KOKevin Ohneiser

Kevin Ohneiser

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kevin Ohneiser has a total of 193 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Validation of EarthCARE/ATLID aerosol profiling products with ground-based PollyNET lidars – case studies

    by Holger Baars, Moritz Haarig, Leonard König, Athena A. Floutsi, Elizaveta Basharova, Julian Hofer, Henriette Gebauer, Ronny Engelmann, Dietrich Althausen, Annett Skupin, et al.

    The satellite mission EarthCARE (Earth Cloud, Aerosol, and Radiation Explorer) of the European Space Agency (ESA) and the Japan Aerospace Exploration Agency (JAXA) was successfully launched in May 2024. The satellite has four instruments on board, namely a high-spectral-resolution lidar called ATLID, a Cloud Profiling Doppler Radar (CPR), a Multi-Spectral Imager (MSI), and a Broad-Band Radiometer (BBR). ATLID provides for the first time directly measured profiles of the extinction and backscatter coefficient (and thus lidar ratio) together with the depolarization ratio at 355 nm from space. Since the start of the measurements, several updates in the ESA’s processing chain have been made resulting in different baselines of the products. A first homogenized data set for the entire mission duration processed with one algorithm version, namely Baseline BA, was accomplished in September 2025. We used ground-based multiwavelength-Raman-polarization lidars of PollyNET operating in the framework of the Aerosol, Clouds and Trace gases Research Infrastructure (ACTRIS) to discuss the quality of ATLID profiling products based on golden case studies. The PollyNET lidars measure the same geophysical parameter as EarthCARE, namely profiles of the particle backscatter coefficient, the particle extinction coefficient, and the particle linear depolarization ratio at 355 nm. Seven dedicated cases, for which EarthCARE and the ground-based reference system observed the same atmospheric scene, were selected, spanning several atmospheric conditions (ice clouds, high aerosol load, pristine conditions) and geographic locations (Tropical Atlantic, Europe, Central Asia, and the pristine Southern Hemisphere). Our investigations revealed that ATLID has remarkable profiling capabilities with good signal strength and high vertical resolution. The ATLID profiling product of ESA’s processing chain, A-EBD, could resolve the vertical structure of the targeted atmospheric features very well so that the A-EBD backscatter and extinction profiles (at low resolution) matched qualitatively (and mostly quantitatively) with the ground-based reference observations for most investigated atmospheric conditions. The intensive particle quantity lidar ratio is retrieved layer-wise and thus not in the same resolution as the backscatter and extinction products. It matches in many cases with the ground-based reference, but we also detected occasions when the lidar ratio in certain atmospheric regions was significantly deviating from the reference, which then affects either the extinction or backscatter coefficient values. Especially edge effects at the transition of particle layers to clean air seem to be problematic. Concerning ATLID’s depolarization ratio, fair agreement was found for strongly scattering and depolarizing features, like ice clouds – especially during nighttime. For the aerosol regime, however, we confirm significant deviations from the ground reference and consider the depolarization ratio in Baselines BA and BB as quantitatively not reliable, especially during daytime. Thus, ATLID’s depolarization ratio of Baselines B can be used to discriminate but not to type atmospheric features. In conclusion, we can state that ATLID’s optical profiles of Baselines B are ready for scientific exploitation keeping in mind the reported drawbacks (e.g., depolarization ratio offsets, edge effects, occasional retrieval errors, non-complete quality flags). EarthCARE data should therefore be intensively quality checked before using for scientific studies. As EarthCARE’s lifetime was recently foreseen to last for more than 10 years and algorithm development continues, such validation efforts stay important and complement other respective validation approaches.


