Zhao-Li Tian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhao-Li Tian has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Yun-Long Liu
Harbin Engineering University
6 shared publications - Hao Qin
College of Shipbuilding Engineering, Harbin Engineering University 1 , Harbin 150001, China
3 shared publications Di Yang
2 shared publications- Ji-Tuan Feng
College of Shipbuilding Engineering, Harbin Engineering University , Harbin 150001
2 shared publications - Jia-Jun Zou
College of Shipbuilding Engineering, Harbin Engineering University , Harbin 150001
2 shared publications - Qi Kong
College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, China
2 shared publications
Latest Publications
- 1 November 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
Moving mesh fluid–structure interaction approach for vortex-induced vibration simulation based on the discontinuous Galerkin method with adaptive mesh refinement technique
Vortex-induced vibration (VIV) remains a fundamental yet computationally challenging problem in computational fluid dynamics. This study develops a moving mesh fluid–structure interaction approach within a Runge–Kutta discontinuous Galerkin adaptive mesh refinement (AMR) framework. The viscous term in the compressible Navier–Stokes equations is discretized using the high-order interior penalty discontinuous Galerkin (IPDG) method. In addition to the above, key numerical advancements encompass the rigorous derivation of the Lax–Friedrichs (L–F) numerical flux formulation tailored for moving mesh, an enhanced AMR-driven nodal correction methodology designed for curved surface geometries, and the implementation of a ghost-node boundary condition treatment scheme to address dynamic mesh motion. Numerical validation proceeds through three phases: first, the Couette flow simulations confirm the IPDG method's spatial convergence order. Subsequent analysis of an unsteady flow past a cylinder demonstrates the AMR framework's efficacy in resolving vortex-dominated flow. Finally, six VIV benchmark cases are simulated using the third-order IPDG discretization, establishing the proposed FSI approach's accuracy. Furthermore, synthetic jets (SJs) flow control is investigated through four frequency-variant SJs configurations. The results reveal that the SJs can achieve complete VIV suppression at a low actuation frequency, while higher actuation frequencies reduce suppression efficiency because the energy of the SJs is more in the form of acoustic waves.
- 1 November 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
Moving mesh fluid–structure interaction approach for vortex-induced vibration simulation based on the discontinuous Galerkin method with adaptive mesh refinement technique
Vortex-induced vibration (VIV) remains a fundamental yet computationally challenging problem in computational fluid dynamics. This study develops a moving mesh fluid–structure interaction approach within a Runge–Kutta discontinuous Galerkin adaptive mesh refinement (AMR) framework. The viscous term in the compressible Navier–Stokes equations is discretized using the high-order interior penalty discontinuous Galerkin (IPDG) method. In addition to the above, key numerical advancements encompass the rigorous derivation of the Lax–Friedrichs (L–F) numerical flux formulation tailored for moving mesh, an enhanced AMR-driven nodal correction methodology designed for curved surface geometries, and the implementation of a ghost-node boundary condition treatment scheme to address dynamic mesh motion. Numerical validation proceeds through three phases: first, the Couette flow simulations confirm the IPDG method's spatial convergence order. Subsequent analysis of an unsteady flow past a cylinder demonstrates the AMR framework's efficacy in resolving vortex-dominated flow. Finally, six VIV benchmark cases are simulated using the third-order IPDG discretization, establishing the proposed FSI approach's accuracy. Furthermore, synthetic jets (SJs) flow control is investigated through four frequency-variant SJs configurations. The results reveal that the SJs can achieve complete VIV suppression at a low actuation frequency, while higher actuation frequencies reduce suppression efficiency because the energy of the SJs is more in the form of acoustic waves.
- 1 June 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (6)
Dynamic responses of a floating rigid hull subject to a pulsating bubble
A high-pressure pulsating bubble near the free surface casts intense nonlinear impacts on adjacent floating structure, and the rigid-body motion caused by the pulsating bubble jeopardize the stability of floating structure and even lead to a catastrophic sinkage. To address these critical fluid–structure interaction challenges, this study develops a novel numerical framework combining a modified penalty immersed boundary method with the Eulerian finite element method to simulate the interaction between a rigid hull and a pulsating bubble. The numerical model is validated by experiments between a steel hull and a small-weight underwater explosion. The experiment and simulations reveal two critical hydrodynamic phenomena: the formation of transient “side cavity” while bubble shrinking and the subsequent oblique jet toward broadside, both exhibiting strong correlations with the dynamic responses of hull. Parametric investigations on non-dimensional standoff parameters are conducted to elucidate the dynamic patterns of this cavity and the rigid motions of a Wigley hull. Our analysis demonstrates that while the motion of the rigid hull is correlated with the collapsing patterns of the side cavity, the hull's dynamic responses are predominantly driven by the accelerated flow field and the time-varying buoyancy environment induced by the heaving free surface surrounding the pulsating bubble. Yet, this jet is still worth further investigations, for that it might cause fatal damage to the local structures and endanger the vessels.
