Arun Kumar K N
Research Subjects
Arun Kumar K N has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
G. B. Krishnappa
Department of Mechanical Engineering, VVCE, Mysuru - 570002, India
2 shared publicationsG.B. Krishnappa
2 shared publicationsMohammed Salman Pasha
Department of Mechanical Engineering, VVCE, Mysuru - 570002, India
2 shared publicationsB. B. Ganesha
Department of Mechanical Engineering, Vidyavardhaka College of Engineering, Mysore, India
1 shared publication- B. B. Ganesha
VVCE
1 shared publication B. Vinod
Department of Mechanical Engineering, Vidyavardhaka College of Engineering, Mysore, India
1 shared publication
Latest Publications
- 16 December 2025
- Published by IOP Publishing in Engineering Research Express
- Vol. 7 (4) , 0455c5
Statistical optimization and cryogenic treatment effects on the wear behavior of stir-cast Al-SiC-Gr hybrid composites
Aluminum matrix composites are increasingly used in automotive and aerospace applications due to their superior strength-to-weight ratio and wear resistance; however, improving their tribological performance remains a key challenge. This study numerically investigates the wear behavior of Al6061–SiC–Gr hybrid composites fabricated by the stir casting method. The matrix alloy Al6061 was reinforced with 13 wt% Silicon Carbide (SiC) and Graphite (Gr) at 1, 2, and 3 wt% levels. Taguchi’s L16 orthogonal array was employed to design experiments considering reinforcement percentage, cryogenic treatment duration (0, 24, 36, and 48 h), load (10–40 N), sliding speed (600–1200 rpm), and sliding time (5–20 min) as factors. Wear scar depth and coefficient of friction were analyzed as responses. Results showed that the Al–13%SiC–2%Gr composite exhibited the best wear resistance with the lowest wear scar depth and coefficient of friction. A 36 h cryogenic treatment further enhanced performance through microstructural refinement and phase stabilization. Fractography confirmed uniform reinforcement dispersion and the lubricating effect of graphite. The study concludes that combining hybrid reinforcement with optimized cryogenic treatment significantly improves wear performance of aluminum composites. It is recommended for applications requiring high wear resistance, and the findings imply potential for extending component life in tribological systems.
- 16 December 2025
- Published by IOP Publishing in Engineering Research Express
- Vol. 7 (4) , 0455c5
Statistical optimization and cryogenic treatment effects on the wear behavior of stir-cast Al-SiC-Gr hybrid composites
Aluminum matrix composites are increasingly used in automotive and aerospace applications due to their superior strength-to-weight ratio and wear resistance; however, improving their tribological performance remains a key challenge. This study numerically investigates the wear behavior of Al6061–SiC–Gr hybrid composites fabricated by the stir casting method. The matrix alloy Al6061 was reinforced with 13 wt% Silicon Carbide (SiC) and Graphite (Gr) at 1, 2, and 3 wt% levels. Taguchi’s L16 orthogonal array was employed to design experiments considering reinforcement percentage, cryogenic treatment duration (0, 24, 36, and 48 h), load (10–40 N), sliding speed (600–1200 rpm), and sliding time (5–20 min) as factors. Wear scar depth and coefficient of friction were analyzed as responses. Results showed that the Al–13%SiC–2%Gr composite exhibited the best wear resistance with the lowest wear scar depth and coefficient of friction. A 36 h cryogenic treatment further enhanced performance through microstructural refinement and phase stabilization. Fractography confirmed uniform reinforcement dispersion and the lubricating effect of graphite. The study concludes that combining hybrid reinforcement with optimized cryogenic treatment significantly improves wear performance of aluminum composites. It is recommended for applications requiring high wear resistance, and the findings imply potential for extending component life in tribological systems.
