JGJoe C. Goodall

Joe C. Goodall

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Joe C. Goodall has a total of 118 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Challenges in ALD precursor design: mechanism of intramolecular C–H activation by internal deprotonation of tin( ii ) precursors

    by Joe C. Goodall, Agustín Morales, Samuel H. Foote, Oliver W. S. Clark, Benjamin J. Peek, Craig M. Robertson, Paul R. Chalker, Claire L. McMullin, Andrew L. Johnson

    The thermal decomposition of homoleptic bis( N -alkyl-substituted-silylamido)stannylenes [Sn{NR(TMS)} 2 ] [R = i Pr, Cy, t Bu, Ad (Ad = 1-adamantyl), CPh 3 ] results in the intramolecular C–H activation by deprotonation and formation of tin( iv ) spiro products and tin(0).


  • Open Access

    Controlled Amine-Borane Dehydropolymerization Enabled by Mechanistic Insight Using the Ir( t Bu-POCOP)H 2 Catalyst

    by Chloe M. Van Beek, M. Arif Sajjad, Joe C. Goodall, Catherine L. Lyall, John P. Lowe, Simon B. Duckett, J. Scott McIndoe, Charles Killeen, Guy C. Lloyd-Jones, Ulrich Hintermair, et al.

    A detailed kinetic, mechanism, and operando speciation study on the controlled, catalytic, cascade-like dehydropolymerization of H3B·NMeH2 to form N-methyl polyaminoborane [H2BNMeH]n (Me-PAB) using Ir(tBu-POCOP)H2 as a precatalyst is reported. Catalyst speciation, as monitored using online FlowNMR, shows the formation of a borohydride complex Ir(tBu-POCOP)(H)(BH4) during an induction period, that rapidly speciates to Ir(tBu-POCOP)H4 during productive turnover. Kinetic studies in the roles of NMeH2, trace water, and [H3B·NMeH2] on the induction period, productive catalysis and speciation reveal a complex set of processes that provide a framework for numerical and computational (DFT) modeling. Collectively these combine to support a mechanism for the dehydrogenation of H3B·NMeH2 to form the actual monomer, H2B═NMeH, that involves concerted B-H/N-H activation. By understanding the factors that control the maximum rate of dehydrogenation [ν(max)] and catalyst speciation, and deploying temperature variation and amine additives, a wide-range of Me-PAB molecular weights (Mn = 35,000-191,200 g·mol-1) can be achieved; in addition to low catalyst loadings (21 ppm), multigram scales (16 g) and water/air tolerance. The development of such systems which operate to selectively produce Me-PAB, using as-supplied substrates and simple catalysts, that also work on a scale useful for materials testing, promotes the wider exploitation of Me-PAB as a general preceramic precursor to hex-boron nitride.

  • Open Access

    Influence of aluminium incorporation on the semiconducting properties of p-type tin monoxide

    by Benjamin J Peek, Matthew Werner, Kham Niang, Xiao Chen, Andrew J Flewitt, Oliver W S Clark, Joe C Goodall, Andrew L Johnson, Satyajit Das, Feras Alkhalil, et al.

    Herein, we report the first thin film transistor TFTs using Sn (HMDS) 2 as a precursor for the atomic layer deposition (ALD) of SnO. We subsequently investigate the incorporation of Al-ions in the device channel, from three aluminium sources using low energy ion scattering (LEIS). Alumina is widely exploited in the fabrication of p-type tin monoxide (SnO) TFTs. It has been used as a surface passivation, as a dopant, and as a substrate barrier layer. Alumina is a source of Al 3+ , which is a compensating donor in SnO. We demonstrate that the intentional incorporation of aluminium into SnO, by introducing alumina cycles during ALD has the effect of increasing the sheet resistance of the SnO films by 10 5 times and amorphising the film microstructure. Furthermore, the incorporation of Al ions from alumina passivation-capping and barrier layers is revealed at their interfaces with the SnO TFT channel. The transfer characteristics of TFTs fabricated from Al-doped and capped SnO films are used to show the effects of annealing, which are explained in terms of Al ion incorporation. Interdiffusion or incorporation of Al ions into the SnO semiconductor, identified by depth profile LEIS, indicates that auto-doping plays a significant role in modifying the characteristics of SnO TFTs. The application of alumina layers in the design of p-type tin monoxide TFTs must take into account the influence of Al ion incorporation on the semiconducting properties of SnO.