  • Open Access

    Evaluation of the Vertical Distribution of Particle Shape (VDPS) method with in situ measurements and assessment of the impact of non-Rayleigh scattering

    by Audrey Teisseire, Patric Seifert, Kevin Ohneiser, Maximilian Maahn, Robert Spirig, Jan Henneberger

    In this study, the vertical distribution of particle shape (VDPS) method for retrieval of the vertical distribution of particle shapes and the identification of riming and aggregation processes is evaluated through comparison with in-situ measurements and co-located multi-frequency radar observations collected during the CLOUDLAB campaign in Eriswil, Switzerland. Additionally, a novel aspect of the VDPS method is introduced, enabling the derivation of the polarizability ratio using slanted-mode linear depolarization ratio (SLDR) calculated from the main peaks of the Doppler spectra of the signal-to-noise ratio (SNR) from the co- and cross-polarized channels, respectively. This enhancement allows for the detection of secondary ice production and the coexistence of multiple hydrometeor types, which would stay undetected when the retrieval is only applied to the main peak of the Doppler spectrum in the co-channel. Finally, the susceptibility of the VDPS method to the effects of non-Rayleigh scattering (particle sizes close or larger than the radar wavelength) is examined. The obtained results were found to demonstrate the potential of the VDPS method using a Ka-band scanning cloud radar in SLDR mode for operational hydrometeor classification, even under non-Rayleigh scattering conditions.

  • Open Access

    Comment on egusphere-2026-1490

    by Holger Baars, Moritz Haarig, Leonard König, Athena A. Floutsi, Elizaveta Basharova, Julian Hofer, Henriette Gebauer, Ronny Engelmann, Dietrich Althausen, Annett Skupin, et al.

    The satellite mission EarthCARE (Earth Cloud, Aerosol, and Radiation Explorer) of the European Space Agency (ESA) and the Japan Aerospace Exploration Agency (JAXA) was successfully launched in May 2024. The satellite has four instruments on board, namely a high-spectral-resolution lidar called ATLID, a Cloud Profiling Doppler Radar (CPR), a Multi-Spectral Imager (MSI), and a Broad-Band Radiometer (BBR). ATLID provides for the first time directly measured profiles of the extinction and backscatter coefficient (and thus lidar ratio) together with the depolarization ratio at 355 nm from space. Since the start of the measurements, several updates in the ESA’s processing chain have been made resulting in different base-lines of the products. A first homogenized data set for the entire mission duration processed with one algorithm version, namely Baseline BA, was accomplished in September 2025. We used ground-based multiwavelength-Raman-polarization lidars of PollyNET operating in the framework of the Aerosol, Clouds and Trace gases Research Infrastructure (ACTRIS) to discuss the quality of ATLID profiling products based on golden case studies. The PollyNET lidars measure the same geophysical parameter as EarthCARE, namely profiles of the particle backscatter coefficient, the particle extinction coefficient, and the particle linear depolarization ratio at 355 nm. Seven dedicated cases, for which EarthCARE and the ground-based reference system observed the same atmospheric scene, were selected, spanning several atmospheric conditions (ice clouds, high aerosol load, pristine conditions) and geographic locations (Tropical Atlantic, Europe, Central Asia, and the pristine Southern Hemisphere). Our investigations revealed that ATLID has remarkable profiling capabilities with good signal strength and high vertical resolution. The ATLID profiling product of ESA’s processing chain, A-EBD, could resolve the vertical structure of the targeted atmospheric features very well so that the A-EBD backscatter and extinction profiles (at low resolution) matched qualitatively (and mostly quantitatively) with the ground-based reference observations for most investigated atmospheric conditions. The intensive particle quantity lidar ratio is retrieved layer-wise and thus not in the same resolution as the backscatter and extinction products. It matches in many cases with the ground-based reference, but we also detected occasions when the lidar ratio in certain atmospheric regions was significantly deviating from the reference, which also then affects either the extinction or backscatter coefficient values. Especially edge effects at the transition of particle layers to clean air seem to be problematic. Concerning ATLID’s depolarization ratio, fair agreement was found for strongly scattering and depolarizing features, like ice clouds – especially during nighttime. For the aerosol regime, however, we confirm significant deviations from the ground reference and consider the depolarization ratio in Baselines BA and BB as quantitatively not reliable, especially during daytime. Thus, ATLID’s depolarization ratio of Baselines B can be used to discriminate but not to type atmospheric features. In conclusion, we can state that ATLID’s optical profiles of Baselines B are ready for scientific exploitation keeping in mind the reported drawbacks (e.g., depolarization ratio offsets, edge effects, occasional retrieval errors, non-complete quality flags). EarthCARE data should therefore be intensively quality checked before using for scientific studies. As EarthCARE’s lifetime was recently foreseen to last for more than 10 years and algorithm development continues, such validation efforts stay important and complement other respective validation approaches.

