Sara Cura
Research Subjects
Sara Cura has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Stefano Grimaldi
Università degli Studi di Trento
2 shared publications - Antônio Antunes Martins
Universidade de Évora
1 shared publication - Diogo Cardoso1 shared publication
- Gabriele Luigi Francesco Berruti
Dipartimento di Studi Umanistici, Università degli Studi di Ferrara, Corso Ercole I d’Este 32, 44100 Ferrara, Italy
1 shared publication - Luis Raposo
Museu Nacional de Arqueologia
1 shared publication - Luiz Antonio Pacheco Queiroz
Doutor em Arqueologia Pós-Doutorando no PPGap Doutor em Geografia (Geografia Humana) Doutor em Geografia (Geografia Humana) Pós-Doutorando no PPGGeog Universidade Federal do Recôncavo da Bahia Universidade Federal do Amazonas Universidade Federal do Amazonas Professor no Instituto Federal do Acre -IFAC/CSM
1 shared publication
Latest Publications
- Open Access
- 11 November 2017
- Published by Edinburgh University Library in Journal of Lithic Studies
- Vol. 4 (3) , 27-56
As indústrias do Paleolítico Inferior e Médio associadas ao Terraço T4 do Baixo Tejo (Portugal central); Arquivos da mais antiga ocupação humana no oeste da Ibéria, com ca. 340 ka a 155 ka
Because of their geomorphological and sedimentary records, rivers provide relevant archives of palaeoenvironmental change, namely palaeoclimatic and palaeogeographic. Well-dated long-term sedimentary successions sequences are of the most value, with the ages of sedimentary events, included fossils and archaeological materials provided by a range of numerical dating techniques. The Quaternary fluvial archives of the Tejo River in Portugal (the Lower Tejo) can provide important data for studies of landscape and sedimentary evolution, but also of the early human occupation. The present state of art achieved by using methods of geomorphology, lithostratigraphy, sedimentology, archaeology and absolute dating in the study of the Lower Tejo River T4 terrace is here summarized. The Lower Tejo has staircases that comprise a culminant sedimentary unit (the ancestral Tejo River, before the beginning of the fluvial incision stage) and six terraces (T1 to T6) located above the modern alluvial plain, with details as follows: T6 at +7-10 m (above river level), 64-32 ka, with Late Middle Palaeolithic (late Mousterian); T5 at +18-26 m, 136-75 ka, with Middle Palaeolithic industries and Mousterian knapping (Levallois); T4 at +34-48 m, ∼340-155 ka, with Lower Palaeolithic (Early to Late Acheulian) to early Middle Palaeolithic; T3, T2 and T1 do not contain archaeological materials and only from the T3 (+43-78 m) and T1 (+84-164 m) finite absolute ages were obtained. The prehistoric human occupation of this area is of renewed interest because it contains evidence for an extensive Palaeolithic occupation. Related archaeological sites are present on both sides of the river, from the vicinity of the Spanish border (Vila Velha de Ródão; upstream) to the Lisboa area (near the river mouth). This work focuses on the Palaeolithic sites that were found on the T4 terrace, which is made of a basal Lower Gravels unit and an overlying Upper Sands unit. The oldest artefacts previously found in the Lower Gravels unit of the T4 terrace, display crude bifacial forms that can be attributed to the Acheulian, with a probable age of ca. 340 to 325 ka. In contrast, the lower and middle stratigraphic levels of the T4 Upper Sands unit has archaeological sites stratigraphically documenting successive phases of an evolved Acheulian, that were dated as ca. 325 to 200 ka. Notably, these Lower Paleolithic artisans were able to produce tools with different levels of sophistication, simply by applying different strategies. More elaborated reduction sequences were used in case of bifaces, and simpler reduction sequences to obtain cleavers. The differences observed in the lithic assemblages documented at each of these sites can be attributed to a certain degree to particular economic functionalities. But, simultaneously, taking into account the stratigraphic position of these sites and the global technological and typological characteristics of the most relevant tools types (bifaces, cleavers, side-scrapers) we are also impelled to consider the occurrence of local evolutionary chronological trends. In stratigraphic levels at the top deposits of T4, Middle Paleolithic industries have been found and probably date as ca. 165 to 155 ka. In the context of the human settlements of the Middle Pleistocene recognized on the terraces of the Tagus River in Portugal, most of the sites mentioned here in detail, contained in sedimentary deposits of the T4 Terrace and with a chronology of ca. 340 ka to ca. 180 ka, belong to the Lower Paleolithic. The data currently available seem to suggest the possibility of some variability in the lithic industries, if we consider sites with bifaces and hand axes, such as those of Monte Famaco and Vale do Forno (VF1 and VF8), with bifaces, but without axes as in Castelo Velho, to the sites of Fonte da Moita and Ribeira da Ponte da Pedra, where there are industries rich in fine pebbles and rare bifacial pieces. However, it should be pointed out that the specific reality of each of these sites is not comparable with the rest. In fact, this variability is further accentuated when the cave sites of the Almonda spring are introduced into the equation. The correlation of the already known results and the ones to be obtained in the future with the reality of other regions and with other contexts also already identified in the region, as is the case of the recent findings in karst cavities will not fail to enrich the discussion about the variability of the data known.
