Patricia Rodrigues Falcão
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Patricia Rodrigues Falcão has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Magnos Baroni
Universidade Federal de Santa Maria
10 shared publications - Angelo Dotto Ragagnin Prior
Graduate Program in Civil Engineering, Universidade Federal de Santa Maria, Santa Maria-RS, Brazil
4 shared publications - Luigi Tavares Gomes4 shared publications
- Paula Taiane Pascoal
Universidade Federal de Santa Maria
4 shared publications - Gustavo Corbellini Masutti
University of Cruz Alta
3 shared publications - Jose Leonardo dos Santos
Department of Transportation, Universidade Federal de Santa Maria, Santa Maria-RS, Brazil
3 shared publications
Latest Publications
- Open Access
- 19 August 2026
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 44 (7) , 345
Sustainable Stabilization of Lateritic Soils Using Industrial Residue Grits: Mechanical and Microstructural Insights
This study investigates the potential use of industrial grits waste, both alone and in combination with Portland cement, as a sustainable stabilizing agent for lateritic soils. Grits, a by-product of the pulp and paper industry with a high calcium oxide content, was characterized using laser granulometry and thermogravimetric analysis. The soil and mixtures were subjected to physical characterization and mechanical performance tests, including compaction, unconfined compressive strength, and consolidated undrained triaxial tests. Additionally, pH measurements, X-ray diffraction, and scanning electron microscopy analyses were conducted to assess the physicochemical mechanisms of stabilization. The incorporation of grits, either alone or combined with cement, significantly improved the mechanical properties of the soil, promoting increases in compressive and shear strength, porosity reduction, aggregate formation, and microstructural densification. Mixtures with 5% and 10% grits showed the best performance, while higher content resulted in reduced reactive efficiency due to the excess of inert particles. Stress–strain behavior generally exhibited a brittle failure pattern, characteristic of stabilized soils. The effective cohesive intercept increased by approximately 250% in mixtures containing 5% and 10% grits and by 46% in the mixture with 15% grits, compared to the soil alone, indicating the formation of a cohesive matrix. The use of grits proved to be a viable and environmentally advantageous technique, representing a sustainable alternative for the stabilization of lateritic soils, contributing to the valorization of industrial residues and to the reduction of CO 2 emission potential in geotechnical stabilization works.
- 19 August 2026
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 44 (7) , 345
Open AccessSustainable Stabilization of Lateritic Soils Using Industrial Residue Grits: Mechanical and Microstructural Insights
This study investigates the potential use of industrial grits waste, both alone and in combination with Portland cement, as a sustainable stabilizing agent for lateritic soils. Grits, a by-product of the pulp and paper industry with a high calcium oxide content, was characterized using laser granulometry and thermogravimetric analysis. The soil and mixtures were subjected to physical characterization and mechanical performance tests, including compaction, unconfined compressive strength, and consolidated undrained triaxial tests. Additionally, pH measurements, X-ray diffraction, and scanning electron microscopy analyses were conducted to assess the physicochemical mechanisms of stabilization. The incorporation of grits, either alone or combined with cement, significantly improved the mechanical properties of the soil, promoting increases in compressive and shear strength, porosity reduction, aggregate formation, and microstructural densification. Mixtures with 5% and 10% grits showed the best performance, while higher content resulted in reduced reactive efficiency due to the excess of inert particles. Stress–strain behavior generally exhibited a brittle failure pattern, characteristic of stabilized soils. The effective cohesive intercept increased by approximately 250% in mixtures containing 5% and 10% grits and by 46% in the mixture with 15% grits, compared to the soil alone, indicating the formation of a cohesive matrix. The use of grits proved to be a viable and environmentally advantageous technique, representing a sustainable alternative for the stabilization of lateritic soils, contributing to the valorization of industrial residues and to the reduction of CO 2 emission potential in geotechnical stabilization works.
