Ying Lu
Research Subjects
Ying Lu has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Qiyang Lu
Westlake University
8 shared publications - Luhan Wei
Department of Materials Science and Engineering, School of Engineering
6 shared publications - Haowen Chen
Department of Materials Science and Engineering, School of Engineering
5 shared publications - Yang Hu
School of Engineering, Westlake University, Hangzhou, Zhejiang 310030, China
4 shared publications - Zihan Xu
School of Engineering
4 shared publications - Nian Zhang
Shanghai Synchrotron Radiation Facility Shanghai Advanced Research Institute Chinese Academy of Sciences Shanghai China
3 shared publications
Latest Publications
- 2 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (40) , 43401-43410
Aerobic Dehydrogenation by Coupled Electrochemical Reactions Governs Room-Temperature Proton Defect Chemistry in Functional Oxides
Tuning functional oxides by controlling ionic point defects is a well-established paradigm for designing tailored functionalities. At elevated temperatures, this is usually achieved by tuning ambient oxygen partial pressure (pO2) to regulate oxygen chemical potential and defect (e.g., protons and oxygen vacancies) concentrations. At room temperature, however, atmosphere-driven tuning is considered unfeasible due to sluggish surface kinetics and negligible ionic mobility. Here, using hydrogenated NdNiO3 as a model system, we show that ambient pO2 can in fact regulate hydrogen chemical potential and protonic defects through aerobic dehydrogenation driven by coupled anodic proton extraction and cathodic oxygen reduction in aqueous solutions. Using mixed-potential theory together with operando electrochemical, optical, and structural characterizations, we quantitatively analyze these coupled half-reactions and determine how pO2 modulates dehydrogenation kinetics. These insights deepen the understanding of room-temperature defect chemistry and provide guidance for designing functional oxide devices based on controlled modulation of ionic defects.
- 2 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (40) , 43401-43410
Aerobic Dehydrogenation by Coupled Electrochemical Reactions Governs Room-Temperature Proton Defect Chemistry in Functional Oxides
Tuning functional oxides by controlling ionic point defects is a well-established paradigm for designing tailored functionalities. At elevated temperatures, this is usually achieved by tuning ambient oxygen partial pressure (pO2) to regulate oxygen chemical potential and defect (e.g., protons and oxygen vacancies) concentrations. At room temperature, however, atmosphere-driven tuning is considered unfeasible due to sluggish surface kinetics and negligible ionic mobility. Here, using hydrogenated NdNiO3 as a model system, we show that ambient pO2 can in fact regulate hydrogen chemical potential and protonic defects through aerobic dehydrogenation driven by coupled anodic proton extraction and cathodic oxygen reduction in aqueous solutions. Using mixed-potential theory together with operando electrochemical, optical, and structural characterizations, we quantitatively analyze these coupled half-reactions and determine how pO2 modulates dehydrogenation kinetics. These insights deepen the understanding of room-temperature defect chemistry and provide guidance for designing functional oxide devices based on controlled modulation of ionic defects.
- 26 January 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (4) , 1578-1586
Quantifying Chemical Capacitance and Diffusion Coefficients in Hydrogenated La 0.6 Sr 0.4 FeO 3– δ via Operando Spectro-Electrochemical Characterizations
Hydrogenation in redox-active oxides is widely used to modulate electronic structure and, in turn, optical, magnetic, and transport properties in electrochromic, energy-storage, and ionotronic devices. Quantitatively resolving hydrogenation is therefore critical for rational device design. However, a general operando framework that directly quantifies potential-dependent proton concentration while decoupling ionic and electronic transport and linking both to defect thermodynamics remains limited. Herein, using La0.6Sr0.4FeO3-δ thin films as a model system, we develop an integrated methodology that combines operando spectro-electrochemistry, electrochemical impedance spectroscopy, and defect-chemistry analysis to interrogate hydrogenation across applied potentials. The operando spectro-electrochemical signal, calibrated by coulometric titration, maps absorbance changes to proton concentration, enabling direct determination of its potential dependence. Impedance spectroscopy separates ionic and electronic contributions, yielding potential-dependent chemical capacitance and ionic conductivity. Defect-chemistry analysis further supports the reliability of the observed potential-dependent trends. We believe this approach is readily transferable to other redox-active oxides.
