Yiren Zhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yiren Zhu has a total of 140 co-authors. Here are the top co-authors by number of shared publications:
- Na Wu
Southwestern Institute of Physics
6 shared publications - W. L. Zhong
Southwestern Institute of Physics
6 shared publications - Yi Zhang
Southwestern Institute of Physics
6 shared publications - Guang-Zhou Hao
Southwestern Institute of Physics
5 shared publications - Rui Ke
Southwestern Institute of Physics
5 shared publications - Xin Yu
Southwestern Institute of Physics
5 shared publications
Latest Publications
- Open Access
- 3 November 2026
- Published by IOP Publishing in Nuclear Fusion
First experimental observation of "Staircase" high confinement mode in tokamak plasma
In magnetically confined nuclear fusion, the achievement of ignition necessitates the tokamak plasma in a high confinement state known as H-mode. A major challenge encountered in the standard H-mode is the abrupt collapse of its ultrathin edge layer. Here, we report a first experimental demonstration that a stable H-mode can be sustained by a staircase plasma profile. The basic physical picture is: by staircasing the plasma profile, the potential free energy stored in one single large edge layer is distributed into multiple mesoscale layers throughout the entire plasma volume. Consequently, the large scale edge collapse is converted into small scale desynchronized fluctuations, effectively reducing the risk of violent relaxation event. This finding uncovers a new benign high confinement regime of the tokamak plasma.
- 3 November 2026
- Published by IOP Publishing in Nuclear Fusion
Open AccessFirst experimental observation of "Staircase" high confinement mode in tokamak plasma
In magnetically confined nuclear fusion, the achievement of ignition necessitates the tokamak plasma in a high confinement state known as H-mode. A major challenge encountered in the standard H-mode is the abrupt collapse of its ultrathin edge layer. Here, we report a first experimental demonstration that a stable H-mode can be sustained by a staircase plasma profile. The basic physical picture is: by staircasing the plasma profile, the potential free energy stored in one single large edge layer is distributed into multiple mesoscale layers throughout the entire plasma volume. Consequently, the large scale edge collapse is converted into small scale desynchronized fluctuations, effectively reducing the risk of violent relaxation event. This finding uncovers a new benign high confinement regime of the tokamak plasma.
- Open Access
- 13 October 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (12) , 126047
A novel high-performance confinement regime in a tokamak driven by tearing mode locking and rotation shear
In magnetically confined fusion plasmas, tearing mode (TM) locking is conventionally regarded as detrimental, often halting rotation and triggering disruptions. Contrary to this expectation, we demonstrate that locked TMs can enhance confinement by inducing an internal transport barrier (ITB). Specifically, the interaction between a locked outer plasma region and neutral beam injection (NBI)-driven core rotation generates a broad and intense toroidal velocity shear layer, which suppresses turbulence and improves core confinement. Beam emission spectroscopy and charge exchange recombination spectroscopy confirm a substantial reduction in turbulent transport and a rise in core ion temperature exceeding T i > 9 keV . This phenomenon—termed the Locking-Induced Flow and Transport (LIFT) mode—transforms a traditionally disruptive mechanism into a confinement enhancement strategy.
- 13 October 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (12) , 126047
Open AccessA novel high-performance confinement regime in a tokamak driven by tearing mode locking and rotation shear
In magnetically confined fusion plasmas, tearing mode (TM) locking is conventionally regarded as detrimental, often halting rotation and triggering disruptions. Contrary to this expectation, we demonstrate that locked TMs can enhance confinement by inducing an internal transport barrier (ITB). Specifically, the interaction between a locked outer plasma region and neutral beam injection (NBI)-driven core rotation generates a broad and intense toroidal velocity shear layer, which suppresses turbulence and improves core confinement. Beam emission spectroscopy and charge exchange recombination spectroscopy confirm a substantial reduction in turbulent transport and a rise in core ion temperature exceeding T i > 9 keV . This phenomenon—termed the Locking-Induced Flow and Transport (LIFT) mode—transforms a traditionally disruptive mechanism into a confinement enhancement strategy.
