Fatiha Barka-Bouaifel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Fatiha Barka-Bouaifel has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Rabah Boukherroub
Univ. Lille, CNRS, Univ. Polytechnique Hauts-de-France, UMR 8520, IEMN, Lille F-59000, France
7 shared publications - Sabine Szunerits
University of Lille
4 shared publications Brigitte Sieber
3 shared publicationsLuc Boussekey
3 shared publications- Nacer Bezzi
Laboratoire de Technologie des Matériaux et de Génie des Procédés (LTMGP), Université Abderrahmane Mira de Bejaia, Targa Ouzemour, 06000 Béjaia, Algérie
3 shared publications Ahmed Addad
2 shared publications
Latest Publications
- 1 March 2016
- Published by Elsevier in Superlattices and Microstructures
- Vol. 91, 225-237
Preparation and characterization of Ni-doped ZnO–SnO2 nanocomposites: Application in photocatalysis
- 1 March 2016
- Published by Elsevier in Superlattices and Microstructures
- Vol. 91, 225-237
Preparation and characterization of Ni-doped ZnO–SnO2 nanocomposites: Application in photocatalysis
- 1 November 2015
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 457, 360-369
Hydrothermal synthesis, phase structure, optical and photocatalytic properties of Zn2SnO4 nanoparticles
- 1 November 2015
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 457, 360-369
Hydrothermal synthesis, phase structure, optical and photocatalytic properties of Zn2SnO4 nanoparticles
- 16 January 2014
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 6 (8) , 5422-5431
Graphene-Coated Surface Plasmon Resonance Interfaces for Studying the Interactions between Bacteria and Surfaces
A variety of physical and chemical parameters are of importance for adhesion of bacteria to surfaces. In the colonization of mammalian organisms for example, bacterial fimbriae and their adhesins not only seek particular glycan sequences exposed on diverse epithelial linings, they also enable the bacteria to overcome electrostatic repulsion exerted by their selected surfaces. In this work, we present a new technique based on simplified model systems for studying the adhesion strength of different Escherichia coli strains. For this purpose, gold-based surface plasmon resonance (SPR) interfaces were coated with thin films of reduced graphene oxide (rGO) through electrophoretic deposition. The rGO matrix was post-modified with polyethyleneimine (PEI), poly(sodium 4-styrenesulfonate) (PSS), mannose, and lactose through π-stacking and/or electrostatic interactions by simple immersion of the SPR interface into their respective aqueous solutions. The adhesion behaviors of one uropathogenic and two enterotoxigenic Escherichia coli clinical isolates, that each express structurally characterized fimbrial adhesins, were investigated. It was found that the UTI89 cystitis isolate that carries the mannose-binding FimH adhesin was most attracted to the PEI- and mannose-modified surfaces, whereas the att25 diarrhoeal strain with the N-acetylglucosamine-specific F17a-G adhesin disintegrated the lactose-modified rGO. The highly virulent 107/86 strain interacted strongly with the PSS-modified graphene oxide, in agreement with the polybasic surroundings of the ABH blood group-binding site of the FedF adhesin, and showed a linear SPR response in a concentration range between 1 × 102 and 1 × 109 cfu/mL.
- 16 January 2014
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 6 (8) , 5422-5431
Graphene-Coated Surface Plasmon Resonance Interfaces for Studying the Interactions between Bacteria and Surfaces
A variety of physical and chemical parameters are of importance for adhesion of bacteria to surfaces. In the colonization of mammalian organisms for example, bacterial fimbriae and their adhesins not only seek particular glycan sequences exposed on diverse epithelial linings, they also enable the bacteria to overcome electrostatic repulsion exerted by their selected surfaces. In this work, we present a new technique based on simplified model systems for studying the adhesion strength of different Escherichia coli strains. For this purpose, gold-based surface plasmon resonance (SPR) interfaces were coated with thin films of reduced graphene oxide (rGO) through electrophoretic deposition. The rGO matrix was post-modified with polyethyleneimine (PEI), poly(sodium 4-styrenesulfonate) (PSS), mannose, and lactose through π-stacking and/or electrostatic interactions by simple immersion of the SPR interface into their respective aqueous solutions. The adhesion behaviors of one uropathogenic and two enterotoxigenic Escherichia coli clinical isolates, that each express structurally characterized fimbrial adhesins, were investigated. It was found that the UTI89 cystitis isolate that carries the mannose-binding FimH adhesin was most attracted to the PEI- and mannose-modified surfaces, whereas the att25 diarrhoeal strain with the N-acetylglucosamine-specific F17a-G adhesin disintegrated the lactose-modified rGO. The highly virulent 107/86 strain interacted strongly with the PSS-modified graphene oxide, in agreement with the polybasic surroundings of the ABH blood group-binding site of the FedF adhesin, and showed a linear SPR response in a concentration range between 1 × 102 and 1 × 109 cfu/mL.