- 26 January 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (4) , 1578-1586
Quantifying Chemical Capacitance and Diffusion Coefficients in Hydrogenated La 0.6 Sr 0.4 FeO 3– δ via Operando Spectro-Electrochemical Characterizations
Hydrogenation in redox-active oxides is widely used to modulate electronic structure and, in turn, optical, magnetic, and transport properties in electrochromic, energy-storage, and ionotronic devices. Quantitatively resolving hydrogenation is therefore critical for rational device design. However, a general operando framework that directly quantifies potential-dependent proton concentration while decoupling ionic and electronic transport and linking both to defect thermodynamics remains limited. Herein, using La0.6Sr0.4FeO3-δ thin films as a model system, we develop an integrated methodology that combines operando spectro-electrochemistry, electrochemical impedance spectroscopy, and defect-chemistry analysis to interrogate hydrogenation across applied potentials. The operando spectro-electrochemical signal, calibrated by coulometric titration, maps absorbance changes to proton concentration, enabling direct determination of its potential dependence. Impedance spectroscopy separates ionic and electronic contributions, yielding potential-dependent chemical capacitance and ionic conductivity. Defect-chemistry analysis further supports the reliability of the observed potential-dependent trends. We believe this approach is readily transferable to other redox-active oxides.
- 9 December 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (51) , 47091-47101
Metal–Support Interaction Tuned by Oxygen Chemical Potential Governs Coarsening of Metal Nanoparticles Exsolved from Perovskite Oxides
Metal exsolution from perovskite oxides is a promising strategy for fabricating durable catalysts of uniformly dispersed nanoparticles that are anchored to an oxide matrix. However, recent studies have shown that exsolved nanoparticles may still undergo coarsening over extended operating periods, posing challenges for long-term stability. In this work, we show that the strength of the metal-support interaction (MSI) between exsolved metal nanoparticles and the oxide matrix, tuned by the oxygen chemical potential, governs the dominant coarsening pathways of exsolved nanoparticles. We found a volcano-like relationship between MSI strength and the coarsening or growth rate of nanoparticles subjected to long-time annealing. We further reveal that weak MSI induced by a high surface oxygen vacancy concentration can accelerate particle migration and coalescence, while strong MSI led by a higher oxygen chemical potential favors Ostwald ripening, while both can cause instability of exsolved nanoparticles. These insights can inform the design of durable nanocatalysts by offering a mechanistic understanding of particle growth in metal exsolution.
- 9 December 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (51) , 47091-47101
Metal–Support Interaction Tuned by Oxygen Chemical Potential Governs Coarsening of Metal Nanoparticles Exsolved from Perovskite Oxides
Metal exsolution from perovskite oxides is a promising strategy for fabricating durable catalysts of uniformly dispersed nanoparticles that are anchored to an oxide matrix. However, recent studies have shown that exsolved nanoparticles may still undergo coarsening over extended operating periods, posing challenges for long-term stability. In this work, we show that the strength of the metal-support interaction (MSI) between exsolved metal nanoparticles and the oxide matrix, tuned by the oxygen chemical potential, governs the dominant coarsening pathways of exsolved nanoparticles. We found a volcano-like relationship between MSI strength and the coarsening or growth rate of nanoparticles subjected to long-time annealing. We further reveal that weak MSI induced by a high surface oxygen vacancy concentration can accelerate particle migration and coalescence, while strong MSI led by a higher oxygen chemical potential favors Ostwald ripening, while both can cause instability of exsolved nanoparticles. These insights can inform the design of durable nanocatalysts by offering a mechanistic understanding of particle growth in metal exsolution.
- 3 April 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (15) , 6348-6355
Quantifying Hydrogen Chemical Diffusivity in NdNiO3 Thin Films through Operando Multimodal Measurements
Nickelate oxides show unique properties that make them highly applicable in electrocatalysis, neuromorphic computing, and superconductors. Proton insertion, which effectively tunes their properties, is critical in advancing these applications. Its dynamics is governed by protonation kinetics, mainly controlled by hydrogen chemical diffusivity in nickelates. However, its precise quantification remains a significant knowledge gap, with reported values showing substantial discrepancies and a lack of comprehensive, rigorous methods. In this study, we propose a new quantitative approach that combines operando multimodal measurements. We provide the precise quantification of hydrogen chemical diffusivity in NdNiO3 (NNO), a prototypical nickelate, using rigorous kinetic modeling and cross-validation across multiple data dimensions. Our results reveal that proton mobility in NNO is inherently limited, challenging the assumption of its rapid transport in nickelates. This finding is critical for optimizing proton-based devices and paves the way for further understandings ion dynamics in correlated oxides.
