Camelia Madear
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Camelia Madear has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Gelu Madear
ECO-ROCCA Engineering SRL , Petrosani , Romania
8 shared publications - Sorin Mihai Radu
University of Petroșani , Petroșani , Romania
2 shared publications - André Monteiro Klen
Federal Institute of Education , Science and Technology of Minas Gerais , Ouro Preto , Brazil
1 shared publication - Ciprian-Gheorghe Danciu
University of Petroșani , Petroșani , Romania
1 shared publication - Laurentiu Asimopolos
Geological Institute of Romania, 012271 Bucharest, Romania
1 shared publication - Mihaela Toderaș
Mining Engineering, Surveying and Civil Engineering Department, Faculty of Mines, University of Petrosani, 332006 Petrosani, Romania
1 shared publication
Latest Publications
- Open Access
- 1 September 2026
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 32 (3) , 265-273
Discrete Fracture Networks and Environmental Performance in Ornamental Rock Quarries
This contribution investigates the role of fracture networks in controlling both operational efficiency and environmental performance in ornamental rock quarries. The study integrates structural geology, rock mechanics, and environmental assessment within a digital workflow based on high-resolution terrain models derived from aerial and terrestrial point cloud surveys. Multisource 3D datasets are processed to generate detailed Digital Elevation Models that capture the real geometry of quarry benches, highwalls, and extraction platforms. On this geometric framework, an automated procedure is applied to detect and characterise rock mass discontinuities directly on quarry surfaces. The resulting structural information allows the identification of dominant fracture sets, their orientations, spacings, and persistence, and their influence on block-size distribution and rock fabric. The derived fracture parameters are further used to support the construction of discrete fracture network models and to evaluate their implications for extraction strategies, quarry layout optimisation and slope stability. Beyond purely mechanical considerations, the study explores how rock mass structure influences key environmental indicators throughout the quarry life cycle. These include the generation of mining waste, recovery rates of marketable stone, industrial water consumption, energy demand, dust production and the associated carbon footprint per unit of product. Case studies from ornamental stone operations illustrate how integrating structural analysis with digital terrain modelling and environmental monitoring enables the definition of quarry-specific performance metrics. The results demonstrate that fracture-controlled quarry planning can significantly improve resource efficiency, reduce environmental impacts and support more sustainable closure and rehabilitation strategies [1], [2], [3].
- 1 September 2026
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 32 (3) , 265-273
Open AccessDiscrete Fracture Networks and Environmental Performance in Ornamental Rock Quarries
This contribution investigates the role of fracture networks in controlling both operational efficiency and environmental performance in ornamental rock quarries. The study integrates structural geology, rock mechanics, and environmental assessment within a digital workflow based on high-resolution terrain models derived from aerial and terrestrial point cloud surveys. Multisource 3D datasets are processed to generate detailed Digital Elevation Models that capture the real geometry of quarry benches, highwalls, and extraction platforms. On this geometric framework, an automated procedure is applied to detect and characterise rock mass discontinuities directly on quarry surfaces. The resulting structural information allows the identification of dominant fracture sets, their orientations, spacings, and persistence, and their influence on block-size distribution and rock fabric. The derived fracture parameters are further used to support the construction of discrete fracture network models and to evaluate their implications for extraction strategies, quarry layout optimisation and slope stability. Beyond purely mechanical considerations, the study explores how rock mass structure influences key environmental indicators throughout the quarry life cycle. These include the generation of mining waste, recovery rates of marketable stone, industrial water consumption, energy demand, dust production and the associated carbon footprint per unit of product. Case studies from ornamental stone operations illustrate how integrating structural analysis with digital terrain modelling and environmental monitoring enables the definition of quarry-specific performance metrics. The results demonstrate that fracture-controlled quarry planning can significantly improve resource efficiency, reduce environmental impacts and support more sustainable closure and rehabilitation strategies [1], [2], [3].