- Open Access
- 1 October 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (10) , 105005
Radial propagation of ELM filaments and boundary turbulence characteristics with divertor heat flux mitigation in the small-ELM regime on HL-2A
This study investigated the radial propagation of edge-localized-mode (ELM) filaments and boundary turbulence characteristics with divertor heat flux mitigation in the small-ELM regime on the HL-2A tokamak. Divertor nitrogen seeding mitigated divertor heat flux while maintaining high plasma performance ( H 98 > 1.0 and β N > 2.0 ) , with negligible degradation of total stored energy and energy confinement time. In the pedestal, the pressure gradient and ELM amplitudes decreased after divertor heat flux mitigation. Magnetic perturbation diminished while electrostatic turbulence increased, with poloidal velocity shear remaining unchanged in the pedestal. Turbulent particle flux and perpendicular heat flux decreased in the far scrape-off layer (SOL) region. The ELM-filament burst rates and conditionally averaged amplitudes from the pedestal to the near-SOL and far-SOL regions were systematically investigated before and after heat flux mitigation. In the pedestal, the ELM-filament burst rates increased, whereas the ELM-filament amplitudes decreased after heat flux mitigation. The evolution of near-SOL filaments was partially reflected by that at the outer divertor target ( ρ ≈ 0.99 − 1.09 ). At the divertor target, the filament burst rates were larger at ρ ≈ 1.01 but became smaller at ρ ≈ 1.09 . The burst rate of filaments in the far-SOL region ( ρ ≈ 1.16 ) decreased dramatically, resulting in a significant reduction in filament transport after divertor heat flux mitigation. These results provide deeper insights into the radial propagation of ELM filaments and aid in understanding power deposition on the first wall in the small-ELM regime.
- 1 October 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (10) , 105005
Open AccessRadial propagation of ELM filaments and boundary turbulence characteristics with divertor heat flux mitigation in the small-ELM regime on HL-2A
This study investigated the radial propagation of edge-localized-mode (ELM) filaments and boundary turbulence characteristics with divertor heat flux mitigation in the small-ELM regime on the HL-2A tokamak. Divertor nitrogen seeding mitigated divertor heat flux while maintaining high plasma performance ( H 98 > 1.0 and β N > 2.0 ) , with negligible degradation of total stored energy and energy confinement time. In the pedestal, the pressure gradient and ELM amplitudes decreased after divertor heat flux mitigation. Magnetic perturbation diminished while electrostatic turbulence increased, with poloidal velocity shear remaining unchanged in the pedestal. Turbulent particle flux and perpendicular heat flux decreased in the far scrape-off layer (SOL) region. The ELM-filament burst rates and conditionally averaged amplitudes from the pedestal to the near-SOL and far-SOL regions were systematically investigated before and after heat flux mitigation. In the pedestal, the ELM-filament burst rates increased, whereas the ELM-filament amplitudes decreased after heat flux mitigation. The evolution of near-SOL filaments was partially reflected by that at the outer divertor target ( ρ ≈ 0.99 − 1.09 ). At the divertor target, the filament burst rates were larger at ρ ≈ 1.01 but became smaller at ρ ≈ 1.09 . The burst rate of filaments in the far-SOL region ( ρ ≈ 1.16 ) decreased dramatically, resulting in a significant reduction in filament transport after divertor heat flux mitigation. These results provide deeper insights into the radial propagation of ELM filaments and aid in understanding power deposition on the first wall in the small-ELM regime.
- Open Access
- 15 September 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (10) , 106056
Design of a high- β N operation scenario for the HL-3 tokamak
Future fusion reactors require high normalized beta ( β N ) operation to achieve economically attractive power density. High- β N operation is also a key objective for the HL-3 tokamak. Designing a stable and robust operational scenario prior to experiments is therefore essential for the successful execution of high- β N campaigns. This study presents the design of an H-mode scenario with β N > 3 for HL-3 at a plasma current of 2 MA and a toroidal magnetic field of 2.2 T. A multi-level integrated modeling approach is employed, progressing from macroscopic parameter determination and zero-dimensional (0-D) scans to 1.5-dimensional dynamic scenario construction. Using the OMFIT framework, modules including EFIT, ONETWO, TORAY, TGYRO, and EPED1-NN are coupled to obtain self-consistent plasma equilibria and radial profiles. Two heating schemes are considered: pure neutral beam injection (NBI, 10 MW) and NBI combined with electron cyclotron resonance heating (ECRH, 8 MW + 2 MW). Both scenarios achieve β N > 3 , with a plasma stored energy of approximately 2.9 MJ and a confinement factor H 98 ≈ 1.8 . A complete discharge waveform is developed, covering null-field breakdown, current ramp-up, and flat-top phases. Divertor heat flux analysis using SOLPS-ITER indicates that without impurity seeding, the heat load on the lower divertor target exceeds the material limit ( 7 MW m − 2 ); neon seeding at ∼ 1 × 10 20 s − 1 can reduce the peak heat flux to below 6 MW m − 2 , approaching detachment conditions. Magnetohydrodynamic (MHD) stability analysis confirms resilience to vertical displacement events (VDEs), resistive wall modes (RWMs), and neoclassical tearing modes (NTMs), though edge localized modes (ELMs) are expected due to peeling–ballooning (P–B) instability, requiring active mitigation. This work provides a physics foundation and engineering roadmap for high- β N experiments on HL-3.