- Open Access
- 11 June 2026
- Published by Springer Nature in Indian Geotechnical Journal
Hydro-Mechanical Transition and Collapse Behaviour of a Natural Lateritic Soil Under Wetting and Shear
This study investigates the wetting-induced collapse behaviour of a natural lateritic soil from southern Brazil, emphasizing the coupled hydraulic and mechanical effects that govern its instability. A comprehensive experimental program was conducted, combining one-dimensional consolidation, direct shear, and direct simple shear tests on undisturbed specimens, complemented by soil-water retention and microstructural analyses. The soil exhibits a pronounced dual-porosity structure that controls both suction retention and mechanical response. Upon wetting, an abrupt loss of strength and stiffness occurs due to the breakdown of interparticle bonding and suction, followed by structural reorganization and partial recovery of strength. Collapse deformation measured during shearing closely matches that obtained from conventional consolidation tests, confirming that collapse evolves concurrently with shear strain. Microscopic observations revealed structure breakdown and the formation of a denser and more aligned fabric after flooding under shear. The integrated approach adopted in this research enables a direct evaluation of hydro-mechanical transitions from suction-controlled to friction-dominated behaviour under realistic stress paths. The findings highlight the need to incorporate shear-path effects into the experimental assessment and design of foundations and earth structures on collapsible lateritic soils, contributing to a better understanding of wetting-induced instability in tropical environments.
- 11 June 2026
- Published by Springer Nature in Indian Geotechnical Journal
Open AccessHydro-Mechanical Transition and Collapse Behaviour of a Natural Lateritic Soil Under Wetting and Shear
This study investigates the wetting-induced collapse behaviour of a natural lateritic soil from southern Brazil, emphasizing the coupled hydraulic and mechanical effects that govern its instability. A comprehensive experimental program was conducted, combining one-dimensional consolidation, direct shear, and direct simple shear tests on undisturbed specimens, complemented by soil-water retention and microstructural analyses. The soil exhibits a pronounced dual-porosity structure that controls both suction retention and mechanical response. Upon wetting, an abrupt loss of strength and stiffness occurs due to the breakdown of interparticle bonding and suction, followed by structural reorganization and partial recovery of strength. Collapse deformation measured during shearing closely matches that obtained from conventional consolidation tests, confirming that collapse evolves concurrently with shear strain. Microscopic observations revealed structure breakdown and the formation of a denser and more aligned fabric after flooding under shear. The integrated approach adopted in this research enables a direct evaluation of hydro-mechanical transitions from suction-controlled to friction-dominated behaviour under realistic stress paths. The findings highlight the need to incorporate shear-path effects into the experimental assessment and design of foundations and earth structures on collapsible lateritic soils, contributing to a better understanding of wetting-induced instability in tropical environments.
- Open Access
- 4 May 2026
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 44 (4)
Multi-scale Assessment of Wetting-Induced Collapse in a Lateritic Soil: From Microstructure to Foundation Performance
Collapsible soils are a significant concern in geotechnical engineering due to their tendency to undergo volumetric collapse and strength loss upon wetting, which can compromise the performance of foundations and earth structures. Lateritic soils, common in tropical regions, are susceptible to collapse due to their open structure and cementation by sesquioxides. This study evaluates the effects of flooding on the mechanical behavior of a lateritic soil from southern Brazil through an integrated experimental program. The soil exhibited an initial degree of saturation of 63.39%, and the measured matric suction ranged from approximately 3.3 kPa to 30 MPa. Collapse potential measured in oedometer tests increased from 7.1% at 100 kPa to nearly 19% at 1600 kPa. Direct simple shear tests revealed a reduction of up to 74% in apparent cohesion under flooding, with minor changes in friction angle. Physical-model plate load tests showed reductions greater than 60% in ultimate bearing capacity after 48 h of inundation, associated with an estimated 20 kPa decrease in matric suction. Scanning electron microscopy confirmed the breakdown of aggregate bonds and a reduction in microporosity after saturation. The results provide multi-scale evidence that the collapse behavior of lateritic soils is strongly governed by suction-controlled mechanisms, highlighting the critical influence of matric suction on strength and foundation performance.
- 4 May 2026
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 44 (4)
Open AccessMulti-scale Assessment of Wetting-Induced Collapse in a Lateritic Soil: From Microstructure to Foundation Performance
Collapsible soils are a significant concern in geotechnical engineering due to their tendency to undergo volumetric collapse and strength loss upon wetting, which can compromise the performance of foundations and earth structures. Lateritic soils, common in tropical regions, are susceptible to collapse due to their open structure and cementation by sesquioxides. This study evaluates the effects of flooding on the mechanical behavior of a lateritic soil from southern Brazil through an integrated experimental program. The soil exhibited an initial degree of saturation of 63.39%, and the measured matric suction ranged from approximately 3.3 kPa to 30 MPa. Collapse potential measured in oedometer tests increased from 7.1% at 100 kPa to nearly 19% at 1600 kPa. Direct simple shear tests revealed a reduction of up to 74% in apparent cohesion under flooding, with minor changes in friction angle. Physical-model plate load tests showed reductions greater than 60% in ultimate bearing capacity after 48 h of inundation, associated with an estimated 20 kPa decrease in matric suction. Scanning electron microscopy confirmed the breakdown of aggregate bonds and a reduction in microporosity after saturation. The results provide multi-scale evidence that the collapse behavior of lateritic soils is strongly governed by suction-controlled mechanisms, highlighting the critical influence of matric suction on strength and foundation performance.
