Jing Han
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jing Han has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Jiapeng Sun
College of Materials Science and Engineering, Hohai University, Nanjing 210024, China
12 shared publications - Jiyun Zhao
School of Mechanical and Electrical Engineering, China University of Mining and Technology, Xuzhou, China
5 shared publications - Liang Fang
State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, Xi’an, China
5 shared publications - Ying Han
Key Laboratory of Advanced Structural Materials, Ministry of Education, Changchun University of Technology, Changchun 130012, China
4 shared publications - Guosong Wu
College of Materials Science and Engineering, Hohai University, Nanjing 210024, China
3 shared publications - Hua Zhu
School of Mechanical and Electrical Engineering, China University of Mining and Technology, Xuzhou 221116, China
3 shared publications
Latest Publications
- Open Access
Effect of Phase Decomposition and Elemental Partitioning on Pitting Corrosion Susceptibility in Additively Manufactured High-Entropy Alloys
Additive manufacturing generally endows high-entropy alloys (HEAs) with distinctive microstructures and excellent properties unattainable by conventional processing. This study elucidates how annealing-induced phase decomposition and elemental partitioning govern pitting corrosion behavior in a laser-directed energy-deposited (LDED) Al0.5CoCrFeNi HEA. Notably, the rapid LDED solidification process produces a metastable B2 phase with anomalously high Cr content in this HEA compared to its conventional manufacturing counterpart. Upon annealing at 650 °C for 1 h, (Cr, Fe, Co)-enriched σ and (Cr, Fe)-enriched body-centered cubic (BCC) phases preferentially precipitate within the B2 phase, concurrently depleting Cr and enriching Al in the residual B2 matrix. This elemental repartitioning critically degrades the protective capability of the B2 phase’s passive film, thereby compromising the alloy’s overall pitting corrosion resistance, as evidenced by decreased pitting and repassivation potentials. These findings advance the fundamental understanding of corrosion mechanisms in additively manufactured HEAs and offer a mechanistic rationale for designing corrosion-resistant HEAs via controlled phase transformation.
Open AccessEffect of Phase Decomposition and Elemental Partitioning on Pitting Corrosion Susceptibility in Additively Manufactured High-Entropy Alloys
Additive manufacturing generally endows high-entropy alloys (HEAs) with distinctive microstructures and excellent properties unattainable by conventional processing. This study elucidates how annealing-induced phase decomposition and elemental partitioning govern pitting corrosion behavior in a laser-directed energy-deposited (LDED) Al0.5CoCrFeNi HEA. Notably, the rapid LDED solidification process produces a metastable B2 phase with anomalously high Cr content in this HEA compared to its conventional manufacturing counterpart. Upon annealing at 650 °C for 1 h, (Cr, Fe, Co)-enriched σ and (Cr, Fe)-enriched body-centered cubic (BCC) phases preferentially precipitate within the B2 phase, concurrently depleting Cr and enriching Al in the residual B2 matrix. This elemental repartitioning critically degrades the protective capability of the B2 phase’s passive film, thereby compromising the alloy’s overall pitting corrosion resistance, as evidenced by decreased pitting and repassivation potentials. These findings advance the fundamental understanding of corrosion mechanisms in additively manufactured HEAs and offer a mechanistic rationale for designing corrosion-resistant HEAs via controlled phase transformation.
- Open Access
Construction of a Gradient Nanostructure for Enhanced Surface Properties in 38CrMoAl Steel via Ultrasonic Severe Surface Rolling
Fabrication of gradient nanostructure on metal surfaces is recognized as an effective approach for enhancing mechanical and surface properties, as well as serving as a pretreatment for subsequent surface engineering. Unfortunately, their fabrication on high-strength and low-ductility metal surface poses a significant challenge due to the prevalent issue of process-induced surface damage. In this study, we report the successful fabrication of a gradient nanostructured surface layer with low roughness (Ra ~ 0.17 μm) on high-strength 38CrMoAl steel through an optimized ultrasonic severe surface rolling (USSR) processing. By systematically varying the tempering temperature of quenched-and-tempered samples, the strength and ductility of the 38CoMoAl steel are tailored to facilitate gradient nanostructure formation. Microstructural analysis via advanced electron microscopy reveals the gradient nanostructure features progressively coarser martensite/ferrite grains and decreasing dislocation density along the depth. As the tempering temperature increases from 600 °C to 700 °C, the yield strength of 38CrMoAl steel decreases from 915 ± 16 MPa to 815 ± 16 MPa, while the elongation increases from 18.7 ± 0.6 to 27.3 ± 1.2%, resulting in an increase in the thickness of the gradient nanostructured surface layer from 300 μm to 400 μm. Following USSR processing, samples tempered at 600 °C, 650 °C, and 700 °C exhibit significant enhancements in surface hardness by 7.3%, 22.7%, and 21.5%, respectively, along with substantial reduction in wear volume by 73%, 78%, and 60%. USSR processing also leads to a reduction in coefficient of friction. This work provides valuable insights into the fabrication of high-quality gradient nanostructures on high-strength, low-ductility metallic materials.