- Open Access
- 1 September 2026
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 32 (3) , 274-282
Structural Characterisation of Fracture Systems in Romanian Dimesnsion Stone Deposits: Insights from Scanline Analysis
This paper presents a field-calibrated synthetic scanline analysis of the Ruschița white-marble quarry (Caraș-Severin County, Romania), exploited at the white-marble level of the Poiana Rusca massif. Three horizontal scanlines (SL1 trend 87°, SL2 167°, SL3 267°) were positioned on the East, North and West facing Main Wall, and 58 discontinuities were sampled and assigned to two joint sets identified by DIPS 8.022: Set 1 - sub-horizontal foliation/bedding (mean plane 351°/8°, pole 171°/82°, n = 29) and Set 2 - steep SW-dipping conjugate (203°/57°, pole 23°/33°, n = 29). For each (set, scanline) pair, we compute the angular-correction matrix cos δ, total spacing Xs, normal spacing Xn = Xs · cos δ and linear discontinuity intensity P10. Mean trace length is estimated by four standard estimators (Priest-Hudson 1981, weighted, curtailed with c = 3 m, Laslett). Termination indices are reported above, below and combined. The results yield an engineering-reference mean trace length of ≈4.4 m for Set 1 and ≈4.6 m for Set 2 (curtailed estimator), normal spacing of 0.18 m (Set 1, SL2) and 0.56–1.12 m (Set 2), and 24 - 33 % termination in intact rock, together indicating a moderately persistent, well-connected joint network controlling in-situ block size. A reproducible Python port of the Octave workflow is provided. The output is conditioned for direct use as input to a Discrete Fracture Network (DFN) generator within the AI-COSTSQO platform, enabling a priori block-size prediction and environmental-impact reduction at marble quarries.
- 1 September 2026
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 32 (3) , 274-282
Open AccessStructural Characterisation of Fracture Systems in Romanian Dimesnsion Stone Deposits: Insights from Scanline Analysis
This paper presents a field-calibrated synthetic scanline analysis of the Ruschița white-marble quarry (Caraș-Severin County, Romania), exploited at the white-marble level of the Poiana Rusca massif. Three horizontal scanlines (SL1 trend 87°, SL2 167°, SL3 267°) were positioned on the East, North and West facing Main Wall, and 58 discontinuities were sampled and assigned to two joint sets identified by DIPS 8.022: Set 1 - sub-horizontal foliation/bedding (mean plane 351°/8°, pole 171°/82°, n = 29) and Set 2 - steep SW-dipping conjugate (203°/57°, pole 23°/33°, n = 29). For each (set, scanline) pair, we compute the angular-correction matrix cos δ, total spacing Xs, normal spacing Xn = Xs · cos δ and linear discontinuity intensity P10. Mean trace length is estimated by four standard estimators (Priest-Hudson 1981, weighted, curtailed with c = 3 m, Laslett). Termination indices are reported above, below and combined. The results yield an engineering-reference mean trace length of ≈4.4 m for Set 1 and ≈4.6 m for Set 2 (curtailed estimator), normal spacing of 0.18 m (Set 1, SL2) and 0.56–1.12 m (Set 2), and 24 - 33 % termination in intact rock, together indicating a moderately persistent, well-connected joint network controlling in-situ block size. A reproducible Python port of the Octave workflow is provided. The output is conditioned for direct use as input to a Discrete Fracture Network (DFN) generator within the AI-COSTSQO platform, enabling a priori block-size prediction and environmental-impact reduction at marble quarries.
- Open Access
- 1 September 2026
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 32 (3) , 283-292
Geotechnical Evaluation of Quarry-to-Lake Conversion Using Numerical Modelling
The conversion of exhausted sand and gravel quarries into artificial lakes represents an increasingly adopted post-mining land-use strategy, particularly in alluvial environments where excavations intersect shallow groundwater systems. However, the long-term stability of quarry slopes under changing hydrogeological conditions remains a critical geotechnical challenge. This study presents a numerical investigation of slope stability for the planned quarry-to-lake conversion of the Simeria Veche-2 perimeter (Hunedoara County, Romania), located within the Strei River floodplain. The site is characterised by thick gravel–sand alluvial deposits overlying compact marly clay, with excavation extending below the natural groundwater table. Slope stability analyses were performed using both limit-equilibrium (SLIDE2) and finite-element (RS2) modelling approaches under multiple hydrogeological scenarios, including dry conditions, a natural groundwater regime, partial filling, and full-lake development, using a drained analysis. The results indicate that groundwater conditions represent the dominant controlling factor affecting long-term slope stability. While the proposed 45° slopes remain stable under dry conditions, safety margins decrease significantly when pore-water pressure is considered. The study highlights the importance of integrating hydrogeological processes into post-mining geotechnical design and proposes practical measures, including slope optimisation, staged filling strategies and groundwater monitoring. The proposed methodology provides a useful framework for the safe rehabilitation and long-term management of quarry lakes developed in highly permeable alluvial deposits [1], [2], [3].
