ZZZhenwei Zhang

Zhenwei Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhenwei Zhang has a total of 14 co-authors. Here are the top co-authors by number of shared publications:

  • Lili Lang

    State Key Laboratory of Materials for Integrated Circuits, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences , 865 Changning Road, Shanghai 200050

    6 shared publications
  • Yemin Dong

    State Key Laboratory of Materials for Integrated Circuits, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences

    6 shared publications
  • Wei Xiong

    State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China

    4 shared publications
  • Lin Sun

    National Key Laboratory of Materials for Integrated Circuits, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China

    3 shared publications
  • Wei Zhong

    National Key Laboratory of Materials for Integrated Circuits, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China

    2 shared publications
  • Yi Shan

    State Key Laboratory of Materials for Integrated Circuits, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China

    2 shared publications

Latest Publications

  • Open Access

    Modeling and Mitigating Output-Dependent Modulation in Current-Steering DAC Based on Differential-Quad Switching Scheme

    by Yingchao Sun, Zhenwei Zhang, Yi Shan, Lili Lang, Yemin Dong

    This brief presents a comprehensive analysis of the output-dependent modulation (ODM) in a current-steering digital-to-analog converter (CS-DAC) based on the differential-quad switching (DQS) structure. A mathematical model is proposed to accurately describe ODM, which is categorized into two types: output transition errors and boundary effect errors. A novel approach of adding isolation devices is introduced and reinterpreted to mitigate the effect of ODM. The simulation results indicate that the inclusion of isolation devices efficiently suppresses the odd harmonics at mid-to-high frequency by a value that is 13 dB lower than before. Experimental validation is conducted on a 16-bit 250 MS/s CS-DAC fabricated in a 180 nm process.


  • Open Access

    A 16 Bit 125 MS/s Pipelined Analog-to-Digital Converter with a Digital Foreground Calibration Based on Capacitor Reuse

    by Zhenwei Zhang, Yizhe Hu, Lili Lang, Yemin Dong

    A 16-bit 125 MS/s pipelined analog-to-digital converter (ADC) implemented in a 0.18 μm CMOS process is presented in this paper. A sample-and-hold amplifier-less (SHA-less) modified 2.5-bit front-end is adopted, which splits the sampling capacitor in half to eliminate the common-mode voltage buffer. The multiplying-digital-to-analog converter (MDAC) in the first pipeline stage is modified by reusing the sampling capacitor in a foreground digital calibration for improving the ADC linearity. This design can circumvent a dedicated reference buffer to generate the calibration voltages at all comparator thresholds. By calibrating the ADC in the digital domain, the integral non-linearity (INL) is improved from −9.2/10 LSB to −3/2.2 LSB, and the spurious-free dynamic range (SFDR) is optimized by over 8dB. The ADC consumes 154mW (reference buffer and clock included) from a 1.8 V supply.


  • Open Access

    An All-Digital Timing Mismatch Calibration Algorithm Based on Reference Channel for TIADC

    by Wei Zhong, Yemin Dong, Lili Lang, Wei Xiong, Lin Sun, Yu Liu, Haijing Liu, Zhenwei Zhang

    This paper proposes an all-digital calibration algorithm that utilizes a reference channel to suppress the timing mismatch in the Time-Interleaved Analog-to-Digital Converter (TIADC). The output of the reference channel is aligned with each sub-channel in turn, therefore enabling the simultaneous sampling and conversion of the same input signal. First, the statistical characteristics across the channels are employed for estimating the timing mismatch; then, by comparing the output difference between the reference channel and the sub-channels that are sampled simultaneously, the deviation of the derivator can be calibrated. Finally, combining both calibration results yields an accurate final output. This proposed algorithm provides an effective solution to improve TIADC performance in high-speed data acquisition systems. The proposed architecture is applied to a 12-bit 2.4 GS/s four-channel TIADC model, and then its effectiveness is verified. The simulation results exhibit that the Effective Number Of Bits (ENOB) at an input signal frequency of 984 MHz shows a remarkable improvement from 6.88 bits to 11.92 bits. The effectiveness of this technique is also demonstrated through the off-chip calibration of a commercial 12-bit four-channel 2 GS/s TIADC using a 680 MHz input signal that is based on the actual chip results.


