De-Jun Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
De-Jun Sun has a total of 87 co-authors. Here are the top co-authors by number of shared publications:
- Zhen-Hua Wan
University of Science and Technology of China
28 shared publications - Xi-Yun Lu
University of Science and Technology of China
12 shared publications - Peng-Jun-Yi Zhang
State Key Laboratory of High Temperature Gas Dynamics, School of Engineering Science, University of Science and Technology of China
10 shared publications Bo-Fu Wang
And School of Power and Mechanical Engineering, Wuhan University, Wuhan 430071, China
5 shared publications- Dong-Jun Ma
School of Aerospace Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332-0150, USA
5 shared publications Cheng Chen
Low Speed Aerodynamics Institute, China Aerodynamics Research and Development Center, Mianyang, Sichuan 622762, China
4 shared publications
Latest Publications
- 1 November 2026
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 160 (5) , 3688-3706
Semi-empirical modeling of wall-pressure spectra in pressure-gradient boundary layers using gene expression programming
Accurate, fast, and robust prediction of wall-pressure spectra (WPS) in pressure-gradient boundary layers remains challenging due to strong non-equilibrium effects. In this work, gene expression programming (GEP) is employed as an interpretable, data-driven framework to address these limitations of classical semi-empirical models, including the Goody model and its extensions, whose validity is restricted under pressure-gradient conditions. Targeted improvements to GEP are introduced by incorporating a Goody-type-model-based optimization strategy together with a multi-model hybrid scheme, which significantly enhances convergence behavior and model robustness. As a result, a predictive model with improved accuracy and robustness is obtained, and validation results show that the proposed model consistently outperforms existing conventional models and a generic deep neural network on the test dataset. Shapley value analysis further suggests that the local pressure gradient and its accumulated history effects play a dominant role in determining the WPS.
- 1 November 2026
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 160 (5) , 3688-3706
Semi-empirical modeling of wall-pressure spectra in pressure-gradient boundary layers using gene expression programming
Accurate, fast, and robust prediction of wall-pressure spectra (WPS) in pressure-gradient boundary layers remains challenging due to strong non-equilibrium effects. In this work, gene expression programming (GEP) is employed as an interpretable, data-driven framework to address these limitations of classical semi-empirical models, including the Goody model and its extensions, whose validity is restricted under pressure-gradient conditions. Targeted improvements to GEP are introduced by incorporating a Goody-type-model-based optimization strategy together with a multi-model hybrid scheme, which significantly enhances convergence behavior and model robustness. As a result, a predictive model with improved accuracy and robustness is obtained, and validation results show that the proposed model consistently outperforms existing conventional models and a generic deep neural network on the test dataset. Shapley value analysis further suggests that the local pressure gradient and its accumulated history effects play a dominant role in determining the WPS.
- Open Access
- 28 September 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1044, E1
Mechanisms and control of sharp-edged roughness-induced transition in a supersonic boundary layer – CORRIGENDUM
- 28 September 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1044, E1
Open AccessMechanisms and control of sharp-edged roughness-induced transition in a supersonic boundary layer – CORRIGENDUM
- 1 September 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (9)
Sound-source-oriented Bayesian optimization for efficient airfoil tonal noise control
This study optimizes tonal noise suppression for a National Advisory Committee for Aeronautics 0012 airfoil. The airfoil operates at a Reynolds number of 5000 and an angle of attack of 5°. A sound-source-oriented Bayesian optimization framework integrated with multi-process acoustic theory is adopted. This framework optimizes the position and angle of steady wall blowing/suction under different amplitude conditions. It effectively overcomes the challenges of high-dimensional parameter space and time-delay effect in tonal noise control. Mode decompositions and continuous wavelet analysis are employed. The spatiotemporal features, energy sources, and instability origins of the acoustic modes are characterized in detail under varying control amplitudes. These analyses elucidate the underlying control mechanisms. The results indicate that the optimal suction locations are concentrated around the flow separation point of the uncontrolled baseline airfoil. The optimal suction angle is maintained near the wall-normal direction. As the control amplitude increases, the optimal suction position gradually shifts downstream. Concurrently, the dominant instability undergoes two distinct transition stages: from double-vortex shedding to single-vortex shedding and ultimately to suppression of the wake instability. Notably, the transition to single-vortex shedding yields the highest noise reduction efficiency. This shift in dominant mechanisms is accompanied by a migration of the instability mode's peak amplitude away from the wall. Energy analysis reveals that the instability modes are sustained by both the mean flow and nonlinear interactions. Both of these contributions are significantly attenuated under active control.