Open AccessConstruction of a Gradient Nanostructure for Enhanced Surface Properties in 38CrMoAl Steel via Ultrasonic Severe Surface Rolling
Fabrication of gradient nanostructure on metal surfaces is recognized as an effective approach for enhancing mechanical and surface properties, as well as serving as a pretreatment for subsequent surface engineering. Unfortunately, their fabrication on high-strength and low-ductility metal surface poses a significant challenge due to the prevalent issue of process-induced surface damage. In this study, we report the successful fabrication of a gradient nanostructured surface layer with low roughness (Ra ~ 0.17 μm) on high-strength 38CrMoAl steel through an optimized ultrasonic severe surface rolling (USSR) processing. By systematically varying the tempering temperature of quenched-and-tempered samples, the strength and ductility of the 38CoMoAl steel are tailored to facilitate gradient nanostructure formation. Microstructural analysis via advanced electron microscopy reveals the gradient nanostructure features progressively coarser martensite/ferrite grains and decreasing dislocation density along the depth. As the tempering temperature increases from 600 °C to 700 °C, the yield strength of 38CrMoAl steel decreases from 915 ± 16 MPa to 815 ± 16 MPa, while the elongation increases from 18.7 ± 0.6 to 27.3 ± 1.2%, resulting in an increase in the thickness of the gradient nanostructured surface layer from 300 μm to 400 μm. Following USSR processing, samples tempered at 600 °C, 650 °C, and 700 °C exhibit significant enhancements in surface hardness by 7.3%, 22.7%, and 21.5%, respectively, along with substantial reduction in wear volume by 73%, 78%, and 60%. USSR processing also leads to a reduction in coefficient of friction. This work provides valuable insights into the fabrication of high-quality gradient nanostructures on high-strength, low-ductility metallic materials.
- Open Access
Gradient Dual-Phase Structure Design in Brass: A New Strategy for Balancing Mechanical and Tribological Properties
This study introduces a novel gradient dual-phase structure design in brass, achieved through ultrasonic severe surface rolling (USSR) processing, which enables an unconventional asymmetric bilayer structure—comprising a hardened surface layer (>1 mm thick) and a ductile substrate—distinct from conventional hard-soft-hard sandwich configurations in gradient nanostructured materials. Microstructural characterization reveals a gradient dual-phase (α + β′) structure in the hardened layer, progressively transitioning into a homogenized dual-phase structure in the substrate. This unique architecture endows the USSR brass with exceptional mechanical properties, including a yield strength of 582.4 ± 31.0 MPa, ultimate tensile strength of 775.3 ± 33.9 MPa, and retained ductility (9.3 ± 1.0%), demonstrating an outstanding strength-ductility synergy. The USSR brass also demonstrates superior wear resistance with a 42.32% reduction in wear volume and 40.82% decrease in coefficient of friction compared to its as-received counterpart under oil lubrication. This architectural paradigm establishes a robust framework for engineering high-performance brass that simultaneously achieve an exceptional strength-ductility balance and enhanced wear resistance.
Open AccessGradient Dual-Phase Structure Design in Brass: A New Strategy for Balancing Mechanical and Tribological Properties
This study introduces a novel gradient dual-phase structure design in brass, achieved through ultrasonic severe surface rolling (USSR) processing, which enables an unconventional asymmetric bilayer structure—comprising a hardened surface layer (>1 mm thick) and a ductile substrate—distinct from conventional hard-soft-hard sandwich configurations in gradient nanostructured materials. Microstructural characterization reveals a gradient dual-phase (α + β′) structure in the hardened layer, progressively transitioning into a homogenized dual-phase structure in the substrate. This unique architecture endows the USSR brass with exceptional mechanical properties, including a yield strength of 582.4 ± 31.0 MPa, ultimate tensile strength of 775.3 ± 33.9 MPa, and retained ductility (9.3 ± 1.0%), demonstrating an outstanding strength-ductility synergy. The USSR brass also demonstrates superior wear resistance with a 42.32% reduction in wear volume and 40.82% decrease in coefficient of friction compared to its as-received counterpart under oil lubrication. This architectural paradigm establishes a robust framework for engineering high-performance brass that simultaneously achieve an exceptional strength-ductility balance and enhanced wear resistance.