- 11 February 2026
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 49 (3)
Study on spatial variability of soils and load-bearing capacity of drilled shafts in lateritic ground
The natural variability of soil, influenced by weathering, human activity, and geological formation processes, is a critical factor in geotechnical engineering. This variability introduces significant uncertainty, particularly in the design of deep foundations, where the complex interaction between soil and structures, combined with varying geological conditions, complicates the prediction of structural behavior. However, focusing on deep foundations, this study examines soil property variability in southern Brazil. Standard penetration tests and slow static load tests were conducted to estimate pile load-bearing capacities. A reliability assessment method was employed to evaluate the accuracy of different prediction techniques, with results compared against load-settlement test data. Findings reveal significant discrepancies between prediction methods, with longer piles satisfying safety requirements, while shorter piles showed higher variability and did not meet the same safety standards. This research highlights the importance of incorporating soil variability and probabilistic analysis into foundation design to enhance reliability and safety.
- 11 February 2026
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 49 (3)
Study on spatial variability of soils and load-bearing capacity of drilled shafts in lateritic ground
The natural variability of soil, influenced by weathering, human activity, and geological formation processes, is a critical factor in geotechnical engineering. This variability introduces significant uncertainty, particularly in the design of deep foundations, where the complex interaction between soil and structures, combined with varying geological conditions, complicates the prediction of structural behavior. However, focusing on deep foundations, this study examines soil property variability in southern Brazil. Standard penetration tests and slow static load tests were conducted to estimate pile load-bearing capacities. A reliability assessment method was employed to evaluate the accuracy of different prediction techniques, with results compared against load-settlement test data. Findings reveal significant discrepancies between prediction methods, with longer piles satisfying safety requirements, while shorter piles showed higher variability and did not meet the same safety standards. This research highlights the importance of incorporating soil variability and probabilistic analysis into foundation design to enhance reliability and safety.
- Open Access
- 15 January 2026
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 49 (2)
A study on the deformability behavior of clayey lateritic soils through statistical and correlational analysis
This study investigated the mechanical behavior of tropical soils, specifically lateritic clays (LG’) compacted under intermediate energy, with a focus on the analysis on resilient modulus (RM) and permanent deformation (PD). A database was compiled including 20 Brazilian soils, comprising physical properties (maximum dry density, optimum moisture content, particle size distribution, and MCT classification indices) and mechanical properties data from repeated load triaxial tests. RM and PD regression parameters were evaluated for different stress states, adhering to Brazilian regulations. RM results showed high variability (mean: 351 MPa; CV: 42%), demonstrating a strong influence of deviatoric stress, which significantly reduced the elastic response with increasing stress levels. PD followed a log-normal distribution (mean: 0.635%; CV: 141%), with greater deformation correlating to elevated stress states. Pearson’s correlation revealed associations between RM and physical properties: positive with sand content and negative with clay content and optimum moisture content. Kruskal–Wallis tests confirmed RM’s significant dependence on geotechnical variables, whereas PD showed no statistically significant with these factors. These findings underscore the importance of integrated physical–mechanical characterization for predicting the structural performance of LG’ soils. Furthermore, they highlight PD’s high variability and the necessity for global analyses to achieve more representative estimates in mechanistic–empirical pavement design.
