Patrick Damacet
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Patrick Damacet has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Katherine A. Mirica
Dartmouth College
8 shared publications - Elissa O. Shehayeb
Department of Chemistry, Burke Laboratory, Dartmouth College, Hanover, NH, USA
5 shared publications - Giovanni Barcaro
CNR‐IPCF Institute for Chemical and Physical Processes Area della Ricerca Pisa Italy
2 shared publications - Mohamad Hmadeh
Department of Chemistry, American University of Beirut, Beirut, Lebanon
2 shared publications - Susanna Monti
CNR-ICCOM, Institute of Chemistry of Organometallic Compounds, Pisa, Italy
2 shared publications Abdelaziz Gouda
Department of Chemistry, University of Toronto, 80 St. George Street, M5S 3H6 Toronto, Canada
1 shared publication
Latest Publications
- Open Access
- 9 November 2026
- Published by Royal Society of Chemistry (RSC) in Materials Chemistry Frontiers
- Vol. 10 (22) , 4143-4222
Multifunctional reticular framework materials for simultaneous detection and adsorption of water contaminants
This review highlights the design and application of multifunctional reticular framework materials, including MOFs, COFs, and HOFs for the simultaneous capture and detection of a diverse range of contaminants in water.
- 9 November 2026
- Published by Royal Society of Chemistry (RSC) in Materials Chemistry Frontiers
- Vol. 10 (22) , 4143-4222
Open AccessMultifunctional reticular framework materials for simultaneous detection and adsorption of water contaminants
This review highlights the design and application of multifunctional reticular framework materials, including MOFs, COFs, and HOFs for the simultaneous capture and detection of a diverse range of contaminants in water.
- Open Access
- 29 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Highly modular conductive threads for multiplexed detection of hazardous gases
Wearable electronics have progressed from rigid circuit boards to fibertronics, where electronic functionality is integrated directly onto textile threads, advancing their utility. However, on-body chemical hazard monitoring remains limited by the poor sensitivity, selectivity, and durability of existing fiber-based sensors. Here, we report a modular, layer-by-layer strategy to fabricate robust, crystalline, conformal, and conductive coatings of stimuli-responsive Ni-, Cu-, and Zn-coordinated hexahydroxy- or hexaimino-triphenylene metal-organic frameworks (MOFs) on cotton threads. A four-component chemiresistive array of the threads detects and differentiates five toxic gases-H2S, SO2, NO, NH3, and CO-with theoretical detection limits of 43, 60, 6, 65, and 417 ppb, respectively, all below Occupational Safety and Health Administration permissible exposure limits. When embedded into personal protective equipment, the sensor patch retains functionality even under elevated humidity and after repeated washing. This modular platform technology advances the development of chemically-responsive smart garments towards multiplexed environmental monitoring of toxic chemicals.
- 29 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessHighly modular conductive threads for multiplexed detection of hazardous gases
Wearable electronics have progressed from rigid circuit boards to fibertronics, where electronic functionality is integrated directly onto textile threads, advancing their utility. However, on-body chemical hazard monitoring remains limited by the poor sensitivity, selectivity, and durability of existing fiber-based sensors. Here, we report a modular, layer-by-layer strategy to fabricate robust, crystalline, conformal, and conductive coatings of stimuli-responsive Ni-, Cu-, and Zn-coordinated hexahydroxy- or hexaimino-triphenylene metal-organic frameworks (MOFs) on cotton threads. A four-component chemiresistive array of the threads detects and differentiates five toxic gases-H2S, SO2, NO, NH3, and CO-with theoretical detection limits of 43, 60, 6, 65, and 417 ppb, respectively, all below Occupational Safety and Health Administration permissible exposure limits. When embedded into personal protective equipment, the sensor patch retains functionality even under elevated humidity and after repeated washing. This modular platform technology advances the development of chemically-responsive smart garments towards multiplexed environmental monitoring of toxic chemicals.