- 3 April 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (15) , 6348-6355
Quantifying Hydrogen Chemical Diffusivity in NdNiO3 Thin Films through Operando Multimodal Measurements
Nickelate oxides show unique properties that make them highly applicable in electrocatalysis, neuromorphic computing, and superconductors. Proton insertion, which effectively tunes their properties, is critical in advancing these applications. Its dynamics is governed by protonation kinetics, mainly controlled by hydrogen chemical diffusivity in nickelates. However, its precise quantification remains a significant knowledge gap, with reported values showing substantial discrepancies and a lack of comprehensive, rigorous methods. In this study, we propose a new quantitative approach that combines operando multimodal measurements. We provide the precise quantification of hydrogen chemical diffusivity in NdNiO3 (NNO), a prototypical nickelate, using rigorous kinetic modeling and cross-validation across multiple data dimensions. Our results reveal that proton mobility in NNO is inherently limited, challenging the assumption of its rapid transport in nickelates. This finding is critical for optimizing proton-based devices and paves the way for further understandings ion dynamics in correlated oxides.
- 22 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (9) , 13342-13357
Establishing Quantitative Understanding of Defect-Tuned Properties in Functional Oxides by an Electrochemically-Induced Gradient of Ionic Defect Concentration
Tuning the physical and chemical properties of functional oxides by controlling the amount of ionic point defects has been recognized as a new paradigm of designing oxides with tailored functionality. In order to enable precise tuning of properties, it is important to construct quantitative relationships between properties of interest and concentration of ionic defects, which are conventionally achieved by synthesizing and measuring a large number of samples with varying defect concentration. Compared with this conventional method, which is labor-intensive and susceptible to sample-to-sample variations, this review focuses on a high-throughput method that utilizes an electrochemically induced gradient of defect concentration in one single oxide sample. Combined with spatially resolved characterizations, this method allows establishing a quantitative property-defect concentration relationship. This review will present working principles and case studies that use this method based on graded concentration of ionic defects. Potentials and future extensions of this method will also be discussed.
- 22 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (9) , 13342-13357
Establishing Quantitative Understanding of Defect-Tuned Properties in Functional Oxides by an Electrochemically-Induced Gradient of Ionic Defect Concentration
Tuning the physical and chemical properties of functional oxides by controlling the amount of ionic point defects has been recognized as a new paradigm of designing oxides with tailored functionality. In order to enable precise tuning of properties, it is important to construct quantitative relationships between properties of interest and concentration of ionic defects, which are conventionally achieved by synthesizing and measuring a large number of samples with varying defect concentration. Compared with this conventional method, which is labor-intensive and susceptible to sample-to-sample variations, this review focuses on a high-throughput method that utilizes an electrochemically induced gradient of defect concentration in one single oxide sample. Combined with spatially resolved characterizations, this method allows establishing a quantitative property-defect concentration relationship. This review will present working principles and case studies that use this method based on graded concentration of ionic defects. Potentials and future extensions of this method will also be discussed.
- 20 August 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (34) , 24167-24176
Deconvoluting Surface and Bulk Charge Storage Processes in Redox-Active Oxides by Integrating Electrochemical and Optical Insights
Redox-active transition metal oxides (TMOs) play crucial roles in diverse energy storage and conversion technologies, such as batteries and pseudocapacitors. These materials show intricate electrochemical charge storage processes, encompassing both bulk ion-intercalation, typical of battery electrodes, and pseudocapacitive-like behavior localized near the surfaces. However, understanding the underlying mechanisms of charge storage in redox-active TMOs is challenging due to the coexistence of these behaviors. In this study, we propose an integrated approach that combines operando electrochemical and optical techniques to disentangle the contributions of bulk and surface phenomena. Using birnessite δ-MnO2-x as a model system, we account for surface pseudocapacitive-like layers and employ a refined model that incorporates both surface reactions and bulk chemical diffusion. This methodology allows us to extract essential kinetic parameters, establishing a fundamental framework for unraveling surface and bulk electrochemical processes. This advancement provides a valuable tool for the rational design of energy storage devices, enhancing our ability to tailor these materials for specific applications.
- 20 August 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (34) , 24167-24176
Deconvoluting Surface and Bulk Charge Storage Processes in Redox-Active Oxides by Integrating Electrochemical and Optical Insights
Redox-active transition metal oxides (TMOs) play crucial roles in diverse energy storage and conversion technologies, such as batteries and pseudocapacitors. These materials show intricate electrochemical charge storage processes, encompassing both bulk ion-intercalation, typical of battery electrodes, and pseudocapacitive-like behavior localized near the surfaces. However, understanding the underlying mechanisms of charge storage in redox-active TMOs is challenging due to the coexistence of these behaviors. In this study, we propose an integrated approach that combines operando electrochemical and optical techniques to disentangle the contributions of bulk and surface phenomena. Using birnessite δ-MnO2-x as a model system, we account for surface pseudocapacitive-like layers and employ a refined model that incorporates both surface reactions and bulk chemical diffusion. This methodology allows us to extract essential kinetic parameters, establishing a fundamental framework for unraveling surface and bulk electrochemical processes. This advancement provides a valuable tool for the rational design of energy storage devices, enhancing our ability to tailor these materials for specific applications.