- 22 October 2012
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 2 (32) , 12482-12488
Preparation and photocatalytic properties of quartz/gold nanostructures/TiO2 lamellar structures
A novel class of visible light activated titanium oxide (TiO2) photocatalytic surfaces were prepared by depositing gold nanostructures (Au NSs) onto quartz substrates and subsequent coating with 20–200 nm thick TiO2 thin films. The Au NSs were obtained by thermal evaporation and post-annealing of 4 nm thick gold films, while the TiO2 thin layers were deposited using reactive magnetron sputtering. The resulting interfaces were characterized using scanning electron microscopy (SEM) and UV-vis absorption spectroscopy. UV-vis spectra showed strong absorption peaks between 570 and 680 nm due to the plasmonic response of the lamellar structure. The photocatalytic activity of the interfaces for the oxidative degradation of rhodamine B was evaluated under ultraviolet and visible light illumination. The interface coated with 100 nm TiO2 exhibited pronounced photocatalytic activity under UV light irradiation compared to substrates with thinner or thicker TiO2 films or without TiO2 coating. A quartz/Au NSs/100 nm TiO2 interface showed higher photocatalytic activity compared to quartz/100 nm TiO2, while retarded photodegradation of rhodamine B is observed with quartz/Au NSs coated with thinner or thicker TiO2 films. The results clearly highlight the positive effect of the Au NSs on the performance of thin TiO2 photocatalysts. Furthermore, the deposition of TiO2 on top of Au NSs improves the poor stability encountered in TiO2/Au NSs photocatalytic systems.
- 22 October 2012
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 2 (32) , 12482-12488
Preparation and photocatalytic properties of quartz/gold nanostructures/TiO2 lamellar structures
A novel class of visible light activated titanium oxide (TiO2) photocatalytic surfaces were prepared by depositing gold nanostructures (Au NSs) onto quartz substrates and subsequent coating with 20–200 nm thick TiO2 thin films. The Au NSs were obtained by thermal evaporation and post-annealing of 4 nm thick gold films, while the TiO2 thin layers were deposited using reactive magnetron sputtering. The resulting interfaces were characterized using scanning electron microscopy (SEM) and UV-vis absorption spectroscopy. UV-vis spectra showed strong absorption peaks between 570 and 680 nm due to the plasmonic response of the lamellar structure. The photocatalytic activity of the interfaces for the oxidative degradation of rhodamine B was evaluated under ultraviolet and visible light illumination. The interface coated with 100 nm TiO2 exhibited pronounced photocatalytic activity under UV light irradiation compared to substrates with thinner or thicker TiO2 films or without TiO2 coating. A quartz/Au NSs/100 nm TiO2 interface showed higher photocatalytic activity compared to quartz/100 nm TiO2, while retarded photodegradation of rhodamine B is observed with quartz/Au NSs coated with thinner or thicker TiO2 films. The results clearly highlight the positive effect of the Au NSs on the performance of thin TiO2 photocatalysts. Furthermore, the deposition of TiO2 on top of Au NSs improves the poor stability encountered in TiO2/Au NSs photocatalytic systems.
- 12 September 2012
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry
- Vol. 22 (43) , 22922-22928
Vertical arrays of SiNWs–ZnO nanostructures as high performance electron field emitters
Multicomponent hybrid materials of nanostructured building blocks are essential for the development of complex devices and advanced applications due to their role as either functional or interconnecting elements. This study introduces a simple and cost effective strategy for the synthesis of vertical arrays of silicon nanowires and ZnO nanostructures (nanorod and multipod structures). Formation of vertical nanostructured arrays is confirmed by SEM and HRTEM imaging as well as XRD and Raman measurements. We have investigated field emission properties of the as-synthesized vertical nanostructured arrays. Our results show that these SiNWs–ZnO nanostructures are highly efficient and stable field emitters.
- 12 September 2012
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry
- Vol. 22 (43) , 22922-22928
Vertical arrays of SiNWs–ZnO nanostructures as high performance electron field emitters
Multicomponent hybrid materials of nanostructured building blocks are essential for the development of complex devices and advanced applications due to their role as either functional or interconnecting elements. This study introduces a simple and cost effective strategy for the synthesis of vertical arrays of silicon nanowires and ZnO nanostructures (nanorod and multipod structures). Formation of vertical nanostructured arrays is confirmed by SEM and HRTEM imaging as well as XRD and Raman measurements. We have investigated field emission properties of the as-synthesized vertical nanostructured arrays. Our results show that these SiNWs–ZnO nanostructures are highly efficient and stable field emitters.