- 15 September 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (10) , 106056
Open AccessDesign of a high- β N operation scenario for the HL-3 tokamak
Future fusion reactors require high normalized beta ( β N ) operation to achieve economically attractive power density. High- β N operation is also a key objective for the HL-3 tokamak. Designing a stable and robust operational scenario prior to experiments is therefore essential for the successful execution of high- β N campaigns. This study presents the design of an H-mode scenario with β N > 3 for HL-3 at a plasma current of 2 MA and a toroidal magnetic field of 2.2 T. A multi-level integrated modeling approach is employed, progressing from macroscopic parameter determination and zero-dimensional (0-D) scans to 1.5-dimensional dynamic scenario construction. Using the OMFIT framework, modules including EFIT, ONETWO, TORAY, TGYRO, and EPED1-NN are coupled to obtain self-consistent plasma equilibria and radial profiles. Two heating schemes are considered: pure neutral beam injection (NBI, 10 MW) and NBI combined with electron cyclotron resonance heating (ECRH, 8 MW + 2 MW). Both scenarios achieve β N > 3 , with a plasma stored energy of approximately 2.9 MJ and a confinement factor H 98 ≈ 1.8 . A complete discharge waveform is developed, covering null-field breakdown, current ramp-up, and flat-top phases. Divertor heat flux analysis using SOLPS-ITER indicates that without impurity seeding, the heat load on the lower divertor target exceeds the material limit ( 7 MW m − 2 ); neon seeding at ∼ 1 × 10 20 s − 1 can reduce the peak heat flux to below 6 MW m − 2 , approaching detachment conditions. Magnetohydrodynamic (MHD) stability analysis confirms resilience to vertical displacement events (VDEs), resistive wall modes (RWMs), and neoclassical tearing modes (NTMs), though edge localized modes (ELMs) are expected due to peeling–ballooning (P–B) instability, requiring active mitigation. This work provides a physics foundation and engineering roadmap for high- β N experiments on HL-3.
- 1 July 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (7) , 075042
Simulations of SMBI on high-field and low-field sides of the HL-2A tokamak
Enhancing plasma injection efficiency and penetration depth is crucial for achieving high-performance steady-state fusion confinement in ITER, the next generation magnetic confinement fusion device. Based on the trans-neut module within the BOUT++ boundary plasma turbulence program framework, this study conducts two-dimensional simulations and comparative analyses of supersonic molecular beam injection (SMBI) on the high-field side (HFS) and the low-field side (LFS), using the actual divertor geometry of the HL-2 A tokamak. The physical model encompasses plasma density, heat, and momentum transport equations, as well as neutral particle density and momentum transport equations. The results show that HFS SMBI produces deeper neutral penetration in normalized poloidal-flux space than LFS SMBI. The ion density inside the LCFS in the HFS case reaches about 1.5–2 times that in the LFS case, accompanied by a stronger reduction of the edge plasma temperature. The deeper HFS penetration is associated with the smaller local field-line slope on the HFS path, which causes a finite-width SMBI source to be mapped differently along the magnetic field compared with the LFS case. These results indicate that HFS SMBI can enhance both the penetration depth and the fueling efficiency in the present HL-2 A geometry.