- 1 September 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (9)
Sound-source-oriented Bayesian optimization for efficient airfoil tonal noise control
This study optimizes tonal noise suppression for a National Advisory Committee for Aeronautics 0012 airfoil. The airfoil operates at a Reynolds number of 5000 and an angle of attack of 5°. A sound-source-oriented Bayesian optimization framework integrated with multi-process acoustic theory is adopted. This framework optimizes the position and angle of steady wall blowing/suction under different amplitude conditions. It effectively overcomes the challenges of high-dimensional parameter space and time-delay effect in tonal noise control. Mode decompositions and continuous wavelet analysis are employed. The spatiotemporal features, energy sources, and instability origins of the acoustic modes are characterized in detail under varying control amplitudes. These analyses elucidate the underlying control mechanisms. The results indicate that the optimal suction locations are concentrated around the flow separation point of the uncontrolled baseline airfoil. The optimal suction angle is maintained near the wall-normal direction. As the control amplitude increases, the optimal suction position gradually shifts downstream. Concurrently, the dominant instability undergoes two distinct transition stages: from double-vortex shedding to single-vortex shedding and ultimately to suppression of the wake instability. Notably, the transition to single-vortex shedding yields the highest noise reduction efficiency. This shift in dominant mechanisms is accompanied by a migration of the instability mode's peak amplitude away from the wall. Energy analysis reveals that the instability modes are sustained by both the mean flow and nonlinear interactions. Both of these contributions are significantly attenuated under active control.
- 5 August 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1040, A30
Mechanisms and control of sharp-edged roughness-induced transition in a supersonic boundary layer
Active control of transition induced by an isolated sharp-edged roughness element in a supersonic boundary layer is investigated via direct numerical simulation and biglobal stability analysis. The blowing/suction strips and distributed blowing/suction configurations are employed for transition control, respectively. A parametric study of control amplitudes for the blowing/suction strip reveals that multiple distinct mechanisms govern the control efficacy. Specifically, small-amplitude blowing suppresses sharp-edged roughness-induced transition, while large-amplitude blowing promotes it. Analysis via the flow-freezing technique discloses an intrinsic competition mechanism: the blowing strip suppresses the wake mode while simultaneously inducing very-low-frequency unsteadiness related to the horseshoe vortices on both sides of the roughness. Conversely, suction strip control exhibits the opposite behaviour: low amplitudes sharply promote transition, while high amplitudes effectively delay it. Dynamic mode decomposition indicates that the small-amplitude suction strip will excite an ultra-low-frequency unstable mode, and the transition is driven by non-modal growth rather than the wake mode. To mitigate the limitations of strip-based control, we propose three distributed blowing/suction configurations that can significantly reduce the growth rates of both sinuous and varicose modes, thereby delaying the transition more effectively. To investigate the underlying control mechanisms, the linearised vorticity transport equation is derived. This framework enables quantitative analysis of sinuous and varicose mode growth mechanisms from a vortex dynamics perspective, elucidating the growth-promoting interactions among different vorticity components within wake modes and accounting for their enhanced growth rates relative to the Tollmien–Schlichting waves. Based on perturbed vorticity transport equations, it is revealed that the key mode stabilisation mechanism is mainly associated with marked suppression of the tilting terms for wall-normal perturbation vorticity and the production term for the spanwise perturbation vorticity for strip control. However, the proposed distributed blowing/suction configurations not only suppress the spanwise perturbation vorticity generation but also totally inhibit the wall-normal perturbation vorticity production term, leading to effective transition delay.
