Arumugam Geetha
Research Subjects
Arumugam Geetha has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Pachagoundanpalayam Nachimuthugounder Palanisamy
Department of Chemistry, Annamalai University, Annamalainagar 608002, India
7 shared publications M. Sujatha
Department of Chemistry, Kongu Engg. College, Erode, Tamilnadu-638 052, India
3 shared publications- Palanivel Sivakumar
Department of ECE, Dr. N.G.P Institute of Technology, Coimbatore, India
3 shared publications Helmut Bertagnolli
University of Stuttgart
2 shared publications- Venkata Krishnan
School of Chemical Sciences and Advanced Materials Research Center Indian Institute of Technology Mandi Mandi Himachal Pradesh India
2 shared publications A Revathi
1 shared publication
Latest Publications
- Open Access
- 1 May 2026
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 24 (5) , 615-634
A comparative study on green synthesis of zinc oxide nanoparticles from agricultural wastes for Rhodamine B dye removal intending for sustainable water management
The paper reports the synthesis of zinc oxide nanoparticles papaya seeds, garlic peels and bitter gourd peels as green reducing agents is reported in the paper. The analysis of the UV–vis revealed that the nanoparticles were formed as the absorption peaks were observed at the 372 nm (PS-ZnO), 369 nm (GP-ZnO), and 365 nm (BG-ZnO), indicating a bandgap of 3.34–3.40 eV. The performance of the adsorption in terms of Rhodamine B dye was assessed with the variation of pH, contact time and initial concentration. ZnO derived using papaya seeds demonstrated the best efficiency with more than 90 % of the dye being removed, then garlic-peel ZnO (around 85 %) and bitter-gourd ZnO (around 75 %) at the best conditions (pH 3 and 30 min contact time). Adsorption was well fitted by the Langmuir isotherm (monolayer adsorption) and kinetics were best described by a pseudo-second-order model, which is indicative of chemisorption. The results indicate that agricultural waste-derived ZnO nanoparticles can serve as cost-effective, environmentally friendly, and efficient adsorbents to eliminate toxic dyes in wastewater, which can make sustainable wastewater management of the environment sustainable.
- 1 May 2026
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 24 (5) , 615-634
Open AccessA comparative study on green synthesis of zinc oxide nanoparticles from agricultural wastes for Rhodamine B dye removal intending for sustainable water management
The paper reports the synthesis of zinc oxide nanoparticles papaya seeds, garlic peels and bitter gourd peels as green reducing agents is reported in the paper. The analysis of the UV–vis revealed that the nanoparticles were formed as the absorption peaks were observed at the 372 nm (PS-ZnO), 369 nm (GP-ZnO), and 365 nm (BG-ZnO), indicating a bandgap of 3.34–3.40 eV. The performance of the adsorption in terms of Rhodamine B dye was assessed with the variation of pH, contact time and initial concentration. ZnO derived using papaya seeds demonstrated the best efficiency with more than 90 % of the dye being removed, then garlic-peel ZnO (around 85 %) and bitter-gourd ZnO (around 75 %) at the best conditions (pH 3 and 30 min contact time). Adsorption was well fitted by the Langmuir isotherm (monolayer adsorption) and kinetics were best described by a pseudo-second-order model, which is indicative of chemisorption. The results indicate that agricultural waste-derived ZnO nanoparticles can serve as cost-effective, environmentally friendly, and efficient adsorbents to eliminate toxic dyes in wastewater, which can make sustainable wastewater management of the environment sustainable.
- 28 November 2024
- Published by Kaunas University of Technology (KTU) in Materials Science
- Vol. 30 (4) , 480-485
Development of a Novel Wear Equation by Comparing the Wear Behaviour of Hard (AA7075) and Soft (AA6063) Hybrid Composite Materials
In this research, aluminium alloys AA7075 and AA6063 were reinforced with aluminium oxide and titanium oxide particles fabricated through stir casting. The Archard equation was used to model wear behavior, with the wear rate and hardness ratios determined experimentally. The addition of reinforcing particles improves hardness and wear resistance by impeding dislocation movement and refining grain size. At higher temperatures, a protective oxide layer forms, reducing wear. The wear rate decreases with increasing reinforcement percentage and increases with sliding distance. AA7075 exhibits lower wear rates than AA6063, especially at higher temperatures, due to its higher hardness. The developed wear equation in this study relates the wear rates of harder (AA7075) and softer (AA6063) composite materials by considering factors such as % reinforcement, load, sliding distance, velocity, and temperature. The equation considers the change in the wear rate of aluminium composites with respect to temperature, represented by dv/dT and accounts for the effect of temperature on wear behavior through the temperature coefficients (ɑ and β). The equation takes into deliberation the impact of these parameters on wear behavior, offering a mathematical foundation for understanding and comparing wear performance across different materials.