  • Open Access

    Comment on egusphere-2026-1490

    by Holger Baars, Moritz Haarig, Leonard König, Athena A. Floutsi, Elizaveta Basharova, Julian Hofer, Henriette Gebauer, Ronny Engelmann, Dietrich Althausen, Annett Skupin, et al.

    The satellite mission EarthCARE (Earth Cloud, Aerosol, and Radiation Explorer) of the European Space Agency (ESA) and the Japan Aerospace Exploration Agency (JAXA) was successfully launched in May 2024. The satellite has four instruments on board, namely a high-spectral-resolution lidar called ATLID, a Cloud Profiling Doppler Radar (CPR), a Multi-Spectral Imager (MSI), and a Broad-Band Radiometer (BBR). ATLID provides for the first time directly measured profiles of the extinction and backscatter coefficient (and thus lidar ratio) together with the depolarization ratio at 355 nm from space. Since the start of the measurements, several updates in the ESA’s processing chain have been made resulting in different base-lines of the products. A first homogenized data set for the entire mission duration processed with one algorithm version, namely Baseline BA, was accomplished in September 2025. We used ground-based multiwavelength-Raman-polarization lidars of PollyNET operating in the framework of the Aerosol, Clouds and Trace gases Research Infrastructure (ACTRIS) to discuss the quality of ATLID profiling products based on golden case studies. The PollyNET lidars measure the same geophysical parameter as EarthCARE, namely profiles of the particle backscatter coefficient, the particle extinction coefficient, and the particle linear depolarization ratio at 355 nm. Seven dedicated cases, for which EarthCARE and the ground-based reference system observed the same atmospheric scene, were selected, spanning several atmospheric conditions (ice clouds, high aerosol load, pristine conditions) and geographic locations (Tropical Atlantic, Europe, Central Asia, and the pristine Southern Hemisphere). Our investigations revealed that ATLID has remarkable profiling capabilities with good signal strength and high vertical resolution. The ATLID profiling product of ESA’s processing chain, A-EBD, could resolve the vertical structure of the targeted atmospheric features very well so that the A-EBD backscatter and extinction profiles (at low resolution) matched qualitatively (and mostly quantitatively) with the ground-based reference observations for most investigated atmospheric conditions. The intensive particle quantity lidar ratio is retrieved layer-wise and thus not in the same resolution as the backscatter and extinction products. It matches in many cases with the ground-based reference, but we also detected occasions when the lidar ratio in certain atmospheric regions was significantly deviating from the reference, which also then affects either the extinction or backscatter coefficient values. Especially edge effects at the transition of particle layers to clean air seem to be problematic. Concerning ATLID’s depolarization ratio, fair agreement was found for strongly scattering and depolarizing features, like ice clouds – especially during nighttime. For the aerosol regime, however, we confirm significant deviations from the ground reference and consider the depolarization ratio in Baselines BA and BB as quantitatively not reliable, especially during daytime. Thus, ATLID’s depolarization ratio of Baselines B can be used to discriminate but not to type atmospheric features. In conclusion, we can state that ATLID’s optical profiles of Baselines B are ready for scientific exploitation keeping in mind the reported drawbacks (e.g., depolarization ratio offsets, edge effects, occasional retrieval errors, non-complete quality flags). EarthCARE data should therefore be intensively quality checked before using for scientific studies. As EarthCARE’s lifetime was recently foreseen to last for more than 10 years and algorithm development continues, such validation efforts stay important and complement other respective validation approaches.