- 5 August 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1040, A30
Mechanisms and control of sharp-edged roughness-induced transition in a supersonic boundary layer
Active control of transition induced by an isolated sharp-edged roughness element in a supersonic boundary layer is investigated via direct numerical simulation and biglobal stability analysis. The blowing/suction strips and distributed blowing/suction configurations are employed for transition control, respectively. A parametric study of control amplitudes for the blowing/suction strip reveals that multiple distinct mechanisms govern the control efficacy. Specifically, small-amplitude blowing suppresses sharp-edged roughness-induced transition, while large-amplitude blowing promotes it. Analysis via the flow-freezing technique discloses an intrinsic competition mechanism: the blowing strip suppresses the wake mode while simultaneously inducing very-low-frequency unsteadiness related to the horseshoe vortices on both sides of the roughness. Conversely, suction strip control exhibits the opposite behaviour: low amplitudes sharply promote transition, while high amplitudes effectively delay it. Dynamic mode decomposition indicates that the small-amplitude suction strip will excite an ultra-low-frequency unstable mode, and the transition is driven by non-modal growth rather than the wake mode. To mitigate the limitations of strip-based control, we propose three distributed blowing/suction configurations that can significantly reduce the growth rates of both sinuous and varicose modes, thereby delaying the transition more effectively. To investigate the underlying control mechanisms, the linearised vorticity transport equation is derived. This framework enables quantitative analysis of sinuous and varicose mode growth mechanisms from a vortex dynamics perspective, elucidating the growth-promoting interactions among different vorticity components within wake modes and accounting for their enhanced growth rates relative to the Tollmien–Schlichting waves. Based on perturbed vorticity transport equations, it is revealed that the key mode stabilisation mechanism is mainly associated with marked suppression of the tilting terms for wall-normal perturbation vorticity and the production term for the spanwise perturbation vorticity for strip control. However, the proposed distributed blowing/suction configurations not only suppress the spanwise perturbation vorticity generation but also totally inhibit the wall-normal perturbation vorticity production term, leading to effective transition delay.
- 1 August 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (8)
Characteristics of the three-dimensional boundary layer over a lifting body at Mach 12
Direct numerical simulation is performed to investigate the three-dimensional turbulent boundary layer on the leeward side of the Hypersonic Transition Research Vehicle at Mach 12 and a 6° angle of attack. Under the combined influence of bypass transition induced by blowing/suction and three-dimensional effects, two spatially separated regions of enhanced skin friction and wall heat flux (WHF) are identified, denoted as regions A and B, whose formation mechanisms are fundamentally distinct. In region A, the high WHF is predominantly driven by steepened gradients induced by pressure gradients, whereas the enhanced skin friction is further driven by the unsteady separation and reattachment resulting from an adverse-to-favorable pressure gradient transition, exhibiting banded quasi-streamwise high-momentum flows. Region B, in contrast, is governed by the roll-up and breakdown of quasi-streamwise vortices, which sustain a fully developed turbulent state populated by fine-scale transverse vortical structures and azimuthally distributed heat-flux streaks. Compressibility effects are pronounced in both regions, as evidenced by the emergence of shocklets extending into the outer boundary layer. The two regions further exhibit contrasting turbulence signatures: large-scale structures driven by blowing/suction generate outer peaks in the Reynolds stresses upstream, whereas intense turbulence production in region B gives rise to distinct inner peaks. These findings highlight the critical role of geometric three-dimensionality and compressibility-induced structural changes in shaping the aerodynamic and aerothermal environment of high-speed lifting-body configurations.
