Y. Rama Murthy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Y. Rama Murthy has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Sunil Kumar Tripathy
Research and Development Division, Tata Steel Ltd, Jamshedpur, India
9 shared publications Veerendra Singh
Research and Development Division, Tata Steel Ltd., Jamshedpur, India
3 shared publicationsC. Raghu Kumar
2 shared publicationsK. Udaya Bhaskar
2 shared publicationsNikkam Suresh
Research and Development Division, Tata Steel Ltd., Jamshedpur, India
2 shared publications- C. Raghu Kumar
Process Technology Group, Tata Steel, Jamshedpur 831001, India
1 shared publication
Latest Publications
- 3 September 2026
- Published by Springer Nature in Mining, Metallurgy & Exploration
- Vol. 43 (5) , 4909-4924
In-Depth Analysis of Silica Rejection From Low-Grade Dolomite Fines Using Dry and Wet Processing Methods
- 3 September 2026
- Published by Springer Nature in Mining, Metallurgy & Exploration
- Vol. 43 (5) , 4909-4924
In-Depth Analysis of Silica Rejection From Low-Grade Dolomite Fines Using Dry and Wet Processing Methods
- Open Access
Improving the Quality of Ferruginous Chromite Concentrates Via Physical Separation Methods
The low chromium-to-iron ratio of chromite ores is an important issue in some chromite deposits. The value of the chromite ore is indeed dictated in the market by its iron, as well as its chromium content. In the present study, a chromite concentrate was reprocessed by gravity (spiral concentrator) and magnetic separation to enhance the chromium-to-iron ratio. Also, detailed characterization studies including automated mineralogy were carried out to better understand the nature of the samples. Enhancing the chromium-to-iron ratio was achieved by using advanced spiral separators which will be discussed in this paper.
Open AccessImproving the Quality of Ferruginous Chromite Concentrates Via Physical Separation Methods
The low chromium-to-iron ratio of chromite ores is an important issue in some chromite deposits. The value of the chromite ore is indeed dictated in the market by its iron, as well as its chromium content. In the present study, a chromite concentrate was reprocessed by gravity (spiral concentrator) and magnetic separation to enhance the chromium-to-iron ratio. Also, detailed characterization studies including automated mineralogy were carried out to better understand the nature of the samples. Enhancing the chromium-to-iron ratio was achieved by using advanced spiral separators which will be discussed in this paper.
- 7 April 2016
- Published by EDP Sciences in Metallurgical Research & Technology
- Vol. 113 (3) , 303
Separation analysis of flotation to recover the carbon values from blast furnace gas cleaning plant sludge
In the present investigation, flotation experiments were carried out to recover the carbon values from a gas cleaning plant sludge generated from the blast furnace. Statistically designed experiments were conducted to evaluate the individual parameters and their interactional effects on the separation performance of flotation while recovering carbon from gas cleaning plant sludge of blast furnace. The influence of collector dosage, frother dosage, and feed pulp density was analyzed for the separation of carbon particles from the sludge. Also, the optimized process conditions for the studied variables were fixed to achieve the optimum separation performance. It is concluded that a froth product of 35% ash value at a yield of 20.7% is produced from the feed sludge analyzed 71.8% ash at optimum conditions of the flotation process. The optimized process can be adopted to treat this type of gas cleaning sludge for the recovery of carbon values.
- 7 April 2016
- Published by EDP Sciences in Metallurgical Research & Technology
- Vol. 113 (3) , 303
Separation analysis of flotation to recover the carbon values from blast furnace gas cleaning plant sludge
In the present investigation, flotation experiments were carried out to recover the carbon values from a gas cleaning plant sludge generated from the blast furnace. Statistically designed experiments were conducted to evaluate the individual parameters and their interactional effects on the separation performance of flotation while recovering carbon from gas cleaning plant sludge of blast furnace. The influence of collector dosage, frother dosage, and feed pulp density was analyzed for the separation of carbon particles from the sludge. Also, the optimized process conditions for the studied variables were fixed to achieve the optimum separation performance. It is concluded that a froth product of 35% ash value at a yield of 20.7% is produced from the feed sludge analyzed 71.8% ash at optimum conditions of the flotation process. The optimized process can be adopted to treat this type of gas cleaning sludge for the recovery of carbon values.
