Nassar N. Asemi
Research Subjects
Nassar N. Asemi has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Mohammad Saleh AlSalhi
Department of Physics and Astronomy, College of Science, King Saud University, Riyadh, Saudi Arabia
3 shared publications Hamoud Kassim
2 shared publicationsSaad Aldawood
2 shared publications- Sandhanasamy Devanesan
Department of Zoology, College of Science King Saud University Riyadh Saudi Arabia
2 shared publications Abdel-Basit Al-Odayni
1 shared publicationAbdulaziz AlSalhi
Department of Dermatology, College of Medicine, King Saud University, P.O. Box: 7361, Riyadh, 11451, Saudi Arabia
1 shared publication
Latest Publications
- Open Access
High-Entropy Alloys, Carbides, and Oxides for Lead-Free Radiation Shielding: A Critical Review
High-entropy materials, which combine four or more principal elements in one phase, can hold high-atomic-number species for photon attenuation, strong neutron absorbers, and light or load-bearing elements in a single, chemically stable solid, which makes them candidates for multifunctional radiation shields. This review examines high-entropy alloys, carbides, and oxides as radiation-attenuating media, a role distinct from irradiation tolerance and not previously consolidated, and benchmarks them against lead and lead-free incumbents, separating computed from measured values. Between about 1 and 4 MeV, the mass attenuation coefficient varies little with composition, hydrogen apart, so density governs per-thickness performance and matching lead needs about 12 g cm−3; at 0.1–0.2 MeV diluted refractory chemistries need 18–22 g cm−3. The only fabricated tungsten-bearing alloy that states its density, Ta-Ti-V-W at 11.63 g cm−3, reaches 96% of lead’s linear attenuation at 1.25 MeV and 85% at 0.662 MeV, below tungsten, its heavy alloys, and tungsten carbide. High-entropy oxide fillers do not out-attenuate Bi2O3 per unit mass but combine photon attenuation with gadolinium capture in one phase. Of 39 studies, 21 measure attenuation, one measures lead in the same setup, and none measures charged-particle shielding. The review contributes a minimum reporting standard, a composition-level design framework, and a data-driven design workflow.
Open AccessHigh-Entropy Alloys, Carbides, and Oxides for Lead-Free Radiation Shielding: A Critical Review
High-entropy materials, which combine four or more principal elements in one phase, can hold high-atomic-number species for photon attenuation, strong neutron absorbers, and light or load-bearing elements in a single, chemically stable solid, which makes them candidates for multifunctional radiation shields. This review examines high-entropy alloys, carbides, and oxides as radiation-attenuating media, a role distinct from irradiation tolerance and not previously consolidated, and benchmarks them against lead and lead-free incumbents, separating computed from measured values. Between about 1 and 4 MeV, the mass attenuation coefficient varies little with composition, hydrogen apart, so density governs per-thickness performance and matching lead needs about 12 g cm−3; at 0.1–0.2 MeV diluted refractory chemistries need 18–22 g cm−3. The only fabricated tungsten-bearing alloy that states its density, Ta-Ti-V-W at 11.63 g cm−3, reaches 96% of lead’s linear attenuation at 1.25 MeV and 85% at 0.662 MeV, below tungsten, its heavy alloys, and tungsten carbide. High-entropy oxide fillers do not out-attenuate Bi2O3 per unit mass but combine photon attenuation with gadolinium capture in one phase. Of 39 studies, 21 measure attenuation, one measures lead in the same setup, and none measures charged-particle shielding. The review contributes a minimum reporting standard, a composition-level design framework, and a data-driven design workflow.
