicated that permeability increases under dry optimum conditions and decreases under wet optimum conditions due to changes in pore structure and particle arrangement. Higher VBPs generally increased permeability, while larger RSs reduced flow due to increased tortuosity. To predict permeability, hybrid machine learning (ML) models combining random forest (RF) and extreme gradient boosting (XGB) with Leopard Seal (LS) and Egret Swarm (EG) optimization algorithms were developed and validated using fivefold cross‐validation. Among the developed models, the XGB‐EG hybrid model achieved the best predictive performance on the testing dataset with R 2 = 0.988798, root mean square error (RMSE) = 0.027068, mean absolute error (MAE) = 0.01481, and relative standard error (RSR) = 0.105839. SHAP (SHapley Additive exPlanations) analysis further identified VBP as the most influential parameter affecting permeability prediction. The findings demonstrate the importance of matrix composition in governing SRM hydraulic behavior and highlight the capability of hybrid ML approaches for reliable permeability prediction in heterogeneous geomaterials.
- 25 October 2025
- Published by Springer Nature
- p. 15-29
Laboratory Study of the Strength and Hydraulic Behaviour of Bimsoil Under Varying Block Properties and Matrix Types
- 25 October 2025
- Published by Springer Nature
- p. 15-29
Laboratory Study of the Strength and Hydraulic Behaviour of Bimsoil Under Varying Block Properties and Matrix Types
- Open Access
- 30 August 2025
- Published by Springer Nature in International Journal of Geo-Engineering
- Vol. 16 (1) , 1-22
Influence of block shape and size distribution on bimslope stability: a numerical investigation of static and seismic behavior
Geomaterials with block-in-matrix textures are complex, heterogeneous materials. The behaviour of this Soil-Rock Mixture under external loading differs significantly from that of pure rock or soil. As a result, executing engineering projects on these materials can be quite challenging. To ensure safety and stability, it is essential to assess the mechanical properties of the Soil-Rock Mixture, including block proportion, size, shape, orientation, and soil-rock interaction. This study employed numerical simulations using Finite Element Method analysis in RocScience RS2 software to assess the safety factor of the slopes made up of Soil-Rock Mixture, or commonly known as Bimslope. The analysis included variation in the percentages of volumetric block proportions and block sizes, derived from statistical analysis, to effectively represent the distribution of blocks in the field. Simulations were conducted under both static and seismic loading conditions, resulting in a comprehensive evaluation of the Bimslope’s stability. The results indicated that when the slope consists of a combination of different block shapes, the safety factor increases due to the formation of a tortuous failure surface, which is more stable than a slope having uniform shape blocks. The angular shape of blocks improves interlocking, which leads to a more effective failure surface that requires more energy to shear through. This increased interlocking and high interface friction enhance the overall shear strength and stability of the slope. Additionally, it was found that if the blocks are located at the upper portion of the slope and are aligned parallel to the slope angle, they are more susceptible to sliding off. Under seismic loading conditions, most slopes were found to be unsafe, except for those with a higher proportion of smaller blocks.
- 30 August 2025
- Published by Springer Nature in International Journal of Geo-Engineering
- Vol. 16 (1) , 1-22
Open AccessInfluence of block shape and size distribution on bimslope stability: a numerical investigation of static and seismic behavior
Geomaterials with block-in-matrix textures are complex, heterogeneous materials. The behaviour of this Soil-Rock Mixture under external loading differs significantly from that of pure rock or soil. As a result, executing engineering projects on these materials can be quite challenging. To ensure safety and stability, it is essential to assess the mechanical properties of the Soil-Rock Mixture, including block proportion, size, shape, orientation, and soil-rock interaction. This study employed numerical simulations using Finite Element Method analysis in RocScience RS2 software to assess the safety factor of the slopes made up of Soil-Rock Mixture, or commonly known as Bimslope. The analysis included variation in the percentages of volumetric block proportions and block sizes, derived from statistical analysis, to effectively represent the distribution of blocks in the field. Simulations were conducted under both static and seismic loading conditions, resulting in a comprehensive evaluation of the Bimslope’s stability. The results indicated that when the slope consists of a combination of different block shapes, the safety factor increases due to the formation of a tortuous failure surface, which is more stable than a slope having uniform shape blocks. The angular shape of blocks improves interlocking, which leads to a more effective failure surface that requires more energy to shear through. This increased interlocking and high interface friction enhance the overall shear strength and stability of the slope. Additionally, it was found that if the blocks are located at the upper portion of the slope and are aligned parallel to the slope angle, they are more susceptible to sliding off. Under seismic loading conditions, most slopes were found to be unsafe, except for those with a higher proportion of smaller blocks.