  • Open Access

    Contribution of the 2DVD to the investigation of cloud microphysics during the MOSAiC and Cloudlab/PolarCAP campaigns

    by Tom Gaudek, Cristofer Jimenez, Kevin Ohneiser, Christopher Fuchs, Jan Henneberger, Johannes Bühl, Andi Klamt, Albert Ansmann, Ronny Engelmann, Patric Seifert

    In this study, the particle maximum diameter is introduced and evaluated as a new variable of the two-dimensional video disdrometer (2DVD). Vertically resolved remote-sensing measurements meanwhile allow to retrieve the microphysical properties of precipitation. However, opportunities for a direct evaluation of those retrievals are still lacking. One possible approach is the ground-based observation of precipitation particles with in-situ sensors such as the 2DVD. In this context, the suitability of the 2DVD for contributing to cloud microphysics studies is being assessed. First, the retrieval of the particle maximum diameter as a new parameter is described, followed by an explanation about the procedure of the determination of dominant particle shapes done in this study. The capabilities of the 2DVD are demonstrated by means of measurements performed in a pre-alpine region of Switzerland which show that the instrument could detect signatures from cloud seeding experiments. Moreover, ice crystal number concentration and, for the first time, mean maximum diameter derived from the remote-sensing based LIRAS-ice retrieval are evaluated against ground-based in-situ measurements from the 2DVD. In the frame of a case study from the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition in 2019, LIRAS-ice and 2DVD data were found to agree well during suitable meteorological conditions that allow to relate surface observations to the higher-level remote sensing measurements. This study shows that the maximum diameter from 2DVD observations enhances the instrument's capability to contribute to precipitation-related research.


  • Open Access

    Validation of EarthCARE/ATLID aerosol profiling products with ground-based PollyNET lidars – case studies

    by Holger Baars, Moritz Haarig, Leonard König, Athena A. Floutsi, Elizaveta Basharova, Julian Hofer, Henriette Gebauer, Ronny Engelmann, Dietrich Althausen, Annett Skupin, et al.