- 1 September 2026
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 32 (3) , 283-292
Open AccessGeotechnical Evaluation of Quarry-to-Lake Conversion Using Numerical Modelling
The conversion of exhausted sand and gravel quarries into artificial lakes represents an increasingly adopted post-mining land-use strategy, particularly in alluvial environments where excavations intersect shallow groundwater systems. However, the long-term stability of quarry slopes under changing hydrogeological conditions remains a critical geotechnical challenge. This study presents a numerical investigation of slope stability for the planned quarry-to-lake conversion of the Simeria Veche-2 perimeter (Hunedoara County, Romania), located within the Strei River floodplain. The site is characterised by thick gravel–sand alluvial deposits overlying compact marly clay, with excavation extending below the natural groundwater table. Slope stability analyses were performed using both limit-equilibrium (SLIDE2) and finite-element (RS2) modelling approaches under multiple hydrogeological scenarios, including dry conditions, a natural groundwater regime, partial filling, and full-lake development, using a drained analysis. The results indicate that groundwater conditions represent the dominant controlling factor affecting long-term slope stability. While the proposed 45° slopes remain stable under dry conditions, safety margins decrease significantly when pore-water pressure is considered. The study highlights the importance of integrating hydrogeological processes into post-mining geotechnical design and proposes practical measures, including slope optimisation, staged filling strategies and groundwater monitoring. The proposed methodology provides a useful framework for the safe rehabilitation and long-term management of quarry lakes developed in highly permeable alluvial deposits [1], [2], [3].
- Open Access
- 1 September 2025
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 31 (3) , 72-81
Combined Methods for Dimension Stone Deposits’ Joints and Fractures Detection, Digitalisation and Visualisation
Characterising joint and fracture systems is crucial for dimension stone deposit evaluation and optimisation. This paper reviews and analyses combined methodologies for detecting, digitalising, and visualising joints and fractures in dimension stone deposits. Integrating traditional field measurements with modern technologies like terrestrial laser scanning, photogrammetry, and specialised software enables comprehensive fracture system analysis. These combined methods provide advantages, including large dataset collection, access to inaccessible areas, and detailed 3D visualisation capabilities. The study examines how these techniques contribute to accurate block size estimation, quarry planning, and waste reduction. Special attention is given to computer-aided modelling systems that evaluate fracture orientation and density to determine potential block volumes and shapes. The research demonstrates that integrated approaches offer superior results for sustainable quarry management and economic viability assessment.
- 1 September 2025
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 31 (3) , 72-81
Open AccessCombined Methods for Dimension Stone Deposits’ Joints and Fractures Detection, Digitalisation and Visualisation
Characterising joint and fracture systems is crucial for dimension stone deposit evaluation and optimisation. This paper reviews and analyses combined methodologies for detecting, digitalising, and visualising joints and fractures in dimension stone deposits. Integrating traditional field measurements with modern technologies like terrestrial laser scanning, photogrammetry, and specialised software enables comprehensive fracture system analysis. These combined methods provide advantages, including large dataset collection, access to inaccessible areas, and detailed 3D visualisation capabilities. The study examines how these techniques contribute to accurate block size estimation, quarry planning, and waste reduction. Special attention is given to computer-aided modelling systems that evaluate fracture orientation and density to determine potential block volumes and shapes. The research demonstrates that integrated approaches offer superior results for sustainable quarry management and economic viability assessment.
- Open Access
- 1 June 2025
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 31 (2) , 66-74
Assessing Vegetation and Soil Conditions in the Ruschita Marble Quarry Using Drone-Based Multispectral Remote Sensing
This study proposes using drone-based multispectral remote sensing technology to assess vegetation health and soil conditions in the Ruschita Marble Quarry. The research aims to evaluate land degradation, soil erosion patterns, and vegetation coverage in the quarry area through multispectral imaging and post-processing in Agrowing Multispectral Software. The methodology involves deploying drones equipped with multispectral sensors to capture data across multiple spectral bands, enabling detailed analysis of vegetation health indices, soil surface characteristics, and erosion patterns. Vegetation Indices (VI) are derived directly from multispectral imagery, while high-resolution terrain mapping is performed to identify topographical features influencing erosion and vegetation recovery. This approach provides valuable insights for quarry restoration management by showcasing the potential of advanced remote sensing technologies in environmental monitoring, contributing to the development of sustainable quarry management practices and helping identify areas requiring intervention.
- 1 June 2025
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 31 (2) , 66-74
Open AccessAssessing Vegetation and Soil Conditions in the Ruschita Marble Quarry Using Drone-Based Multispectral Remote Sensing
This study proposes using drone-based multispectral remote sensing technology to assess vegetation health and soil conditions in the Ruschita Marble Quarry. The research aims to evaluate land degradation, soil erosion patterns, and vegetation coverage in the quarry area through multispectral imaging and post-processing in Agrowing Multispectral Software. The methodology involves deploying drones equipped with multispectral sensors to capture data across multiple spectral bands, enabling detailed analysis of vegetation health indices, soil surface characteristics, and erosion patterns. Vegetation Indices (VI) are derived directly from multispectral imagery, while high-resolution terrain mapping is performed to identify topographical features influencing erosion and vegetation recovery. This approach provides valuable insights for quarry restoration management by showcasing the potential of advanced remote sensing technologies in environmental monitoring, contributing to the development of sustainable quarry management practices and helping identify areas requiring intervention.