- 1 June 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (6)
Dynamic responses of a floating rigid hull subject to a pulsating bubble
A high-pressure pulsating bubble near the free surface casts intense nonlinear impacts on adjacent floating structure, and the rigid-body motion caused by the pulsating bubble jeopardize the stability of floating structure and even lead to a catastrophic sinkage. To address these critical fluid–structure interaction challenges, this study develops a novel numerical framework combining a modified penalty immersed boundary method with the Eulerian finite element method to simulate the interaction between a rigid hull and a pulsating bubble. The numerical model is validated by experiments between a steel hull and a small-weight underwater explosion. The experiment and simulations reveal two critical hydrodynamic phenomena: the formation of transient “side cavity” while bubble shrinking and the subsequent oblique jet toward broadside, both exhibiting strong correlations with the dynamic responses of hull. Parametric investigations on non-dimensional standoff parameters are conducted to elucidate the dynamic patterns of this cavity and the rigid motions of a Wigley hull. Our analysis demonstrates that while the motion of the rigid hull is correlated with the collapsing patterns of the side cavity, the hull's dynamic responses are predominantly driven by the accelerated flow field and the time-varying buoyancy environment induced by the heaving free surface surrounding the pulsating bubble. Yet, this jet is still worth further investigations, for that it might cause fatal damage to the local structures and endanger the vessels.
- 1 June 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (6)
Interaction between a nonspherical pulsating bubble and a free surface near a solid wall
The pulsating bubble near different boundaries demonstrates various dynamics. In this study, the three-dimensional Eulerian finite element method with the adaptive mesh refinement technique was used to investigate the interaction between a bubble and a free surface near a solid wall, including the toroidal bubble motion after the jet impact. The impact pressure on the solid wall was investigated, and the changing trend of pressure peak reverses when the initial depth of the bubble center is between 0.7 and 0.9 times the bubble's maximum radius. Throughout the process, competition occurs between the Bjerknes effects of the free surface and solid wall, which leads to the nonspherical pulsation of the bubble. Different collapsing forms of bubbles, i.e., the strong jet, weak jet, and crescent-type forms, were identified. Greater depth may result in a reduced height of a free surface water column, which is described in a fitting curve. Additionally, inclination of the solid wall can cause the free surface to exhibit a side hump or groove phenomenon. But for a large-scale bubble, no groove phenomenon of the free surface occurred, and the bubble collapsed in a horn-shaped form with two jets in the upward and downward directions.
- 1 June 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (6)
Interaction between a nonspherical pulsating bubble and a free surface near a solid wall
The pulsating bubble near different boundaries demonstrates various dynamics. In this study, the three-dimensional Eulerian finite element method with the adaptive mesh refinement technique was used to investigate the interaction between a bubble and a free surface near a solid wall, including the toroidal bubble motion after the jet impact. The impact pressure on the solid wall was investigated, and the changing trend of pressure peak reverses when the initial depth of the bubble center is between 0.7 and 0.9 times the bubble's maximum radius. Throughout the process, competition occurs between the Bjerknes effects of the free surface and solid wall, which leads to the nonspherical pulsation of the bubble. Different collapsing forms of bubbles, i.e., the strong jet, weak jet, and crescent-type forms, were identified. Greater depth may result in a reduced height of a free surface water column, which is described in a fitting curve. Additionally, inclination of the solid wall can cause the free surface to exhibit a side hump or groove phenomenon. But for a large-scale bubble, no groove phenomenon of the free surface occurred, and the bubble collapsed in a horn-shaped form with two jets in the upward and downward directions.
