Majid Faissal Jassim
Research Subjects
Majid Faissal Jassim has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Hawraa S. Malik
College of Engineering, University of Al-Qadisiyah, Diwaniyah 58001, Iraq
1 shared publication - Yousif Jabbar Lafta
Department of Civil Engineering, Collage of Engineering, University of Basrah, Basrah, Iraq
1 shared publication
Latest Publications
- Open Access
- 7 July 2023
- Published by Wiley in Journal of Engineering
- Vol. 2023, 1-9
Shear Behavior of Reinforced Concrete Beams with Different Arrangements of Externally Bonded Carbon Fiber-Reinforced Polymer
Carbonfiber-reinforced polymer (CFRP) composites are frequently utilized in the repair and reinforcement of reinforced concrete members because they are more corrosion-resistant, durable, and flexible than commonly used materials like steel plates. Many studies have demonstrated that the use of CFRP as an internal strengthening material has a substantial impact on the shear capacity of RC beams. This research looks into the possibility of using FRP material as an externally bonded reinforcement to increase the shear strength of RC beams. Because shear improvement and mode of failure are based on the right configuration of the CFRP sheets, the experimental work consisted of eight RC beams with various types, orientations, and configurations of CFRP sheets. All beams were examined under two-point bending. The test results show that the CFRP sheet significantly improved the beam’s shear strength and ductility and that it is advantageous to orient the FRP at 45 degrees to the beam’s longitudinal axis.
- 7 July 2023
- Published by Wiley in Journal of Engineering
- Vol. 2023, 1-9
Open AccessShear Behavior of Reinforced Concrete Beams with Different Arrangements of Externally Bonded Carbon Fiber-Reinforced Polymer
Carbonfiber-reinforced polymer (CFRP) composites are frequently utilized in the repair and reinforcement of reinforced concrete members because they are more corrosion-resistant, durable, and flexible than commonly used materials like steel plates. Many studies have demonstrated that the use of CFRP as an internal strengthening material has a substantial impact on the shear capacity of RC beams. This research looks into the possibility of using FRP material as an externally bonded reinforcement to increase the shear strength of RC beams. Because shear improvement and mode of failure are based on the right configuration of the CFRP sheets, the experimental work consisted of eight RC beams with various types, orientations, and configurations of CFRP sheets. All beams were examined under two-point bending. The test results show that the CFRP sheet significantly improved the beam’s shear strength and ductility and that it is advantageous to orient the FRP at 45 degrees to the beam’s longitudinal axis.