N. V. S. Shankar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
N. V. S. Shankar has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- K. Sandeep Kumar
SMME, IIT Mandi, Suran, Himachal Pradesh, India
3 shared publications - Vuppala Sesha Narasimha Venkata Ramana
Department of Mechanical Engineering, Gitam School of Technology, Gitam (Deemed to Be University), Visakhapatnam, India
3 shared publications - G. Abhinav
GITAM school of Technology, GITAM deemed to be university
2 shared publications H. Ravi Shankar
GITAM University
2 shared publications- Koona Bhavani
GITAM (Deemed to be university)
2 shared publications A. Gopi Chand
Swarnandhra College of Engineering and Technology
1 shared publication
Latest Publications
- 13 December 2025
- Published by World Scientific Pub Co Pte Ltd in Journal of Advanced Manufacturing Systems
- p. 1-12
Effect of Lattice Structure on Compression Strength Behavior of 3D Printed Stochastic PLA Material for Biomedical Applications
Porous structures play a crucial role in biomedical applications, particularly in the design of implants and scaffolds, as they allow for tissue integration, nutrient transport, and enhanced biocompatibility. Among the various materials used, polymeric materials have gained significant attention due to their tunable mechanical properties, biodegradability, and ability to be processed into complex geometries. Polylactic acid (PLA), a widely used biodegradable polymer, has become especially relevant with the advancement of 3D printing technologies such as fused deposition modeling (FDM). To study the behavior of polymeric lattice structures under compressive stress, the present work investigates PLA specimens fabricated through the FDM process. Using ASTM D695 test procedures, the mechanical properties of PLA cubes were analyzed. The findings demonstrate that the lattice geometry and printing parameters strongly influence the compressive performance. Among the tested configurations, the specimen with a Delaunay lattice structure exhibited the highest load-bearing capacity (17394.44 N), outperforming those with Voronoi and orthofoam structures. This study highlights the potential of optimized lattice architectures in enhancing the mechanical performance of polymer-based biomedical structures.
- 13 December 2025
- Published by World Scientific Pub Co Pte Ltd in Journal of Advanced Manufacturing Systems
- p. 1-12
Effect of Lattice Structure on Compression Strength Behavior of 3D Printed Stochastic PLA Material for Biomedical Applications
Porous structures play a crucial role in biomedical applications, particularly in the design of implants and scaffolds, as they allow for tissue integration, nutrient transport, and enhanced biocompatibility. Among the various materials used, polymeric materials have gained significant attention due to their tunable mechanical properties, biodegradability, and ability to be processed into complex geometries. Polylactic acid (PLA), a widely used biodegradable polymer, has become especially relevant with the advancement of 3D printing technologies such as fused deposition modeling (FDM). To study the behavior of polymeric lattice structures under compressive stress, the present work investigates PLA specimens fabricated through the FDM process. Using ASTM D695 test procedures, the mechanical properties of PLA cubes were analyzed. The findings demonstrate that the lattice geometry and printing parameters strongly influence the compressive performance. Among the tested configurations, the specimen with a Delaunay lattice structure exhibited the highest load-bearing capacity (17394.44 N), outperforming those with Voronoi and orthofoam structures. This study highlights the potential of optimized lattice architectures in enhancing the mechanical performance of polymer-based biomedical structures.
- 24 August 2025
- Published by Springer Nature
- p. 569-581
Effect of Lattice Structure on Surface Roughness and Thermal Conductivity of FDM Components
- 24 August 2025
- Published by Springer Nature
- p. 569-581
Effect of Lattice Structure on Surface Roughness and Thermal Conductivity of FDM Components
- 19 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Web Based Legal Text Summarizer
The legal industry is currently grappling with the issue of a growing backlog of unresolved cases. This paper aims to address the problem by proposing a web-based tool designed to generate extractive summaries from selected legal documents. These summaries can support decision-making within the judicial process. The primary goal of the tool is to reduce the time and effort legal professionals spend reviewing case files, thereby streamlining workflows. The key objective is to identify cases that can be resolved or settled more efficiently, allowing legal practitioners and courts to focus their attention on more complex matters. To achieve this, the tool must generate comprehensive summaries of key elements within the case documents. Three unsupervised and two supervised learning techniques for summarizing legal texts were investigated during the development process. Of these, the TextRank, an unsupervised learning algorithm, delivered optimal results. Consequently, this method was implemented in the tool to ensure effective and accurate summarization of lengthy legal documents. The system helps streamline the handling of pending case files and assists decision-makers in accelerating their work by summarizing important case details such as evidence and legal sections. It ensures no crucial statements are overlooked, which could be critical for the case. Additionally, a web application was developed to implement the TextRank method, automating the process. The generated summaries are stored in a database for future reference, providing a useful resource for ongoing and future legal matters.