- 1 July 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (7) , 075042
Simulations of SMBI on high-field and low-field sides of the HL-2A tokamak
Enhancing plasma injection efficiency and penetration depth is crucial for achieving high-performance steady-state fusion confinement in ITER, the next generation magnetic confinement fusion device. Based on the trans-neut module within the BOUT++ boundary plasma turbulence program framework, this study conducts two-dimensional simulations and comparative analyses of supersonic molecular beam injection (SMBI) on the high-field side (HFS) and the low-field side (LFS), using the actual divertor geometry of the HL-2 A tokamak. The physical model encompasses plasma density, heat, and momentum transport equations, as well as neutral particle density and momentum transport equations. The results show that HFS SMBI produces deeper neutral penetration in normalized poloidal-flux space than LFS SMBI. The ion density inside the LCFS in the HFS case reaches about 1.5–2 times that in the LFS case, accompanied by a stronger reduction of the edge plasma temperature. The deeper HFS penetration is associated with the smaller local field-line slope on the HFS path, which causes a finite-width SMBI source to be mapped differently along the magnetic field compared with the LFS case. These results indicate that HFS SMBI can enhance both the penetration depth and the fueling efficiency in the present HL-2 A geometry.
- Open Access
- 13 January 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (2) , 022001
Experimental observation and edge characteristics of EDA H-mode on the HL-3 tokamak
The enhanced D α (EDA) H-mode features high energy confinement together with the absence of edge localized modes (ELMs) and impurity accumulation, making it highly attractive for fusion reactors. The EDA H-mode has been observed recently in the HL-3 tokamak. This regime exhibits high energy confinement ( H 98 , y 2 = 0.8 − 1.05 ), and without the occurrence of large ELMs. The EDA H-mode is achieved at a relatively high edge safety factor ( q 95 = 4.5 − 5.7 ) and high plasma triangularity ( δ avg = 0.5 − 0.6 ), where the upper triangularity ( δ U > 0.3 ) is found to be essential. A distinct quasi-coherent mode (QCM) with a frequency of 20 kHz is detected in edge density and temperature fluctuations during the EDA H-mode phase. The QCM has a poloidal wavenumber of k θ ∼ 0.4 cm −1 , a radial wavenumber of k r ∼ 0.2 cm −1 , and propagates in the ion diamagnetic drift direction in the plasma frame. Bispectral analysis shows strong nonlinear interactions between the QCM and broadband turbulence in the pedestal region. By regulating the pedestal particle transport, the QCM limits the growth of the edge plasma pressure gradient, thereby maintaining an ELM-free state in EDA H-mode.
- 13 January 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (2) , 022001
Open AccessExperimental observation and edge characteristics of EDA H-mode on the HL-3 tokamak
The enhanced D α (EDA) H-mode features high energy confinement together with the absence of edge localized modes (ELMs) and impurity accumulation, making it highly attractive for fusion reactors. The EDA H-mode has been observed recently in the HL-3 tokamak. This regime exhibits high energy confinement ( H 98 , y 2 = 0.8 − 1.05 ), and without the occurrence of large ELMs. The EDA H-mode is achieved at a relatively high edge safety factor ( q 95 = 4.5 − 5.7 ) and high plasma triangularity ( δ avg = 0.5 − 0.6 ), where the upper triangularity ( δ U > 0.3 ) is found to be essential. A distinct quasi-coherent mode (QCM) with a frequency of 20 kHz is detected in edge density and temperature fluctuations during the EDA H-mode phase. The QCM has a poloidal wavenumber of k θ ∼ 0.4 cm −1 , a radial wavenumber of k r ∼ 0.2 cm −1 , and propagates in the ion diamagnetic drift direction in the plasma frame. Bispectral analysis shows strong nonlinear interactions between the QCM and broadband turbulence in the pedestal region. By regulating the pedestal particle transport, the QCM limits the growth of the edge plasma pressure gradient, thereby maintaining an ELM-free state in EDA H-mode.
- Open Access
- 12 December 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (1) , 016054
First experimental observation of QH-mode with EHOs on the HL-3 tokamak
The quiescent H-mode (QH-mode), free of edge localized mode (ELM), is a promising operational regime for future fusion devices due to its low collisionality and high confinement performance. In this study, we report on the first experimental observation of QH-mode with edge harmonic oscillations (EHOs) on the HL-3 tokamak. The equilibrium point was found to be near but below the kink/peeling instability boundary. The core magnetohydrodynamic modes became weak during the EHO phase, indicating a significant change in the plasma stability. The fundamental mode of the EHOs had a toroidal mode number of n = 1 and rotated in the ion diamagnetic drift direction, while its harmonics rotated in the electron diamagnetic drift direction. The appearance and disappearance of EHOs were linked to critical values of the radial electric field ( E r ) minimum and E r -curvature ( E r ′ ′ ). The results suggest that E r ′ ′ is the primary driver of EHOs, rather than E r -shear ( E r ′ ). Furthermore, significant reductions in divertor particle and heat flux were observed during the EHO phase compared to ELMy and ELM-free stages without EHOs, indicating the potential for achieving high confinement alongside mitigated divertor loads on HL-3. This study provides valuable insights into the physical understanding of QH-mode with EHOs and its potential role in achieving sustainable fusion energy.