  • Open Access

    The characterisation and reactivity of a Rh iii η 1 -σ-alkane complex and the role of a structurally responsive phosphine ligand in solid-state molecular organometallic chemistry

    by Joe C. Goodall, M. Arif Sajjad, Samantha Kathleen Furfari, Kristof M. Altus, Theo S. C. Hatcher, Graham J. Tizzard, Samuel J. Page, Mark R. Warren, Jason Martin Lynam, Stuart Alan Macgregor, et al.

    Reversible in crystallo C–H activation of a phosphine backbone allows acces to a rhodium η 1 -σ-alkane complex.


  • Open Access

    Atomic Layer Deposition of Disordered p‐Type SnO Using a Heteroleptic Tin(II) Precursor: Influence of Disorder on P‐Channel SnO Thin‐Film Transistor Characteristics

    by Benjamin J. Peek, Kham Man Niang, Benjamin McMitchell, Heath Bagshaw, Karl Dawson, Adrian Gardner, Babak Bakhit, James D. Parish, Oliver W. S. Clark, Joe C. Goodall, et al.

    The readily scalable deposition of amorphous oxide semiconductor films is desirable for polymer‐based flexible and large‐area thin‐film transistor technology. Here, the atomic layer deposition (ALD) of p‐type SnO is demonstrated using a new heteroleptic tin(II) precursor. The films exhibit a disordered microstructure, due to the intercalation of fragments of the precursor ligands. Annealing induces crystallization of SnO, as volatile impurities are expelled from the film. Initial examination of bottom gate SnO thin‐film transistors with SiO 2 dielectric exhibit a maximum field‐effect mobility of 1.9 cm 2 V −1 s −1 and a minimum threshold voltage of 2 V, just before the onset of crystallization. Once capped with an alumina passivation layer, the devices have stable transfer characteristics, post annealing, over a period of two years, and a stable field effect mobility under negative bias stress of 1 MV cm −1 for 2 h at ambient. The disordered SnO semiconductor characteristics make it a candidate for polymer‐based CMOS electronics, where a low thermal budget meets the requirements of polymeric substrates.


  • Open Access

    Solid-state molecular organometallic chemistry (SMOM): a user guide to in crystallo single-crystal to single-crystal transformations using solid/gas methods

    by Kristof M. Altus, Samantha Kathleen Furfari, Joe C. Goodall, Matthew Robert Gyton, Jack H. Heaton, Chloe L. Johnson, Alasdair I. McKay, Mads Sondrup Møller, Sebastian D. Pike, Andrew S. Weller

    This tutorial review provides a practical guide for solid/gas in crystallo solid-state molecular organometallic chemistry (SMOM).


  • Open Access

    Zinc Metallacarborane Chemistry

    by Kerry R. Flanagan, Chloe L. Johnson, Joe C. Goodall, Claire L. McMullin, Andrew L. Johnson

    This work presents a new family of zincacarborane complexes synthesized from ZnMe2 and [C2B9H13], using neutral two-electron donor ligands: N-heterocyclic carbenes (NHCs) yield the first closo-12-vertex half-sandwich zincocenes, [(NHC)Zn(C2B9H11)] (1-3), while bulkier NHCs form slipped bis-dicarbollide salts (4-5). Use of pyridine leads to the macropolyhedral dimer (6) with a planar {Zn2B2} motif, and triphenylphosphine gives a V-shaped η3-borallyl complex (7). Structures have been confirmed by single-crystal X-ray diffraction and NMR spectroscopy. Computational studies (DFT and QTAIM) show predominantly ionic Zn-dicarbollide bonding with notable polar covalent character. Apparent Zn···Zn interactions are weak electrostatic contacts, and metal-ligand bonding is exclusively to boron atoms. Together, these findings broaden the structural and electronic landscape of zincacarboranes, challenge assumptions about d10 metal-carborane bonding, and offer a new platform for exploring group 12 metallacarborane reactivity.


