Xiaosheng Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiaosheng Zhou has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
Guodong Li
Shanxi Key Laboratory of Intelligent Equipment Technology in Harsh Environment, North University of China , Taiyuan , 030051 , PR China
2 shared publicationsDong Zhang
Shanxi Key Laboratory of Intelligent Equipment Technology in Harsh Environment, North University of China , Taiyuan , 030051 , PR China
1 shared publicationHuang Zhang
Shanxi Key Laboratory of Intelligent Equipment Technology in Harsh Environment, School of Mechanical Engineering, North University of China, Taiyuan, China
1 shared publicationLi Zhang
School of Mechanical Engineering, North University of China , Taiyuan , 030051 , PR China
1 shared publicationMeini Yuan
College of Mechatronic Engineering, North University of China, Taiyuan, China
1 shared publication- Rui Bai
Department of Mechanical Engineering, Taiyuan Institute of Technology, Taiyuan 030008, China
1 shared publication
Latest Publications
- Open Access
Effect of Intercritical Quenching Temperature on Microstructure and Mechanical Performance of Cr-Ni-Mo-V Steel with Banded Structure
The effects of intercritical quenching on the microstructure evolution and mechanical performance of Cr–Ni–Mo–V steel with a banded structure are studied. It is found that the intercritical quenching temperature has a significant effect on the morphology, distribution, and relative amount of ferrite/martensite, as well as the carbide precipitates upon tempering treatment. It is indicated that owing to the initial banded structure of Cr-Ni-Mo-V steel, the ferrite formation in intercritical heat treatment also exhibits a banded distribution. With the increase in quenching temperature, the proportion of ferrite in the Cr-Ni-Mo-V steel decreases from 30 ± 3.2 vol.% to 18 ± 2.8 vol.%. Tempering treatment has no significant effect on the distribution characteristics of ferrite, but it promotes the recovery of martensite laths and the precipitation of carbides. The mechanical properties of Cr-Ni-Mo-V steel are determined by both the changes in ferrite content induced by intercritical quenching and the evolution of carbide types during tempering. Delamination cracks are observed on the fracture surface, which is attributed to the lamellar microstructure, improving the plasticity of Cr-Ni-Mo-V steel through stress dispersion and a multi-stage energy absorption mechanism.
Open AccessEffect of Intercritical Quenching Temperature on Microstructure and Mechanical Performance of Cr-Ni-Mo-V Steel with Banded Structure
The effects of intercritical quenching on the microstructure evolution and mechanical performance of Cr–Ni–Mo–V steel with a banded structure are studied. It is found that the intercritical quenching temperature has a significant effect on the morphology, distribution, and relative amount of ferrite/martensite, as well as the carbide precipitates upon tempering treatment. It is indicated that owing to the initial banded structure of Cr-Ni-Mo-V steel, the ferrite formation in intercritical heat treatment also exhibits a banded distribution. With the increase in quenching temperature, the proportion of ferrite in the Cr-Ni-Mo-V steel decreases from 30 ± 3.2 vol.% to 18 ± 2.8 vol.%. Tempering treatment has no significant effect on the distribution characteristics of ferrite, but it promotes the recovery of martensite laths and the precipitation of carbides. The mechanical properties of Cr-Ni-Mo-V steel are determined by both the changes in ferrite content induced by intercritical quenching and the evolution of carbide types during tempering. Delamination cracks are observed on the fracture surface, which is attributed to the lamellar microstructure, improving the plasticity of Cr-Ni-Mo-V steel through stress dispersion and a multi-stage energy absorption mechanism.
- Open Access
- 1 January 2024
- Published by Walter de Gruyter GmbH in High Temperature Materials and Processes
- Vol. 43 (1)
Dynamic evolution of residual stress upon manufacturing Al-based diesel engine diaphragm
As a thin-walled complex structure, the manufacturing of Al-based diesel engine diaphragms involves casting and heat treatment. Residual stress is introduced during the uneven temperature field in casting and heat treatment, as well as the plastic deformation and cutting heat during mechanical processing. This research investigates the evolution and accumulation models of residual stress in casting and heat treatment for Al-based diesel engine diaphragms using ProCAST and ABAQUS software, combining with the experimental tests. To mitigate residual stress, the optimal parameter combination for casting temperature, knockout temperature, and mold preheating temperature in casting process is explored. The results indicate that the knockout temperature has the most significant influence on casting residual stress, and mold preheating is beneficial for reducing residual stress. Despite improvements, some internal stress concentration areas persist on the knockout casting surface. Furthermore, T6 heat treatment proves to be effective in eliminating more than 50% of the residual stress.
- 1 January 2024
- Published by Walter de Gruyter GmbH in High Temperature Materials and Processes
- Vol. 43 (1)
Open AccessDynamic evolution of residual stress upon manufacturing Al-based diesel engine diaphragm
As a thin-walled complex structure, the manufacturing of Al-based diesel engine diaphragms involves casting and heat treatment. Residual stress is introduced during the uneven temperature field in casting and heat treatment, as well as the plastic deformation and cutting heat during mechanical processing. This research investigates the evolution and accumulation models of residual stress in casting and heat treatment for Al-based diesel engine diaphragms using ProCAST and ABAQUS software, combining with the experimental tests. To mitigate residual stress, the optimal parameter combination for casting temperature, knockout temperature, and mold preheating temperature in casting process is explored. The results indicate that the knockout temperature has the most significant influence on casting residual stress, and mold preheating is beneficial for reducing residual stress. Despite improvements, some internal stress concentration areas persist on the knockout casting surface. Furthermore, T6 heat treatment proves to be effective in eliminating more than 50% of the residual stress.
- 24 June 2023
- Published by Springer Nature in Metals and Materials International
- Vol. 30 (1) , 182-193
Dependency of Portevin-LeChatelier Effect and Microstructure Characteristics of 9Cr ODS Steels on Strain Rates Upon Hot Deformation
- 24 June 2023
- Published by Springer Nature in Metals and Materials International
- Vol. 30 (1) , 182-193
Dependency of Portevin-LeChatelier Effect and Microstructure Characteristics of 9Cr ODS Steels on Strain Rates Upon Hot Deformation