- 1 August 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (8)
Characteristics of the three-dimensional boundary layer over a lifting body at Mach 12
Direct numerical simulation is performed to investigate the three-dimensional turbulent boundary layer on the leeward side of the Hypersonic Transition Research Vehicle at Mach 12 and a 6° angle of attack. Under the combined influence of bypass transition induced by blowing/suction and three-dimensional effects, two spatially separated regions of enhanced skin friction and wall heat flux (WHF) are identified, denoted as regions A and B, whose formation mechanisms are fundamentally distinct. In region A, the high WHF is predominantly driven by steepened gradients induced by pressure gradients, whereas the enhanced skin friction is further driven by the unsteady separation and reattachment resulting from an adverse-to-favorable pressure gradient transition, exhibiting banded quasi-streamwise high-momentum flows. Region B, in contrast, is governed by the roll-up and breakdown of quasi-streamwise vortices, which sustain a fully developed turbulent state populated by fine-scale transverse vortical structures and azimuthally distributed heat-flux streaks. Compressibility effects are pronounced in both regions, as evidenced by the emergence of shocklets extending into the outer boundary layer. The two regions further exhibit contrasting turbulence signatures: large-scale structures driven by blowing/suction generate outer peaks in the Reynolds stresses upstream, whereas intense turbulence production in region B gives rise to distinct inner peaks. These findings highlight the critical role of geometric three-dimensionality and compressibility-induced structural changes in shaping the aerodynamic and aerothermal environment of high-speed lifting-body configurations.
- 1 June 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (6)
Large-scale separation-induced secondary turbulence amplification in shock wave/turbulent boundary layer interaction
Turbulence amplification in shock wave/turbulent boundary layer interactions critically affects flow unsteadiness and wall loading in supersonic aerodynamic configurations. Direct numerical simulations (DNS) are performed at shock generator angles of β=8°, 10°, and 12°. At the two smaller angles, turbulence amplification is confined to the vicinity of the separation point. As β increases to 12°, however, a pronounced secondary amplification emerges near the reattachment point, giving rise to a bimodal streamwise distribution of turbulent kinetic energy (TKE). Spectral analysis of the TKE production terms reveals that this secondary amplification is predominantly driven by shear production associated with large-scale vortical structures. Global stability analysis (GSA) of the mean flow further demonstrates that all unstable eigenmodes are intrinsically tied to the separation bubble, and the most unstable spanwise wavenumber predicted by GSA agrees closely with the dominant scale observed in the DNS. Reduced-order variational mode decomposition identifies an energetically dominant, low-frequency three-dimensional mode in the reattachment region for the β=12° case, characterized by coherent Görtler-like vortices whose spanwise wavelength is consistent with both the DNS and GSA results. These results suggest that the secondary turbulence amplification originates from the modal instability of the mean flow associated with the large-scale separation bubble and the coherent structures it induces.
- 1 June 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (6)
Large-scale separation-induced secondary turbulence amplification in shock wave/turbulent boundary layer interaction
Turbulence amplification in shock wave/turbulent boundary layer interactions critically affects flow unsteadiness and wall loading in supersonic aerodynamic configurations. Direct numerical simulations (DNS) are performed at shock generator angles of β=8°, 10°, and 12°. At the two smaller angles, turbulence amplification is confined to the vicinity of the separation point. As β increases to 12°, however, a pronounced secondary amplification emerges near the reattachment point, giving rise to a bimodal streamwise distribution of turbulent kinetic energy (TKE). Spectral analysis of the TKE production terms reveals that this secondary amplification is predominantly driven by shear production associated with large-scale vortical structures. Global stability analysis (GSA) of the mean flow further demonstrates that all unstable eigenmodes are intrinsically tied to the separation bubble, and the most unstable spanwise wavenumber predicted by GSA agrees closely with the dominant scale observed in the DNS. Reduced-order variational mode decomposition identifies an energetically dominant, low-frequency three-dimensional mode in the reattachment region for the β=12° case, characterized by coherent Görtler-like vortices whose spanwise wavelength is consistent with both the DNS and GSA results. These results suggest that the secondary turbulence amplification originates from the modal instability of the mean flow associated with the large-scale separation bubble and the coherent structures it induces.