- 19 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Web Based Legal Text Summarizer
The legal industry is currently grappling with the issue of a growing backlog of unresolved cases. This paper aims to address the problem by proposing a web-based tool designed to generate extractive summaries from selected legal documents. These summaries can support decision-making within the judicial process. The primary goal of the tool is to reduce the time and effort legal professionals spend reviewing case files, thereby streamlining workflows. The key objective is to identify cases that can be resolved or settled more efficiently, allowing legal practitioners and courts to focus their attention on more complex matters. To achieve this, the tool must generate comprehensive summaries of key elements within the case documents. Three unsupervised and two supervised learning techniques for summarizing legal texts were investigated during the development process. Of these, the TextRank, an unsupervised learning algorithm, delivered optimal results. Consequently, this method was implemented in the tool to ensure effective and accurate summarization of lengthy legal documents. The system helps streamline the handling of pending case files and assists decision-makers in accelerating their work by summarizing important case details such as evidence and legal sections. It ensures no crucial statements are overlooked, which could be critical for the case. Additionally, a web application was developed to implement the TextRank method, automating the process. The generated summaries are stored in a database for future reference, providing a useful resource for ongoing and future legal matters.
- 26 November 2024
- Published by World Scientific Pub Co Pte Ltd in Journal of Advanced Manufacturing Systems
- Vol. 24 (02) , 423-434
Analysis of Mechanical Properties of Components Produced by Additive Manufacturing
This paper analyses the effect of various lattice structures and lattice vectors on the mechanical properties of components made with acrylonitrile butadiene styrene (ABS) material by fused deposition modeling (FDM) technique. ABS is a well-known thermoplastic polymer that is being used in a variety of applications because of its high durability and good adaptability. A total of nine varieties of lattice structures are examined, including regular variations like hexagonal and cubic patterns and more complex ones like Gyroid patterns in this paper. Lattice vectors like 4–6 mm were considered while preparing the components. The densities of the specimens were estimated, and the specimens were tested for their flexural strength and compression strength. The results show that “Gyroid minimal surface” structures are a better choice for flexural and compression strength applications.
- 26 November 2024
- Published by World Scientific Pub Co Pte Ltd in Journal of Advanced Manufacturing Systems
- Vol. 24 (02) , 423-434
Analysis of Mechanical Properties of Components Produced by Additive Manufacturing
This paper analyses the effect of various lattice structures and lattice vectors on the mechanical properties of components made with acrylonitrile butadiene styrene (ABS) material by fused deposition modeling (FDM) technique. ABS is a well-known thermoplastic polymer that is being used in a variety of applications because of its high durability and good adaptability. A total of nine varieties of lattice structures are examined, including regular variations like hexagonal and cubic patterns and more complex ones like Gyroid patterns in this paper. Lattice vectors like 4–6 mm were considered while preparing the components. The densities of the specimens were estimated, and the specimens were tested for their flexural strength and compression strength. The results show that “Gyroid minimal surface” structures are a better choice for flexural and compression strength applications.
