ACAlyssa Calomeni-Eck

Alyssa Calomeni-Eck

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Alyssa Calomeni-Eck has a total of 46 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Bench-Scale Comparison of UV Light-Emitting Diodes and 3D-Printed Photocatalysts for Water Treatment

    by Alyssa Calomeni-Eck, Alan Kennedy, Jose Mattei-Sosa, Andrew McQueen, P. U. Ashvin Iresh Fernando, Gilbert Kosgei, Taylor Rycroft, Daniel Tague, Lauren May

    Advanced oxidation processes using titanium dioxide (TiO2) have emerged as a promising approach for the photocatalytic degradation of contaminants in water and have drawn extensive research attention despite limited translation of this technology to large-scale applications. The limitations of this technology include immobilization of the photocatalyst, scalability, and compatibility with available light sources. Using 3D printing to immobilize TiO2-based photocatalysts, we systematically evaluated the rates of photocatalytic degradation of methylene blue (MB) with different light-emitting diode (LED) ultraviolet (UV) light sources and modified TiO2-based photocatalytic materials. The UV LED lights successfully decreased the MB concentrations with half-lives ranging from 0.9 to 2.4 h, with relative photocatalytic performance of UVA-365 > UVA-395 > UVC-280. The photocatalytic degradation rates under UV LEDs were slower (0.9–2.4 h) than those achieved using a low-pressure mercury UV-C lamp (0.5 h) and were also lower than those observed under solar simulated lights (0.6 h). The TiO2 modified by an alkyl silane entity and embedded in a polylactic acid polymeric system with 3D printing exhibited the fastest methylene blue (MB) removal among the three TiO2-based structures evaluated, with a half-life of 0.6 h compared to the 1.6–17.7 h for the other materials. This research demonstrated that 3D printing enables the integration of functionalized photocatalysts, and, when paired with low-cost, low-energy UV LED lights, can achieve environmentally relevant rates of performance. Ultimately, these findings represent an incremental step toward improving the performance of 3D-printed photocatalytic materials.

  • Open Access

    Evaluating solid peroxide algaecides for sediment targeted preventative management of harmful algal blooms: Effect of prill size, water column depth and temperature

    by Alyssa Calomeni-Eck, Claire Middendorf, Andrew McQueen, Justin Wilkens, Ciera Kinley-Baird, Thomas Warmuth, Jeffrey Kline


  • Open Access

    Using environmental DNA to detect Microseira wollei (Oscillatoriales), a benthic harmful algal bloom, in Lake St. Clair (Michigan, USA )

    by Alyssa J. Calomeni‐Eck, Madeleine P. Malmfeldt, Denise L. Lindsay, Andrew D. McQueen

    Microseira wollei is a benthic cyanobacterium that can cause harmful algal blooms (HABs) and often requires management. However, a pervasive challenge for M. wollei management is characterizing the spatial and temporal extent of an impacted area, which can be time and resource intensive. Therefore, the aim of this study was to evaluate environmental DNA (eDNA) as a method for detecting benthic M . wollei using surficial water samples. To meet this objective, this study analyzed water samples collected from areas around Lake St. Clair, Michigan, USA, including regions impacted by M . wollei and secondary rivers (e.g., Clinton River) where no apparent M . wollei biomass was present. Split water samples were analyzed for the presence of M . wollei using traditional light microscopy and compared to eDNA methods using metabarcoding with a universal polymerase chain reaction (PCR) primer. With metabarcoding, we detected Microseira genetic material from the visible onshore biomass up to 93 m into Lake St. Clair and approximately 1–2 m from lakebed biomass. Notably, M. wollei was not discerned using light microscopy of any water samples concurrently collected with eDNA, suggesting greater detection power using the eDNA tool. Our combined datasets provide evidence of the benefits of the eDNA tool in characterizing the spatial extent of M. wollei within large, shallow, HAB‐impacted waterbodies and their connected waterways.


  • Open Access

    Review of Emerging and Nonconventional Analytical Techniques for Per- and Polyfluoroalkyl Substances (PFAS): Application for Risk Assessment

    by Andrew McQueen, Ashley Kimble, Paige Krupa, Anna Longwell, Alyssa Calomeni-Eck, David Moore

    Per- and polyfluoroalkyl substances (PFAS) are persistent environmental contaminants that pose significant risks to ecosystems and human health. Increasing regulatory demands for PFAS management have increased the need for rapid and deployable analytical technologies for both abiotic and biotic matrices. Traditional detection methods, such as standardized chromatography, often require weeks to months for analysis due to a limited number of appropriately accredited laboratories, delaying critical decision-making. This literature review is intended to identify promising emerging PFAS analytical techniques or technologies to facilitate more rapid (near real-time) analysis and explore their relevancy in supporting human and ecological risk assessments. Recently developed optical and electrochemical sensing approaches are enabling the detection of PFASs within minutes to hours, with detection limits typically aligning within reported ambient concentrations in water, soil, and sediment. These emerging technologies could (1) support planning and prioritization of sampling efforts during the problem formulation phase of risk assessment, (2) complement traditional chromatography methods to lower time and resource demands to improve sampling frequency over space and time, and (3) aid in risk-informed characterization of PFAS exposures based on identified chemical classes or groups. This review highlights those approaches and technologies that could potentially enhance the comprehensiveness and efficiency of PFAS risk assessment across diverse environmental settings in the future.