- Top Cited PapersOpen Access
Hybrid Phy-X/PSD–Geant4 Assessment of Gamma and Neutron Shielding in Lead-Free HDPE Composites Reinforced with High-Z Oxides
This study evaluates lead-free high-density polyethylene (HDPE) composites reinforced with high-Z oxides (Bi2O3, WO3, Gd2O3, TeO2, and a Bi2O3/WO3 hybrid) as lightweight materials for gamma-ray and fast-neutron shielding. A hybrid computational framework combining Phy-X/PSD with Geant4 Monte Carlo simulations was used to obtain key shielding parameters, including the linear and mass attenuation coefficients (μ, μ/ρ), half-value layer (HVL), mean free path (MFP), effective atomic number (Zeff), effective electron density (Neff), exposure and energy-absorption buildup factors (EBF, EABF), and fast-neutron removal cross section (ΣR). The incorporation of heavy oxides produced a pronounced improvement in gamma-ray attenuation, particularly at low energies, where the linear attenuation coefficient increased from below 1 cm−1 for neat HDPE to values exceeding 130–150 cm−1 for Bi- and W-rich composites. In the intermediate Compton-scattering region (≈0.3–1 MeV), all oxide-reinforced systems maintained a clear attenuation advantage, with μ values around 0.12–0.13 cm−1 compared with ≈0.07 cm−1 for pure HDPE. At higher photon energies, the dense composites continued to outperform the polymer matrix, yielding μ values of approximately 0.07–0.09 cm−1 versus ≈0.02 cm−1 for HDPE due to enhanced pair-production interactions. The Bi2O3/WO3 hybrid composite exhibited attenuation behavior comparable, and in some regions slightly exceeding, that of the single-oxide systems, indicating that mixed fillers can effectively balance density and shielding efficiency. Oxide addition significantly reduced exposure and energy-absorption buildup factors below 1 MeV, with a moderate increase at higher energies associated with secondary radiation processes. Fast-neutron removal cross sections were also modestly enhanced, with Gd2O3-containing composites showing the highest values due to the combined effects of hydrogen moderation and neutron capture. The close agreement between Phy-X/PSD and Geant4 results confirms the reliability of the dual-method approach. Overall, HDPE composites containing about 60 wt.% oxide filler offer a practical compromise between shielding performance, manufacturability, and environmental safety, making them promising candidates for medical, nuclear, and aerospace radiation-protection applications.
Top Cited PapersOpen AccessHybrid Phy-X/PSD–Geant4 Assessment of Gamma and Neutron Shielding in Lead-Free HDPE Composites Reinforced with High-Z Oxides
This study evaluates lead-free high-density polyethylene (HDPE) composites reinforced with high-Z oxides (Bi2O3, WO3, Gd2O3, TeO2, and a Bi2O3/WO3 hybrid) as lightweight materials for gamma-ray and fast-neutron shielding. A hybrid computational framework combining Phy-X/PSD with Geant4 Monte Carlo simulations was used to obtain key shielding parameters, including the linear and mass attenuation coefficients (μ, μ/ρ), half-value layer (HVL), mean free path (MFP), effective atomic number (Zeff), effective electron density (Neff), exposure and energy-absorption buildup factors (EBF, EABF), and fast-neutron removal cross section (ΣR). The incorporation of heavy oxides produced a pronounced improvement in gamma-ray attenuation, particularly at low energies, where the linear attenuation coefficient increased from below 1 cm−1 for neat HDPE to values exceeding 130–150 cm−1 for Bi- and W-rich composites. In the intermediate Compton-scattering region (≈0.3–1 MeV), all oxide-reinforced systems maintained a clear attenuation advantage, with μ values around 0.12–0.13 cm−1 compared with ≈0.07 cm−1 for pure HDPE. At higher photon energies, the dense composites continued to outperform the polymer matrix, yielding μ values of approximately 0.07–0.09 cm−1 versus ≈0.02 cm−1 for HDPE due to enhanced pair-production interactions. The Bi2O3/WO3 hybrid composite exhibited attenuation behavior comparable, and in some regions slightly exceeding, that of the single-oxide systems, indicating that mixed fillers can effectively balance density and shielding efficiency. Oxide addition significantly reduced exposure and energy-absorption buildup factors below 1 MeV, with a moderate increase at higher energies associated with secondary radiation processes. Fast-neutron removal cross sections were also modestly enhanced, with Gd2O3-containing composites showing the highest values due to the combined effects of hydrogen moderation and neutron capture. The close agreement between Phy-X/PSD and Geant4 results confirms the reliability of the dual-method approach. Overall, HDPE composites containing about 60 wt.% oxide filler offer a practical compromise between shielding performance, manufacturability, and environmental safety, making them promising candidates for medical, nuclear, and aerospace radiation-protection applications.