- 28 November 2024
- Published by Kaunas University of Technology (KTU) in Materials Science
- Vol. 30 (4) , 480-485
Development of a Novel Wear Equation by Comparing the Wear Behaviour of Hard (AA7075) and Soft (AA6063) Hybrid Composite Materials
In this research, aluminium alloys AA7075 and AA6063 were reinforced with aluminium oxide and titanium oxide particles fabricated through stir casting. The Archard equation was used to model wear behavior, with the wear rate and hardness ratios determined experimentally. The addition of reinforcing particles improves hardness and wear resistance by impeding dislocation movement and refining grain size. At higher temperatures, a protective oxide layer forms, reducing wear. The wear rate decreases with increasing reinforcement percentage and increases with sliding distance. AA7075 exhibits lower wear rates than AA6063, especially at higher temperatures, due to its higher hardness. The developed wear equation in this study relates the wear rates of harder (AA7075) and softer (AA6063) composite materials by considering factors such as % reinforcement, load, sliding distance, velocity, and temperature. The equation considers the change in the wear rate of aluminium composites with respect to temperature, represented by dv/dT and accounts for the effect of temperature on wear behavior through the temperature coefficients (ɑ and β). The equation takes into deliberation the impact of these parameters on wear behavior, offering a mathematical foundation for understanding and comparing wear performance across different materials.
- 22 May 2020
- Published by Engineering Skill Development in Gedrag & Organisatie
- Vol. 33 (2)
THE WATER QUALITY PARAMETERS OF SOME BORE WELLS IN EDAPPADI TALUK, SALEM DISTRICT, TAMILNADU
- 22 May 2020
- Published by Engineering Skill Development in Gedrag & Organisatie
- Vol. 33 (2)
THE WATER QUALITY PARAMETERS OF SOME BORE WELLS IN EDAPPADI TALUK, SALEM DISTRICT, TAMILNADU
- Open Access
- 1 September 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (43) , 20534-20543
Studies on adsorptive removal of Direct Green 6 using a non-conventional activated carbon and polypyrrole composite
Application of activated carbon (CSAC) and polypyrrole composite (PPC) developed from the precursor, fruit of the gardening plant material Cordia sebestena has been investigated for the removal of Direct Green 6 (DG6) from aqueous solution. Batch adsorption experiments were carried out using CSAC and PPC and a comparative study was also made. Effect of parameters, namely initial dye concentration, contact time, pH and temperature was studied. The kinetic studies were analysed with pseudo-first-order and pseudo-second-order models. Experimental isotherm data were also analysed with Langmuir and Freundlich adsorption isotherm models. Thermodynamic parameters were also measured. Experimental results showed that percentage removal of DG6 was higher with PPC than the percentage removal obtained by CSAC. Hence, it is proposed that PPC is superior and efficient adsorbent for the removal of DG6 from aqueous solutions.
- 1 September 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (43) , 20534-20543
Open AccessStudies on adsorptive removal of Direct Green 6 using a non-conventional activated carbon and polypyrrole composite
Application of activated carbon (CSAC) and polypyrrole composite (PPC) developed from the precursor, fruit of the gardening plant material Cordia sebestena has been investigated for the removal of Direct Green 6 (DG6) from aqueous solution. Batch adsorption experiments were carried out using CSAC and PPC and a comparative study was also made. Effect of parameters, namely initial dye concentration, contact time, pH and temperature was studied. The kinetic studies were analysed with pseudo-first-order and pseudo-second-order models. Experimental isotherm data were also analysed with Langmuir and Freundlich adsorption isotherm models. Thermodynamic parameters were also measured. Experimental results showed that percentage removal of DG6 was higher with PPC than the percentage removal obtained by CSAC. Hence, it is proposed that PPC is superior and efficient adsorbent for the removal of DG6 from aqueous solutions.
