YTYicun Tang

Yicun Tang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yicun Tang has a total of 17 co-authors. Here are the top co-authors by number of shared publications:

  • Jingchun Min

    Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Engineering Mechanics, Tsinghua University

    2 shared publications
  • Tingfang Yu

    School of Advanced Manufacturing, Nanchang University

    2 shared publications
  • Tingfang Yu

    Nanchang University School of Advanced Manufacturing Jiangxi 330031 , China

    2 shared publications
  • Genli Zhang

    Nanchang University School of Advanced Manufacturing Jiangxi 330031 , China

    1 shared publication
  • Guohua Long

    Electric Power Research Institute of State Grid Jiangxi Electric Power Co., Ltd. , Nanchang

    1 shared publication
  • Jiapeng Zhou

    Nanchang University School of Advanced Manufacturing Jiangxi 330031 , China

    1 shared publication

Latest Publications

  • Multi-physics coupled simulation of a 110 kV three-phase gas-insulated switchgear busbar and its temperature-rise prediction based on machine learning

    by Yiming Du, Tao Han, Mengying Cheng, Guohua Long, Yicun Tang

    Purpose: The purpose of this study is to investigate the temperature distribution of a 110 kV three-phase gas-insulated switchgear (GIS) busbar by multi-physics coupled numerical simulation. This study analyses the influences of different factors on the temperature field of the busbar. The study aims to provide an efficient formula to predict the temperature rise of the contact area based on the numerical results through machine learning. The findings can be used for the over-temperature warning of the hot spot in the GIS busbar equipment. Design/methodology/approach: A multi-physics coupled numerical simulation is performed in the ANSYS software, which aims to study the effects of different factors, such as the contact resistance, solar radiation and ambient temperature, on the temperature field of the busbar. Based on the data set from the simulation, an empirical formula is fitted to quickly predict the contact temperature. In addition, the Random Forest (RF) algorithm is used for the training of the obtained temperature data set, which is used for the over-temperature prediction. Findings: The results reveal that the temperature of the contact area is mainly affected by the contact resistance, while the temperature of the GIS enclosure is more sensitive to the solar radiation and the ambient temperature. The fitted empirical formula can quickly predict the contact temperature, which has a prediction accuracy of 0.97°C. The temperature prediction accuracy by machine learning is better, which is 0.0165°C. Originality/value: This study provides an original investigation into the temperature rise prediction of the contact area in a GIS busbar through multi-physics coupled simulation and machine learning, which is scarcely addressed in previous studies. By systematically considering different influencing factors, this work offers a quick estimation of the inner temperature of the contact area, which provides efficient and valuable guidelines for the over-temperature warning of the GIS equipment.

  • Numerical study on the convective drying characteristics of a gas diffusion layer with gradient porosity and mixed wettability distribution using pore network approach

    by Tingfang Yu, Xinxin Shu, Mingzhu Wang, Yicun Tang, Jingchun Min

    1. Proton Exchange Membrane Fuel Cells (PEMFCs) have a multitude of advantages, such as low operating temperature (60–95 °C), quick launch, high specific power, non-pollution emission, and long lif...

  • Numerical investigations of heat transfer augmentation in a microchannel heat sink with different shaped periodic reentrant cavities on channel sidewalls

    by Tingfang Yu, Xing Guo, Yicun Tang

    Microchannel heat sink is widely applied in high-density heat flux devices for its high efficiency in heat dissipation. However, the most effective geometrical configuration of microchannels for best heat transfer augmentation with least pump power penalty is still unknown. In this research, the heat transfer augmentation in a microchannel heat sink with different shaped periodic reentrant cavities on channel sidewalls are numerically studied. Three different kinds of channel structures are introduced, including convex quarter-circular, concave quarter-circular, and inclined shaped reentrant cavities. The comprehensive performances of the proposed microchannels are compared with that of the smooth straight channel, with respect to the pressure drop, friction coefficient, Nusselt number, and performance factor. The results indicate that the comprehensive performance of the microchannel heat sink with periodic reentrant cavities is superior to the smooth straight channel, because its reentrant cavities can strengthen the mixing of fluids and lower the pressure loss. The proposed microchannels can enhance the heat transfer by 1.7 times, reduce the pressure drop by 3.7%–22.4% at Re 648.2, with the heat transfer entropy production decreased by 15.9%–48.2%. The inclined shaped microchannel has the best overall performance factor among the three proposed channels, which achieves up to 1.59 at Re 648.2.