- 27 April 2025
- Published by Springer Nature in Polymer Bulletin
- Vol. 82 (11) , 6139-6152
Investigation on swelling behavior of gamma irradiated and cryogenically treated PALF-reinforced polymer composite
- 27 April 2025
- Published by Springer Nature in Polymer Bulletin
- Vol. 82 (11) , 6139-6152
Investigation on swelling behavior of gamma irradiated and cryogenically treated PALF-reinforced polymer composite
- 1 August 2023
- Published by Springer Nature
- p. 145-154
Study on Effect of Pista Shell as Filler Material on Mechanical Performance of Banana Fiber Reinforced Polymer Composite
- 1 August 2023
- Published by Springer Nature
- p. 145-154
Study on Effect of Pista Shell as Filler Material on Mechanical Performance of Banana Fiber Reinforced Polymer Composite
- 26 July 2019
- Published by Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication (BEIESP) in International Journal of Innovative Technology and Exploring Engineering
- Vol. 8 (6S4) , 66-70
Design, Experiment and Fabrication of Multipurpose Stretcher for Patients
A multipurpose stretcher is an advanced stretcher where we can transfer patient from stretcher to bed with minimum human intervention. If we see go by conventional method accidents and comfortless to the patient is more. This paper describes the design and fabrication of a multipurpose Stretcher for patients. We are required to design and create a multipurpose Stretcher which uses gears and belts for lateral movement and hydraulic jacks for adjustment of the height of the beds. The stretcher will be controlled manually with a wheel for lead screw and an extension lever for hydraulic jacks using legs. Currently the stretcher is only designed for linear movement. However, plans to incorporate maneuverability and other functions can beimplemented after the first stage of the development achieves success.
- 26 July 2019
- Published by Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication (BEIESP) in International Journal of Innovative Technology and Exploring Engineering
- Vol. 8 (6S4) , 66-70
Design, Experiment and Fabrication of Multipurpose Stretcher for Patients
A multipurpose stretcher is an advanced stretcher where we can transfer patient from stretcher to bed with minimum human intervention. If we see go by conventional method accidents and comfortless to the patient is more. This paper describes the design and fabrication of a multipurpose Stretcher for patients. We are required to design and create a multipurpose Stretcher which uses gears and belts for lateral movement and hydraulic jacks for adjustment of the height of the beds. The stretcher will be controlled manually with a wheel for lead screw and an extension lever for hydraulic jacks using legs. Currently the stretcher is only designed for linear movement. However, plans to incorporate maneuverability and other functions can beimplemented after the first stage of the development achieves success.
- Open Access
- 9 January 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 144, 02020
A Study on Hardness and Wear behaviour of Untreated and Cryogenically Treated Al-SiC and Al-Gr Metal Matrix Composite
The present study aims at evaluating the hardness and wear behaviour of untreated and cryogenically treated aluminium-silicon carbide and aluminium graphite metal matrix composite. In this composite Al6061 is used as matrix material with varying Silicon carbide quantity from 2.5wt% to 10wt% and also varying the quantity of graphite from 1wt% to 4wt%. The composites used for this study were fabricated using stir casting technique. Electron dispersive X-ray spectroscopy and X-ray diffraction tests were carried out to know the composition and phase identification of the composite sample. Microstructure analysis was carried out to study the structure of the composites with and without cryogenic treatment. Hardness behaviour of a metal plays a vital role in understanding the resistance offered by a particular metal to the various shape changing forces and the ability of the metal to resist deformation. Similarly, wear is erosion of material from its original position on a solid surface performed by the action of any other material surface. It is very important to know the wear property of any given material in order to gain an understanding of the wear process, to determine the effects of variables, to characterize materials, and to select materials for specific applications.
