Jiandong Hu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jiandong Hu has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
N. Li
Jilin University, Ministry of Education, College of Materials Science and Engineering, The key Lab of Automobile Materials, Changchun, China
1 shared publicationSebastiano Tosto
ENEA Casaccia Via Anguillarese 301 Roma 00123 Italy
1 shared publicationXianfeng Dong
College of Materials Science and Engineering The Key Lab of Automobile Materials, Ministry of Education Jilin University Changchun 130025 China
1 shared publicationZ. Guo
Jilin University, Ministry of Education, College of Materials Science and Engineering, The key Lab of Automobile Materials, Changchun, China
1 shared publication
Latest Publications
- Open Access
- 1 January 2015
- Published by National Library of Serbia in Science of Sintering
- Vol. 47 (2) , 165-174
Cu-TiB metal matrix composites prepared by powder metallurgy route
Titanium boride (TiB) is characterized by good conductivity, high strength and high melting point. In this work, TiB was used to make Cu-TiB metal matrix composites (MMCs). Amounts of TiB added into Cu matrix were 2wt.%, 5wt.%, 10 wt.% and 15 wt.%. The samples were pressed at pressures of 500MPa, 600MPa, 700MPa and 800MPa and sintered at 820o and 920o, respectively. The properties of the sintered composites such as hardness and impact toughness were studied. Hardness and impact toughness of samples increased with increasing pressures and decreased with increasing contents of TiB. Composite with good mechanical properties and high conductivity was obtained from the sample containing 2wt.%TiB compacted at 800MPa and sintered at 920o. It was shown that 2wt.% TiB is a suitable content to make Cu-TiB MMCs with good mechanical properties and excellent conductivity.
- 1 January 2015
- Published by National Library of Serbia in Science of Sintering
- Vol. 47 (2) , 165-174
Open AccessCu-TiB metal matrix composites prepared by powder metallurgy route
Titanium boride (TiB) is characterized by good conductivity, high strength and high melting point. In this work, TiB was used to make Cu-TiB metal matrix composites (MMCs). Amounts of TiB added into Cu matrix were 2wt.%, 5wt.%, 10 wt.% and 15 wt.%. The samples were pressed at pressures of 500MPa, 600MPa, 700MPa and 800MPa and sintered at 820o and 920o, respectively. The properties of the sintered composites such as hardness and impact toughness were studied. Hardness and impact toughness of samples increased with increasing pressures and decreased with increasing contents of TiB. Composite with good mechanical properties and high conductivity was obtained from the sample containing 2wt.%TiB compacted at 800MPa and sintered at 920o. It was shown that 2wt.% TiB is a suitable content to make Cu-TiB MMCs with good mechanical properties and excellent conductivity.
- 18 May 2012
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 95 (7) , 2089-2092
Microstructure of Face Centered Cubic (fcc) TiB Powder Synthesized by Boronizing of Ti Powder
High resolution transmission electron microscopy ( HRTEM ) and X‐ray diffraction ( XRD ) techniques were used to examine the crystal structure of TiB ceramic powder synthesized by a Ti ‐Boronizing method. The HRTEM analysis revealed that the synthesized titanium boride has fcc crystal structure, with titanium and boron atoms alternatively arranged like Na and Cl ions in NaCl ‐type lattice. The crystal structure of this boride phase, denoted as fcc‐ TiB in the paper, was confirmed also by XRD analysis and agrees with the data reported in the card PDF # 06‐641. This card is present in the powder diffraction file ( PDF ) database, but seldom quoted in literature because the typical crystal structure of TiB that forms in situ as a phase is orthorhombic. The present work reports new experimental data on the crystal properties of pure fcc‐ TiB not yet reported in the literature. The lattice parameter of fcc‐ TiB , calculated from XRD analysis, is a 0 =4.245 Å.
- 18 May 2012
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 95 (7) , 2089-2092
Microstructure of Face Centered Cubic (fcc) TiB Powder Synthesized by Boronizing of Ti Powder
High resolution transmission electron microscopy ( HRTEM ) and X‐ray diffraction ( XRD ) techniques were used to examine the crystal structure of TiB ceramic powder synthesized by a Ti ‐Boronizing method. The HRTEM analysis revealed that the synthesized titanium boride has fcc crystal structure, with titanium and boron atoms alternatively arranged like Na and Cl ions in NaCl ‐type lattice. The crystal structure of this boride phase, denoted as fcc‐ TiB in the paper, was confirmed also by XRD analysis and agrees with the data reported in the card PDF # 06‐641. This card is present in the powder diffraction file ( PDF ) database, but seldom quoted in literature because the typical crystal structure of TiB that forms in situ as a phase is orthorhombic. The present work reports new experimental data on the crystal properties of pure fcc‐ TiB not yet reported in the literature. The lattice parameter of fcc‐ TiB , calculated from XRD analysis, is a 0 =4.245 Å.