Hairong Yuan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hairong Yuan has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Xiteng Chen
Department of Environmental Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China
3 shared publications - Xiujin Li
Department of Environmental Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China
2 shared publications - Xiujin Li
Department of Environmental Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China
2 shared publications Baoning Zhu
Centre for Resource and Environmental Research, Beijing University of Chemical Technology, Chaoyang District, People’s Republic of China
1 shared publication- Dexun Zou
Department of Environmental Science & Engineering, Beijing University of Chemical Technology, Beijing 100029, China
1 shared publication - Do-Gyun Kim
Department of Biological Systems Engineering, Washington State University, Pullman, WA 99164, USA
1 shared publication
Latest Publications
- Open Access
- 28 May 2026
- Published by MDPI AG in Bioengineering
- Vol. 13 (6) , 630
Enhancing Biomethane Production from Corn Stover: Insights into Lignocellulosic Component Interactions and Pretreatment Efficacy
In this study, the methane yield, substance conversion rate and microbial community structure of individual components of lignocellulose, synthetic mixtures, and corn straw subjected to different pretreatments (thermal hydrolysis, chemical, biological, and combined pretreatment) during anaerobic digestion were comparatively investigated. The synthetic mixture of cellulose and hemicellulose (MCXY) exerted a positive promoting effect on biomethane production, with a synergistic effect index of 101.51%. The methane yield per volatile solids (VS) of microcrystalline cellulose (MC), xylan (XY), and MCXY reached 320.81 ± 1.85 mL/g VS, 352.70 ± 6.58 mL/g VS, and 340.60 ± 10.94 mL/g VS, respectively. Lignin did not produce biogas in anaerobic digestion (AD) system, and its presence had an inhibitory effect on the methanogenesis of cellulose and hemicellulose, especially that of hemicellulose. Notably, pretreatment significantly improved the methane production potential of corn stover. Deep eutectic solvent-pretreated corn stover (DES_CS) achieved the highest methane yield of 356.57 ± 8.50 mL/g VS, which was 55.46% higher than that of the untreated group. DES pretreatment deconstructed lignocellulosic matrix and distinctly increased DOM molecular diversity, thus providing superior substrate conditions for improving anaerobic digestion performance. Microbial community analysis revealed that DES pretreatment significantly reshaped the bacterial structure, enriching syntrophic taxa over the carbohydrate-degrading Bacteroides found in raw corn stover, thereby fostering a more robust metabolic network for methane production. While acetoclastic Methanothrix dominated the pretreated groups, its synergistic coexistence with hydrogenotrophic Methanobacterium across all digesters facilitated stable dual-pathway methanogenesis. This work can provide a theoretical basis and technical reference for the optimization and application of pretreatment strategies for efficient anaerobic digestion of corn stover.
- 28 May 2026
- Published by MDPI AG in Bioengineering
- Vol. 13 (6) , 630
Open AccessEnhancing Biomethane Production from Corn Stover: Insights into Lignocellulosic Component Interactions and Pretreatment Efficacy
In this study, the methane yield, substance conversion rate and microbial community structure of individual components of lignocellulose, synthetic mixtures, and corn straw subjected to different pretreatments (thermal hydrolysis, chemical, biological, and combined pretreatment) during anaerobic digestion were comparatively investigated. The synthetic mixture of cellulose and hemicellulose (MCXY) exerted a positive promoting effect on biomethane production, with a synergistic effect index of 101.51%. The methane yield per volatile solids (VS) of microcrystalline cellulose (MC), xylan (XY), and MCXY reached 320.81 ± 1.85 mL/g VS, 352.70 ± 6.58 mL/g VS, and 340.60 ± 10.94 mL/g VS, respectively. Lignin did not produce biogas in anaerobic digestion (AD) system, and its presence had an inhibitory effect on the methanogenesis of cellulose and hemicellulose, especially that of hemicellulose. Notably, pretreatment significantly improved the methane production potential of corn stover. Deep eutectic solvent-pretreated corn stover (DES_CS) achieved the highest methane yield of 356.57 ± 8.50 mL/g VS, which was 55.46% higher than that of the untreated group. DES pretreatment deconstructed lignocellulosic matrix and distinctly increased DOM molecular diversity, thus providing superior substrate conditions for improving anaerobic digestion performance. Microbial community analysis revealed that DES pretreatment significantly reshaped the bacterial structure, enriching syntrophic taxa over the carbohydrate-degrading Bacteroides found in raw corn stover, thereby fostering a more robust metabolic network for methane production. While acetoclastic Methanothrix dominated the pretreated groups, its synergistic coexistence with hydrogenotrophic Methanobacterium across all digesters facilitated stable dual-pathway methanogenesis. This work can provide a theoretical basis and technical reference for the optimization and application of pretreatment strategies for efficient anaerobic digestion of corn stover.