- Open Access
- 1 July 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (18) , 8406-8419
Equilibrium and kinetic studies for the adsorption of Basic Red 29 from aqueous solutions using activated carbon and conducting polymer composite
The paper deals with the study on application of activated carbon (Cordia sebestena activated carbon (CSAC)) and polypyrrole polymer composite prepared from the precursor fruit of the gardening plant material Cordia sebestena for the removal of cationic dye (basic dye namely Basic Red 29 (BR29)) from aqueous solutions. Adsorption experiments are carried out using batch system in order to do equilibrium adsorption isotherm, kinetics and thermodynamic studies. It is found that chemical modification of plant wastes like sawdust coated with polypyrrole called polypyrrole polymer composite is an efficient adsorbent for the removal of cationic dye BR29 from aqueous solutions when compared to activated carbon (CSAC).
- 1 July 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (18) , 8406-8419
Open AccessEquilibrium and kinetic studies for the adsorption of Basic Red 29 from aqueous solutions using activated carbon and conducting polymer composite
The paper deals with the study on application of activated carbon (Cordia sebestena activated carbon (CSAC)) and polypyrrole polymer composite prepared from the precursor fruit of the gardening plant material Cordia sebestena for the removal of cationic dye (basic dye namely Basic Red 29 (BR29)) from aqueous solutions. Adsorption experiments are carried out using batch system in order to do equilibrium adsorption isotherm, kinetics and thermodynamic studies. It is found that chemical modification of plant wastes like sawdust coated with polypyrrole called polypyrrole polymer composite is an efficient adsorbent for the removal of cationic dye BR29 from aqueous solutions when compared to activated carbon (CSAC).
- Open Access
- 1 January 2015
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 27 (8) , 2813-2818
Application of Activated Carbon and Polypyrrole Coated Sawdust for Adsorption of Acidic Dye from Aqueous Solutions: A Comparative Study
- 1 January 2015
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 27 (8) , 2813-2818
Open AccessApplication of Activated Carbon and Polypyrrole Coated Sawdust for Adsorption of Acidic Dye from Aqueous Solutions: A Comparative Study
- 1 April 2009
- Vol. 51 (2)
Adsorption of Cr(VI) and Pb(II) from aqueous solution using agricultural solid waste.
Areca nut shell, an agricultural solid waste by-product, has been studied for the removal of heavy metals Cr(VI) and Pb(II) from aqueous solution. Parameters, such as equilibrium time, effect of initial metal ion concentration, effect of pH on the removal, were analyzed. An initial pH of 4.0 was found most favourable for Cr(VI) removal and 5.0 for Pb(II) removal. Two theoretical isotherm models, namely Langmuir and Freundlich, were analyzed for the applicability of the experimental data. The Langmuir adsorption capacity (Q0) was calculated. The results of thermodynamic parameters suggest the exothermic nature of the adsorption. The desorption studies were carried out using dilute hydrochloric acid. Maximum desorption of 88% for Cr(VI) and 91% for Pb(II) were achieved. Areca nut shell waste, the low cost adsorbent is found to be effective in the removal of Cr(VI) and Pb(II) ions, and hence it can be applied for the removal of heavy metals from industrial wastewater.
- 1 April 2009
- Vol. 51 (2)
Adsorption of Cr(VI) and Pb(II) from aqueous solution using agricultural solid waste.
Areca nut shell, an agricultural solid waste by-product, has been studied for the removal of heavy metals Cr(VI) and Pb(II) from aqueous solution. Parameters, such as equilibrium time, effect of initial metal ion concentration, effect of pH on the removal, were analyzed. An initial pH of 4.0 was found most favourable for Cr(VI) removal and 5.0 for Pb(II) removal. Two theoretical isotherm models, namely Langmuir and Freundlich, were analyzed for the applicability of the experimental data. The Langmuir adsorption capacity (Q0) was calculated. The results of thermodynamic parameters suggest the exothermic nature of the adsorption. The desorption studies were carried out using dilute hydrochloric acid. Maximum desorption of 88% for Cr(VI) and 91% for Pb(II) were achieved. Areca nut shell waste, the low cost adsorbent is found to be effective in the removal of Cr(VI) and Pb(II) ions, and hence it can be applied for the removal of heavy metals from industrial wastewater.