- 11 November 2017
- Published by Edinburgh University Library in Journal of Lithic Studies
- Vol. 4 (3) , 27-56
Open AccessAs indústrias do Paleolítico Inferior e Médio associadas ao Terraço T4 do Baixo Tejo (Portugal central); Arquivos da mais antiga ocupação humana no oeste da Ibéria, com ca. 340 ka a 155 ka
Because of their geomorphological and sedimentary records, rivers provide relevant archives of palaeoenvironmental change, namely palaeoclimatic and palaeogeographic. Well-dated long-term sedimentary successions sequences are of the most value, with the ages of sedimentary events, included fossils and archaeological materials provided by a range of numerical dating techniques. The Quaternary fluvial archives of the Tejo River in Portugal (the Lower Tejo) can provide important data for studies of landscape and sedimentary evolution, but also of the early human occupation. The present state of art achieved by using methods of geomorphology, lithostratigraphy, sedimentology, archaeology and absolute dating in the study of the Lower Tejo River T4 terrace is here summarized. The Lower Tejo has staircases that comprise a culminant sedimentary unit (the ancestral Tejo River, before the beginning of the fluvial incision stage) and six terraces (T1 to T6) located above the modern alluvial plain, with details as follows: T6 at +7-10 m (above river level), 64-32 ka, with Late Middle Palaeolithic (late Mousterian); T5 at +18-26 m, 136-75 ka, with Middle Palaeolithic industries and Mousterian knapping (Levallois); T4 at +34-48 m, ∼340-155 ka, with Lower Palaeolithic (Early to Late Acheulian) to early Middle Palaeolithic; T3, T2 and T1 do not contain archaeological materials and only from the T3 (+43-78 m) and T1 (+84-164 m) finite absolute ages were obtained. The prehistoric human occupation of this area is of renewed interest because it contains evidence for an extensive Palaeolithic occupation. Related archaeological sites are present on both sides of the river, from the vicinity of the Spanish border (Vila Velha de Ródão; upstream) to the Lisboa area (near the river mouth). This work focuses on the Palaeolithic sites that were found on the T4 terrace, which is made of a basal Lower Gravels unit and an overlying Upper Sands unit. The oldest artefacts previously found in the Lower Gravels unit of the T4 terrace, display crude bifacial forms that can be attributed to the Acheulian, with a probable age of ca. 340 to 325 ka. In contrast, the lower and middle stratigraphic levels of the T4 Upper Sands unit has archaeological sites stratigraphically documenting successive phases of an evolved Acheulian, that were dated as ca. 325 to 200 ka. Notably, these Lower Paleolithic artisans were able to produce tools with different levels of sophistication, simply by applying different strategies. More elaborated reduction sequences were used in case of bifaces, and simpler reduction sequences to obtain cleavers. The differences observed in the lithic assemblages documented at each of these sites can be attributed to a certain degree to particular economic functionalities. But, simultaneously, taking into account the stratigraphic position of these sites and the global technological and typological characteristics of the most relevant tools types (bifaces, cleavers, side-scrapers) we are also impelled to consider the occurrence of local evolutionary chronological trends. In stratigraphic levels at the top deposits of T4, Middle Paleolithic industries have been found and probably date as ca. 165 to 155 ka. In the context of the human settlements of the Middle Pleistocene recognized on the terraces of the Tagus River in Portugal, most of the sites mentioned here in detail, contained in sedimentary deposits of the T4 Terrace and with a chronology of ca. 340 ka to ca. 180 ka, belong to the Lower Paleolithic. The data currently available seem to suggest the possibility of some variability in the lithic industries, if we consider sites with bifaces and hand axes, such as those of Monte Famaco and Vale do Forno (VF1 and VF8), with bifaces, but without axes as in Castelo Velho, to the sites of Fonte da Moita and Ribeira da Ponte da Pedra, where there are industries rich in fine pebbles and rare bifacial pieces. However, it should be pointed out that the specific reality of each of these sites is not comparable with the rest. In fact, this variability is further accentuated when the cave sites of the Almonda spring are introduced into the equation. The correlation of the already known results and the ones to be obtained in the future with the reality of other regions and with other contexts also already identified in the region, as is the case of the recent findings in karst cavities will not fail to enrich the discussion about the variability of the data known.