- Open Access
- 25 May 2026
- Published by MDPI AG in Bioengineering
- Vol. 13 (6) , 613
Methane Yield, Substrate Conversion, Microbial Community Structure and Metabolic Pathways During Anaerobic Digestion of Natural Cellulosic Biomass
Three natural celluloses (softwood pulp, straw grass pulp, and degreased cotton) were used for anaerobic digestion tests to research methane yield, substrate conversion and microbial community structure, and further supplemented and clarified the metabolic pathway mechanisms of anaerobic digestion of cellulosic biomass. The results showed that natural cellulose could be significantly degraded and converted into methane by anaerobic microorganisms. The cumulative specific methane yields of wood pulp fiber (F1), straw pulp fiber (F2), and degreased cotton fiber (F3) were 373.57 ± 10.70 mL/g VS, 349.15 ± 13.20 mL/g VS and 346.16 ± 1.60 mL/g VS, respectively. The corresponding biodegradability values were 93.97%, 85.95% and 84.32%. Although the fermentation cycles in F1, F2, and F3 were identical (T95 was 12 days), the three groups exhibited distinct biogas production patterns. Metagenomic analysis indicated that F1 and F2 were dominated by the acetoclastic methanogenesis pathway, while the proportion of the hydrogenotrophic methanogenesis pathway increased in F3. Meanwhile, the cell motility pathway category was significantly enriched in F3. These results supplement the existing research on the anaerobic digestion of natural cellulose and provide theoretical support for the efficient anaerobic bioconversion of natural cellulosic biomass.
- 25 May 2026
- Published by MDPI AG in Bioengineering
- Vol. 13 (6) , 613
Open AccessMethane Yield, Substrate Conversion, Microbial Community Structure and Metabolic Pathways During Anaerobic Digestion of Natural Cellulosic Biomass
Three natural celluloses (softwood pulp, straw grass pulp, and degreased cotton) were used for anaerobic digestion tests to research methane yield, substrate conversion and microbial community structure, and further supplemented and clarified the metabolic pathway mechanisms of anaerobic digestion of cellulosic biomass. The results showed that natural cellulose could be significantly degraded and converted into methane by anaerobic microorganisms. The cumulative specific methane yields of wood pulp fiber (F1), straw pulp fiber (F2), and degreased cotton fiber (F3) were 373.57 ± 10.70 mL/g VS, 349.15 ± 13.20 mL/g VS and 346.16 ± 1.60 mL/g VS, respectively. The corresponding biodegradability values were 93.97%, 85.95% and 84.32%. Although the fermentation cycles in F1, F2, and F3 were identical (T95 was 12 days), the three groups exhibited distinct biogas production patterns. Metagenomic analysis indicated that F1 and F2 were dominated by the acetoclastic methanogenesis pathway, while the proportion of the hydrogenotrophic methanogenesis pathway increased in F3. Meanwhile, the cell motility pathway category was significantly enriched in F3. These results supplement the existing research on the anaerobic digestion of natural cellulose and provide theoretical support for the efficient anaerobic bioconversion of natural cellulosic biomass.