- 1 April 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (4)
Intrinsic compressibility effects on spectral characteristics of wall pressure fluctuations beneath turbulent boundary layers
Intrinsic compressibility (IC), associated with changes in fluid volume, has often been overlooked in high-speed turbulent boundary layers (TBLs). To quantify this critical effect on the spectrum of wall pressure fluctuations (WPFs), direct numerical simulations of zero-pressure-gradient flat-plate turbulent boundary layers were conducted, covering four freestream Mach numbers Ma = 0.5–8 and four wall temperature conditions Tw/Tr = 0.25–1. The results demonstrate that wall cooling under high-speed conditions markedly enhances IC effects. This enhancement is manifested through the emergence of alternating positive and negative dilatational structures and changes in the characteristic length scale. Furthermore, IC effects induce distinct local humps in the WPF frequency spectra, which lead to the failure of the well-known Goody model in accurately predicting the spectral features. Under wall cooling conditions, spectral energy in the wavenumber–frequency space becomes more concentrated, peak amplitudes are enhanced, and a distinct overlap between the acoustic and convective regions is observed. Moreover, IC effects cause the slow acoustic waves to become progressively submerged within the convective ridge, while the fast acoustic waves shift toward it, thereby intensifying the coupled interaction between acoustic waves and convective vortices.
- 1 April 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (4)
Intrinsic compressibility effects on spectral characteristics of wall pressure fluctuations beneath turbulent boundary layers
Intrinsic compressibility (IC), associated with changes in fluid volume, has often been overlooked in high-speed turbulent boundary layers (TBLs). To quantify this critical effect on the spectrum of wall pressure fluctuations (WPFs), direct numerical simulations of zero-pressure-gradient flat-plate turbulent boundary layers were conducted, covering four freestream Mach numbers Ma = 0.5–8 and four wall temperature conditions Tw/Tr = 0.25–1. The results demonstrate that wall cooling under high-speed conditions markedly enhances IC effects. This enhancement is manifested through the emergence of alternating positive and negative dilatational structures and changes in the characteristic length scale. Furthermore, IC effects induce distinct local humps in the WPF frequency spectra, which lead to the failure of the well-known Goody model in accurately predicting the spectral features. Under wall cooling conditions, spectral energy in the wavenumber–frequency space becomes more concentrated, peak amplitudes are enhanced, and a distinct overlap between the acoustic and convective regions is observed. Moreover, IC effects cause the slow acoustic waves to become progressively submerged within the convective ridge, while the fast acoustic waves shift toward it, thereby intensifying the coupled interaction between acoustic waves and convective vortices.
- 1 July 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Sound source analysis based on the constrained acoustic resolvent in a physical forcing space
The linearized inhomogeneous Euler (LIE) equation, originated from the generalized acoustic analogy theory, demonstrates that there is an exact analogy between the fluctuations occurring in any real flow and the linear inviscid fluctuations about an arbitrary flow produced by appropriate external stress and energy flux perturbations, which can be regarded as an input−output system. By employing a well-defined base flow, acoustic resolvent analysis can be performed based on the LIE equation, where the forcing mode corresponds to the sound source and the response mode to the far-field noise. According to such analyses, one can identify the nominally sound source structures that possess the highest acoustic radiation efficiency, which are optimally enhanced by the LIE system. However, a significant challenge arises from the rarity or even the nonexistence of these structures in actual flows. To address this, we have developed a constrained acoustic resolvent analysis with a physical low-dimensional forcing space, in which the forcing is space-time correlated. This approach can reveal the most significant part of sound source structures within flow fields, which is crucial for economical and efficient noise reduction control design. Then, sound noise analysis based on the constrained acoustic resolvent is applied in a subsonic turbulent jet. The dominant source mechanisms with high acoustic efficiency indicated by the optimal resolvent mode have been identified clearly. The leading forcing modes of constrained acoustic resolvent modes are capable of proposing a low-rank source model to recover the acoustic field. While the generalized acoustic analogy provided mathematical sources rather than true sound sources, we illustrated that the constrained acoustic resolvent is capable of distinguishing the ingredients with strong noise production in the far field and has the potential to develop a more accurate noise model as well as efficient noise control strategies in this framework.