- Open Access
- 1 January 2008
- Published by Hindawi Limited in E-Journal of Chemistry
- Vol. 5 (4) , 742-753
Orthophosphoric Acid Activated Babul Seed Carbon as an Adsorbent for the Removal of Methylene Blue
An Experimental and theoretical study has been conducted on the adsorption of methylene blue dye using activated carbon prepared from babul seed by chemical activation with orthophosphoric acid. BET surface area of the activated carbon was determined as 1060 m2/g. Adsorption kinetics, equilibrium and thermodynamics were investigated as a function of initial dye concentration, temperature and pH. First order Lagergren, pseudo-second order and Elovich kinetic models were used to test the adsorption kinetics. Results were analyzed by the Langmuir, Freundlich and Temkin isotherm models. Based on regression coefficient, the equilibrium data found fitted well to the Langmuir equilibrium model than other models. The characteristics of the prepared activated carbon were found comparable to the commercial activated carbon. It is found that the babul seed activated carbon is very effective for the removal of colouring matter.
- 1 January 2008
- Published by Hindawi Limited in E-Journal of Chemistry
- Vol. 5 (4) , 742-753
Open AccessOrthophosphoric Acid Activated Babul Seed Carbon as an Adsorbent for the Removal of Methylene Blue
An Experimental and theoretical study has been conducted on the adsorption of methylene blue dye using activated carbon prepared from babul seed by chemical activation with orthophosphoric acid. BET surface area of the activated carbon was determined as 1060 m2/g. Adsorption kinetics, equilibrium and thermodynamics were investigated as a function of initial dye concentration, temperature and pH. First order Lagergren, pseudo-second order and Elovich kinetic models were used to test the adsorption kinetics. Results were analyzed by the Langmuir, Freundlich and Temkin isotherm models. Based on regression coefficient, the equilibrium data found fitted well to the Langmuir equilibrium model than other models. The characteristics of the prepared activated carbon were found comparable to the commercial activated carbon. It is found that the babul seed activated carbon is very effective for the removal of colouring matter.
- Open Access
- 1 January 2008
- Published by Hindawi Limited in E-Journal of Chemistry
- Vol. 5 (4) , 696-705
Assessment of Underground Water Contamination and Effect of Textile Effluents on Noyyal River Basin In and Around Tiruppur Town, Tamilnadu
A systematic study has been carried out to assess the underground water contamination and the effect of textile effluents on Noyyal River basin in and around Tiruppur Town. Twenty six sampling locations were selected at random and the ground water samples were collected mostly from tube wells at Noyyal River basin in and around Tiruppur area. The samples were analyzed for major physical and chemical water quality parameters like pH, alkalinity, electrical conductivity (EC), total dissolved solids (TDS), total hardness (TH), Ca, Mg, Na, K, Cl & SO42-. It was found that the underground water quality was contaminated at few sampling sites due to the industrial discharge of the effluents on to the river or land from the Tiruppur town. The sampling sites namely Orathupalayam, Karuvapalayam, Kulathupalayam, Uttukuli and Kodumanalpudur showed high deviations in total alkalinity, total hardness, Ca, Mg and chloride concentrations. Hence our study concludes that the underground water quality study in this region shows a constant variation in different parameters in different periods (before and after monsoon). So it is highly important to take periodical monitoring of the underground water quality in this region for our future sustainability
- 1 January 2008
- Published by Hindawi Limited in E-Journal of Chemistry
- Vol. 5 (4) , 696-705
Open AccessAssessment of Underground Water Contamination and Effect of Textile Effluents on Noyyal River Basin In and Around Tiruppur Town, Tamilnadu
A systematic study has been carried out to assess the underground water contamination and the effect of textile effluents on Noyyal River basin in and around Tiruppur Town. Twenty six sampling locations were selected at random and the ground water samples were collected mostly from tube wells at Noyyal River basin in and around Tiruppur area. The samples were analyzed for major physical and chemical water quality parameters like pH, alkalinity, electrical conductivity (EC), total dissolved solids (TDS), total hardness (TH), Ca, Mg, Na, K, Cl & SO42-. It was found that the underground water quality was contaminated at few sampling sites due to the industrial discharge of the effluents on to the river or land from the Tiruppur town. The sampling sites namely Orathupalayam, Karuvapalayam, Kulathupalayam, Uttukuli and Kodumanalpudur showed high deviations in total alkalinity, total hardness, Ca, Mg and chloride concentrations. Hence our study concludes that the underground water quality study in this region shows a constant variation in different parameters in different periods (before and after monsoon). So it is highly important to take periodical monitoring of the underground water quality in this region for our future sustainability