- Open Access
- 2 March 2026
- Published by MDPI AG in Bioengineering
- Vol. 13 (3) , 295
Biomethane Conversion of Hemicellulose: Biomethane Production, Kinetic Analysis, Substance Conversion, and Microbial Community Dynamics
As a key constituent of lignocellulosic biomass, the role of hemicellulose in anaerobic digestion (AD) remains inadequately characterized, particularly regarding its methane potential and degradation process patterns. This study systematically characterized the AD performance of hemicellulose using xylan as a representative substrate. The results showed that xylan achieved a high methane potential of 350–390 mL/g VS and 89.57% biodegradability, exhibiting a shorter lag phase (λ) and higher reaction rate (k) than other biomass fractions. Substantial acetic acid and ethanol accumulated within the first 24 h, while late-stage dissolved organic matter (DOM) shifted toward complex lignin/CRAM-like. The results of microbial dynamics indicated that the collaborative interaction among Anaerobium, Lactobacillus, and Clostridium accelerated xylan transformation. While methanogenesis was predominantly driven by the acetoclastic route (specifically Methanosarcina), hydrogenotrophic Methanobacterium thrived during temporary pH fluctuations. This work serves as a valuable guide for developing high-performance strategies in industrial lignocellulosic biogas plants.
- 2 March 2026
- Published by MDPI AG in Bioengineering
- Vol. 13 (3) , 295
Open AccessBiomethane Conversion of Hemicellulose: Biomethane Production, Kinetic Analysis, Substance Conversion, and Microbial Community Dynamics
As a key constituent of lignocellulosic biomass, the role of hemicellulose in anaerobic digestion (AD) remains inadequately characterized, particularly regarding its methane potential and degradation process patterns. This study systematically characterized the AD performance of hemicellulose using xylan as a representative substrate. The results showed that xylan achieved a high methane potential of 350–390 mL/g VS and 89.57% biodegradability, exhibiting a shorter lag phase (λ) and higher reaction rate (k) than other biomass fractions. Substantial acetic acid and ethanol accumulated within the first 24 h, while late-stage dissolved organic matter (DOM) shifted toward complex lignin/CRAM-like. The results of microbial dynamics indicated that the collaborative interaction among Anaerobium, Lactobacillus, and Clostridium accelerated xylan transformation. While methanogenesis was predominantly driven by the acetoclastic route (specifically Methanosarcina), hydrogenotrophic Methanobacterium thrived during temporary pH fluctuations. This work serves as a valuable guide for developing high-performance strategies in industrial lignocellulosic biogas plants.
- Open Access
- 6 March 2023
- Published by MDPI AG in Fermentation
- Vol. 9 (3) , 262
Effects of Metal and Metal Ion on Biomethane Productivity during Anaerobic Digestion of Dairy Manure
To overcome major limiting factors of microbial processes in anaerobic digestion (AD), metal and metal ions have been extensively studied. However, there is confusion about the effects of metals and metal ions on biomethane productivity in previous research. In this study, Zn and Zn2+ were selected as representatives of metals and metal ions, respectively, to investigate the effects on biomethane productivity. After the metals and metal ions at different concentrations were added to the batch AD experiments under the same mesophilic conditions, a Zn dose of 1 g/L and a Zn2+ dose of 4 mg/L were found to cause the highest biomethane production, respectively. The results indicate that metal (Zn) and metal ion (Zn2+) have different mechanisms to improve AD performance. There may be two possible explanations. To act as conductive materials in interspecies electron transfer (IET), relatively high doses of metals (e.g., 1 g/L of Zn, 10 g/L of Fe) are needed to bridge the electron transfer from syntrophic bacteria to methanogenic archaea in the AD process. As essential mineral nutrients, the AD system requires relatively low doses of metal ions (e.g., 4 mg/L of Zn2+, 5 mg/L of Fe2+) to supplement the component of various enzymes that catalyze anaerobic reactions and transformations. This research will provide clear insight for selecting appropriate amounts of metals or metal ions to enhance biomethane productivity for industrial AD processes.