- 1 July 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Sound source analysis based on the constrained acoustic resolvent in a physical forcing space
The linearized inhomogeneous Euler (LIE) equation, originated from the generalized acoustic analogy theory, demonstrates that there is an exact analogy between the fluctuations occurring in any real flow and the linear inviscid fluctuations about an arbitrary flow produced by appropriate external stress and energy flux perturbations, which can be regarded as an input−output system. By employing a well-defined base flow, acoustic resolvent analysis can be performed based on the LIE equation, where the forcing mode corresponds to the sound source and the response mode to the far-field noise. According to such analyses, one can identify the nominally sound source structures that possess the highest acoustic radiation efficiency, which are optimally enhanced by the LIE system. However, a significant challenge arises from the rarity or even the nonexistence of these structures in actual flows. To address this, we have developed a constrained acoustic resolvent analysis with a physical low-dimensional forcing space, in which the forcing is space-time correlated. This approach can reveal the most significant part of sound source structures within flow fields, which is crucial for economical and efficient noise reduction control design. Then, sound noise analysis based on the constrained acoustic resolvent is applied in a subsonic turbulent jet. The dominant source mechanisms with high acoustic efficiency indicated by the optimal resolvent mode have been identified clearly. The leading forcing modes of constrained acoustic resolvent modes are capable of proposing a low-rank source model to recover the acoustic field. While the generalized acoustic analogy provided mathematical sources rather than true sound sources, we illustrated that the constrained acoustic resolvent is capable of distinguishing the ingredients with strong noise production in the far field and has the potential to develop a more accurate noise model as well as efficient noise control strategies in this framework.
- 1 May 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (5)
Wall permeability influence on turbulent structures and stress in compressible channel flows
Porous media are capable of promoting aerodynamic performance or suppressing noise radiation when applied to acoustic liners or airfoil trailing edges; however, the quantitative representations of the correlations between turbulence structures and wall permeability still remain an open question. In this study, direct numerical simulations of the channel flow over porous walls were conducted at a bulk Mach number of Mab=0.5 and a Reynolds number of Reb=4952. The permeable flow was modeled using the time-domain impedance boundary condition in the wall-normal direction. The results indicate that at a lower resistance, the resonance structures characterized by spanwise rollers would be induced with nearly fixed streamwise wavelengths, and the pre-multiplied spectrum of wall-normal velocity is mainly distributed throughout the viscous sublayer and buffer layer. The Helmholtz decomposition of velocities further reveals intensified dilatational motions in the near-wall region. To elucidate the relationship between the wall permeability and turbulent structures, we propose a novel decomposition method for the wall penetrability coefficient, applicable to porous wall flows. This decomposition method reveals that the flow penetrability at the wall is mainly enhanced by turbulent kinetic energy production and suppressed by the normal pressure gradient of the flow. As resistance decreases, turbulent kinetic energy production becomes the primary contributing factor. The decomposition method is then extended to the frequency domain to provide a more comprehensive understanding of the effect of wall permeability.
- 1 May 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (5)
Wall permeability influence on turbulent structures and stress in compressible channel flows
Porous media are capable of promoting aerodynamic performance or suppressing noise radiation when applied to acoustic liners or airfoil trailing edges; however, the quantitative representations of the correlations between turbulence structures and wall permeability still remain an open question. In this study, direct numerical simulations of the channel flow over porous walls were conducted at a bulk Mach number of Mab=0.5 and a Reynolds number of Reb=4952. The permeable flow was modeled using the time-domain impedance boundary condition in the wall-normal direction. The results indicate that at a lower resistance, the resonance structures characterized by spanwise rollers would be induced with nearly fixed streamwise wavelengths, and the pre-multiplied spectrum of wall-normal velocity is mainly distributed throughout the viscous sublayer and buffer layer. The Helmholtz decomposition of velocities further reveals intensified dilatational motions in the near-wall region. To elucidate the relationship between the wall permeability and turbulent structures, we propose a novel decomposition method for the wall penetrability coefficient, applicable to porous wall flows. This decomposition method reveals that the flow penetrability at the wall is mainly enhanced by turbulent kinetic energy production and suppressed by the normal pressure gradient of the flow. As resistance decreases, turbulent kinetic energy production becomes the primary contributing factor. The decomposition method is then extended to the frequency domain to provide a more comprehensive understanding of the effect of wall permeability.