- 15 January 2026
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 49 (2)
Open AccessA study on the deformability behavior of clayey lateritic soils through statistical and correlational analysis
This study investigated the mechanical behavior of tropical soils, specifically lateritic clays (LG’) compacted under intermediate energy, with a focus on the analysis on resilient modulus (RM) and permanent deformation (PD). A database was compiled including 20 Brazilian soils, comprising physical properties (maximum dry density, optimum moisture content, particle size distribution, and MCT classification indices) and mechanical properties data from repeated load triaxial tests. RM and PD regression parameters were evaluated for different stress states, adhering to Brazilian regulations. RM results showed high variability (mean: 351 MPa; CV: 42%), demonstrating a strong influence of deviatoric stress, which significantly reduced the elastic response with increasing stress levels. PD followed a log-normal distribution (mean: 0.635%; CV: 141%), with greater deformation correlating to elevated stress states. Pearson’s correlation revealed associations between RM and physical properties: positive with sand content and negative with clay content and optimum moisture content. Kruskal–Wallis tests confirmed RM’s significant dependence on geotechnical variables, whereas PD showed no statistically significant with these factors. These findings underscore the importance of integrated physical–mechanical characterization for predicting the structural performance of LG’ soils. Furthermore, they highlight PD’s high variability and the necessity for global analyses to achieve more representative estimates in mechanistic–empirical pavement design.
- 16 October 2025
- Published by Elsevier in Transportation Geotechnics
- Vol. 56
Resilient modulus estimation in tropical subgrade soils: a statistical approach and machine learning
- 16 October 2025
- Published by Elsevier in Transportation Geotechnics
- Vol. 56
Resilient modulus estimation in tropical subgrade soils: a statistical approach and machine learning
- Open Access
- 1 July 2024
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 21 (7) , e6197
Diferentes metodologias de compactação em dois solos do Rio Grande do Sul, Brasil: análise no impacto de parâmetros
A compactação tem notória importância em obras de pavimentação viária, tal fato está vinculado a capacidade de garantir a estabilidade e durabilidade das suas camadas. Existem diferentes métodos de compactação com variadas energias, sendo que estes visam a reestruturação das partículas de solo, aumentando a sua densidade e reduzindo o índice de vazios, ou seja, objetiva melhorar as propriedades geotécnicas do material. Entretanto há uma série fatores intervenientes que podem resultar na variabilidade dos resultados obtidos em um ensaio de compactação. O viés desse artigo refere-se à comparação dos dados obtidos através das curvas de compactação realizadas nas energias normal e intermediária, utilizando as metodologias preconizadas pela ABNT (2016), DNIT (2023a) e DNIT (2023b). Foram utilizados dois solos, sendo um proveniente do município de Cruz Alta e outro de São Lourenço do Sul, ambos no estado do Rio Grande do Sul, Brasil. Os resultados denotaram que a metodologia DNIT (2023a) apresentou os maiores valores para peso específico aparente seco máximo e os menores valores de umidade ótima quando comparados com as demais. Enquanto a umidade ótima apresentou-se maior na metodologia do DNIT (2023b) e da ABNT (2016). Assim, cada metodologia resultou em um valor de umidade ótima distinto, entretanto, em um projeto geotécnico a variabilidade da umidade assume um papel crucial, pois ela afeta a capacidade de suporte e a permeabilidade do material. Posto isto, reitera-se a importância do controle dessa variação em obras de infraestrutura viária visando garantir a segurança e a eficiência do pavimento.
- 1 July 2024
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 21 (7) , e6197
Open AccessDiferentes metodologias de compactação em dois solos do Rio Grande do Sul, Brasil: análise no impacto de parâmetros
A compactação tem notória importância em obras de pavimentação viária, tal fato está vinculado a capacidade de garantir a estabilidade e durabilidade das suas camadas. Existem diferentes métodos de compactação com variadas energias, sendo que estes visam a reestruturação das partículas de solo, aumentando a sua densidade e reduzindo o índice de vazios, ou seja, objetiva melhorar as propriedades geotécnicas do material. Entretanto há uma série fatores intervenientes que podem resultar na variabilidade dos resultados obtidos em um ensaio de compactação. O viés desse artigo refere-se à comparação dos dados obtidos através das curvas de compactação realizadas nas energias normal e intermediária, utilizando as metodologias preconizadas pela ABNT (2016), DNIT (2023a) e DNIT (2023b). Foram utilizados dois solos, sendo um proveniente do município de Cruz Alta e outro de São Lourenço do Sul, ambos no estado do Rio Grande do Sul, Brasil. Os resultados denotaram que a metodologia DNIT (2023a) apresentou os maiores valores para peso específico aparente seco máximo e os menores valores de umidade ótima quando comparados com as demais. Enquanto a umidade ótima apresentou-se maior na metodologia do DNIT (2023b) e da ABNT (2016). Assim, cada metodologia resultou em um valor de umidade ótima distinto, entretanto, em um projeto geotécnico a variabilidade da umidade assume um papel crucial, pois ela afeta a capacidade de suporte e a permeabilidade do material. Posto isto, reitera-se a importância do controle dessa variação em obras de infraestrutura viária visando garantir a segurança e a eficiência do pavimento.