  • Open Access

    Photocatalytic degradation of microcystins from a field-collected cyanobacterial assemblage by 3D printed TiO2 structures using artificial versus solar irradiation

    by Alyssa J. Calomeni-Eck, Alan J. Kennedy, Andrew D. McQueen, Mark L. Ballentine, Brianna M. Fernando, Lauren R. May, Nicolas L. Melby


  • Open Access

    Demonstration of Proactive Algaecide Treatments Targeting Overwintering Cyanobacteria in Sediments of an Urban Pond

    by Alyssa Calomeni-Eck, Andrew McQueen, Ciera Kinley-Baird, Elizabeth Smith, Benjamin Growcock, Katlynn Decker, Schad Hampton, Anthony Stahl, Marvin Boyer, Gerard Clyde

    Most cyanobacteria that form harmful algal blooms (HABs) in inland waterbodies can overwinter in sediments. This field demonstration within an urban pond was conducted to bolster a database on the novel use of algaecide treatments to proactively target overwintering cyanobacteria located in sediments prior to HAB formation. In March 2023, a peroxide-based algaecide was applied to sediments of a water feature located in urban Kansas City, Kansas, and cyanobacteria responses were measured over subsequent weeks and months. Multiple lines of evidence were used to discern the impacts of proactive treatments on overwintering cells in sediments and HAB severity throughout the growing season. Although results of the measured cyanobacterial responses were mixed, three of five lines of evidence indicated proactive algaecide treatments were effective at decreasing the transfer of cyanobacteria to the water column and HAB severity during months when HABs tended to occur. Microcystin concentrations immediately post-treatment (hours) remained at the analytical detection limit (0.10 µg/L) and were below USEPA risk-based thresholds, highlighting the benefits of application prior to the exponential growth phase of toxin-producing cyanobacteria. These results expand the dataset and methodology for field-scale proactive algaecide applications targeting overwintering cyanobacterial cells in sediment to mitigate and delay HAB development.


  • Open Access

    Identification of cyanobacteria overwintering cells and environmental conditions causing growth: Application for preventative management

    by Alyssa J. Calomeni‐Eck, Andrew D. McQueen, Ciera M. Kinley‐Baird, Tony Clyde

    Harmful algal blooms (HABs) formed by freshwater cyanobacteria pose risks to human and ecological health globally. Some cyanobacteria form overwintering cells that remain in the sediment during non‐ideal growth conditions and provide an inoculum for HABs during the growing season, perpetuating the cyanobacterial life cycle. Preventative management targeted at decreasing the viability of overwintering cells is an attractive strategy for limiting HAB formation and decreasing risks. However, this approach is novel, and information is needed for sampling, identification and enumeration of overwintering cells in sediments as well as methods for determining if overwintering cells have the potential to contribute to HAB formation. Peer reviewed literature related to these topics are available; yet these data need to be synthesized and placed into the context of management. Therefore, a strategic review was conducted to inform methods and data needs for this preventative strategy. To sample overwintering cells, corers or dredges are used to collect surficial (0–2 cm) sediment layers containing overwintering cells. Identification and enumeration of overwintering cells via light microscopy are aided by dilution, sieving, or density separation of cells from sediment. Incubation studies which simulate environmental conditions triggering akinete germination and cell growth provide evidence of overwintering cell viability. Critical environmental conditions are light (≥0.5 μmol m−2 s−1) and temperature (20–30°C) for triggering akinete germination and growth of quiescent vegetative Microcystis sp. cells, respectively. Limited information was available on the roles of mixing and dissolved oxygen as environmental conditions for germination and growth. Synthesized information can be used to identify potential areas of concern in which overwintering cells are contributing to HABs. Additionally, this information can be used to design incubation studies in which field collected sediments containing overwintering cells are placed in ideal environmental conditions for germination and growth and cyanobacteria transferring to the water column are measured over time. These data inform investigations of areas that are candidates for preventative management and measurements of overwintering cell responses to management.


  • Open Access

    Efficacy of algaecides for the proactive treatment of overwintering cyanobacteria

    by Alyssa Calomeni, Andrew McQueen, Ciera Kinley-Baird, Gerard Clyde, Grace Gusler, Marvin Boyer, Elizabeth F. Smith