- 1 January 2025
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 157 (1) , 215-233
Effects of leading-edge serration shape on noise reduction in rod-airfoil interactions
Leading-edge serrations inspired by owls exhibit the capability to control airfoil-turbulence interaction noise, but the design principle of the serration shape is still an open issue. To this end, we designed five types of serration shapes with different combinations of curvature, namely, triangular, ogee, anti-ogee, feather-like, and anti-feather-like. These curves are applied to serrated modifications with different bluntness levels (sharp or blunt) and amplitudes (0.05, 0.075, and 0.1 chord length). Considering these serration shapes, 30 cases with various curved types, bluntness levels, and amplitudes are investigated using compressible large-eddy simulation and the acoustic analogy of Ffowcs-Williams and Hawkings on a rod-airfoil configuration. The outcomes reveal a general trend where increased amplitude and blunted serrations are more effective in noise mitigation. Notably, the blunt feather-like (FB) serrations demonstrate the maximum noise reduction capacity across all amplitude levels, decreasing the overall sound power level by up to 2.1 dB. Through multi-process acoustic analysis, source characteristics responsible for generating noise are diagnosed. It is found that noise reduction primarily stems from the change in the source distribution and destructive interference among sound sources, consistent with prior studies. Generally, the serration shape would significantly affect the source distribution and sound interference without altering the fundamental noise reduction mechanisms. The FB shape exhibits the highest concentration of sources at its peaks and roots among all shapes. The presence of concentrated sources in these locations enhances destructive interference, effectively reducing noise emissions. The superior noise-reduction feature of FB serrations should be attributed to both the concentration of sources and the destructive interference. This extensive examination underscores the importance of serration design, especially the potential of FB serrations, in noise control strategies for rod-airfoil configurations, contributing to advancements in aeroacoustic engineering.
- 1 January 2025
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 157 (1) , 215-233
Effects of leading-edge serration shape on noise reduction in rod-airfoil interactions
Leading-edge serrations inspired by owls exhibit the capability to control airfoil-turbulence interaction noise, but the design principle of the serration shape is still an open issue. To this end, we designed five types of serration shapes with different combinations of curvature, namely, triangular, ogee, anti-ogee, feather-like, and anti-feather-like. These curves are applied to serrated modifications with different bluntness levels (sharp or blunt) and amplitudes (0.05, 0.075, and 0.1 chord length). Considering these serration shapes, 30 cases with various curved types, bluntness levels, and amplitudes are investigated using compressible large-eddy simulation and the acoustic analogy of Ffowcs-Williams and Hawkings on a rod-airfoil configuration. The outcomes reveal a general trend where increased amplitude and blunted serrations are more effective in noise mitigation. Notably, the blunt feather-like (FB) serrations demonstrate the maximum noise reduction capacity across all amplitude levels, decreasing the overall sound power level by up to 2.1 dB. Through multi-process acoustic analysis, source characteristics responsible for generating noise are diagnosed. It is found that noise reduction primarily stems from the change in the source distribution and destructive interference among sound sources, consistent with prior studies. Generally, the serration shape would significantly affect the source distribution and sound interference without altering the fundamental noise reduction mechanisms. The FB shape exhibits the highest concentration of sources at its peaks and roots among all shapes. The presence of concentrated sources in these locations enhances destructive interference, effectively reducing noise emissions. The superior noise-reduction feature of FB serrations should be attributed to both the concentration of sources and the destructive interference. This extensive examination underscores the importance of serration design, especially the potential of FB serrations, in noise control strategies for rod-airfoil configurations, contributing to advancements in aeroacoustic engineering.