Mengmeng Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mengmeng Zhang has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Haojie Ren
State Key Laboratory of Ocean Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
3 shared publications - Shixiao Fu
Shanghai Jiao Tong University
3 shared publications - Zhaolong Han
School of Ocean and Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
3 shared publications - Dai Zhou
State Key Laboratory of Ocean Engineering, School of Ocean and Civil Engineering, Shanghai Jiao Tong University 1 , Shanghai 200240
2 shared publications - Hongbo Zhu
State Key Laboratory of Ocean Engineering, School of Ocean and Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
2 shared publications - Shengyu Shi2 shared publications
Latest Publications
- 1 July 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (7)
Experimental study on vortex-induced vibration suppression of straight-fin helical strakes and traditional continuous helical strakes
Vortex-induced vibration (VIV) critically accelerates cumulative fatigue failure in marine risers. Traditional helical strakes effectively suppress VIV but induce substantial drag penalties and pose manufacturing challenges due to their complex three-dimensional structure. To address these limitations, a new type of straight-fin helical strake was proposed in this study to balance VIV suppression, drag penalty, and ease of manufacturing. Experimental investigations compared the VIV response of a cylinder with both strake types and without strakes. Hydrodynamic coefficients were calculated using the least squares method based on the energy competition model, and a linear drag prediction model was proposed to quantitatively correlate the drag coefficient with vibration amplitude. The experimental results showed that both strake types provide effective VIV suppression, reducing the excitation coefficient CEY to near-zero under most conditions and narrowing the variation of the added mass coefficient Cmey. Notably, the proposed straight-fin helical strake with a pitch of 17.5D (D is the cylinder diameter) matches the VIV suppression performance of conventional designs. Crucially, it exhibits a better hydrodynamic efficiency, characterized by a lower drag coefficient CD and baseline drag coefficient CD0 within the proposed drag model. The suppression performance of the straight-fin configuration exhibits a sensitivity to the pitch, with the frequency lock-in phenomenon eliminated exclusively at higher pitch. This study validates the 17.5D-pitch straight-fin helical strake as a promising alternative for deep-sea riser applications, offering comparable VIV suppression efficiency alongside a reduced drag penalty.
- 1 July 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (7)
Experimental study on vortex-induced vibration suppression of straight-fin helical strakes and traditional continuous helical strakes
Vortex-induced vibration (VIV) critically accelerates cumulative fatigue failure in marine risers. Traditional helical strakes effectively suppress VIV but induce substantial drag penalties and pose manufacturing challenges due to their complex three-dimensional structure. To address these limitations, a new type of straight-fin helical strake was proposed in this study to balance VIV suppression, drag penalty, and ease of manufacturing. Experimental investigations compared the VIV response of a cylinder with both strake types and without strakes. Hydrodynamic coefficients were calculated using the least squares method based on the energy competition model, and a linear drag prediction model was proposed to quantitatively correlate the drag coefficient with vibration amplitude. The experimental results showed that both strake types provide effective VIV suppression, reducing the excitation coefficient CEY to near-zero under most conditions and narrowing the variation of the added mass coefficient Cmey. Notably, the proposed straight-fin helical strake with a pitch of 17.5D (D is the cylinder diameter) matches the VIV suppression performance of conventional designs. Crucially, it exhibits a better hydrodynamic efficiency, characterized by a lower drag coefficient CD and baseline drag coefficient CD0 within the proposed drag model. The suppression performance of the straight-fin configuration exhibits a sensitivity to the pitch, with the frequency lock-in phenomenon eliminated exclusively at higher pitch. This study validates the 17.5D-pitch straight-fin helical strake as a promising alternative for deep-sea riser applications, offering comparable VIV suppression efficiency alongside a reduced drag penalty.