- 1 January 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (1)
Numerical investigation of the underwater explosion of a cylindrical explosive with the Eulerian finite-element method
The shock wave and bubble dynamics of an underwater explosion are significant in various fields. When the charge is non-spherical, the detonation process will remarkably affect the shock wave formation and the subsequent bubble motion. In this work, the underwater explosion of a cylindrical explosive is investigated numerically with the Eulerian finite-element method combined with the programed burn model treating the detonation process. The present model is validated by comparing the simulated results with the experimental ones. Then, several cases with different slenderness of the explosive charge in various buoyancy environments are simulated and analyzed. The results demonstrate a notable variation of the shock wave in different directions. The shock wave will reach the highest pressure peak and shortest pulse width at a certain angle determined by the ratio between the speeds of the detonation wave and the shock wave. Furthermore, the non-spherical initial expansion of the bubble casts a significant influence on the subsequent bubble evolution. Three typical jet morphologies are identified with different combinations of buoyancy parameter and oblateness ratios of the bubble, featured by a slightly oblique upward jet penetrating the bubble, a laminar jet that failed to penetrate the bubble continuously, and a pair of opposite horizontal jets penetrating the bubble. Meanwhile, the horizontal jets that happen under a weak buoyancy environment will reduce the upward migration.
- 1 January 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (1)
Numerical investigation of the underwater explosion of a cylindrical explosive with the Eulerian finite-element method
The shock wave and bubble dynamics of an underwater explosion are significant in various fields. When the charge is non-spherical, the detonation process will remarkably affect the shock wave formation and the subsequent bubble motion. In this work, the underwater explosion of a cylindrical explosive is investigated numerically with the Eulerian finite-element method combined with the programed burn model treating the detonation process. The present model is validated by comparing the simulated results with the experimental ones. Then, several cases with different slenderness of the explosive charge in various buoyancy environments are simulated and analyzed. The results demonstrate a notable variation of the shock wave in different directions. The shock wave will reach the highest pressure peak and shortest pulse width at a certain angle determined by the ratio between the speeds of the detonation wave and the shock wave. Furthermore, the non-spherical initial expansion of the bubble casts a significant influence on the subsequent bubble evolution. Three typical jet morphologies are identified with different combinations of buoyancy parameter and oblateness ratios of the bubble, featured by a slightly oblique upward jet penetrating the bubble, a laminar jet that failed to penetrate the bubble continuously, and a pair of opposite horizontal jets penetrating the bubble. Meanwhile, the horizontal jets that happen under a weak buoyancy environment will reduce the upward migration.
- Open Access
- 1 August 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (8)
Numerical investigation on the interaction of an oscillating bubble with the interface of a non-Newtonian fluid
The dynamics of an oscillating bubble near a liquid–liquid interface is a complex multiphase flow problem due to the highly nonlinear interaction, such as interface fragmentation and bubble tearing. When one of the liquid mediums is non-Newtonian, its constitution would significantly influence both the bubble motion and the interface evolution. In this study, a numerical model is established based on the Eulerian finite element method with the non-Newtonian fluid described by the Herschel–Bulkley model. The numerical model is validated by comparing with experimental results for a non-spherical pulsating bubble at a water–oil interface and the analytical solution for the laminar flow of non-Newtonian fluids in a circular tube. According to the simulation and analysis with different case parameters, our findings suggest that the non-Newtonian fluid forms a crater when squeezed by the bubble, and the downward jet can penetrate the bubble and further deepen the crater. As the distance parameter increases, the crater gradually disappears or even bulges. Furthermore, the yield shear stress can give non-Newtonian fluid plastic properties similar to a solid, effectively reducing the bubble's pulsation and jet load. Additionally, the flow behavior index n comes from the power-law model for non-Newtonian fluids and significantly impacts the jet's impact process. When n≤1, the crater is likelier to become funnel-shaped, whereas when n > 1, it is likelier to become bullet-head-shaped. In addition to enhancing the bubble's nonsphericity, the reduction in Reynolds number also weakens the crimp deformation of the interface. When the distance parameter is zero, the larger the buoyancy parameter and the less deformable the non-Newtonian fluid, the easier the bubble to split by the annular jet.