- Open Access
- 1 July 2024
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 21 (7) , e6162
Plastic deformation analysis of lateritic clay soils using multi-stage and single-stage methodology
No presente artigo, verificou-se a deformação permanente de um solo argiloso de comportamento laterítico empregado em subleito, comparando resultados de diferentes metodologias. Por ser um material sujeito a grandes deformações quando submetido a elevadas tensões, a caracterização quanto a plasticidade é pertinente, justificando a necessidade de uma investigação de suas propriedades plásticas. No Brasil, essa avaliação segue um protocolo extenso, envolvendo diversas amostras e condições distintas de tensões. Entretanto, outros países já utilizam ensaios em multiestágios como forma de avaliar a deformação permanente. Diante do exposto, neste artigo é apresentado um comparativo do protocolo estágio único frente a dois protocolos multiestágios adaptado a duas diferentes condições de aplicações de ciclos de cargas, sendo a primeira delas realizadas para seis distintos pares de tensões variando as tensões confinante e desvio, e a segunda com a tensão confinante fixada e variando apenas a tensão de desvio. Pode-se concluir que as deformações permanentes acumuladas crescem à medida que as tensões aplicadas aumentam e que elas apresentam uma tendência ao acomodamento, resultado fortemente alinhado com o identificado pela metodologia dita tradicional. A utilização da metodologia multiestágios é promissora para uma caracterização prévia do material, possibilitando identificar tendência de comportamentos para diversos parâmetros com um menor tempo de ensaio e uma menor quantidade de material, podendo vir a ser utilizada como critério de escolha entre jazidas. Ainda, são necessários mais estudos de forma a validar o protocolo para um conjunto maior de materiais.
- 1 July 2024
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 21 (7) , e6162
Open AccessPlastic deformation analysis of lateritic clay soils using multi-stage and single-stage methodology
No presente artigo, verificou-se a deformação permanente de um solo argiloso de comportamento laterítico empregado em subleito, comparando resultados de diferentes metodologias. Por ser um material sujeito a grandes deformações quando submetido a elevadas tensões, a caracterização quanto a plasticidade é pertinente, justificando a necessidade de uma investigação de suas propriedades plásticas. No Brasil, essa avaliação segue um protocolo extenso, envolvendo diversas amostras e condições distintas de tensões. Entretanto, outros países já utilizam ensaios em multiestágios como forma de avaliar a deformação permanente. Diante do exposto, neste artigo é apresentado um comparativo do protocolo estágio único frente a dois protocolos multiestágios adaptado a duas diferentes condições de aplicações de ciclos de cargas, sendo a primeira delas realizadas para seis distintos pares de tensões variando as tensões confinante e desvio, e a segunda com a tensão confinante fixada e variando apenas a tensão de desvio. Pode-se concluir que as deformações permanentes acumuladas crescem à medida que as tensões aplicadas aumentam e que elas apresentam uma tendência ao acomodamento, resultado fortemente alinhado com o identificado pela metodologia dita tradicional. A utilização da metodologia multiestágios é promissora para uma caracterização prévia do material, possibilitando identificar tendência de comportamentos para diversos parâmetros com um menor tempo de ensaio e uma menor quantidade de material, podendo vir a ser utilizada como critério de escolha entre jazidas. Ainda, são necessários mais estudos de forma a validar o protocolo para um conjunto maior de materiais.
- 22 July 2023
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 41 (8) , 4761-4773
Assessment of the Impact of Inundation on the Strength of a Lateritic and Collapsible Soil
- 22 July 2023
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 41 (8) , 4761-4773
Assessment of the Impact of Inundation on the Strength of a Lateritic and Collapsible Soil
- Open Access
- 10 July 2023
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 46 (3)
Load capacity evaluation of different typologies of short and small diameter piles
- 10 July 2023
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 46 (3)
Open AccessLoad capacity evaluation of different typologies of short and small diameter piles