- 1 March 2026
- Published by Elsevier in Ocean Engineering
- Vol. 353
Experimental investigation on vortex-induced vibration of a free-hanging flexible riser under different bottom clump weights
- 1 March 2026
- Published by Elsevier in Ocean Engineering
- Vol. 353
Experimental investigation on vortex-induced vibration of a free-hanging flexible riser under different bottom clump weights
- 1 November 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
The interfering flow-induced vibration (FIV) characteristics of three unequal-diameter flexible risers in right-triangle arrangement
Because of hydrodynamic interference among risers, riser bundles exhibit more complex flow-induced vibration (FIV) than single riser. This study experimentally investigates the FIV characteristics of three flexible risers with unequal diameters in right-triangle arrangement under uniform flow. The larger-diameter riser (LR) is placed tandem to smaller-diameter riser 1 (SR1) and side-by-side with smaller-diameter riser 2 (SR2). Within Reynolds number (Re) ranges of 2832−11 328 (LR) and 1805−7220 (SR1/SR2), the FIV response characteristics of riser models in the cross-flow (CF) and in-line (IL) directions are further analyzed using modal superposition and fatigue damage estimation methods. The strain and displacement of SR2 exhibit significant amplitude amplification in the CF direction due to the proximity interference from LR and SR1, leading to substantially increased fatigue damage in prototype riser. In the tandem pair of LR and SR1, frequency capture of SR1 by LR is observed, along with reduced mean drag displacement and increased vibration amplitudes in both CF and IL directions. Additionally, higher pretension reduces CF vibration amplitudes, further affecting fatigue damage.
- 1 November 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
The interfering flow-induced vibration (FIV) characteristics of three unequal-diameter flexible risers in right-triangle arrangement
Because of hydrodynamic interference among risers, riser bundles exhibit more complex flow-induced vibration (FIV) than single riser. This study experimentally investigates the FIV characteristics of three flexible risers with unequal diameters in right-triangle arrangement under uniform flow. The larger-diameter riser (LR) is placed tandem to smaller-diameter riser 1 (SR1) and side-by-side with smaller-diameter riser 2 (SR2). Within Reynolds number (Re) ranges of 2832−11 328 (LR) and 1805−7220 (SR1/SR2), the FIV response characteristics of riser models in the cross-flow (CF) and in-line (IL) directions are further analyzed using modal superposition and fatigue damage estimation methods. The strain and displacement of SR2 exhibit significant amplitude amplification in the CF direction due to the proximity interference from LR and SR1, leading to substantially increased fatigue damage in prototype riser. In the tandem pair of LR and SR1, frequency capture of SR1 by LR is observed, along with reduced mean drag displacement and increased vibration amplitudes in both CF and IL directions. Additionally, higher pretension reduces CF vibration amplitudes, further affecting fatigue damage.
- 1 February 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (2)
Vortex-induced vibration features of a flexible pipe with a low mass ratio at subcritical Reynolds numbers
A new type of riser, such as the thermoplastic composite pipe, features a low mass ratio and is becoming increasingly common in marine engineering projects. However, vortex-induced vibration (VIV) poses a significant concern regarding fatigue damage in risers, and VIV understandings of risers with low mass ratios are still limited and require further investigation. The present study conducted experimental research on a flexible pipe with a critical mass ratio of 0.50 at subcritical Reynolds numbers (Re) through towing in still water. The displacement responses were reconstructed using modal superposition methods. The amplitude, frequency, and phase difference between in-line (IL) flow and cross-flow (CF) directions, motion trajectory, and fatigue damage are analyzed. The results indicate that the unexpectedly larger VIV amplitude with over 1.0 D appears in the IL direction, which is compared to that found in the CF direction. Such higher response amplitude in the IL direction leads to increased fatigue damage. Additionally, the VIVs in both IL and CF directions exhibit no apparent frequency lock-in phenomenon. The frequencies of the VIVs between the IL and CF directions maintain a twice relationship, and the motion trajectory follows a typical “8”-shaped pattern. The present work provides a basic understanding of VIVs in risers with critical mass ratios and offers helpful guidelines for the design of marine risers in engineering applications.
- 1 February 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (2)
Vortex-induced vibration features of a flexible pipe with a low mass ratio at subcritical Reynolds numbers
A new type of riser, such as the thermoplastic composite pipe, features a low mass ratio and is becoming increasingly common in marine engineering projects. However, vortex-induced vibration (VIV) poses a significant concern regarding fatigue damage in risers, and VIV understandings of risers with low mass ratios are still limited and require further investigation. The present study conducted experimental research on a flexible pipe with a critical mass ratio of 0.50 at subcritical Reynolds numbers (Re) through towing in still water. The displacement responses were reconstructed using modal superposition methods. The amplitude, frequency, and phase difference between in-line (IL) flow and cross-flow (CF) directions, motion trajectory, and fatigue damage are analyzed. The results indicate that the unexpectedly larger VIV amplitude with over 1.0 D appears in the IL direction, which is compared to that found in the CF direction. Such higher response amplitude in the IL direction leads to increased fatigue damage. Additionally, the VIVs in both IL and CF directions exhibit no apparent frequency lock-in phenomenon. The frequencies of the VIVs between the IL and CF directions maintain a twice relationship, and the motion trajectory follows a typical “8”-shaped pattern. The present work provides a basic understanding of VIVs in risers with critical mass ratios and offers helpful guidelines for the design of marine risers in engineering applications.