- 2 February 2020
- Published by Springer Nature
- p. 433-441
Low-Cost Test Rig for Demonstrating Single Plane Balancing Using Vibrations
- 2 February 2020
- Published by Springer Nature
- p. 433-441
Low-Cost Test Rig for Demonstrating Single Plane Balancing Using Vibrations
- 1 January 2020
- Published by Elsevier in Materials Today: Proceedings
- Vol. 24, 788-797
Process Parameter Optimization for Minimizing Vibrations and Surface Roughness During Turning EN19 Steel Using Coated Carbide Tool
- 1 January 2020
- Published by Elsevier in Materials Today: Proceedings
- Vol. 24, 788-797
Process Parameter Optimization for Minimizing Vibrations and Surface Roughness During Turning EN19 Steel Using Coated Carbide Tool
- 22 June 2018
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 1148, 103-108
Low Cost Vibration Measurement and Optimization during Turning Process
During machining any material, vibrations play a major role in deciding the life of the cutting tool as well as machine tool. The magnitude acceleration of vibrations is directly proportional to the cutting forces. In other words, if we are able to measure the acceleration experienced by the tool during machining, we can get a sense of force. There are many commercially available, pre-calibrated accelerometer sensors available off the shelf. In the current work, an attempt has been made to measure vibrations using ADXL335 accelerometer. This accelerometer is interfaced to computer using Arduino. The measured values are then used to optimize the machining process. Experiments are performed on Brass. During machining, it is better to have lower acceleration values. Thus, the first objective of the work is to minimize the vibrations. Surface roughness is another major factor which criterion “lower is the better” applies. In order to optimize the values, a series of experiments are conducted with three factors, namely, tool type (2 levels), Depth of cut (3 levels) and Feed are considered (3 levels). Mixed level optimization is performed using Taguchi analysis with L18 orthogonal array. Detailed discussion of the parameters shall be given in the article.
- 22 June 2018
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 1148, 103-108
Low Cost Vibration Measurement and Optimization during Turning Process
During machining any material, vibrations play a major role in deciding the life of the cutting tool as well as machine tool. The magnitude acceleration of vibrations is directly proportional to the cutting forces. In other words, if we are able to measure the acceleration experienced by the tool during machining, we can get a sense of force. There are many commercially available, pre-calibrated accelerometer sensors available off the shelf. In the current work, an attempt has been made to measure vibrations using ADXL335 accelerometer. This accelerometer is interfaced to computer using Arduino. The measured values are then used to optimize the machining process. Experiments are performed on Brass. During machining, it is better to have lower acceleration values. Thus, the first objective of the work is to minimize the vibrations. Surface roughness is another major factor which criterion “lower is the better” applies. In order to optimize the values, a series of experiments are conducted with three factors, namely, tool type (2 levels), Depth of cut (3 levels) and Feed are considered (3 levels). Mixed level optimization is performed using Taguchi analysis with L18 orthogonal array. Detailed discussion of the parameters shall be given in the article.
- 1 November 2007
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 221 (11) , 1651-1656
An approach to feature-based three-dimensional modelling and similarity assessment of turned components
Feature-based modelling has been considered an indispensable tool for integrating design and manufacturing processes. In contrast to the common approach of simply attaching manufacturing information to existing geometric models, the present work proposes a new approach to extracting machining features from a feature-based solid modelling, based on an integrated geometric modelling system that supports both feature-based modelling and feature recognition. As a result, feature information is directly available to downstream activities, and feature extraction or recognition is no longer needed. The proposed feature-based modelling system provides a graphical environment for solid modelling in AutoCAD. This paper presents algorithms for feature-based modelling. The feature types are used as a basis for similarity assessment.
- 1 November 2007
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 221 (11) , 1651-1656
An approach to feature-based three-dimensional modelling and similarity assessment of turned components
Feature-based modelling has been considered an indispensable tool for integrating design and manufacturing processes. In contrast to the common approach of simply attaching manufacturing information to existing geometric models, the present work proposes a new approach to extracting machining features from a feature-based solid modelling, based on an integrated geometric modelling system that supports both feature-based modelling and feature recognition. As a result, feature information is directly available to downstream activities, and feature extraction or recognition is no longer needed. The proposed feature-based modelling system provides a graphical environment for solid modelling in AutoCAD. This paper presents algorithms for feature-based modelling. The feature types are used as a basis for similarity assessment.