  • Open Access

    Precursor Development for Aerosol‐Assisted Chemical Vapor Deposition of α‐Fe2O3 and BiFeO3 as Effective Photoanodes for Photoelectrochemical Water Splitting

    by Charles Brown, Thom R. Harris‐Lee, Quan Yee Tey, Joe C. Goodall, Matthew Surman, Meng Nan Chong, Andrew L. Johnson

    Photoelectrochemical (PEC) water splitting holds great potential to convert solar energy into hydrogen fuel, establishing an effective method for long‐term renewable energy storage. Herein, a simple and effective approach is presented for fabricating thin films of α‐Fe2O3 and BiFeO3 for use as PEC photoanodes via aerosol‐assisted chemical vapor deposition (AACVD). A new Fe(III) precursor bearing an amino‐tris‐tert‐butoxide ligand is designed and coupled with a Bi‐based precursor bearing the same ligand framework to deposit nanostructured films of α‐Fe2O3 and BiFeO3 with high phase purity. Under 1 sun solar irradiation α‐Fe2O3 and BiFeO3 yielded a photocurrent density of 0.38 and 0.42 mA cm−1 at 1.23 VRHE, respectively. A study reveals that the bespoke precursors exhibit remarkable compatibility with one another, producing films of significantly higher quality compared to those produced with more conventional precursors not optimized for AACVD.


  • Open Access

    Nickel Pyrrolide Complexes as Precursors for the Chemical Vapor Deposition of Metallic Thin Films of Nickel

    by Thomas Pugh, Joe C. Goodall, Kieran C. Molloy, Andrew L. Johnson

    We report here the synthesis of a novel class of precursors for the chemical vapor deposition (CVD) of thin films of metallic, face-centered cubic (fcc) nickel. The complexes are simple and inexpensive to synthesize, possess high volatility (vapor pressure = 0.1 Torr at 40 °C), and enable rapid deposition rates of nickel under CVD conditions (up to 6.5 nm/min at 250 °C). We show that the deposited nickel films have high elemental purity (>99 at%), resistivity comparable to bulk nickel (7-23 μΩ·cm cf. 6.93 μΩ·cm), exhibit shallow surface features (ca. ± 10 nm), and very low surface roughness (RMS = 2.72 nm). These data compare favorably with those of the current state-of-the-art metallic nickel CVD precursors.


  • Open Access

    An Operationally Unsaturated Iridium-Pincer Complex That C–H Activates Methane and Ethane in the Crystalline Solid-State

    by Matthew R. Gyton, M. Arif Sajjad, Daniel J. Storm, Kristof M. Altus, Joe C. Goodall, Chloe L. Johnson, Samuel J. Page, Alison J. Edwards, Ross O. Piltz, Simon B. Duckett, et al.

    The known complex [Ir(tBu-PONOP)MeH][BArF4], 1[BArF4] [tBu-PONOP = κ3-2,6-(tBu2PO)2C5H3N); ArF = 3,5-(CF3)2(C6H3); J. Am. Chem. Soc. 2009, 131, 8603], is a robust precursor for in crystallo single-crystal to single-crystal (SC-SC) C-H activation of methane and ethane at 80 °C. This contrasts with the reported solution (CD2Cl2) behavior, where 1[BArF4] decomposes by methane loss. Crystalline 1[BArF4] is accessed as a single polymorph on a gram scale. A single-crystal neutron diffraction study locates the hydride. 13C{1H} SSNMR experiments on 1[BArF4], and its isotopologue [Ir(tBu-PONOP)(CD3)D][BArF4], d4-1[BArF4], suggest a rapid and reversible endergonic reductive bond formation is occurring in crystallo to access an Ir(I) σ-methane complex. Heating 1[BArF4] to 80 °C under high vacuum results in loss of methane and intramolecular C-H activation to form cyclometalated [Ir(cyclo-tBu-PONOP')H][BArF4], 2[BArF4], in a SC-SC reaction. This is reversible, and the addition of CH4 or CD4 to 2[BArF4] at 80 °C results in an equilibrium with 1[BArF4] or d4-1[BArF4], respectively. Complex 2[BArF4] is thus an operationally unsaturated source of 14-electron [Ir(tBu-PONOP)][BArF4], III, that undergoes C-H activation with methane. Periodic DFT studies, alongside isotope labeling experiments, link 1[BArF4] and 2[BArF4]/CH4 via a reductive elimination/oxidative addition pathway. Heating 2[BArF4] to 80 °C under N2 forms [Ir(tBu-PONOP)(κ1-N2)][BArF4], in a SC-SC transformation. Reaction with CO forms [Ir(tBu-PONOP)(CO)][BArF4] at room temperature. Calculations suggest reaction with N2 occurs via an associative process or competitively through III, while with CO only an associative process operates. Heating 2[BArF4] to 80 °C under an ethane atmosphere results in alkane dehydrogenation, via a SC-SC reaction, forming a ∼1:1 mixture of [Ir(tBu-PONOP)(η2-H2C═CH2)][BArF4], and [Ir(tBu-PONOP)H2][BArF4].