- 1 February 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (2)
Reconstruction of the solid–liquid two-phase flow field in the pipeline based on limited pipeline wall information
Pipeline hydraulic transportation is the primary method for transporting deep-sea mineral resources and fossil fuels. Pipeline blockage often causes excessive pressure in the pipeline, leading to pipeline breakage or even cargo leakage, which severely impacts transportation safety and can easily trigger secondary disasters. Therefore, clarifying the global flow field within pipelines, such as particle distribution, is crucial for monitoring and controlling pipeline systems. This study uses a limited number of easily measurable pipeline wall sensor pressure values as inputs of deep learning models for flow field reconstruction, with the global flow field of solid–liquid two-phase flow in the three-dimensional pipeline as the output. Three model frameworks from existing studies are summarized, and their reconstruction effects are compared. Based on this, a new framework is proposed. It expands the low-dimensional sensor pressure values to the same size as the global flow field using a pseudo-decoder and then processes them through an autoencoder. The results indicate that the new framework achieves further accuracy improvements compared to the previous three frameworks, with R2 and mean squared error reaching 0.933 and 5.13 ×10−4, respectively. Additionally, the effects of the skip connection configuration of the model, dataset size, and model learning rate, as well as the number and arrangement of pressure sensors on reconstruction accuracy, are investigated. Finally, the transferability of the model is demonstrated by reconstructing the pressure and fluid velocity fields of the pipeline two-phase flow.
- 1 February 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (2)
Reconstruction of the solid–liquid two-phase flow field in the pipeline based on limited pipeline wall information
Pipeline hydraulic transportation is the primary method for transporting deep-sea mineral resources and fossil fuels. Pipeline blockage often causes excessive pressure in the pipeline, leading to pipeline breakage or even cargo leakage, which severely impacts transportation safety and can easily trigger secondary disasters. Therefore, clarifying the global flow field within pipelines, such as particle distribution, is crucial for monitoring and controlling pipeline systems. This study uses a limited number of easily measurable pipeline wall sensor pressure values as inputs of deep learning models for flow field reconstruction, with the global flow field of solid–liquid two-phase flow in the three-dimensional pipeline as the output. Three model frameworks from existing studies are summarized, and their reconstruction effects are compared. Based on this, a new framework is proposed. It expands the low-dimensional sensor pressure values to the same size as the global flow field using a pseudo-decoder and then processes them through an autoencoder. The results indicate that the new framework achieves further accuracy improvements compared to the previous three frameworks, with R2 and mean squared error reaching 0.933 and 5.13 ×10−4, respectively. Additionally, the effects of the skip connection configuration of the model, dataset size, and model learning rate, as well as the number and arrangement of pressure sensors on reconstruction accuracy, are investigated. Finally, the transferability of the model is demonstrated by reconstructing the pressure and fluid velocity fields of the pipeline two-phase flow.
- 1 May 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (5)
Experimental investigation on fluid-induced vibration of a semi-submerged flexible pipe in oncoming flows
Fluid-induced vibration (FIV) features of the semi-submerged flexible pipe in an oncoming flow are experimentally investigated in this paper. The flexible pipe is towed to simulate the equivalent uniform oncoming flow with a Froude number (Fr) ranging from 0.2 to 2.5. The overtopping states are determined and divided into three regions by the Fr numbers, including non-overtopping, intermitting overtopping, and continuous overtopping regions. Through the displacement reconstruction and wavelet transform methods, the displacement response, frequency, trajectory, and the chaotic characteristics of the semi-submerged pipe are studied. The results show that the FIV displacement responses are evidently affected by the intensity of the overtopping phenomenon. A significant mean displacement in the cross flow (CF) direction can be seen and a maximum value of 0.88D can be reached. The unexpectedly larger FIVs with standard deviation values of around 0.52D can be witnessed in the in-line (IL) direction than those for a fully submerged pipe. Moreover, the FIV frequency response in the IL direction is found to be consistent with that in the CF direction under intermitting overtopping and continuous overtopping state, and the corresponding Strouhal numbers are 0.24 and 0.28, respectively. The FIV response is found to be chaotic in non-overtopping states, while it behaves periodic and quasiperiodic features as overtopping occurs. The “O” shape of the motion trajectory is observed at such overtopping regions. The present work improves the basic understanding of the FIV features of the semi-submerged flexible pipe in the oncoming flow and can provide useful references for designing the relevant marine structures.