- Open Access
- 22 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (1) , 1218-1230
Redox-Active Metal–Organic Framework Nanocrystals for the Simultaneous Adsorption, Detection, and Detoxification of Heavy Metal Cations
The widespread contamination of water by heavy metals requires materials capable of efficient capture, in situ detoxification, and real-time monitoring. This work examines a series of redox-active metal-organic frameworks (MOFs) constructed from hexahydroxytriphenylene (HHTP) ligands coordinated to cobalt, nickel, and copper (Co-HHTP, Ni-HHTP, and Cu-HHTP), revealing how framework architecture and metal coordination environment dictate adsorption capacity, redox activity, and detection performance toward cadmium (Cd2+), mercury (Hg2+), and lead (Pb2+) ions. Among the series, Co-HHTP exhibits the highest uptake capacities of 169, 733, and 554 mg g-1 for Cd2+, Hg2+, and Pb2+, respectively, attributed to its trigonal stacking and intercalated layers that expose labile water-capped metal sites. These sites facilitate electron transfer, enabling a redox-active capture pathway in which heavy metal cations are partially reduced, with concurrent oxidation of the HHTP ligand. In contrast, Cu-HHTP, with an eclipsed stacking arrangement and limited redox complementarity to the heavy metal ions examined, remains redox-inert and exhibits the lowest performance. Deposition of Co-HHTP onto cotton, silk, and polyester yields MOF@textile composites that retain adsorption efficiency and enable rapid detection of heavy metals at low-ppm concentrations. These findings establish a structure-function correlation, emphasizing how stacking configuration, metal accessibility, and redox-active ligands collectively govern multimechanistic heavy metal remediation.
- 22 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (1) , 1218-1230
Open AccessRedox-Active Metal–Organic Framework Nanocrystals for the Simultaneous Adsorption, Detection, and Detoxification of Heavy Metal Cations
The widespread contamination of water by heavy metals requires materials capable of efficient capture, in situ detoxification, and real-time monitoring. This work examines a series of redox-active metal-organic frameworks (MOFs) constructed from hexahydroxytriphenylene (HHTP) ligands coordinated to cobalt, nickel, and copper (Co-HHTP, Ni-HHTP, and Cu-HHTP), revealing how framework architecture and metal coordination environment dictate adsorption capacity, redox activity, and detection performance toward cadmium (Cd2+), mercury (Hg2+), and lead (Pb2+) ions. Among the series, Co-HHTP exhibits the highest uptake capacities of 169, 733, and 554 mg g-1 for Cd2+, Hg2+, and Pb2+, respectively, attributed to its trigonal stacking and intercalated layers that expose labile water-capped metal sites. These sites facilitate electron transfer, enabling a redox-active capture pathway in which heavy metal cations are partially reduced, with concurrent oxidation of the HHTP ligand. In contrast, Cu-HHTP, with an eclipsed stacking arrangement and limited redox complementarity to the heavy metal ions examined, remains redox-inert and exhibits the lowest performance. Deposition of Co-HHTP onto cotton, silk, and polyester yields MOF@textile composites that retain adsorption efficiency and enable rapid detection of heavy metals at low-ppm concentrations. These findings establish a structure-function correlation, emphasizing how stacking configuration, metal accessibility, and redox-active ligands collectively govern multimechanistic heavy metal remediation.
- Open Access
- 6 October 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (10) , 7787-7798
Metal–Organic Framework-Based Chemiresistive Array Paired with Machine Learning Algorithms for the Detection and Differentiation of Toxic Gases
The development of low-power, sensitive, and selective gas sensors capable of detecting and differentiating toxic gases is pivotal for safety and environmental monitoring. This paper describes a chemiresistive sensor array comprising a series of three conductive hexahydroxytriphenylene-based metal-organic frameworks (MOFs) (M3(HHTP)2 (M = Ni, Cu, Zn)) capable of detecting and differentiating parts-per-million (ppm) levels of carbon monoxide (CO), ammonia (NH3), sulfur dioxide (SO2), hydrogen sulfide (H2S), and nitric oxide (NO), as well as binary mixtures of SO2 and H2S in dry nitrogen at room temperature. This capability arises from variations in the identity of the linking metal and the framework packing pattern across the materials in the array. To visualize the response pattern of the sensor array and map it to a predicted gas composition, principal component analysis and random forest classification are employed. Both machine learning techniques confirm the ability to discriminate CO, NH3, SO2, H2S, and NO analytes as well as binary SO2/H2S mixtures at ppm concentrations using the response of the array. Moreover, a feature importance method applied to the classifier assigns importance scores to each sensor in the array to quantify the impact of individual materials on analyte discrimination. Spectroscopic investigations provide insight into how the structural features of the MOFs influence sensing performance and ascertain material-analyte interactions governing sensing selectivity for SO2/H2S binary mixtures.