  • An Adaptive and Universal Timing Mismatch Estimation Method for TIADCs

    by Lin Sun, Zhenwei Zhang, Lili Lang, Tong Kang, Wei Xiong, Yu Liu, Wei Zhong, Yemin Dong

    This brief proposes a fully digital background estimation technique for timing mismatch in time-interleaved analog-to-digital converters (TIADCs). The improved estimation technique is a feedback method based on statistics and Taylor series expansion. Besides, an exponential moving average (EMA) with adaptive coefficient is introduced to prevent performance degradation near specific frequencies, which improves the robustness of calibration. This estimation method can maintain high performance of accuracy and convergence speed across nearly the entire input frequency band. Furthermore, it is not restricted to the number of channels, amplitude, and frequency of the input signal. The effectiveness of this technique is demonstrated through off-chip calibration of a commercial 12-bit four-channel 3 GS/s TIADC using a 1.01 GHz input signal. Results indicate that the proposed method converges after approximately 3000 samples, reducing spurious signals stemming from timing mismatch by 20.6, 19.3, and 18.5 dB, respectively.


  • Open Access

    A Novel Fully Digital Feedforward Background Calibration Technique for Timing Mismatch in M-Channel Time-Interleaved ADCs

    by Wei Xiong, Zhenwei Zhang, Lili Lang, Yemin Dong

    This paper presents a novel digital background calibration technique for timing mismatches in time-interleaved analog-to-digital converters (TIADCs). We reconstruct and eliminate the timing mismatch based on the theory of timing-mismatch-induced spurious signals in the frequency domain. The proposed compensation algorithm utilizes the conjugate property between spurious signals to achieve low complexity. A coarse-fine correction architecture is adopted to eliminate higher-order time-skew errors. A novel feedforward estimation algorithm based on the correlation of adjacent channels is proposed to extract the time-skew errors. Our proposed calibration technique is suitable for an arbitrary number of channels. The simulation results demonstrate that the utilization of the proposed calibration technique yields significant improvements in both the signal-to-noise-and-distortion ratio (SNDR) and spurious-free dynamic range (SFDR). The SNDR and SFDR are improved from 55.82 dB and 56.64 dB to 79.92 dB and 105.98 dB, respectively.


  • Open Access

    A Digital Timing-Mismatch Calibration Technique for Time-Interleaved ADCs Based on a Coordinate Rotational Digital Computer Algorithm

    by Tong Kang, Zhenwei Zhang, Wei Xiong, Lin Sun, Yu Liu, Wei Zhong, Lili Lang, Yi Shan, Yemin Dong

    Timing-mismatch errors among channels in time-interleaved analog-to-digital converters (TIADCs) greatly degrade the whole performance of the system. Therefore, techniques for calibrating timing mismatch are indispensable, and a new fully-digital calibration technique is presented in this article. Based on a Hilbert filter, modified moving averagers (MMAs) and inverse cosine functions, the proposed estimation algorithm is fast (within 1200 sample points) and accurate. Meanwhile, the coordinate rotational digital computer (CORDIC) algorithm, which is used to implement inverse cosine functions, is also improved, giving it higher precision. In addition, a compensation method based on second-order Taylor series approximation with less hardware resource consumption is provided. Through analyses and simulations, this calibration technique proved to be suitable for TIADCs with an arbitrary number of channels, in which the signal-to-noise and distortion ratio (SNDR) and the spurious-free dynamic range (SFDR) were, respectively, improved from 24.06 dB and 24.57 dB to 67.96 dB and 85.69 dB.