- Open Access
- 5 March 2025
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 49 (5) , 5117-5160
Geotechnical Challenges in Slope Stability: Experimental Investigation of Coconut Fiber Reinforcement Under Seismic Loading
Geotechnical challenges in contemporary engineering necessitate the construction of structures on poor soils and vulnerable slopes due to limited land availability. The stability of soil slopes under seismic conditions is crucial for designing safe infrastructures. Conventional slope reinforcement techniques, such as geosynthetics, are effective but costly. This study explores the use of coconut fibers as a cost-effective, temporary reinforcement for improving slope stability under seismic loading. The research involved horizontal and vertical shake table tests on slopes of varying heights and angles, both with and without surcharge loads. Coconut fibers were mixed into the soil at different percentages to assess their effectiveness in reducing displacements and settlements during seismic events. Linear Variable Differential Transformers (LVDTs) measured displacements at various heights on the slopes. Results indicate that slopes reinforced with coconut fibers exhibit significantly reduced vertical and horizontal displacements compared to unreinforced slopes under both vertical and horizontal seismic loading. The reinforced slopes showed improved stability, particularly under higher surcharge loads and increased shaking frequencies. This study demonstrates that coconut fibers can serve as an effective, eco-friendly reinforcement method for temporary slope stabilization, offering a sustainable alternative to synthetic materials. The findings contribute to the broader understanding of natural fiber applications in geotechnical engineering, especially for regions prone to seismic activities.
- 5 March 2025
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 49 (5) , 5117-5160
Open AccessGeotechnical Challenges in Slope Stability: Experimental Investigation of Coconut Fiber Reinforcement Under Seismic Loading
Geotechnical challenges in contemporary engineering necessitate the construction of structures on poor soils and vulnerable slopes due to limited land availability. The stability of soil slopes under seismic conditions is crucial for designing safe infrastructures. Conventional slope reinforcement techniques, such as geosynthetics, are effective but costly. This study explores the use of coconut fibers as a cost-effective, temporary reinforcement for improving slope stability under seismic loading. The research involved horizontal and vertical shake table tests on slopes of varying heights and angles, both with and without surcharge loads. Coconut fibers were mixed into the soil at different percentages to assess their effectiveness in reducing displacements and settlements during seismic events. Linear Variable Differential Transformers (LVDTs) measured displacements at various heights on the slopes. Results indicate that slopes reinforced with coconut fibers exhibit significantly reduced vertical and horizontal displacements compared to unreinforced slopes under both vertical and horizontal seismic loading. The reinforced slopes showed improved stability, particularly under higher surcharge loads and increased shaking frequencies. This study demonstrates that coconut fibers can serve as an effective, eco-friendly reinforcement method for temporary slope stabilization, offering a sustainable alternative to synthetic materials. The findings contribute to the broader understanding of natural fiber applications in geotechnical engineering, especially for regions prone to seismic activities.
