Bożena Smagowska
Research Subjects
Bożena Smagowska has a total of 1 co-authors. Here are the top co-authors by number of shared publications:
- Małgorzata Pawlaczyk-Łuszczyńska
Department of Physical Hazards, Nofer Institute of Occupational Medicine, Lodz, Poland
1 shared publication
Latest Publications
- 1 December 2013
- Published by Polish Academy of Sciences Chancellery in Archives of Acoustics
- Vol. 38 (4) , 559-563
Technical Note. An Objective and Subjective Study of Noise Exposure within the Frequency Range from 10 kHz to 40 kHz
The paper consists of study results of exposure to high frequency noise at metalworking workplaces. The study was carried out using objective methods (measurements of parameters characterizing the noise) and subjective studies (questionnaire survey). Metalworking workplaces were located in a steel structure (e.g. deck gratings) of the manufacturing plant. The results are equivalent sound pressure levels in the 1/3 octave frequency bands with center frequencies from 10 kHz to 40 kHz in reference to an 8-hour workday equal to approximately 81-105 dB at most of the tested workplaces and exceed permissible values. The questionnaire survey of annoyance high frequency noise (i.e. in the audible frequency and low ultrasound range) was conducted among 52 operators of machines. Most of the workers describe the noise as: buzzing, insistent, whistling and high-pitched squeaky. Respondents specify the noise levels occurring at workplaces as: loud, impeding communication, highly strenuous and tiring.
- 1 December 2013
- Published by Polish Academy of Sciences Chancellery in Archives of Acoustics
- Vol. 38 (4) , 559-563
Technical Note. An Objective and Subjective Study of Noise Exposure within the Frequency Range from 10 kHz to 40 kHz
The paper consists of study results of exposure to high frequency noise at metalworking workplaces. The study was carried out using objective methods (measurements of parameters characterizing the noise) and subjective studies (questionnaire survey). Metalworking workplaces were located in a steel structure (e.g. deck gratings) of the manufacturing plant. The results are equivalent sound pressure levels in the 1/3 octave frequency bands with center frequencies from 10 kHz to 40 kHz in reference to an 8-hour workday equal to approximately 81-105 dB at most of the tested workplaces and exceed permissible values. The questionnaire survey of annoyance high frequency noise (i.e. in the audible frequency and low ultrasound range) was conducted among 52 operators of machines. Most of the workers describe the noise as: buzzing, insistent, whistling and high-pitched squeaky. Respondents specify the noise levels occurring at workplaces as: loud, impeding communication, highly strenuous and tiring.
- Open Access
- 1 June 2013
- Published by Polish Academy of Sciences Chancellery in Archives of Acoustics
- Vol. 38 (2) , 169-176
Ultrasonic Noise Sources in a Work Environment
The use of ultrasonic energy has created versatile possibilities of their applications in many areas of life, especially in hydro location and underwater telecommunications, industry and medicine. The consequence of a widespread use of high intensity ultrasonics in technology is the increased number of people who are exposed to such ultrasonic noise. Therefore it is important to determine the types of machines and other devices that are responsible for the emission of ultrasonic noise (10-40 kHz of central frequencies of one-third octave bands) as harmful and annoying hazard in the work environment. This paper presents ultrasonic noise sources frequently used in industry and preventive measures reducing the exposure to ultrasonic noise. Two types of ultrasonic noise sources have been distinguished: machines and other devices used to carry out or improve production processes, the so-called technological sources and sources in which ultrasonic noise exists as a non-intentional result of operation of many machines and systems, the so-called non-technological sources of ultrasonic noise. The emission of SPL has been determined for each groups of devices based on own measurement results.
- 1 June 2013
- Published by Polish Academy of Sciences Chancellery in Archives of Acoustics
- Vol. 38 (2) , 169-176
Open AccessUltrasonic Noise Sources in a Work Environment
The use of ultrasonic energy has created versatile possibilities of their applications in many areas of life, especially in hydro location and underwater telecommunications, industry and medicine. The consequence of a widespread use of high intensity ultrasonics in technology is the increased number of people who are exposed to such ultrasonic noise. Therefore it is important to determine the types of machines and other devices that are responsible for the emission of ultrasonic noise (10-40 kHz of central frequencies of one-third octave bands) as harmful and annoying hazard in the work environment. This paper presents ultrasonic noise sources frequently used in industry and preventive measures reducing the exposure to ultrasonic noise. Two types of ultrasonic noise sources have been distinguished: machines and other devices used to carry out or improve production processes, the so-called technological sources and sources in which ultrasonic noise exists as a non-intentional result of operation of many machines and systems, the so-called non-technological sources of ultrasonic noise. The emission of SPL has been determined for each groups of devices based on own measurement results.
- 8 January 2013
- Published by Taylor & Francis in International Journal of Occupational Safety and Ergonomics
- Vol. 19 (2) , 195-202
Effects of Ultrasonic Noise on the Human Body—A Bibliographic Review
Industrial noise in the working environment has adverse effects on human hearing; literature and private studies confirm that. It has been determined that significant changes in the hearing threshold level occur in the high frequency audiometry, i.e., in the 8-20 kHz frequency range. Therefore, it is important to determine the effect of ultrasonic noise (10-40 kHz) on the human body in the working environment. This review describes hearing and nonhearing effects (thermal effects, subjective symptoms and functional changes) of the exposure to noise emitted by ultrasound devices. Many countries have standard health exposure limits to prevent effects of the exposure to ultrasonic noise in the working environment.
- 8 January 2013
- Published by Taylor & Francis in International Journal of Occupational Safety and Ergonomics
- Vol. 19 (2) , 195-202
Effects of Ultrasonic Noise on the Human Body—A Bibliographic Review
Industrial noise in the working environment has adverse effects on human hearing; literature and private studies confirm that. It has been determined that significant changes in the hearing threshold level occur in the high frequency audiometry, i.e., in the 8-20 kHz frequency range. Therefore, it is important to determine the effect of ultrasonic noise (10-40 kHz) on the human body in the working environment. This review describes hearing and nonhearing effects (thermal effects, subjective symptoms and functional changes) of the exposure to noise emitted by ultrasound devices. Many countries have standard health exposure limits to prevent effects of the exposure to ultrasonic noise in the working environment.