    The satellite mission EarthCARE (Earth Cloud, Aerosol, and Radiation Explorer) of the European Space Agency (ESA) and the Japan Aerospace Exploration Agency (JAXA) was successfully launched in May 2024. The satellite has four instruments on board, namely a high-spectral-resolution lidar called ATLID, a Cloud Profiling Doppler Radar (CPR), a Multi-Spectral Imager (MSI), and a Broad-Band Radiometer (BBR). ATLID provides for the first time directly measured profiles of the extinction and backscatter coefficient (and thus lidar ratio) together with the depolarization ratio at 355 nm from space. Since the start of the measurements, several updates in the ESA’s processing chain have been made resulting in different base-lines of the products. A first homogenized data set for the entire mission duration processed with one algorithm version, namely Baseline BA, was accomplished in September 2025. We used ground-based multiwavelength-Raman-polarization lidars of PollyNET operating in the framework of the Aerosol, Clouds and Trace gases Research Infrastructure (ACTRIS) to discuss the quality of ATLID profiling products based on golden case studies. The PollyNET lidars measure the same geophysical parameter as EarthCARE, namely profiles of the particle backscatter coefficient, the particle extinction coefficient, and the particle linear depolarization ratio at 355 nm. Seven dedicated cases, for which EarthCARE and the ground-based reference system observed the same atmospheric scene, were selected, spanning several atmospheric conditions (ice clouds, high aerosol load, pristine conditions) and geographic locations (Tropical Atlantic, Europe, Central Asia, and the pristine Southern Hemisphere). Our investigations revealed that ATLID has remarkable profiling capabilities with good signal strength and high vertical resolution. The ATLID profiling product of ESA’s processing chain, A-EBD, could resolve the vertical structure of the targeted atmospheric features very well so that the A-EBD backscatter and extinction profiles (at low resolution) matched qualitatively (and mostly quantitatively) with the ground-based reference observations for most investigated atmospheric conditions. The intensive particle quantity lidar ratio is retrieved layer-wise and thus not in the same resolution as the backscatter and extinction products. It matches in many cases with the ground-based reference, but we also detected occasions when the lidar ratio in certain atmospheric regions was significantly deviating from the reference, which also then affects either the extinction or backscatter coefficient values. Especially edge effects at the transition of particle layers to clean air seem to be problematic. Concerning ATLID’s depolarization ratio, fair agreement was found for strongly scattering and depolarizing features, like ice clouds – especially during nighttime. For the aerosol regime, however, we confirm significant deviations from the ground reference and consider the depolarization ratio in Baselines BA and BB as quantitatively not reliable, especially during daytime. Thus, ATLID’s depolarization ratio of Baselines B can be used to discriminate but not to type atmospheric features. In conclusion, we can state that ATLID’s optical profiles of Baselines B are ready for scientific exploitation keeping in mind the reported drawbacks (e.g., depolarization ratio offsets, edge effects, occasional retrieval errors, non-complete quality flags). EarthCARE data should therefore be intensively quality checked before using for scientific studies. As EarthCARE’s lifetime was recently foreseen to last for more than 10 years and algorithm development continues, such validation efforts stay important and complement other respective validation approaches.


  • Open Access

    The goSouth-2 campaign in Invercargill, New Zealand:First insights into heterogeneous ice formation and the effects of Australian aerosols on clouds at the edge of the Southern Ocean

    by Patric Seifert, Martin Radenz, Tom Gaudek, Pieper Lukas, George McCosh, Kevin Ohneiser, Ronny Engelmann, Holger Baars, Annett Skupin, Silvia Henning, et al.

    The region of the Southern Ocean (SO) is a current hot-spot of research related to aerosol-cloud interactions. On the one hand, detailed observations of aerosols and clouds and their interactions are required to explain the shortwave radiation bias in model simulations. On the other hand, the clean environment of the SO atmosphere allows the study of the impact of even slight variabilities in the aerosol load on cloud and precipitation processes and on the radiation budget of the atmosphere.The goSouth-2 project led by Leibniz Institute for Tropospheric Research (TROPOS) contributes with a unique long-term dataset of remote-sensing and in-situ measurements of cloud-relevant aerosol properties and associated cloud properties for the northern edge of the SO. The core facility of goSouth-2 is the ACTRIS station LACROS (Leipzig Aerosol and Cloud Remote Observations System) which has been deployed on the premises of the New Zealand MetService in Invercargill (46.4173 °S, 168.3307 °E, 3 m a.s.l., https://cloudnet.fmi.fi/site/invercargill) at the southern tip of the New Zealand’s South Island. The characterization of aerosol optical properties is observed by a newly-built PollyXT lidar. This system yields backscatter coefficient and depolarization ratios at 355, 532, and 1064 nm. Extinction coefficients are derived from Raman scattering at 387 and 607 nm. Raman scattering by water vapour at 407 nm yields observations of the water vapour mixing ratio. In addition, it is the first PollyXT lidar which includes a 460-nm fluorescence channel enabling a more refined discrimination between smoke, biological aerosols, and other types of pollution. Cloud properties are covered by 94- and 35-GHz cloud radar observations, of which the latter provides RHI and PPI scans for characterization of hydrometeor shapes and the horizontal wind field. Surface in-situ observations of the aerosol size distribution, cloud condensation nuclei concentrations, and off-line characterization of ice nucleating particle (INP) concentrations are performed. goSouth-2 is involved in the project ACADIA jointly run by Leipzig University and TROPOS, the HALO-South aircraft campaign, ongoing EarthCARE Cal/Val activities, and is conducted in close collaboration with partners from University of Canterbury, Earth Sciences New Zealand, and MetService, NZ. The latter contributes 2 radiosonde launches per day and weather radar observations.First conclusions drawn from the dataset to date are that aerosol in the cloud-free troposphere is rare. If present, it can mostly be assigned to wildfires or dust from Africa or Australia. In SO air masses ice formation in clouds warmer than -4°C is frequently absent, confirming the lack of efficient INPs. The majority of stratiform precipitation systems is found to be embedded in Australian air masses. A remarkable feature is that enhanced loads of Australian aerosols (dust, smoke) are frequently associated with enhanced turbulence in the affected cloud systems, similar to the dusty-cirrus phenomenon. Observations of the lowest 3 km of marine atmosphere, show a complex aerosol structure containing multiple embedded sub-layers of differing aerosol properties, whose effects on cloud formation remain to be identified. We use co-located observations from goSouth-2, the HALO-South aircraft campaign, and EarthCARE to characterize the observed scenarios.