- Open Access
- 20 March 2025
- Published by Elsevier in Chinese Journal of Mechanical Engineering
- Vol. 38 (1) , 1-10
Unveiling the Deformation Mechanism of High-Strength Low-Alloy Structural Steel with Gradient Dislocation-Cell Structure
- 20 March 2025
- Published by Elsevier in Chinese Journal of Mechanical Engineering
- Vol. 38 (1) , 1-10
Open AccessUnveiling the Deformation Mechanism of High-Strength Low-Alloy Structural Steel with Gradient Dislocation-Cell Structure
- 1 January 2024
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 60 (6) , 227-235
Preparation, Microstructure and Properties of High-performance Gradient Nanostructured Pure Ti Plate by USSR
- 1 January 2024
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 60 (6) , 227-235
Preparation, Microstructure and Properties of High-performance Gradient Nanostructured Pure Ti Plate by USSR
- Open Access
- 17 April 2023
- Published by Hindawi Limited in Scanning
- Vol. 2023, 1-7
Microstructure and Mechanical Properties of Gradient Nanostructured Q345 Steel Prepared by Ultrasonic Severe Surface Rolling
In this work, ultrasonic severe surface rolling (USSR), a new surface nanocrystallization technique, is used to prepare gradient nanostructure (GNS) on the commercial Q345 structural steel. The microstructure of the GNS surface layer is characterized by employing EBSD and TEM, and the result indicates that a nanoscale substructure is formed at the topmost surface layer. The substructures are composed of subgrains and dislocation cells and have an average size of 309.4nm. The GNS surface layer after USSR processing for one pass has a thickness of approximately 300μm. The uniaxial tensile measurement indicates that the yield strength of the USSR sample improves by 25.1 compared to the as-received sample with slightly decreased ductility. The nanoscale substructure, refined grains, high density of dislocations, and hetero-deformation-induced strengthening are identified as responsible for the enhanced strength. This study provides a feasible approach to improving the mechanical properties of structural steel for wide applications.
- 17 April 2023
- Published by Hindawi Limited in Scanning
- Vol. 2023, 1-7
Open AccessMicrostructure and Mechanical Properties of Gradient Nanostructured Q345 Steel Prepared by Ultrasonic Severe Surface Rolling
In this work, ultrasonic severe surface rolling (USSR), a new surface nanocrystallization technique, is used to prepare gradient nanostructure (GNS) on the commercial Q345 structural steel. The microstructure of the GNS surface layer is characterized by employing EBSD and TEM, and the result indicates that a nanoscale substructure is formed at the topmost surface layer. The substructures are composed of subgrains and dislocation cells and have an average size of 309.4nm. The GNS surface layer after USSR processing for one pass has a thickness of approximately 300μm. The uniaxial tensile measurement indicates that the yield strength of the USSR sample improves by 25.1 compared to the as-received sample with slightly decreased ductility. The nanoscale substructure, refined grains, high density of dislocations, and hetero-deformation-induced strengthening are identified as responsible for the enhanced strength. This study provides a feasible approach to improving the mechanical properties of structural steel for wide applications.
- Open Access
Corrosion Behavior in Hydrochloric Acid of Pure Titanium after Ultrasonic Severe Surface Rolling
Designing a gradient nanostructure is regarded as an effective strategy for strengthening commercial pure Ti without seriously sacrificing ductility. However, the corrosion behavior of the gradient nanostructured (GNS) pure Ti is far from clear, especially in reducing acid in which pure Ti shows poor corrosion resistance. The present paper aims at investigating the corrosion behavior of GNS pure Ti in hydrochloric acid by electrochemical method. The GNS surface layer is produced by a recently developed method called ultrasonic severe surface rolling. The GNS pure Ti exhibits spontaneous passivation behavior as well as the coarse-grained one in 1 M HCl. Due to the GNS surface layer, the corrosion current density and passive current density decrease by 70% and 54%, respectively, giving rise to significantly enhanced corrosion resistance and passivation ability. The better corrosion resistance is believed to be ascribed to the high-density grain boundaries and dislocations induced by the surface nano-grained structure as well as the smooth surface with few surface defects. The USSR processing also enlarges the static water contact angle of the pure Ti to 61.0 ± 0.3°.