- Open Access
- 30 June 2017
- Published by CEGOT - Center of Studies on Geography and Spatial Planning in GOT - Journal of Geography and Spatial Planning
- Vol. 1 (11) , 83-97
Espacialidades e ressonâncias do patrimônio cultural: reflexões sobre identidade e pertencimento
Espacialidades e ressonâncias do patrimônio cultural: reflexões sobre identidade e pertencimento
- 30 June 2017
- Published by CEGOT - Center of Studies on Geography and Spatial Planning in GOT - Journal of Geography and Spatial Planning
- Vol. 1 (11) , 83-97
Open AccessEspacialidades e ressonâncias do patrimônio cultural: reflexões sobre identidade e pertencimento
Espacialidades e ressonâncias do patrimônio cultural: reflexões sobre identidade e pertencimento
- Open Access
- 15 March 2017
- Published by Edinburgh University Library in Journal of Lithic Studies
- Vol. 4 (1)
Quartzite pebble technology in the final Middle Pleistocene of the Ribeira da Ponte da Pedra site (High Ribatejo, Central Portugal)
The lithic assemblage of Ribeira da Ponte da Pedra site (OIS8-9) was produced, almost exclusively, through the exploitation of good quality quartzite fluvial pebbles with a regular morphology. Quartzite fluvial pebbles are the most common raw material found in the Middle Pleistocene occupation sites in Portugal. Such feature results from the easy availability of these pebbles in the valleys where the great majority of the archaeological sites within this chronology are located, and also because of the quartzite’s physical properties and suitability for knapping. In a techno-typological point of view, its lithic assemblage is characterized by the application of two main reduction sequences that result in abundant worked pebbles, retouched pebbles, cortical and semi-cortical flakes, retouched flakes, a few cores and rare bifacial artefacts. Some artefacts present irregular and variable edge modifications described as ‘atypical’ edge modifications that could edge damage resultant from their utilization. From a strictly technical point of view the assemblage can be described as quite simple, however we can envisage an inherent complexity starting in an accurate selection and exploitation of the quartzite pebbles, whose regular morphology allows a ‘predetermined’ production of regular blanks through simple actions. In order to better understand patterns of raw material selection and technical schemes adopted in the exploitation of the quartzite pebbles we compared a sample of pebbles collected in the same deposits identified in the site (t4 fluvial terrace deposits) with worked pebbles that have 1 or 2 removals that had not altered significantly the original morpho-volumetry of the pebbles. The goal of this comparison was to verify if there was a selection of the fluvial pebbles based on texture and morpho-volumetry and if so, relate such selection with the technical schemes identified by technological study of the assemblage.
- 15 March 2017
- Published by Edinburgh University Library in Journal of Lithic Studies
- Vol. 4 (1)
Open AccessQuartzite pebble technology in the final Middle Pleistocene of the Ribeira da Ponte da Pedra site (High Ribatejo, Central Portugal)
The lithic assemblage of Ribeira da Ponte da Pedra site (OIS8-9) was produced, almost exclusively, through the exploitation of good quality quartzite fluvial pebbles with a regular morphology. Quartzite fluvial pebbles are the most common raw material found in the Middle Pleistocene occupation sites in Portugal. Such feature results from the easy availability of these pebbles in the valleys where the great majority of the archaeological sites within this chronology are located, and also because of the quartzite’s physical properties and suitability for knapping. In a techno-typological point of view, its lithic assemblage is characterized by the application of two main reduction sequences that result in abundant worked pebbles, retouched pebbles, cortical and semi-cortical flakes, retouched flakes, a few cores and rare bifacial artefacts. Some artefacts present irregular and variable edge modifications described as ‘atypical’ edge modifications that could edge damage resultant from their utilization. From a strictly technical point of view the assemblage can be described as quite simple, however we can envisage an inherent complexity starting in an accurate selection and exploitation of the quartzite pebbles, whose regular morphology allows a ‘predetermined’ production of regular blanks through simple actions. In order to better understand patterns of raw material selection and technical schemes adopted in the exploitation of the quartzite pebbles we compared a sample of pebbles collected in the same deposits identified in the site (t4 fluvial terrace deposits) with worked pebbles that have 1 or 2 removals that had not altered significantly the original morpho-volumetry of the pebbles. The goal of this comparison was to verify if there was a selection of the fluvial pebbles based on texture and morpho-volumetry and if so, relate such selection with the technical schemes identified by technological study of the assemblage.