  • Open Access

    Synergistic lidar and modelling frameworks for pollution monitoring: assessing model reliability between diverse urban sites

    by Alexandra Chudnovsky, Kevin Ohneiser, Albert Ansmann, David Avisar, Sigalit Berkovic, Fima Roter, Dorita Rostkier-Edelstein

    Characterizing aerosol dynamics in coastal urban areas remains a challenge due to the interplay between complex topography and diverse emission sources. This study presents a framework integrating ground-based lidar observations with high-resolution Weather Research and Forecasting (WRF) simulations to resolve the three-dimensional structure of the Eastern Mediterranean (EM) boundary layer. We validate a high-resolution WRF model using diverse ground-based measurements. By evaluating distinct synoptic regimes such as long-range dust transport and complex multi-source pollution layering, we demonstrate how numerical modelling complements lidar-derived profiles of aerosols, humidity, and thermodynamics. A key finding of this integrated approach is the WRF capacity to provide relatively high accuracy estimates during daytime periods when solar background noise typically limits lidar signal, enabling continuous, 24-hour characterization of complex urban vertical profile. In particular, the WRF model successfully simulated key atmospheric features observed by lidar, supporting its application as a validated, complementary tool for refining urban air quality representation, especially during periods when continuous observational data are limited or unavailable. Our analysis also shows that surface-level monitoring largely underestimates the vertical complexity of pollution transport in regions like Haifa and Tel Aviv. This study presents a transferable methodology for refining aerosol and moisture distribution assessments in urban areas, where pollution layering conditions are difficult to predict.

  • Open Access

    Ice-nucleating particle depletion in the wintertime boundary layer in the pre-Alpine region during stratus cloud conditions

    by Kevin Ohneiser, Markus Hartmann, Heike Wex, Patric Seifert, Anja Hardt, Anna Miller, Katharina Baudrexl, Werner Thomas, Veronika Ettrichrätz, Maximilian Maahn, et al.