- Open Access
- 10 February 2025
- Published by Springer Nature in Natural Hazards
- Vol. 121 (8) , 8995-9020
Stability analysis and prediction of Bimslope failures using numerical modelling and hybrid meta-heuristic models
Bimsoil slope (Bimslope) or Soil-Rock-Mixture slopes are complex geological formations made up of geotechnically important ‘blocks’ enclosed in a finer-textured ‘matrix.’ These geomaterials possess heterogeneous properties owing to changes in the block and matrix properties that can arise from natural weathering processes or various anthropogenic activities. The present study focuses on the stability analysis of a Bimslope under varying block properties (orientation and volumetric block proportion), matrix type (Loamy sand, Sandy loam, and Silt loam) and matrix water content. The study indicates that the failure of a Bimslope is not governed by only one physical parameter but rather by a critical combination of block properties, matrix type and matrix water content. When the water content (< 25% saturation) and block content (< 25%) are less, the failure is governed by matrix only. With the increase in block content, the failure is governed by block however under fully saturated (100% saturation) conditions, the failure is solely governed by matrix type irrespective of block properties. In addition to that, the data generated using numerical analysis was used to predict the factor of safety using hybridized ensembled methods considering the XGB model and three other novel meta-heuristic algorithms (MHA): political optimization (POA), the Leopard Seal algorithm (LSA), and the Giant Armadillo Algorithm (GAA). It has been found that among all the models, the GAA-XGB algorithm exhibits better results with R2 and RMSE values as 0.99628, 0.055436 in training and 0.985664, 0.063092 in the testing stage. Furthermore, SHAP-based analysis has been performed to identify the most influential parameters.
- 10 February 2025
- Published by Springer Nature in Natural Hazards
- Vol. 121 (8) , 8995-9020
Open AccessStability analysis and prediction of Bimslope failures using numerical modelling and hybrid meta-heuristic models
Bimsoil slope (Bimslope) or Soil-Rock-Mixture slopes are complex geological formations made up of geotechnically important ‘blocks’ enclosed in a finer-textured ‘matrix.’ These geomaterials possess heterogeneous properties owing to changes in the block and matrix properties that can arise from natural weathering processes or various anthropogenic activities. The present study focuses on the stability analysis of a Bimslope under varying block properties (orientation and volumetric block proportion), matrix type (Loamy sand, Sandy loam, and Silt loam) and matrix water content. The study indicates that the failure of a Bimslope is not governed by only one physical parameter but rather by a critical combination of block properties, matrix type and matrix water content. When the water content (< 25% saturation) and block content (< 25%) are less, the failure is governed by matrix only. With the increase in block content, the failure is governed by block however under fully saturated (100% saturation) conditions, the failure is solely governed by matrix type irrespective of block properties. In addition to that, the data generated using numerical analysis was used to predict the factor of safety using hybridized ensembled methods considering the XGB model and three other novel meta-heuristic algorithms (MHA): political optimization (POA), the Leopard Seal algorithm (LSA), and the Giant Armadillo Algorithm (GAA). It has been found that among all the models, the GAA-XGB algorithm exhibits better results with R2 and RMSE values as 0.99628, 0.055436 in training and 0.985664, 0.063092 in the testing stage. Furthermore, SHAP-based analysis has been performed to identify the most influential parameters.
- 3 September 2024
- Published by Springer Nature in Sādhanā
- Vol. 49 (3) , 1-15
Numerical study of the effect of overburden pressure on the stability of mine dump slope
- 3 September 2024
- Published by Springer Nature in Sādhanā
- Vol. 49 (3) , 1-15
Numerical study of the effect of overburden pressure on the stability of mine dump slope
- 13 August 2024
- Published by Springer Nature in Indian Geotechnical Journal
- Vol. 55 (3) , 1779-1794
Mechanical Characterization of Soil–Rock Mixture Under Varying Block Parameters, Matrix Properties and Matrix Water Content Using Destructive and Non-Destructive Testing
- 13 August 2024
- Published by Springer Nature in Indian Geotechnical Journal
- Vol. 55 (3) , 1779-1794
Mechanical Characterization of Soil–Rock Mixture Under Varying Block Parameters, Matrix Properties and Matrix Water Content Using Destructive and Non-Destructive Testing