- 23 March 2016
- Published by Taylor & Francis in Mineral Processing and Extractive Metallurgy Review
- Vol. 37 (3) , 196-210
Processing of Ferruginous Chromite Ore by Dry High-Intensity Magnetic Separation
Mineral and morphological characteristics of chromite ore strongly affect the separation efficiency while upgrading the low-grade deposits. Usually, chromite ore enrichment is carried out by using gravity separation due to high-concentration criterion between chromite and other minerals. However, chromite ore from Sukinda region, India, is a typical ore body with high iron content in the chromite spinel as well as gangue content in the form of oxide and hydroxides of iron-bearing minerals. So, the separation efficiency reduces by gravity method due to the lower value of concentration criterion. To address this, dry magnetic separation is an alternative approach to separate these iron-bearing gangue minerals from the chromite. This work investigated on the application of different dry high-intensity magnetic separators to separate the chromite grains from ferruginous chromite ore deposits of India. Prior to the separation, two different ore deposits of Sukinda region are subjected to detailed mineral, chemical, morphological, as well as magnetic properties characterization to visualize the separation. Tests confirm the effect of magnetic field strength along with other process parameters that influence the process of the separation of iron-bearing gangue minerals. The results on these separators are related to the influence of mineralogy, process parameters, and magnetic property of minerals, based on the experimental and statistical analysis of the process. Also, effect of desliming of the low-grade deposit prior to the dry magnetic separation is highlighted.
- 23 March 2016
- Published by Taylor & Francis in Mineral Processing and Extractive Metallurgy Review
- Vol. 37 (3) , 196-210
Processing of Ferruginous Chromite Ore by Dry High-Intensity Magnetic Separation
Mineral and morphological characteristics of chromite ore strongly affect the separation efficiency while upgrading the low-grade deposits. Usually, chromite ore enrichment is carried out by using gravity separation due to high-concentration criterion between chromite and other minerals. However, chromite ore from Sukinda region, India, is a typical ore body with high iron content in the chromite spinel as well as gangue content in the form of oxide and hydroxides of iron-bearing minerals. So, the separation efficiency reduces by gravity method due to the lower value of concentration criterion. To address this, dry magnetic separation is an alternative approach to separate these iron-bearing gangue minerals from the chromite. This work investigated on the application of different dry high-intensity magnetic separators to separate the chromite grains from ferruginous chromite ore deposits of India. Prior to the separation, two different ore deposits of Sukinda region are subjected to detailed mineral, chemical, morphological, as well as magnetic properties characterization to visualize the separation. Tests confirm the effect of magnetic field strength along with other process parameters that influence the process of the separation of iron-bearing gangue minerals. The results on these separators are related to the influence of mineralogy, process parameters, and magnetic property of minerals, based on the experimental and statistical analysis of the process. Also, effect of desliming of the low-grade deposit prior to the dry magnetic separation is highlighted.
- 1 July 2013
- Published by Elsevier in International Journal of Mineral Processing
- Vol. 122, 47-53
Characterisation and separation studies of Indian chromite beneficiation plant tailing
- 1 July 2013
- Published by Elsevier in International Journal of Mineral Processing
- Vol. 122, 47-53
Characterisation and separation studies of Indian chromite beneficiation plant tailing
- 1 November 2012
- Published by Elsevier in Powder Technology
- Vol. 230, 36-47
Parametric CFD studies on hydrocyclone
- 1 November 2012
- Published by Elsevier in Powder Technology
- Vol. 230, 36-47
Parametric CFD studies on hydrocyclone
- 1 May 2012
- Published by Elsevier in Powder Technology
- Vol. 221, 387-394
Modeling and optimization of spiral concentrator for separation of ultrafine chromite
- 1 May 2012
- Published by Elsevier in Powder Technology
- Vol. 221, 387-394
Modeling and optimization of spiral concentrator for separation of ultrafine chromite
- 1 September 2011
- Published by Elsevier in International Journal of Mineral Processing
- Vol. 100 (3-4) , 136-141
Prediction of process input interactions of Floatex Density Separator performance for separating medium density particles
- 1 September 2011
- Published by Elsevier in International Journal of Mineral Processing
- Vol. 100 (3-4) , 136-141
Prediction of process input interactions of Floatex Density Separator performance for separating medium density particles
- 1 May 2011
- Published by Elsevier in International Journal of Mineral Processing
- Vol. 99 (1-4) , 84-86
Beneficiation and agglomeration process to utilize low-grade ferruginous manganese ore fines
- 1 May 2011
- Published by Elsevier in International Journal of Mineral Processing
- Vol. 99 (1-4) , 84-86
Beneficiation and agglomeration process to utilize low-grade ferruginous manganese ore fines
- 1 April 2011
- Published by Elsevier in Minerals Engineering
- Vol. 24 (5) , 375-380
Chrome ore beneficiation challenges & opportunities – A review
- 1 April 2011
- Published by Elsevier in Minerals Engineering
- Vol. 24 (5) , 375-380
Chrome ore beneficiation challenges & opportunities – A review