- 9 January 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 144, 02020
Open AccessA Study on Hardness and Wear behaviour of Untreated and Cryogenically Treated Al-SiC and Al-Gr Metal Matrix Composite
The present study aims at evaluating the hardness and wear behaviour of untreated and cryogenically treated aluminium-silicon carbide and aluminium graphite metal matrix composite. In this composite Al6061 is used as matrix material with varying Silicon carbide quantity from 2.5wt% to 10wt% and also varying the quantity of graphite from 1wt% to 4wt%. The composites used for this study were fabricated using stir casting technique. Electron dispersive X-ray spectroscopy and X-ray diffraction tests were carried out to know the composition and phase identification of the composite sample. Microstructure analysis was carried out to study the structure of the composites with and without cryogenic treatment. Hardness behaviour of a metal plays a vital role in understanding the resistance offered by a particular metal to the various shape changing forces and the ability of the metal to resist deformation. Similarly, wear is erosion of material from its original position on a solid surface performed by the action of any other material surface. It is very important to know the wear property of any given material in order to gain an understanding of the wear process, to determine the effects of variables, to characterize materials, and to select materials for specific applications.
- Open Access
- 9 January 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 144, 02019
A Study on Tensile and Shear behaviour of Untreated and Cryogenically Treated Al-SiC and Al-Gr Metal Matrix Composite
The present study aims at evaluating the shear and tensile behaviour of untreated and cryogenically treated aluminium-silicon carbide and aluminium graphite metal matrix composite. In this composite Al6061 is used as matrix material with varying Silicon carbide quantity from 2.5wt% to 10wt% and also varying the quantity of graphite from 1wt% to 4wt%. The composites used for this study were fabricated using stir casting technique. Electron dispersive X-ray spectroscopy and X-ray diffraction tests were carried out to know the composition and phase identification of the composite sample. Microstructure analysis was carried out to study the structure of the composites with and without cryogenic treatment.
- 9 January 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 144, 02019
Open AccessA Study on Tensile and Shear behaviour of Untreated and Cryogenically Treated Al-SiC and Al-Gr Metal Matrix Composite
The present study aims at evaluating the shear and tensile behaviour of untreated and cryogenically treated aluminium-silicon carbide and aluminium graphite metal matrix composite. In this composite Al6061 is used as matrix material with varying Silicon carbide quantity from 2.5wt% to 10wt% and also varying the quantity of graphite from 1wt% to 4wt%. The composites used for this study were fabricated using stir casting technique. Electron dispersive X-ray spectroscopy and X-ray diffraction tests were carried out to know the composition and phase identification of the composite sample. Microstructure analysis was carried out to study the structure of the composites with and without cryogenic treatment.
- 1 January 2018
- Published by Elsevier in Materials Today: Proceedings
- Vol. 5 (1) , 904-910
An Experimental Investigation on Tensile and Compression BehaviorofAluminum, Silicon Carbide, and GraphiteHybrid Composite with and without Cryogenic Treatment
- 1 January 2018
- Published by Elsevier in Materials Today: Proceedings
- Vol. 5 (1) , 904-910
An Experimental Investigation on Tensile and Compression BehaviorofAluminum, Silicon Carbide, and GraphiteHybrid Composite with and without Cryogenic Treatment
- 1 January 2018
- Published by Elsevier in Materials Today: Proceedings
- Vol. 5 (1) , 916-921
An Experimental Investigation on Hardness and ShearBehaviorofAluminum, Silicon Carbide, and GraphiteHybrid Composite with and without Cryogenic Treatment
- 1 January 2018
- Published by Elsevier in Materials Today: Proceedings
- Vol. 5 (1) , 916-921
An Experimental Investigation on Hardness and ShearBehaviorofAluminum, Silicon Carbide, and GraphiteHybrid Composite with and without Cryogenic Treatment
- 1 May 2012
- Published by Science Alert in Journal of Applied Sciences
- Vol. 12 (10) , 1006-1012
Effect of Ribs and Stringer Spacings on the Weight of Aircraft Structure for Aluminum Material
- 1 May 2012
- Published by Science Alert in Journal of Applied Sciences
- Vol. 12 (10) , 1006-1012
Effect of Ribs and Stringer Spacings on the Weight of Aircraft Structure for Aluminum Material