- Open Access
- 15 March 2017
- Published by Edinburgh University Library in Journal of Lithic Studies
- Vol. 4 (1)
Introduction: Beyond the reduction sequence and new insights in lithic technology
The proceedings of the B23 Session held during the XVII UISPP/IUPPS conference (1-7 September 2014, Burgos, Spain) are published in this issue of the Journal of Lithic Studies. The title of the session, "Beyond the reduction sequence: new insights in lithic technology", aimed to increase awareness about current methods in studies on stone assemblages.
- 15 March 2017
- Published by Edinburgh University Library in Journal of Lithic Studies
- Vol. 4 (1)
Open AccessIntroduction: Beyond the reduction sequence and new insights in lithic technology
The proceedings of the B23 Session held during the XVII UISPP/IUPPS conference (1-7 September 2014, Burgos, Spain) are published in this issue of the Journal of Lithic Studies. The title of the session, "Beyond the reduction sequence: new insights in lithic technology", aimed to increase awareness about current methods in studies on stone assemblages.
- Open Access
- 15 September 2016
- Published by Edinburgh University Library in Journal of Lithic Studies
- Vol. 3 (2) , 29-52
Use wear analysis of quartzite lithic implements from the Middle Palaeolithic site of Lagoa do Bando (Central Portugal)
The Middle Palaeolithic site of Lagoa do Bando is an open air site in a lacustrian context located at 570 m a.s.l. in the municipality of Mação in the center of Portugal. The site was discovered in 2011, during an emergency excavation, and resulted on the recovery of a Middle Palaeolithic lithic assemblage mainly composed of fine grained quartzite implements of expedient, discoid and Levallois technology. Use wear analysis was conducted on 41 artifacts formed through discoid and Levallois technology. Twenty one of these artifacts revealed use wear traces. Ten of them show traces of wood work, five have traces of butchering activities, three present traces of meat processing and two present undetermined traces. The site is located at an atypically high elevation for an open air site and there is evidence of a high rate of woodworking activity, rare in the Middle Palaeolithic occupations. The woodworking activities are possibly linked to the exploitation of woody local resources (maybe for the construction of hunting blinds) and not only with to the manufacture and maintenance of spears and shafts. These results converge with the interpretation of this site as a temporary hunting site integrated in a complex pattern of occupation of the area between the river valleys and the top of low mountains.
- 15 September 2016
- Published by Edinburgh University Library in Journal of Lithic Studies
- Vol. 3 (2) , 29-52
Open AccessUse wear analysis of quartzite lithic implements from the Middle Palaeolithic site of Lagoa do Bando (Central Portugal)
The Middle Palaeolithic site of Lagoa do Bando is an open air site in a lacustrian context located at 570 m a.s.l. in the municipality of Mação in the center of Portugal. The site was discovered in 2011, during an emergency excavation, and resulted on the recovery of a Middle Palaeolithic lithic assemblage mainly composed of fine grained quartzite implements of expedient, discoid and Levallois technology. Use wear analysis was conducted on 41 artifacts formed through discoid and Levallois technology. Twenty one of these artifacts revealed use wear traces. Ten of them show traces of wood work, five have traces of butchering activities, three present traces of meat processing and two present undetermined traces. The site is located at an atypically high elevation for an open air site and there is evidence of a high rate of woodworking activity, rare in the Middle Palaeolithic occupations. The woodworking activities are possibly linked to the exploitation of woody local resources (maybe for the construction of hunting blinds) and not only with to the manufacture and maintenance of spears and shafts. These results converge with the interpretation of this site as a temporary hunting site integrated in a complex pattern of occupation of the area between the river valleys and the top of low mountains.