- 16 June 2011
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry
- Vol. 21 (29) , 10982-10989
Synthesis and photocatalytic activity of iodine-doped ZnO nanoflowers
The paper reports on the preparation and photocatalytic activity of thin films of iodine-doped ZnO nanoflowers deposited on glass substrate using a simple growth process based on hydrothermal synthesis. Addition of iodic acid (5–20 vol%) in the reaction mixture allows the introduction of iodine ions in the form of I− or IO3 − in the ZnO lattice, as suggested by X-ray photoelectron spectroscopy. Doping ZnO nanostructured films with iodine did not impact their morphology, while it has a significant influence on their optical properties. Indeed, the nanostructured ZnO films, prepared in the presence of iodic acid, display a large increase of the visible luminescence, which reaches a maximum at a concentration of 10 vol%. Finally, the photocatalytic activity of the ZnO nanostructured films for the photodegradation of a model pollutant, rhodamine B, was evaluated under UV and visible light irradiation. While under UV light irradiation, both undoped and iodine-doped ZnO films show a similar behavior, the photocatalytic performance of iodine-doped under visible light irradiation is significantly enhanced in comparison to that of undoped ZnO.
- 16 June 2011
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry
- Vol. 21 (29) , 10982-10989
Synthesis and photocatalytic activity of iodine-doped ZnO nanoflowers
The paper reports on the preparation and photocatalytic activity of thin films of iodine-doped ZnO nanoflowers deposited on glass substrate using a simple growth process based on hydrothermal synthesis. Addition of iodic acid (5–20 vol%) in the reaction mixture allows the introduction of iodine ions in the form of I− or IO3 − in the ZnO lattice, as suggested by X-ray photoelectron spectroscopy. Doping ZnO nanostructured films with iodine did not impact their morphology, while it has a significant influence on their optical properties. Indeed, the nanostructured ZnO films, prepared in the presence of iodic acid, display a large increase of the visible luminescence, which reaches a maximum at a concentration of 10 vol%. Finally, the photocatalytic activity of the ZnO nanostructured films for the photodegradation of a model pollutant, rhodamine B, was evaluated under UV and visible light irradiation. While under UV light irradiation, both undoped and iodine-doped ZnO films show a similar behavior, the photocatalytic performance of iodine-doped under visible light irradiation is significantly enhanced in comparison to that of undoped ZnO.
- 12 January 2011
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry
- Vol. 21 (9) , 3006-3013
Optical and electrochemical properties of tunable host–guest complexes linked to plasmonic interfaces
This article describes the use of localized surface plasmon resonance (LSPR) interface to detect complexation/decomplexation steps of a controllable host–guest system at the solid–liquid interface. The LSPR interfaces consist of a sandwiched structure comprising a tin-doped indium oxide (ITO) substrate, gold nanostructures (Au NSs) and a thin ITO film overcoating. “Click” chemistry was used to covalently link an alkyne-functionalized π-electron deficient tetracationic cyclophane cyclobis(paraquat-p-phenylene) (CBPQT4+) unit to an azide-terminated LSPR interface. The modified interfaces were characterized using X-ray photoelectron spectroscopy (XPS), cyclic voltammetry and UV-vis transmission spectroscopy. Tetrathiafulvalene (TTF) was used as a model guest molecule to demonstrate the possibility to follow the complexation/decomplexation events by monitoring the change in the LSPR signal. The results demonstrate that redox controlled host–guest complexation at the surface can be monitored effectively using LSPR.
- 12 January 2011
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry
- Vol. 21 (9) , 3006-3013
Optical and electrochemical properties of tunable host–guest complexes linked to plasmonic interfaces
This article describes the use of localized surface plasmon resonance (LSPR) interface to detect complexation/decomplexation steps of a controllable host–guest system at the solid–liquid interface. The LSPR interfaces consist of a sandwiched structure comprising a tin-doped indium oxide (ITO) substrate, gold nanostructures (Au NSs) and a thin ITO film overcoating. “Click” chemistry was used to covalently link an alkyne-functionalized π-electron deficient tetracationic cyclophane cyclobis(paraquat-p-phenylene) (CBPQT4+) unit to an azide-terminated LSPR interface. The modified interfaces were characterized using X-ray photoelectron spectroscopy (XPS), cyclic voltammetry and UV-vis transmission spectroscopy. Tetrathiafulvalene (TTF) was used as a model guest molecule to demonstrate the possibility to follow the complexation/decomplexation events by monitoring the change in the LSPR signal. The results demonstrate that redox controlled host–guest complexation at the surface can be monitored effectively using LSPR.