- Open Access
- 27 June 2025
- Published by Elsevier in Journal of Radiation Research and Applied Sciences
- Vol. 18 (3)
Enhanced gamma-ray shielding with high-density Bi2O3-Infused PTFE: Insights from Phy-X/PSD and Geant4 Monte Carlo simulations
- 27 June 2025
- Published by Elsevier in Journal of Radiation Research and Applied Sciences
- Vol. 18 (3)
Open AccessEnhanced gamma-ray shielding with high-density Bi2O3-Infused PTFE: Insights from Phy-X/PSD and Geant4 Monte Carlo simulations
- Open Access
- 21 October 2024
- Published by Elsevier in Journal of Radiation Research and Applied Sciences
- Vol. 17 (4)
Advancing gamma radiation shielding with Bitumen-WO₃ composite materials
- 21 October 2024
- Published by Elsevier in Journal of Radiation Research and Applied Sciences
- Vol. 17 (4)
Open AccessAdvancing gamma radiation shielding with Bitumen-WO₃ composite materials
- 26 January 2024
- Published by Wiley in Luminescence
- Vol. 39 (1) , e4681
Synthesis, thermoluminescence characterizations, and photon attenuation parameters of MgAl2O4 structure doped with different ions
In this work, different ion co‐doped Mg1‐xAl2O4 nanophosphors, coded as M5Cr‐5LaA, M5Cr‐5CuA, M0.07Si‐0.03CeA, and M0.05Ti‐0.05LaA, where 5Cr‐5La, 5Cr‐5Cu, 0.07Si‐0.03Ce, and 0.05Ti‐0.05La representing the added ions (mol%), were prepared using the sol–gel method. Phase structure, transmission electron microscope (TEM) images, and element feasibility were checked using X‐ray diffraction, TEM analysis, and energy dispersive X‐ray (EDX) spectroscopy. Their thermoluminescence (TL) response was checked using a 5 Gy γ‐test dose. The M0.05Ti‐0.05LaA sample was found to be best for the TL response with an ~1.1 times response compared with that of the MTS‐700 commercial detector. A wide range of dose–responses for the M0.05Ti‐0.05LaA sample was found up to a 20 Gy γ‐dose with the lowest detectable dose of ⁓23 μGy. Photon attenuation parameter results were Zeff ⁓10, which mean that the M0.05Ti‐0.05LaA sample could be considered as a near tissue equivalent material. Due to this study, the M0.05Ti‐0.05LaA sample can be considered as a promising detector for application in personal and medical dosimetric monitoring.
- 26 January 2024
- Published by Wiley in Luminescence
- Vol. 39 (1) , e4681
Synthesis, thermoluminescence characterizations, and photon attenuation parameters of MgAl2O4 structure doped with different ions
In this work, different ion co‐doped Mg1‐xAl2O4 nanophosphors, coded as M5Cr‐5LaA, M5Cr‐5CuA, M0.07Si‐0.03CeA, and M0.05Ti‐0.05LaA, where 5Cr‐5La, 5Cr‐5Cu, 0.07Si‐0.03Ce, and 0.05Ti‐0.05La representing the added ions (mol%), were prepared using the sol–gel method. Phase structure, transmission electron microscope (TEM) images, and element feasibility were checked using X‐ray diffraction, TEM analysis, and energy dispersive X‐ray (EDX) spectroscopy. Their thermoluminescence (TL) response was checked using a 5 Gy γ‐test dose. The M0.05Ti‐0.05LaA sample was found to be best for the TL response with an ~1.1 times response compared with that of the MTS‐700 commercial detector. A wide range of dose–responses for the M0.05Ti‐0.05LaA sample was found up to a 20 Gy γ‐dose with the lowest detectable dose of ⁓23 μGy. Photon attenuation parameter results were Zeff ⁓10, which mean that the M0.05Ti‐0.05LaA sample could be considered as a near tissue equivalent material. Due to this study, the M0.05Ti‐0.05LaA sample can be considered as a promising detector for application in personal and medical dosimetric monitoring.
