HHHengyi He

Hengyi He

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hengyi He has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Flexible gas-sealing optimization and leakage prevention mechanism in gob-side entry retaining: An innovative gas control method

    by Haowen Zhou, Baisheng Nie, Bozhi Deng, Xiaofeng Xia, Feng Qin, Chao Ma, Hao Zhang, Hengyi He, Song Bao, Fangfang Hu, et al.

    In Y-type ventilation systems, sealing walls are prone to crack development under mining pressure, allowing gas to migrate from the goaf into the gob-side entry retaining, creating serious gas accidents. This study proposes a novel flexible gas-sealing technology for gob-side entry retaining applications. Based on this, the interactive effects of three factors—air distribution ratio, airbag width, and airbag thickness—on gas concentration in the gob-side entry retaining were analyzed using a combination of design of experiments, response surface methodology, and computational fluid dynamics (CFD) simulation. The technique parameters were then optimized, and the mechanism by which the flexible airbag influences gas leakage has been elucidated. Finally, the effectiveness of the proposed method was validated through a field test. The results showed that airbag width and thickness had a more significant impact on the gas concentration compared with the air distribution ratio, and strong nonlinear interactions were observed among the three factors. The optimal parameters derived from the response surface optimization were an air distribution ratio of 5:1, an airbag width of 3.414 m, and a thickness of 0.587 m. The airbag alleviated the pressure gradient in the goaf, reduced leakage from the coal face, and increased wind pressure in the gob-side entry retaining, thereby weakening methane leakage intensity. Field tests demonstrated good performance, reducing gas concentration to 0.1%–0.15%, increasing airflow velocity to 2.46, m/s, and decreasing the resistance per 100 m and friction resistance coefficient to 0.009 and 0.012 N·s2/m4, respectively.


  • Micromechanical property evolution and damage mechanism of coal subjected to ScCO2 treatment

    by Hengyi He, Peng Liu, Baisheng Nie, Yulong Zhao, Lei Wang, Xianfeng Liu, Bozhi Deng, Zhengduo Zhao, Hao Zhang, Dan Zhao, et al.


  • Open Access

    Research on Macro-Micro Failure Mechanism of Interbedded Sandstone in the Deep of Lannigou Gold Mine

    by Lulin Zheng, Hengyi He, Yujun Zuo, Hao Liu, Xiaorong Liu, Qing Qiu

    The surrounding rock of the Lannigou gold mine roadway is mainly sandstone, most of which contains thin interlayers of argillaceous and carbonaceous minerals. To explore the deformation and failure mechanism of interbedded sandstones under static load caused by surrounding rock stress, the macroscopic failure modes, macroscopic physical properties, and microscopic fracture surface characteristics of sandstones were studied from different inclination angles. Triaxial compression tests and scanning electron microscopy tests were conducted. The results show that the peak strength of the specimen changes in a “spoon”-shaped pattern with increasing inclination. With increasing confining pressure, the peak strength, peak strain, residual strength, and elastic modulus of specimens increase, which damages interlayers. The macroscopic failure mode is mainly affected by the interlayer without confining pressure, and both tensile-shear failure (0° and 90°) and composite failure (30° and 60°) occur. Under higher confining pressure, the effect of the interlayer is smaller, and the specimen shows shear-tensile failure (0°, 30°, 60°, and 90°). Furthermore, the propagation mode of microcracks and the microscopic failure mode of mineral crystals differ for different macroscopic failure modes. In this study, the microscopic mechanism of macroscopic failure of interbedded sandstone was identified, which is significant for practical engineering guidance.