- 6 October 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (10) , 7787-7798
Open AccessMetal–Organic Framework-Based Chemiresistive Array Paired with Machine Learning Algorithms for the Detection and Differentiation of Toxic Gases
The development of low-power, sensitive, and selective gas sensors capable of detecting and differentiating toxic gases is pivotal for safety and environmental monitoring. This paper describes a chemiresistive sensor array comprising a series of three conductive hexahydroxytriphenylene-based metal-organic frameworks (MOFs) (M3(HHTP)2 (M = Ni, Cu, Zn)) capable of detecting and differentiating parts-per-million (ppm) levels of carbon monoxide (CO), ammonia (NH3), sulfur dioxide (SO2), hydrogen sulfide (H2S), and nitric oxide (NO), as well as binary mixtures of SO2 and H2S in dry nitrogen at room temperature. This capability arises from variations in the identity of the linking metal and the framework packing pattern across the materials in the array. To visualize the response pattern of the sensor array and map it to a predicted gas composition, principal component analysis and random forest classification are employed. Both machine learning techniques confirm the ability to discriminate CO, NH3, SO2, H2S, and NO analytes as well as binary SO2/H2S mixtures at ppm concentrations using the response of the array. Moreover, a feature importance method applied to the classifier assigns importance scores to each sensor in the array to quantify the impact of individual materials on analyte discrimination. Spectroscopic investigations provide insight into how the structural features of the MOFs influence sensing performance and ascertain material-analyte interactions governing sensing selectivity for SO2/H2S binary mixtures.
- Open Access
- 28 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (31) , 27561-27575
Electronic Textiles Based on Conductive Metal–Organic Frameworks as Scavengers and Sensors of Toxic Oxyanions from Water
Water contamination by toxic oxyanions poses a severe threat to ecosystems and human health. While various adsorbents have been developed for oxyanion sequestration, designing a single material that simultaneously achieves high selectivity, rapid adsorption kinetics, and real-time sensing capabilities remains a challenge. This study explores the first use of layered, conductive metal-organic frameworks (cMOFs) based on hexahydroxy- and hexaimino-triphenylene (HHTP and HITP) cores coordinated with nickel and copper for the dual sensing and filtration of oxyanions from water. Systematic investigations of Ni3(HHTP)2, Cu3(HHTP)2, Ni3(HITP)2, and Cu3(HITP)2 reveal that Ni3(HITP)2 exhibits unprecedented adsorption capacities, capturing up to 827 mg of MnO4- and 497 mg of Cr2O72- per gram of MOF, while filtering up to 99% of these oxyanions within 10 min of exposure. Ni3(HITP)2 also demonstrates high applicability in real-world scenarios, maintaining a remarkable adsorption performance across various water matrices, pH conditions, and competing anion interferences. Spectroscopic and computational investigations reveal a multimechanistic scavenging process involving chemisorption, physisorption, and redox reactions. Grafting Ni3(HITP)2 onto cotton textiles via a layer-by-layer approach yields mechanically robust, easy to handle, and flexible electronic textile capable of filtering oxyanions for up to 32 cycles without performance loss, while allowing their detection with high sensitivity and low detection limits reaching 2.2 ppm for MnO4- and 6 ppm for Cr2O72-. Taken together, these findings pave the way for MOF-based next-generation water treatment technologies that integrate efficient filtration and real-time sensing capabilities.
- 28 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (31) , 27561-27575
Open AccessElectronic Textiles Based on Conductive Metal–Organic Frameworks as Scavengers and Sensors of Toxic Oxyanions from Water
Water contamination by toxic oxyanions poses a severe threat to ecosystems and human health. While various adsorbents have been developed for oxyanion sequestration, designing a single material that simultaneously achieves high selectivity, rapid adsorption kinetics, and real-time sensing capabilities remains a challenge. This study explores the first use of layered, conductive metal-organic frameworks (cMOFs) based on hexahydroxy- and hexaimino-triphenylene (HHTP and HITP) cores coordinated with nickel and copper for the dual sensing and filtration of oxyanions from water. Systematic investigations of Ni3(HHTP)2, Cu3(HHTP)2, Ni3(HITP)2, and Cu3(HITP)2 reveal that Ni3(HITP)2 exhibits unprecedented adsorption capacities, capturing up to 827 mg of MnO4- and 497 mg of Cr2O72- per gram of MOF, while filtering up to 99% of these oxyanions within 10 min of exposure. Ni3(HITP)2 also demonstrates high applicability in real-world scenarios, maintaining a remarkable adsorption performance across various water matrices, pH conditions, and competing anion interferences. Spectroscopic and computational investigations reveal a multimechanistic scavenging process involving chemisorption, physisorption, and redox reactions. Grafting Ni3(HITP)2 onto cotton textiles via a layer-by-layer approach yields mechanically robust, easy to handle, and flexible electronic textile capable of filtering oxyanions for up to 32 cycles without performance loss, while allowing their detection with high sensitivity and low detection limits reaching 2.2 ppm for MnO4- and 6 ppm for Cr2O72-. Taken together, these findings pave the way for MOF-based next-generation water treatment technologies that integrate efficient filtration and real-time sensing capabilities.