- 12 December 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (1) , 016054
Open AccessFirst experimental observation of QH-mode with EHOs on the HL-3 tokamak
The quiescent H-mode (QH-mode), free of edge localized mode (ELM), is a promising operational regime for future fusion devices due to its low collisionality and high confinement performance. In this study, we report on the first experimental observation of QH-mode with edge harmonic oscillations (EHOs) on the HL-3 tokamak. The equilibrium point was found to be near but below the kink/peeling instability boundary. The core magnetohydrodynamic modes became weak during the EHO phase, indicating a significant change in the plasma stability. The fundamental mode of the EHOs had a toroidal mode number of n = 1 and rotated in the ion diamagnetic drift direction, while its harmonics rotated in the electron diamagnetic drift direction. The appearance and disappearance of EHOs were linked to critical values of the radial electric field ( E r ) minimum and E r -curvature ( E r ′ ′ ). The results suggest that E r ′ ′ is the primary driver of EHOs, rather than E r -shear ( E r ′ ). Furthermore, significant reductions in divertor particle and heat flux were observed during the EHO phase compared to ELMy and ELM-free stages without EHOs, indicating the potential for achieving high confinement alongside mitigated divertor loads on HL-3. This study provides valuable insights into the physical understanding of QH-mode with EHOs and its potential role in achieving sustainable fusion energy.
- 8 September 2025
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 67 (9) , 095012
Simulation study of the impacts of the parallel electron response and the Hall effect on the edge-localized mode for HL-3
In this paper, we investigate the impact of the parallel electron response and the Hall effect on edge-localized mode (ELM) crashes using the BOUT++ three-field model applied to a 1 MA H-mode discharge on HL-3. A scan of the edge safety factor q and magnetic shear s shows that the ratio HD of the Hall scaling factor to the dynamo scaling factor exceeds 0.3, indicating that the Hall effect at the pedestal cannot be neglected in HL-3. Simulations reveal that the drift-Alfvén wave (DAW) instability, driven by the parallel electron response, enhances the linear growth rate and hinders turbulence propagating to the inner part of the pedestal and the scrape-off layer, thereby reducing the ELM size. Impacts of E r shear on the DAW instability are studied by modulating the shear flow. Both co-directional (shear flow in the same direction as the ion diamagnetic drift) and counter-directional (shear flow in a different direction from the ion diamagnetic drift) flows do not alter DAW destabilization, but they weaken its suppression of turbulence transport and reduce the inward shift of the crash location. Compared to counter-flow, the DAW instability can lead to premature termination of the ELM crash and the suppressive effect of DAW instability on the ELM crash is significantly reduced when considering co-flow.
- 8 September 2025
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 67 (9) , 095012
Simulation study of the impacts of the parallel electron response and the Hall effect on the edge-localized mode for HL-3
In this paper, we investigate the impact of the parallel electron response and the Hall effect on edge-localized mode (ELM) crashes using the BOUT++ three-field model applied to a 1 MA H-mode discharge on HL-3. A scan of the edge safety factor q and magnetic shear s shows that the ratio HD of the Hall scaling factor to the dynamo scaling factor exceeds 0.3, indicating that the Hall effect at the pedestal cannot be neglected in HL-3. Simulations reveal that the drift-Alfvén wave (DAW) instability, driven by the parallel electron response, enhances the linear growth rate and hinders turbulence propagating to the inner part of the pedestal and the scrape-off layer, thereby reducing the ELM size. Impacts of E r shear on the DAW instability are studied by modulating the shear flow. Both co-directional (shear flow in the same direction as the ion diamagnetic drift) and counter-directional (shear flow in a different direction from the ion diamagnetic drift) flows do not alter DAW destabilization, but they weaken its suppression of turbulence transport and reduce the inward shift of the crash location. Compared to counter-flow, the DAW instability can lead to premature termination of the ELM crash and the suppressive effect of DAW instability on the ELM crash is significantly reduced when considering co-flow.
