Michael Terorde
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Michael Terorde has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
Arno Lücken
Electrical Power Systems/Helmut Schmidt University; University of the Federal Armed Forces; Holstenhofweg 85 22043 Hamburg Germany
1 shared publicationDetlef Schulz
Helmut Schmidt University Hamburg, Germany
1 shared publication- Detlef Schulz
Department of Electrical Engineering, Helmut Schmidt University, 22043 Hamburg, Germany
1 shared publication Housam Wattar
Airbus Group Innovations Hamburg, Germany
1 shared publication
Latest Publications
- 28 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 51 (3) , 1781-1792
Phase balancing for aircraft electrical distribution systems
The aircraft of the future will use several new concepts to improve its electrical power supply system, transforming it into a small smart distribution grid. Among these concepts, power management systems, increase in the main bus voltage, integration of high-voltage direct current grids, phase balancing, and power feeder balancing have been suggested. All these methods aim to reduce the overall weight of the aircraft. In order to analyze the weight-saving potential of aircraft through the phase-balancing method, simulations have been built based on the electrical load analysis of an actual passenger aircraft. The simulations reproduce the electrical power supply grid of an aircraft and the asymmetric utilization of the phases of the power feeders. Within the simulations, phase balancing is tested with different objective functions in order to achieve a more symmetric load of the feeder main line and the feeder branches and to minimize the return current. The new proposed concept suggests that loads be shifted depending on the ground/flight phases based on a fixed switching scheme, which is calculated before the first flight of the aircraft. As a result, only the nonflight-relevant commercial loads have been made switchable. Additionally, based on former publications, the local distribution of the loads and the load power factor have thereby been taken into account. Based on the simulation results, the weight benefit for the actual aircraft has been calculated. To validate the new concept, a switching box containing several multiplex switches has been built, and experimental results are presented.
- 28 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 51 (3) , 1781-1792
Phase balancing for aircraft electrical distribution systems
The aircraft of the future will use several new concepts to improve its electrical power supply system, transforming it into a small smart distribution grid. Among these concepts, power management systems, increase in the main bus voltage, integration of high-voltage direct current grids, phase balancing, and power feeder balancing have been suggested. All these methods aim to reduce the overall weight of the aircraft. In order to analyze the weight-saving potential of aircraft through the phase-balancing method, simulations have been built based on the electrical load analysis of an actual passenger aircraft. The simulations reproduce the electrical power supply grid of an aircraft and the asymmetric utilization of the phases of the power feeders. Within the simulations, phase balancing is tested with different objective functions in order to achieve a more symmetric load of the feeder main line and the feeder branches and to minimize the return current. The new proposed concept suggests that loads be shifted depending on the ground/flight phases based on a fixed switching scheme, which is calculated before the first flight of the aircraft. As a result, only the nonflight-relevant commercial loads have been made switchable. Additionally, based on former publications, the local distribution of the loads and the load power factor have thereby been taken into account. Based on the simulation results, the weight benefit for the actual aircraft has been calculated. To validate the new concept, a switching box containing several multiplex switches has been built, and experimental results are presented.
- 18 September 2013
- Published by Hindawi Limited in International Journal of Energy Research
- Vol. 38 (8) , 1075-1082
Weight saving in the electrical distribution systems of aircraft using innovative concepts
There is a growing need for an electrical generation and distribution system for modern commercial aircraft. In the field of aviation, there is a trend towards ‘more electric aircraft’, which implies the substitution of the hydraulic and pneumatic systems by electrical ones. This trend, in effect, results in an increasing demand for energy. In aircraft construction, there is a state-of-the-art inflexible point-to-point supply of loads based on a complex and expensive electric load analysis. Connecting the load to different feeders during flights is not possible because of rigid wiring. The article introduces modern concepts for improving the electrical distribution system—namely feeder balancing and phase balancing. These methods involve utilizing intelligent switching nodes based on power semiconductor devices. The concepts allow for a reallocation of electrical loads on different power feeders. The article will also present an analysis of the integration of a multifunctional fuel cell system with a focus on the necessary changes in the electrical network of an aircraft. In less than a decade's time, commercial aircraft could use low-temperature fuel cells to substitute the auxiliary power unit and the ram air turbine, which is used in ground phases and in cases of turbine failure. Using fuel, cells could aid in constructing a completely different layout of the electrical network implementing a ±270 V DC voltage level. The increasing electrical demand of aircraft requires an energy-efficient power supply network. Copyright © 2013 John Wiley & Sons, Ltd.
- 18 September 2013
- Published by Hindawi Limited in International Journal of Energy Research
- Vol. 38 (8) , 1075-1082
Weight saving in the electrical distribution systems of aircraft using innovative concepts
There is a growing need for an electrical generation and distribution system for modern commercial aircraft. In the field of aviation, there is a trend towards ‘more electric aircraft’, which implies the substitution of the hydraulic and pneumatic systems by electrical ones. This trend, in effect, results in an increasing demand for energy. In aircraft construction, there is a state-of-the-art inflexible point-to-point supply of loads based on a complex and expensive electric load analysis. Connecting the load to different feeders during flights is not possible because of rigid wiring. The article introduces modern concepts for improving the electrical distribution system—namely feeder balancing and phase balancing. These methods involve utilizing intelligent switching nodes based on power semiconductor devices. The concepts allow for a reallocation of electrical loads on different power feeders. The article will also present an analysis of the integration of a multifunctional fuel cell system with a focus on the necessary changes in the electrical network of an aircraft. In less than a decade's time, commercial aircraft could use low-temperature fuel cells to substitute the auxiliary power unit and the ram air turbine, which is used in ground phases and in cases of turbine failure. Using fuel, cells could aid in constructing a completely different layout of the electrical network implementing a ±270 V DC voltage level. The increasing electrical demand of aircraft requires an energy-efficient power supply network. Copyright © 2013 John Wiley & Sons, Ltd.