  • Performance Analysis and Optimization of Supercritical CO2 Recompression Brayton Cycle Coupled With Organic Flash Cycle With a Two-Phase Expander

    by Tingfang Yu, Genli Zhang, Jiapeng Zhou, Yicun Tang

    In this work, a combined SCRBC/OFCT system is proposed to improve the thermal efficiency of the supercritical CO2 recompression Brayton cycle (SCRBC), which utilizes a two-phase expander to replace the high-pressure throttling valve of a basic organic flash cycle (OFC). In addition, the organic flash cycle with a two-phase expander (OFCT) is coupled at the waste heat end of the SCRBC as the bottom cycle for the use of waste heat at low temperatures. A comprehensive comparison is carried out for different organic working fluids, including the R123, R245fa, R142B, R236ea, and R600, regarding the thermal performance, environmental effect, and safety levels. Furthermore, influences of various factors on the thermal performance of the combined SCRBC/OFCT cycle are also examined, including the top cycle pressure ratio, top cycle turbine inlet temperature, mass flow rate ratio, evaporation temperature, and the condenser's pinch point temperature difference. A multi-objective optimization approach is employed on the combined SCRBC/OFCT system, which considers both the thermal efficiency and the specific investment cost as the objective function, and the optimization procedure is implemented through the NSGA-II algorithm. The Pareto solution set and the compromise solution is finally obtained. The results indicate that the optimized combined SCRBC/OFCT system can improve the thermal efficiency by 11.75% and 9.70% when compared with the SCRBC and SCRBC/OFC, respectively.


  • MODELING AND SIMULATIONS OF WET POROUS MEDIUM CONVECTIVE DRYING

    by Yicun Tang, Yuan Zhang, Jingchun Min

    In the convective drying of a wet porous medium by hot air, the medium surface exposed to the air fluid may experience three stages, namely the fully wet, partly wet, and fully dry stages. At the fully wet stage, the medium surface is fully covered by a water film, with the convective moisture transfer taking place all over the medium surface; at the partly wet stage, the medium surface is partly covered by water film, with the convective moisture transfer occurring only at the wet surface where free water is present. In this research, a theoretical model is presented to simulate the convective drying of a wet porous medium, and experiments on hot-air convective drying of a wet porous sand layer are carried out to investigate the sand-layer temperature and water content variations during the drying, in which the sand layer thickness is 4 mm, the initial water-film thickness is 0.4 mm, and the hot-air temperatures are 45, 60, and 75°C, respectively. Inverse calculations are conducted to get some insight into the water-film coverage function based on the experimental data, which are necessary for quantitatively evaluating the effective moisture transfer surface area when calculating the convective moisture transfer at the partly wet stage. By combining the coverage function with the wet porous medium drying model, a comprehensive model is obtained. Calculations are implemented to simulate the convective drying of the wet porous sand layer, and the effects of the two constants included in that function on the wet sand-layer drying characteristics are discussed. The calculation results are compared with the experimental data; they agree very well, supporting the effectiveness of the current model in simulating the sand-layer convective drying process.


  • Open Access

    Numerical Investigation of Fluid Flow and Heat Transfer in High-Temperature Wavy Microchannels with Different Shaped Fins Cooled by Liquid Metal

    by Tingfang Yu, Xing Guo, Yicun Tang, Xuan Zhang, Lizhi Wang, Tao Wu

    The microchannel heat sink has been recognized as an excellent solution in high-density heat flux devices for its high efficiency in heat removal with limited spaces; however, the most effective structure of microchannels for heat dissipation is still unknown. In this study, the fluid flow and heat transfer in high-temperature wavy microchannels with various shaped fins, including the bare wavy channel, and the wavy channel with circular, square, and diamond-shaped fins, are numerically investigated. The liquid metal-cooled characteristics of the proposed microchannels are compared with that of the smooth straight channel, with respect to the pressure drop, average Nusselt number, and overall performance factor. The results indicate that the wavy structure and fin shape have a significant effect on the heat sink performance. Heat transfer augmentation is observed in the wavy channels, especially coupled with different shaped fins; however, a large penalty of pressure drops is also found in these channels. The diamond-shaped fins yield the best heat transfer augmentation but the worst pumping performance, followed by the square-, and circular-shaped fins. When the Re number increases from 117 to 410, the Nu number increases by 61.7% for the diamond fins, while the ∆p increases as much as 7.5 times.