SNSwapnil Nalawade

Swapnil Nalawade

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Swapnil Nalawade has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Transformation of TiN to TiNO Films via In-Situ Temperature-Dependent Oxygen Diffusion Process and Their Electrochemical Behavior

    by Sheilah Cherono, Ikenna Chris-Okoro, Mengxin Liu, R. Soyoung Kim, Swapnil Nalawade, Wisdom Akande, Mihai Maria-Diana, Johannes Mahl, Christopher Hale, Junko Yano, et al.

    Titanium oxynitride (TiNO) thin films represent a multifaceted material system applicable in diverse fields, including energy storage, solar cells, sensors, protective coatings, and electrocatalysis. This study reports the synthesis of TiNO thin films grown at different substrate temperatures using pulsed laser deposition. A comprehensive structural investigation was conducted by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Non-Rutherford backscattering spectrometry (N-RBS), and X-ray absorption spectroscopy (XAS), which facilitated a detailed analysis that determined the phase, composition, and crystallinity of the films. Structural control was achieved via temperature-dependent oxygen in-diffusion, nitrogen out-diffusion, and the nucleation growth process related to adatom mobility. The XPS analysis indicates that the TiNO films consist of heterogeneous mixtures of TiN, TiNO, and TiO2 phases with temperature-dependent relative abundances. The correlation between the structure and electrochemical behavior of the thin films was examined. The TiNO films with relatively higher N/O ratio, meaning less oxidized, were more electrochemically active than the films with lower N/O ratio, i.e., more oxidized films. Films with higher oxidation levels demonstrated enhanced crystallinity and greater stability under electrochemical polarization. These findings demonstrate the importance of substrate temperature control in tailoring the properties of TiNO film, which is a fundamental part of designing and optimizing an efficient electrode material.


  • Open Access

    Role of Oxygen Concentration in Reactive Sputtering of RuO2 Thin Films: Tuning Surface Chemistry for Enhanced Electrocatalytic Performance

    by Swapnil Nalawade, Ebenezer Vondee, Mengxin Liu, Ikenna Chris-Okoro, Sheilah Cherono, Dhananjay Kumar, Shyam Aravamudhan

    Developing active electrocatalysts for water splitting is a great challenge due to slow four-electron transfer oxygen evolution reaction. Here, we report the effect of variable oxygen concentrations in sputtered RuO2 thin films on electrochemical performance. The impact of Ar/O2 ratios on the structural, chemical, and optical properties of sputtered RuO2 films is systematically investigated. The as-deposited amorphous RuO2 showed higher catalytic activity as compared to its annealed crystalline counterparts. The X-ray photoelectron spectroscopy results showed controlled stoichiometry with 20% oxygen. The electrochemical measurements of the RuO2 deposited with a 4:1 Ar:O2 ratio showed superior performance in cyclic voltammetry, linear sweep voltammetry, and Tafel slope. Transformation of as-deposited amorphous RuO2 into polycrystalline films is observed at 400 °C of annealing temperature. Film thickness is increased with increasing O2 concentration during deposition. This study highlights that sputtered RuO2 thin films with varying oxygen concentration during deposition can influence the electrocatalytic activities in water-splitting applications.


  • Open Access

    Defect Quantification of Metal Organic Chemical Vapor Deposition (MOCVD) Monolayer Molybdenum Disulphide (MoS 2 ) using Kelvin Probe Force Microscopy

    by Moha Feroz Hossen, Sachin Shendokar, Swapnil Nalawade, Olubukola Ayanbajo, Kyle Nowlin, Shyam Aravamudhan

    Defects are unavoidable during the synthesis of materials due to thermodynamic equilibrium. In the synthesis of two-dimensional transition metal dichalcogenide (2D TMDC), point defects emerge as a dominant defect due to the absence of chalcogen atoms in the lattice structure. In one or a few layers of TMDC materials, the presence of defect states on the film surface changes their carrier concentration. The changing of carrier concentration in monolayer TMDC film shifts the position of the fermi level towards either conduction band edge or valence band edge depending on the type of majority carriers. The shifting of the fermi level changes the work function of the TMDC monolayer film. The conventional hall measurement is not feasible to measure the surface carrier concentration of 2D materials films. Instead, kelvin probe force microscopy (KPFM) is used to measure surface carrier density. The carrier density is calculated by measuring the work function of the monolayer film using KPFM. Each point defect in 2D TMDC materials increases the certain amount of carrier concentration that facilitates the defect quantification. In this work, we tried to quantify point defect in metal-organic chemical vapor deposition (MOCVD) monolayer MoS 2 using kelvin probe force microscopy (KPFM) by measuring the position of the fermi level that is shifted due to the unbounded electrons of MoS 2 .

  • Open Access

    Predictive Evaluation of Atomic Layer Deposition Characteristics for Synthesis of Al2O3 thin Films

    by Sachin Shendokar, Moha Feroz Hossen, Swapnil Nalawade, Shobha Mantripragada, Shyam Aravamudhan

    The atomic layer deposition (ALD) synthesis process is being heavily researched for its conformality, high aspect ratio with thickness control, selective area deposition versatility, and variety of low-temperature oxide, nitride, and transition metal dichalcogenide (TMDC) precursors for a multitude of applications. Repeatability and reproducibility are essential, along with large-scale deposition with high throughput from the commercialization perspective. JMP and Design of Experiment (DoE) are industrially practiced tools to study and reduce process variations. This research paper demonstrates the application of DoE in JMP for the predictive evaluation of ALD for the synthesis of Al2O3.