- 6 March 2023
- Published by MDPI AG in Fermentation
- Vol. 9 (3) , 262
Open AccessEffects of Metal and Metal Ion on Biomethane Productivity during Anaerobic Digestion of Dairy Manure
To overcome major limiting factors of microbial processes in anaerobic digestion (AD), metal and metal ions have been extensively studied. However, there is confusion about the effects of metals and metal ions on biomethane productivity in previous research. In this study, Zn and Zn2+ were selected as representatives of metals and metal ions, respectively, to investigate the effects on biomethane productivity. After the metals and metal ions at different concentrations were added to the batch AD experiments under the same mesophilic conditions, a Zn dose of 1 g/L and a Zn2+ dose of 4 mg/L were found to cause the highest biomethane production, respectively. The results indicate that metal (Zn) and metal ion (Zn2+) have different mechanisms to improve AD performance. There may be two possible explanations. To act as conductive materials in interspecies electron transfer (IET), relatively high doses of metals (e.g., 1 g/L of Zn, 10 g/L of Fe) are needed to bridge the electron transfer from syntrophic bacteria to methanogenic archaea in the AD process. As essential mineral nutrients, the AD system requires relatively low doses of metal ions (e.g., 4 mg/L of Zn2+, 5 mg/L of Fe2+) to supplement the component of various enzymes that catalyze anaerobic reactions and transformations. This research will provide clear insight for selecting appropriate amounts of metals or metal ions to enhance biomethane productivity for industrial AD processes.
- 20 July 2013
- Published by Springer Nature in Applied Biochemistry and Biotechnology
- Vol. 171 (3) , 626-642
Improving the Mixing Performances of Rice Straw Anaerobic Digestion for Higher Biogas Production by Computational Fluid Dynamics (CFD) Simulation
As a lignocellulose-based substrate for anaerobic digestion, rice straw is characterized by low density, high water absorbability, and poor fluidity. Its mixing performances in digestion are completely different from traditional substrates such as animal manures. Computational fluid dynamics (CFD) simulation was employed to investigate mixing performances and determine suitable stirring parameters for efficient biogas production from rice straw. The results from CFD simulation were applied in the anaerobic digestion tests to further investigate their reliability. The results indicated that the mixing performances could be improved by triple impellers with pitched blade, and complete mixing was easily achieved at the stirring rate of 80 rpm, as compared to 20–60 rpm. However, mixing could not be significantly improved when the stirring rate was further increased from 80 to 160 rpm. The simulation results agreed well with the experimental results. The determined mixing parameters could achieve the highest biogas yield of 370 mL (g TS)−1 (729 mL (g TSdigested)−1) and 431 mL (g TS)−1 (632 mL (g TSdigested)−1) with the shortest technical digestion time (T 80) of 46 days. The results obtained in this work could provide useful guides for the design and operation of biogas plants using rice straw as substrates.
- 20 July 2013
- Published by Springer Nature in Applied Biochemistry and Biotechnology
- Vol. 171 (3) , 626-642
Improving the Mixing Performances of Rice Straw Anaerobic Digestion for Higher Biogas Production by Computational Fluid Dynamics (CFD) Simulation
As a lignocellulose-based substrate for anaerobic digestion, rice straw is characterized by low density, high water absorbability, and poor fluidity. Its mixing performances in digestion are completely different from traditional substrates such as animal manures. Computational fluid dynamics (CFD) simulation was employed to investigate mixing performances and determine suitable stirring parameters for efficient biogas production from rice straw. The results from CFD simulation were applied in the anaerobic digestion tests to further investigate their reliability. The results indicated that the mixing performances could be improved by triple impellers with pitched blade, and complete mixing was easily achieved at the stirring rate of 80 rpm, as compared to 20–60 rpm. However, mixing could not be significantly improved when the stirring rate was further increased from 80 to 160 rpm. The simulation results agreed well with the experimental results. The determined mixing parameters could achieve the highest biogas yield of 370 mL (g TS)−1 (729 mL (g TSdigested)−1) and 431 mL (g TS)−1 (632 mL (g TSdigested)−1) with the shortest technical digestion time (T 80) of 46 days. The results obtained in this work could provide useful guides for the design and operation of biogas plants using rice straw as substrates.