JGJianwen Gao

Jianwen Gao

*This is an algorithmically generated author record based on publicly available information.

Jianwen Gao has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Pore Space Characteristics and Migration Changes in Hydrocarbons in Shale Reservoir

    by Yiqian Qu, Siqi Ouyang, Jianwen Gao, Jian Shi, Yiying Wu, Yuting Cheng, Zhen Zhou, Zhou Lyu, Wei Sun, Hanning Wu

    The pore structure and mineral characteristics affect the accumulation and migration of hydrocarbons in shale, which determines the production capacity of shale oil. In this study, shale samples from the Chang 7 member of the Ordos Basin in China were selected to investigate the pore space characteristics, the effect of hydrocarbon accumulation on pore heterogeneity, and the hydrocarbon migration changes based on fractal theory, and a series of experiments were conducted involving X-ray diffraction (XRD), total organic carbon (TOC), Soxhlet extraction, and low-temperature nitrogen (N2) and carbon dioxide (CO2) adsorption. Then, the factors affecting extraction efficiency in shale pores were discussed. The interparticle pores contributed most to the accumulation of shale oil, and the organic matter (OM) pores contributed positively to the adsorption of hydrocarbons. The accumulation of hydrocarbons in the pore space did not increase the heterogeneity of the shale pore structure. The contents, states, and positions of hydrocarbons changed during the extraction process. Hydrocarbons were redistributed on the pore surface after Soxhlet extraction, and the heterogeneity of hydrocarbon adsorption and pore surface roughness were improved. Some heavy hydrocarbons and adsorbed components were pyrolyzed, resulting in the gradual escape of the adsorbed layer in the large pores. However, the free oil in the small pores diffused to the large pores and reaggregated on the surface, restoring a stable adsorption layer. The extraction rate was closely related to the pore throat structure and the wettability of mineral surfaces. The configuration between pores and throats had a crucial influence on the extraction rate. A high proportion of meso-pores, which effectively connect micro- and macro-pores, had a higher diffusion efficiency and a higher extraction rate. The OM pores with high energy adsorption were located in the micro-pores, and the shale oil existed in a dissolved state with high mobile capacity. The wettability of mineral surfaces affected the adsorption behavior during extraction, and strong oil wetting promoted hydrocarbon re-adsorption in clay minerals, so that the volume of micro-pores was smaller after extraction.


  • The main controlling factors of tensile strength in sight of shale reservoir under horizontal bedding: Example of the Lower Paleozoic Niutitang Formation shale from Micangshan, China

    by Delu Li, Haibin Li, Qianyang He, Jianwen Gao, Wenxing Tao, Shimiao Wang

    Understanding the mechanical characteristics of marine shale during fracturing is essential for shale gas development, and its core scientific problem is what factors in shale control its mechanical properties. The 12 shale samples from the Lower Paleozoic Niutitang Formation in Micangshan are tested for tensile strength and examined using X-ray diffraction, low-field nuclear magnetic resonance (NMR), EA2000 elemental analyzer, and scanning electron microscopy to explore the main controlling factors of shale tensile strength under horizontal bedding conditions. The findings are as follows. (1) The tensile strength of the shale is relatively high, ranging from 10.05 MPa to 20.34 MPa. Quartz is the largest proportion of the shale minerals, accounting for 53.2 wt%–59.0 wt%, followed by anorthose and clay minerals. Total organic carbon (TOC) concentration ranges from 1.7 wt% to 4.1 wt%. (2) NMR results indicate that the pore structure of shale is mainly mesoporous, accounting for 75.76%–88.03%, followed by macropores (12.57%–21.24%) and micropores (0.68%–4.91%). Low-pressure nitrogen adsorption and desorption results indicate that the average pore diameter of shale is 12.58–16.02 nm, which is basically consistent with NMR results. The negative correlation between fractal dimension D2 and tensile strength indicates that the higher the tensile strength of the shale, the lower the complexity of its seepage pores. (3) Micropores occur mainly in clay minerals, whereas quartz indicates positively correlation with mesoporous content. The higher the proportion of mesopores, the lower the tensile strength. This indicates that the mesopores are the main factor controlling the tensile strength, and the quartz content in minerals is a secondary factor restricting the tensile strength. TOC has little controlling action on the tensile strength. This contribution provides a theoretical basis for shale fracturing.


  • Open Access

    Quartz Origins and Paleoenvironmental Controls on Organic Matter Accumulation of Marine Shale in the Ordovician Wulalike Formation, Northwestern Ordos Basin, China: Significance for Shale Gas Exploration

    by Yanni Zhang, Rongxi Li, Shengli Xi, Jianwen Gao, Lei Chen, Hexin Huang, Bangsheng Zhao, Ahmed Khaled

    The Ordovician Wulalike marine siliceous shale is a notable hydrocarbon source rock in the Northwestern Ordos Basin. However, the causes of quartz and organic matter enrichment are still a mystery to experts. In this study, the organic geochemistry (maceral compositions, Rbitu, and TOC) and elemental geochemistry (major and trace elements) with mineralogy (XRD) and petrography were jointly acquired to systematically investigate the quartz origins and the paleoenvironment, and the main controlling factors for organic matter enrichment in the Wulalike shale. The results show that the organic matter is type I kerogen with low TOC concentrations (average 0.51%), and that the thermal evolution has reached mature and high mature stages (mean Requ is 1.08%). Three types of quartz are developed in Wulalike shale: biogenic quartz (average 63%) is the most dominant, followed by clastic quartz (average 31%) and microcrystalline quartz (average 6%). Babio and Ba/Al values indicate the low paleoproductivity, which is the primary cause for the low TOC found throughout the area. Redox indexes show the anoxic or dysoxic to oxic conditions from the bottom to the top of the section. Paleoclimate and paleowater depth proxies also changed from the bottom to the top. Various paleoenvironments and sedimentological evidence show that Wulalike shale went through the changing environments, and the early sedimentary environments were conducive to organic matter enrichment, leading to a relatively high TOC. The paleoproductivity and preservation conditions have an impact on organic matter enrichment. Based on the results of biogenic quartz distribution and sedimentary environments, it is considered that the bottom of the Wulalike Formation is the most favorable for shale gas exploration and development.