- Open Access
- 1 June 2025
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 31 (2) , 84-91
Minimisation of Waste, Water and Energy Consumption at Extraction of Dimension Stone to Support Eco-Label Certification
Dimension stone quarrying faces significant environmental challenges related to waste production, water usage, and energy consumption. The extraction process typically yields recovery rates between 3% and 60%, resulting in substantial waste material. Modern optimisation techniques and technologies, particularly diamond wire cutting, have revolutionised extraction efficiency while reducing environmental impact [1]. The EU Eco-label criteria now mandate specific material efficiency thresholds for natural stone extraction, emphasising the importance of sustainable quarrying practices. This paper examines strategies for minimising environmental impact in dimension stone quarrying through advanced algorithms that optimise cutting patterns, reduce waste production, and decrease resource consumption. This paper explores how these optimisation methods align with Eco-Label standards while maintaining economic viability. Special attention is given to the relationship between cutting surfaces and operational efficiency, as these directly influence energy, water, and tool consumption rates.
- 1 June 2025
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 31 (2) , 84-91
Open AccessMinimisation of Waste, Water and Energy Consumption at Extraction of Dimension Stone to Support Eco-Label Certification
Dimension stone quarrying faces significant environmental challenges related to waste production, water usage, and energy consumption. The extraction process typically yields recovery rates between 3% and 60%, resulting in substantial waste material. Modern optimisation techniques and technologies, particularly diamond wire cutting, have revolutionised extraction efficiency while reducing environmental impact [1]. The EU Eco-label criteria now mandate specific material efficiency thresholds for natural stone extraction, emphasising the importance of sustainable quarrying practices. This paper examines strategies for minimising environmental impact in dimension stone quarrying through advanced algorithms that optimise cutting patterns, reduce waste production, and decrease resource consumption. This paper explores how these optimisation methods align with Eco-Label standards while maintaining economic viability. Special attention is given to the relationship between cutting surfaces and operational efficiency, as these directly influence energy, water, and tool consumption rates.
- Open Access
- 1 June 2023
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 29 (2) , 75-81
Rockmass Fracture Analysis at Cărpiniş Travertine Quarry Using Ground Penetrating Radar and Geophysical Methods
Travertines are susceptible to fracturing/ cracking, making it difficult to extract large uncracked blocks of significant commercial value. In our study, we used the GPR – Ground Penetrating Radar and other geophysical methods (resistivity and seismic methods) to evaluate the degree of fracturing. Following the interpretation of the longitudinal and transversal GPR profiles, corroborated with the resistivities minima, led us to identify fractures and highly fracturing areas in the Carpinis quarry. In addition, using these combined methodologies and corroborating geophysical, geological, tectonic and geomorphological information creates the premises for an effective investigation of Carpinis quarry, which assists with optimising the mining process.
- 1 June 2023
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 29 (2) , 75-81
Open AccessRockmass Fracture Analysis at Cărpiniş Travertine Quarry Using Ground Penetrating Radar and Geophysical Methods
Travertines are susceptible to fracturing/ cracking, making it difficult to extract large uncracked blocks of significant commercial value. In our study, we used the GPR – Ground Penetrating Radar and other geophysical methods (resistivity and seismic methods) to evaluate the degree of fracturing. Following the interpretation of the longitudinal and transversal GPR profiles, corroborated with the resistivities minima, led us to identify fractures and highly fracturing areas in the Carpinis quarry. In addition, using these combined methodologies and corroborating geophysical, geological, tectonic and geomorphological information creates the premises for an effective investigation of Carpinis quarry, which assists with optimising the mining process.
- Open Access
- 1 June 2023
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 29 (2) , 30-41
Discontinuity Analysis at Ruschita Marble Quarry Using Televiewer and Scanline Techniques
Sciendo provides publishing services and solutions to academic and professional organizations and individual authors. We publish journals, books, conference proceedings and a variety of other publications.
- 1 June 2023
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 29 (2) , 30-41
Open AccessDiscontinuity Analysis at Ruschita Marble Quarry Using Televiewer and Scanline Techniques
Sciendo provides publishing services and solutions to academic and professional organizations and individual authors. We publish journals, books, conference proceedings and a variety of other publications.