- Open Access
- 4 August 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (9) , 096019
Impact of lower hybrid wave injection on edge localized modes in the HL-3 tokamak
Experiments of edge localized modes (ELMs) control with lower hybrid wave (LHW) injection were carried out in the newly operation HL-3 tokamak for the first time, and the experimental results demonstrated that ELMs could be effectively suppressed by LHW injection. During the process of ELMs control with LHW injection, the heat load on the divertor target plate was significantly reduced. Simultaneously, the plasma confinement performance was improved, accompanied by a decrease in both resistivity and collisionality. Moreover, the corresponding simulations of the Peeling-Ballooning mode with BOUT++ code revealed a substantial decrease in both the linear growth rate and the pedestal nonlinear energy loss rate. Further analysis of the LHW injection simulation by GENRAY code and the DBS measurements indicated that LHW injection did not directly affect the ELM behavior. Instead, it enhanced the particle transport within the pedestal region by intensifying edge electrostatic turbulences, leading to a wider and flatter pedestal pressure profile, ultimately suppressing ELMs. The experiments and simulations carried out in the HL-3 tokamak for the first time significantly contribute to a more profound and comprehensive understanding of the physical mechanisms of ELMs control with LHW injection.
- 4 August 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (9) , 096019
Open AccessImpact of lower hybrid wave injection on edge localized modes in the HL-3 tokamak
Experiments of edge localized modes (ELMs) control with lower hybrid wave (LHW) injection were carried out in the newly operation HL-3 tokamak for the first time, and the experimental results demonstrated that ELMs could be effectively suppressed by LHW injection. During the process of ELMs control with LHW injection, the heat load on the divertor target plate was significantly reduced. Simultaneously, the plasma confinement performance was improved, accompanied by a decrease in both resistivity and collisionality. Moreover, the corresponding simulations of the Peeling-Ballooning mode with BOUT++ code revealed a substantial decrease in both the linear growth rate and the pedestal nonlinear energy loss rate. Further analysis of the LHW injection simulation by GENRAY code and the DBS measurements indicated that LHW injection did not directly affect the ELM behavior. Instead, it enhanced the particle transport within the pedestal region by intensifying edge electrostatic turbulences, leading to a wider and flatter pedestal pressure profile, ultimately suppressing ELMs. The experiments and simulations carried out in the HL-3 tokamak for the first time significantly contribute to a more profound and comprehensive understanding of the physical mechanisms of ELMs control with LHW injection.
- Open Access
- 3 February 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (3) , 035602
Simulations of ELM characteristics in HL-3 high-confinement mode
A systematic study of the edge localized mode (ELM) characteristics in HL-3 is performed based on a set of scenarios constructed by Kinetic EFIT workflow. The edge localized instabilities in tokamaks equilibria (ELITE) code (an eigenvalue solver) is used to calculate the peeling-ballooning (P-B) instability diagram. It is shown that the reference equilibrium of HL-3 is marginally stable near the peeling boundary. Non-ideal and non-linear simulations are then carried out by 3-field model implemented in BOUT++ code. For ideal case, the linear results from BOUT++ modelling agree well with that calculated by ELITE code. Based on BOUT++ modelling, it is found that diamagnetic drift can significantly stabilize the ELMs. But the effect of the resistivity on ELMs is more complicated, which depends on the transition of the mode structure. Furthermore, non-linear simulations show that the resistivity might trigger the ELMs before the ideal P-B boundary is reached.
- 3 February 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (3) , 035602
Open AccessSimulations of ELM characteristics in HL-3 high-confinement mode
A systematic study of the edge localized mode (ELM) characteristics in HL-3 is performed based on a set of scenarios constructed by Kinetic EFIT workflow. The edge localized instabilities in tokamaks equilibria (ELITE) code (an eigenvalue solver) is used to calculate the peeling-ballooning (P-B) instability diagram. It is shown that the reference equilibrium of HL-3 is marginally stable near the peeling boundary. Non-ideal and non-linear simulations are then carried out by 3-field model implemented in BOUT++ code. For ideal case, the linear results from BOUT++ modelling agree well with that calculated by ELITE code. Based on BOUT++ modelling, it is found that diamagnetic drift can significantly stabilize the ELMs. But the effect of the resistivity on ELMs is more complicated, which depends on the transition of the mode structure. Furthermore, non-linear simulations show that the resistivity might trigger the ELMs before the ideal P-B boundary is reached.