- 1 May 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (5)
Experimental investigation on fluid-induced vibration of a semi-submerged flexible pipe in oncoming flows
Fluid-induced vibration (FIV) features of the semi-submerged flexible pipe in an oncoming flow are experimentally investigated in this paper. The flexible pipe is towed to simulate the equivalent uniform oncoming flow with a Froude number (Fr) ranging from 0.2 to 2.5. The overtopping states are determined and divided into three regions by the Fr numbers, including non-overtopping, intermitting overtopping, and continuous overtopping regions. Through the displacement reconstruction and wavelet transform methods, the displacement response, frequency, trajectory, and the chaotic characteristics of the semi-submerged pipe are studied. The results show that the FIV displacement responses are evidently affected by the intensity of the overtopping phenomenon. A significant mean displacement in the cross flow (CF) direction can be seen and a maximum value of 0.88D can be reached. The unexpectedly larger FIVs with standard deviation values of around 0.52D can be witnessed in the in-line (IL) direction than those for a fully submerged pipe. Moreover, the FIV frequency response in the IL direction is found to be consistent with that in the CF direction under intermitting overtopping and continuous overtopping state, and the corresponding Strouhal numbers are 0.24 and 0.28, respectively. The FIV response is found to be chaotic in non-overtopping states, while it behaves periodic and quasiperiodic features as overtopping occurs. The “O” shape of the motion trajectory is observed at such overtopping regions. The present work improves the basic understanding of the FIV features of the semi-submerged flexible pipe in the oncoming flow and can provide useful references for designing the relevant marine structures.
- Open Access
- 1 July 2023
- Published by AIP Publishing in AIP Advances
- Vol. 13 (7)
A homotopy analysis method for forced transverse vibrations of simply supported double-beam systems with a nonlinear inner layer
The present study introduces a novel algorithm based on the homotopy analysis method (HAM) to efficiently solve the equation of motion of simply supported transversely and axially loaded double-beam systems. The original HAM was developed for single partial differential equations (PDEs); the current formulation applies to systems of PDEs. The system of PDEs is derived by modeling two prismatic beams interconnected by a nonlinear inner layer as Euler–Bernoulli beams. We employ the Bubnov–Galerkin technique to turn the PDEs’ system into a system of ordinary differential equations that is further solved with the HAM. The flexibility and straightforwardness of the HAM in computing time-dependent components of the system’s transverse deflection and natural frequencies, in conjunction with the observed fast convergence, offer a robust semi-analytical method for analyzing such systems. Finally, the transverse deflection is built through the modal superposition principle. Thanks to a judicious and high-flexibility selection of initial guesses and convergence control parameters, numerical examples confirm that at most six iterations are needed to achieve convergence, and the results are consistent with the selected benchmark cases.
- 1 July 2023
- Published by AIP Publishing in AIP Advances
- Vol. 13 (7)
Open AccessA homotopy analysis method for forced transverse vibrations of simply supported double-beam systems with a nonlinear inner layer
The present study introduces a novel algorithm based on the homotopy analysis method (HAM) to efficiently solve the equation of motion of simply supported transversely and axially loaded double-beam systems. The original HAM was developed for single partial differential equations (PDEs); the current formulation applies to systems of PDEs. The system of PDEs is derived by modeling two prismatic beams interconnected by a nonlinear inner layer as Euler–Bernoulli beams. We employ the Bubnov–Galerkin technique to turn the PDEs’ system into a system of ordinary differential equations that is further solved with the HAM. The flexibility and straightforwardness of the HAM in computing time-dependent components of the system’s transverse deflection and natural frequencies, in conjunction with the observed fast convergence, offer a robust semi-analytical method for analyzing such systems. Finally, the transverse deflection is built through the modal superposition principle. Thanks to a judicious and high-flexibility selection of initial guesses and convergence control parameters, numerical examples confirm that at most six iterations are needed to achieve convergence, and the results are consistent with the selected benchmark cases.