- 16 November 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 145 (47) , 25806-25814
Differentiating Oxygen Exchange Reaction Mechanisms across Phase Boundaries
Triggering phase transitions by controlling the anion stoichiometry is an effective method of tuning the electrocatalytic activity of the functional oxides. However, understanding the potential differences in the reaction mechanism(s) of different phases requires the accurate mapping of phase boundaries during the electrochemical reactions, which can be quite challenging. In this work, we have established a feasible electrochemical method based on the measurement of chemical capacitance to resolve the critical stoichiometry at phase boundaries under operando conditions. We select a simple binary oxide PrOx as a proof-of-principle model system, which shows excellent activity for high-temperature oxygen incorporation and evolution reactions (OIR/OER). We show that the phase transition can be sensitively probed by quantifying the chemical capacitance, which can be further used for differentiating the OIR/OER mechanisms across the phase boundary of PrOx. Therefore, our findings provide a new framework for exploring phase engineering as a tool for the design of electrocatalysts.
- 16 November 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 145 (47) , 25806-25814
Differentiating Oxygen Exchange Reaction Mechanisms across Phase Boundaries
Triggering phase transitions by controlling the anion stoichiometry is an effective method of tuning the electrocatalytic activity of the functional oxides. However, understanding the potential differences in the reaction mechanism(s) of different phases requires the accurate mapping of phase boundaries during the electrochemical reactions, which can be quite challenging. In this work, we have established a feasible electrochemical method based on the measurement of chemical capacitance to resolve the critical stoichiometry at phase boundaries under operando conditions. We select a simple binary oxide PrOx as a proof-of-principle model system, which shows excellent activity for high-temperature oxygen incorporation and evolution reactions (OIR/OER). We show that the phase transition can be sensitively probed by quantifying the chemical capacitance, which can be further used for differentiating the OIR/OER mechanisms across the phase boundary of PrOx. Therefore, our findings provide a new framework for exploring phase engineering as a tool for the design of electrocatalysts.
- 30 June 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (14) , 14005-14013
Quantifying Electrochemical Driving Force for Exsolution in Perovskite Oxides by Designing Graded Oxygen Chemical Potential
Metal nanoparticles exsolved and anchored at the parent perovskite oxide surfaces can greatly enhance the activity and antisintering stability for high-temperature (electro-) chemical catalytic reactions. While exsolution of nanoparticles triggered by using conventional high-temperature thermal reduction suffers from slow kinetics, using an electrochemical driving force can promote the exsolution rate. However, a quantitative correlation between the applied electrochemical driving force and the spatial density of exsolved nanoparticles remains unknown. In this work, we use a specially designed electrochemical device to induce a spatially graded voltage in a La0.43Ca0.37Ti0.94Ni0.06O3-δ electrode, in order to systematically investigate the effect of electrochemical switching on exsolution. With increasing driving force, which leads to decreasing oxygen chemical potential, the density of nanoparticles was observed to increase dramatically, while the average particle size remained roughly constant. We further identified oxygen vacancy pairs or clusters as the preferential nucleation sites for exsolution. Our work provided a high-throughput platform for the systematic study of exsolution of perovskite oxides targeted for fuel electrode materials with improved electrocatalytic performance and stability.
- 30 June 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (14) , 14005-14013
Quantifying Electrochemical Driving Force for Exsolution in Perovskite Oxides by Designing Graded Oxygen Chemical Potential
Metal nanoparticles exsolved and anchored at the parent perovskite oxide surfaces can greatly enhance the activity and antisintering stability for high-temperature (electro-) chemical catalytic reactions. While exsolution of nanoparticles triggered by using conventional high-temperature thermal reduction suffers from slow kinetics, using an electrochemical driving force can promote the exsolution rate. However, a quantitative correlation between the applied electrochemical driving force and the spatial density of exsolved nanoparticles remains unknown. In this work, we use a specially designed electrochemical device to induce a spatially graded voltage in a La0.43Ca0.37Ti0.94Ni0.06O3-δ electrode, in order to systematically investigate the effect of electrochemical switching on exsolution. With increasing driving force, which leads to decreasing oxygen chemical potential, the density of nanoparticles was observed to increase dramatically, while the average particle size remained roughly constant. We further identified oxygen vacancy pairs or clusters as the preferential nucleation sites for exsolution. Our work provided a high-throughput platform for the systematic study of exsolution of perovskite oxides targeted for fuel electrode materials with improved electrocatalytic performance and stability.