- Open Access
- 1 January 2024
- Published by Scientific Scholar in Arabian Journal of Chemistry
- Vol. 17 (1)
CeO2-CePO4 and Ag@CeO2-CePO4 nanocomposites from Penaeus semisulcatus for heavy metals sensing, UV shielding and cytotoxic applications
- 1 January 2024
- Published by Scientific Scholar in Arabian Journal of Chemistry
- Vol. 17 (1)
Open AccessCeO2-CePO4 and Ag@CeO2-CePO4 nanocomposites from Penaeus semisulcatus for heavy metals sensing, UV shielding and cytotoxic applications
- Open Access
- 21 December 2023
- Published by Elsevier in Journal of Radiation Research and Applied Sciences
- Vol. 17 (1)
Gamma radiation shielding by titanium alloy reinforced by polymeric composite materials
- 21 December 2023
- Published by Elsevier in Journal of Radiation Research and Applied Sciences
- Vol. 17 (1)
Open AccessGamma radiation shielding by titanium alloy reinforced by polymeric composite materials
- Open Access
Effects of Graphene Oxide (GO) and Reduced Graphene Oxide (rGO) on Green-Emitting Conjugated Copolymer’s Optical and Laser Properties Using Simulation and Experimental Studies
The properties of a conjugated copolymer (CP), poly[(9,9-Dioctyl-2,7-divinylenefluorenylene)-alt-co-(2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylene) (PDVF-co-MEH-PV), were investigated in the presence of graphene oxide (GO) and reduced graphene oxide (rGO) using absorption, fluorescence, laser, and time-resolved spectroscopy. CPs are usually dissolved in low-polar solvents. Although GO does not dissolve well, rGO and PDVF-co-MEH-PV dissolve in chloroform due to their oxygen acceptor sites. Hence, we studied rGO/PDVF-co-MEH-PV (CP/rGO), performing all experiments and simulations in chloroform. We performed simulations on PDVF-co-MEH-PV, approximate GO, and rGO using time-dependent density-functional theory calculations to comprehend the molecular dynamics and interactions at the molecular level. The simulation polymer used a tail-truncated oligomer model with up to three monomer units. The simulation and experimental results were in agreement. Further, the PDVF-co-MEH-PV exhibited fluorescence, laser quenching, rGO-mediated laser blinking, and spectral broadening effects when GO and rGO concentrations increased. The experimental and simulation results were compared to provide a plausible mechanism of interaction between PDVF-co-MEH-PV and rGO. We observed that for lower concentrations of rGO, the interaction did not considerably decrease the amplified spontaneous emissions of PDVF-co-MEH-PV. However, the fluorescence of PDVF-co-MEH-PV was considerably quenched at higher concentrations of rGO. These results could be helpful for future applications, such as in sensors, solar cells, and optoelectronic device design. To demonstrate the sensor capability of these composites, a paper-based sensor was designed to detect ethanol and nitrotoluene. An instrumentation setup was proposed that is cheap, reusable, and multifunctional.
Open AccessEffects of Graphene Oxide (GO) and Reduced Graphene Oxide (rGO) on Green-Emitting Conjugated Copolymer’s Optical and Laser Properties Using Simulation and Experimental Studies
The properties of a conjugated copolymer (CP), poly[(9,9-Dioctyl-2,7-divinylenefluorenylene)-alt-co-(2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylene) (PDVF-co-MEH-PV), were investigated in the presence of graphene oxide (GO) and reduced graphene oxide (rGO) using absorption, fluorescence, laser, and time-resolved spectroscopy. CPs are usually dissolved in low-polar solvents. Although GO does not dissolve well, rGO and PDVF-co-MEH-PV dissolve in chloroform due to their oxygen acceptor sites. Hence, we studied rGO/PDVF-co-MEH-PV (CP/rGO), performing all experiments and simulations in chloroform. We performed simulations on PDVF-co-MEH-PV, approximate GO, and rGO using time-dependent density-functional theory calculations to comprehend the molecular dynamics and interactions at the molecular level. The simulation polymer used a tail-truncated oligomer model with up to three monomer units. The simulation and experimental results were in agreement. Further, the PDVF-co-MEH-PV exhibited fluorescence, laser quenching, rGO-mediated laser blinking, and spectral broadening effects when GO and rGO concentrations increased. The experimental and simulation results were compared to provide a plausible mechanism of interaction between PDVF-co-MEH-PV and rGO. We observed that for lower concentrations of rGO, the interaction did not considerably decrease the amplified spontaneous emissions of PDVF-co-MEH-PV. However, the fluorescence of PDVF-co-MEH-PV was considerably quenched at higher concentrations of rGO. These results could be helpful for future applications, such as in sensors, solar cells, and optoelectronic device design. To demonstrate the sensor capability of these composites, a paper-based sensor was designed to detect ethanol and nitrotoluene. An instrumentation setup was proposed that is cheap, reusable, and multifunctional.