- 1 August 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (8)
Open AccessNumerical investigation on the interaction of an oscillating bubble with the interface of a non-Newtonian fluid
The dynamics of an oscillating bubble near a liquid–liquid interface is a complex multiphase flow problem due to the highly nonlinear interaction, such as interface fragmentation and bubble tearing. When one of the liquid mediums is non-Newtonian, its constitution would significantly influence both the bubble motion and the interface evolution. In this study, a numerical model is established based on the Eulerian finite element method with the non-Newtonian fluid described by the Herschel–Bulkley model. The numerical model is validated by comparing with experimental results for a non-spherical pulsating bubble at a water–oil interface and the analytical solution for the laminar flow of non-Newtonian fluids in a circular tube. According to the simulation and analysis with different case parameters, our findings suggest that the non-Newtonian fluid forms a crater when squeezed by the bubble, and the downward jet can penetrate the bubble and further deepen the crater. As the distance parameter increases, the crater gradually disappears or even bulges. Furthermore, the yield shear stress can give non-Newtonian fluid plastic properties similar to a solid, effectively reducing the bubble's pulsation and jet load. Additionally, the flow behavior index n comes from the power-law model for non-Newtonian fluids and significantly impacts the jet's impact process. When n≤1, the crater is likelier to become funnel-shaped, whereas when n > 1, it is likelier to become bullet-head-shaped. In addition to enhancing the bubble's nonsphericity, the reduction in Reynolds number also weakens the crimp deformation of the interface. When the distance parameter is zero, the larger the buoyancy parameter and the less deformable the non-Newtonian fluid, the easier the bubble to split by the annular jet.
- Open Access
- 1 September 2019
- Published by AIP Publishing in Physics of Fluids
- Vol. 31 (9) , 092111
Dynamical behavior of an oscillating bubble initially between two liquids
The interaction of an oscillating bubble and a nearby liquid–liquid interface is a complex multiphase problem that has many potential applications. In this work, the behavior of a bubble initially between two different liquids (i.e., with a stand-off distance of zero) is investigated numerically and is shown to exhibit a high degree of nonlinearity. A numerical model based on an Eulerian finite-element method is established. It is validated by simulating a nonspherical collapse of a bubble in the gravity field and comparing the results with those obtained in the experiment. Then, several cases of interaction between an oscillating bubble and a liquid–liquid interface are simulated with different initial conditions. It is confirmed that the density interface tends to induce the bubble to develop a jet that drills into the heavier liquid during the bubble collapse phase. The nondimensional period of oscillation increases with increasing density ratio of the two liquids, and an annular jet impacts, generating a pressure peak, when the density ratio exceeds 1.5. When the effect of gravity is taken into account, it is found that the annular impact is enhanced while the downward jet is weakened. In addition, a significantly sized bubble is split from the main bubble by the impact of the annular jet. When the buoyancy parameter exceeds a threshold value, gravity comes to dominate the bubble motion, and neither an annular jet nor a downward jet will develop. If the buoyancy parameter is large enough, the bubble migrates upward and detaches from the liquid–liquid interface during the collapse phase.
- 1 September 2019
- Published by AIP Publishing in Physics of Fluids
- Vol. 31 (9) , 092111
Open AccessDynamical behavior of an oscillating bubble initially between two liquids
The interaction of an oscillating bubble and a nearby liquid–liquid interface is a complex multiphase problem that has many potential applications. In this work, the behavior of a bubble initially between two different liquids (i.e., with a stand-off distance of zero) is investigated numerically and is shown to exhibit a high degree of nonlinearity. A numerical model based on an Eulerian finite-element method is established. It is validated by simulating a nonspherical collapse of a bubble in the gravity field and comparing the results with those obtained in the experiment. Then, several cases of interaction between an oscillating bubble and a liquid–liquid interface are simulated with different initial conditions. It is confirmed that the density interface tends to induce the bubble to develop a jet that drills into the heavier liquid during the bubble collapse phase. The nondimensional period of oscillation increases with increasing density ratio of the two liquids, and an annular jet impacts, generating a pressure peak, when the density ratio exceeds 1.5. When the effect of gravity is taken into account, it is found that the annular impact is enhanced while the downward jet is weakened. In addition, a significantly sized bubble is split from the main bubble by the impact of the annular jet. When the buoyancy parameter exceeds a threshold value, gravity comes to dominate the bubble motion, and neither an annular jet nor a downward jet will develop. If the buoyancy parameter is large enough, the bubble migrates upward and detaches from the liquid–liquid interface during the collapse phase.