    The remote-sensing equipment of LACROS (Leipzig Aerosol and Cloud Remote Observations System) was installed in Eriswil, Switzerland during the winter campaign of 2023 / 2024. We utilize a big dataset of in situ (especially ice-nucleating particle (INP) sampler; low volume sampler) and remote-sensing (especially cloud radar and Raman lidar) equipment. In addition, INP measurements were available as well in Hohenpeißenberg, Germany and Melpitz, Germany.We evaluate the regional variability of the number concentration of INPs between the two pre-Alpine central-European sites of Eriswil and Hohenpeißenberg, supported by INP measurements from Melpitz during the winter months of 2024. The aim of the study is to spatially and temporally evaluate INP availability and removal within the planetary boundary layer (PBL) during Bise situations because reasons for the lack of ice and precipitation in the supercooled clouds observed over the Swiss Plateau remain unclear and may be caused by the lack of INPs. Target scenario of the study were situations when northeasterly winds (so-called Bise winds) prevailed and layers of stratus clouds formed at the top of the PBL at temperatures down to −10 °C. In these situations, it is expected that INPs are depleted along the transport path.We will present our main insights from our measurements:1) During the cold-Bise (cloud minimum temperatures as low as −10 °C) and warm-Bise (cloud minimum temperatures above 0 °C), almost no INP contrast was found between Hohenpeißenberg and Eriswil if both were within the PBL. Also, the INP concentration was overall found to be much lower during the cold-Bise than during the later warm-Bise situation.2) When the Hohenpeißenberg site was located in the free troposphere during the cold-Bise situation, INP concentrations were much higher compared to Eriswil (still within the PBL) but similar to cloud-free Melpitz. These observations led to the conclusion that during cold-Bise situations the INP reservoir within the PBL is depleted, likely by the presence of supercooled stratus. The inversion-capped wintertime PBL, especially during periods of widespread snow cover, is apparently not capable to replenish the INP reservoir from the free troposphere.3) INP observations of around 10^−3 L^−1 at Hohenpeißenberg, when this site was above the PBL were on a similar order as the ice crystal number concentrations (ICNC) observed during the same period at Eriswil. This supports the hypothesis that INPs are entrained from the free troposphere via turbulence and afterwards immediately removed as they interact with the Bise cloud layer, leading to reduced availability of INPs downwind. It must be noted that an ICNC concentration which is higher than the observed INP concentration can in principle also be a result of secondary ice formation processes. Nevertheless, secondary ice formation processes generally lead to orders of magnitudes of increase in ICNC, which was, besides occasional peaks in the ICNC, not observed in the average ICNC values during the investigated time periods.

  • Open Access

    Ice-nucleating particle depletion in the wintertime boundary layer in the pre-Alpine region during stratus cloud conditions

    by Kevin Ohneiser, Markus Hartmann, Heike Wex, Patric Seifert, Anja Hardt, Anna Miller, Katharina Baudrexl, Werner Thomas, Veronika Ettrichrätz, Maximilian Maahn, et al.

    This study evaluates the regional variability of the number concentration of ice-nucleating particles (INPs) between the two pre-Alpine central-European sites of Eriswil, Switzerland, and Hohenpeißenberg, Germany, supported by INP measurements from Melpitz, Germany, during the winter months of 2024. The aim of the study is to spatially and temporally evaluate INP availability and removal within the planetary boundary layer (PBL) during Bise situations because reasons for the lack of ice and precipitation in the supercooled clouds observed over the Swiss Plateau remain unclear and may be caused by the lack of INPs. Target scenario of the study were situations when northeasterly winds (so-called Bise winds) prevailed and layers of stratus clouds formed at the top of the PBL at temperatures down to −10 °C. In these situations, it is expected that INPs are depleted along the transport path. The main insights from INP measurements were: first, during the cold-Bise (cloud minimum temperatures as low as −10 °C) and warm-Bise (cloud minimum temperatures above 0 °C), almost no INP contrast was found between Hohenpeißenberg and Eriswil if both were within the PBL. Also, the INP concentration was overall found to be much lower during the cold-Bise than during the later warm-Bise situation. Second, when the Hohenpeißenberg site was located in the free troposphere during the cold-Bise situation, INP concentrations were much higher compared to Eriswil (still within the PBL) but similar to cloud-free Melpitz. These observations led to the conclusion that during cold-Bise situations the INP reservoir within the PBL is depleted, likely by the presence of supercooled stratus. The inversion-capped wintertime PBL, especially during periods of widespread snow cover, is apparently not capable to replenish the INP reservoir from the free troposphere.