- Open Access
Synthesis of Silver Nanoparticles by Leaf Extract of Cucumis melo L. and Their In Vitro Antidiabetic and Anticoccidial Activities
In this study, silver nanoparticles were synthesized using Cucumis melo L. leaf extract via a green synthesis approach and their potential against diabetes and coccidiosis was tested under in vitro conditions. The phytochemical components in the leaf extract reacted with silver nitrate in solution and yielded C. melo-silver nanoparticles (Cm-AgNPs). The synthesis of AgNPs was confirmed via UV–visible spectroscopy by obtaining a peak at 440 nm. The nanoparticles were characterized by their morphology, crystallinity, and the presence of functional groups. In vitro α-amylase and α-glucosidase inhibition assays were carried out at different concentrations in the range of 20 to 100 μg/mL of Cm-AgNPs. The Cm-AgNPs exhibited enzyme inhibitory activity in a concentration-dependent manner. As the concentration of Cm-AgNPs increased the inhibitory activities were also increased linearly and the highest inhibition was observed at 100 μg/mL. The effectiveness of Cm-AgNPs against Eimeria tenalla was assessed by an in vitro 3-(4,5-dimethylthiazolyl-2)-2,5-diphenyltetrazolium bromide (MTT) assay using Madin–Darby bovine kidney (MDBK) cell lines. The results revealed that the viability of the oocysts and further sporulation were decreased with the increased concentration of Cm-AgNPs. The AgNPs synthesized from the C. melo leaf extract have shown promising potential against diabetes and coccidiosis, and they could be used in biomedical applications.
Open AccessSynthesis of Silver Nanoparticles by Leaf Extract of Cucumis melo L. and Their In Vitro Antidiabetic and Anticoccidial Activities
In this study, silver nanoparticles were synthesized using Cucumis melo L. leaf extract via a green synthesis approach and their potential against diabetes and coccidiosis was tested under in vitro conditions. The phytochemical components in the leaf extract reacted with silver nitrate in solution and yielded C. melo-silver nanoparticles (Cm-AgNPs). The synthesis of AgNPs was confirmed via UV–visible spectroscopy by obtaining a peak at 440 nm. The nanoparticles were characterized by their morphology, crystallinity, and the presence of functional groups. In vitro α-amylase and α-glucosidase inhibition assays were carried out at different concentrations in the range of 20 to 100 μg/mL of Cm-AgNPs. The Cm-AgNPs exhibited enzyme inhibitory activity in a concentration-dependent manner. As the concentration of Cm-AgNPs increased the inhibitory activities were also increased linearly and the highest inhibition was observed at 100 μg/mL. The effectiveness of Cm-AgNPs against Eimeria tenalla was assessed by an in vitro 3-(4,5-dimethylthiazolyl-2)-2,5-diphenyltetrazolium bromide (MTT) assay using Madin–Darby bovine kidney (MDBK) cell lines. The results revealed that the viability of the oocysts and further sporulation were decreased with the increased concentration of Cm-AgNPs. The AgNPs synthesized from the C. melo leaf extract have shown promising potential against diabetes and coccidiosis, and they could be used in biomedical applications.
- 25 February 2023
- Published by Elsevier in Chemosphere
- Vol. 323, 138179
UPLC‒ESI‒MS/MS profiling of active polyphenolics in Morinda coreia leaf extract and in vitro antioxidant and antibacterial activity
- 25 February 2023
- Published by Elsevier in Chemosphere
- Vol. 323, 138179
UPLC‒ESI‒MS/MS profiling of active polyphenolics in Morinda coreia leaf extract and in vitro antioxidant and antibacterial activity