Open AccessCorrosion Behavior in Hydrochloric Acid of Pure Titanium after Ultrasonic Severe Surface Rolling
Designing a gradient nanostructure is regarded as an effective strategy for strengthening commercial pure Ti without seriously sacrificing ductility. However, the corrosion behavior of the gradient nanostructured (GNS) pure Ti is far from clear, especially in reducing acid in which pure Ti shows poor corrosion resistance. The present paper aims at investigating the corrosion behavior of GNS pure Ti in hydrochloric acid by electrochemical method. The GNS surface layer is produced by a recently developed method called ultrasonic severe surface rolling. The GNS pure Ti exhibits spontaneous passivation behavior as well as the coarse-grained one in 1 M HCl. Due to the GNS surface layer, the corrosion current density and passive current density decrease by 70% and 54%, respectively, giving rise to significantly enhanced corrosion resistance and passivation ability. The better corrosion resistance is believed to be ascribed to the high-density grain boundaries and dislocations induced by the surface nano-grained structure as well as the smooth surface with few surface defects. The USSR processing also enlarges the static water contact angle of the pure Ti to 61.0 ± 0.3°.
- Open Access
Preparing Thick Gradient Surface Layer in Cu-Zn Alloy via Ultrasonic Severe Surface Rolling for Strength-Ductility Balance
A gradient structure (GS) design is a prominent strategy for strength-ductility balance in metallic materials, including Cu alloys. However, producing a thick GS surface layer without surface damage is still a challenging task limited by the available processing technology. In this work, a gradient structure (GS) surface layer with a thickness at the millimeter scale is produced in the Cu-38 wt.% Zn alloy using ultrasonic severe surface rolling technology at room temperature. The GS surface layer is as thick as 1.1 mm and involves the gradient distribution of grain size and dislocation density. The grain size is refined to 153.5 nm in the topmost surface layer and gradually increases with increasing depth. Tensile tests indicate that the single-sided USSR processed alloy exhibits balanced strength (467.5 MPa in yield strength) and ductility (10.7% in uniform elongation). Tailoring the volume fraction of the GS surface layer can tune the combination of strength and ductility in a certain range. The high strength of GS surface layer mainly stems from the high density of grain boundaries, dislocations and dislocation structures, deformation twins, and GS-induced synergistic strengthening effect. Our study elucidates the effect of the thick GS surface layer on strength and ductility, and provides a novel pathway for optimizing the strength-ductility combination of Cu alloys.
Open AccessPreparing Thick Gradient Surface Layer in Cu-Zn Alloy via Ultrasonic Severe Surface Rolling for Strength-Ductility Balance
A gradient structure (GS) design is a prominent strategy for strength-ductility balance in metallic materials, including Cu alloys. However, producing a thick GS surface layer without surface damage is still a challenging task limited by the available processing technology. In this work, a gradient structure (GS) surface layer with a thickness at the millimeter scale is produced in the Cu-38 wt.% Zn alloy using ultrasonic severe surface rolling technology at room temperature. The GS surface layer is as thick as 1.1 mm and involves the gradient distribution of grain size and dislocation density. The grain size is refined to 153.5 nm in the topmost surface layer and gradually increases with increasing depth. Tensile tests indicate that the single-sided USSR processed alloy exhibits balanced strength (467.5 MPa in yield strength) and ductility (10.7% in uniform elongation). Tailoring the volume fraction of the GS surface layer can tune the combination of strength and ductility in a certain range. The high strength of GS surface layer mainly stems from the high density of grain boundaries, dislocations and dislocation structures, deformation twins, and GS-induced synergistic strengthening effect. Our study elucidates the effect of the thick GS surface layer on strength and ductility, and provides a novel pathway for optimizing the strength-ductility combination of Cu alloys.
- 13 July 2022
- Published by Springer Nature in International Journal of Minerals, Metallurgy and Materials
- Vol. 29 (8) , 1551-1558
Simultaneously improving mechanical properties and corrosion resistance of as-cast AZ91 Mg alloy by ultrasonic surface rolling
- 13 July 2022
- Published by Springer Nature in International Journal of Minerals, Metallurgy and Materials
- Vol. 29 (8) , 1551-1558
Simultaneously improving mechanical properties and corrosion resistance of as-cast AZ91 Mg alloy by ultrasonic surface rolling
- 8 April 2021
- Published by Springer Nature in Acta Mechanica Solida Sinica
- Vol. 34 (4) , 506-515
Stress Relaxation Behaviors of Monocrystalline Silicon Coated with Amorphous SiO$_{2}$ Film: A Molecular Dynamics Study- 8 April 2021
- Published by Springer Nature in Acta Mechanica Solida Sinica
- Vol. 34 (4) , 506-515
Stress Relaxation Behaviors of Monocrystalline Silicon Coated with Amorphous SiO$_{2}$ Film: A Molecular Dynamics Study