- Open Access
- 17 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (8) , 12425-12439
Smart Textile: Electrohydrodynamic Jet Printing of Ionic Liquid-Functionalized Cu3(HHTP)2 Metal–Organic Frameworks for Gas-Sensing Applications
This study presents the development and characterization of a smart textile gas sensor based on the integration of ionic liquid (IL)-functionalized Cu3(HHTP)2 metal-organic frameworks (MOFs), using electrohydrodynamic jet (e-jet) printing. The sensor was designed for the detection of nitric oxide (NO) gas, a critical target in various environmental and safety applications. Cu3(HHTP)2 MOFs were synthesized and subsequently functionalized with 1-Ethyl-3-methylimidazolium trifluoromethanesulfonate (EMIM+ Otf-) ionic liquid to enhance their chemiresistive performance toward NO gas. The functionalized MOF was then e-jet printed onto electrospun polylactic acid (PLA) substrates to fabricate smart textile sensors. The IL-functionalized Cu3(HHTP)2 sensors demonstrated a 582× increase in conductivity compared to previously reported MOF-based sensors. Additionally, IL functionalization enhanced sensor sensitivity, with a response increasing from less than 5% in pristine MOF@PLA sensors to approximately 570% at 100 ppm of NO gas. Performance was systematically evaluated across NO concentrations ranging from 5 to 300 ppm, achieving a theoretical limit of detection of 3.7 ppm. The sensors exhibited partial reversibility and retained functionality over extended periods and under humid conditions. Comprehensive analyses using SEM, EDX, FTIR, and XRD were performed to assess the crystallinity of MOF deposits and elucidate the sensing mechanism. These findings highlight the potential of e-jet printing of IL-functionalized MOFs for the development of advanced, flexible gas sensors with applications in both civilian and military settings and implications for personal protective wearable technologies.
- 17 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (8) , 12425-12439
Open AccessSmart Textile: Electrohydrodynamic Jet Printing of Ionic Liquid-Functionalized Cu3(HHTP)2 Metal–Organic Frameworks for Gas-Sensing Applications
This study presents the development and characterization of a smart textile gas sensor based on the integration of ionic liquid (IL)-functionalized Cu3(HHTP)2 metal-organic frameworks (MOFs), using electrohydrodynamic jet (e-jet) printing. The sensor was designed for the detection of nitric oxide (NO) gas, a critical target in various environmental and safety applications. Cu3(HHTP)2 MOFs were synthesized and subsequently functionalized with 1-Ethyl-3-methylimidazolium trifluoromethanesulfonate (EMIM+ Otf-) ionic liquid to enhance their chemiresistive performance toward NO gas. The functionalized MOF was then e-jet printed onto electrospun polylactic acid (PLA) substrates to fabricate smart textile sensors. The IL-functionalized Cu3(HHTP)2 sensors demonstrated a 582× increase in conductivity compared to previously reported MOF-based sensors. Additionally, IL functionalization enhanced sensor sensitivity, with a response increasing from less than 5% in pristine MOF@PLA sensors to approximately 570% at 100 ppm of NO gas. Performance was systematically evaluated across NO concentrations ranging from 5 to 300 ppm, achieving a theoretical limit of detection of 3.7 ppm. The sensors exhibited partial reversibility and retained functionality over extended periods and under humid conditions. Comprehensive analyses using SEM, EDX, FTIR, and XRD were performed to assess the crystallinity of MOF deposits and elucidate the sensing mechanism. These findings highlight the potential of e-jet printing of IL-functionalized MOFs for the development of advanced, flexible gas sensors with applications in both civilian and military settings and implications for personal protective wearable technologies.
- 3 January 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (2) , 1584-1594
Controlling the Spatiotemporal Self-Organization of Stimuli-Responsive Nanocrystals under Out-of-Equilibrium Conditions
Self-organization under out-of-equilibrium conditions is ubiquitous in natural systems for the generation of hierarchical solid-state patterns of complex structures with intricate properties. Efforts in applying this strategy to synthetic materials that mimic biological function have resulted in remarkable demonstrations of programmable self-healing and adaptive materials. However, the extension of these efforts to multifunctional stimuli-responsive solid-state materials across defined spatial distributions remains an unrealized technological opportunity. This paper describes the use of a nonequilibrium reaction-diffusion process to achieve the synthesis of a multifunctional stimuli-responsive electrically conductive metal-organic framework (cMOF) in a gelled medium with control over particle size and spatial periodicity on a macroscopic scale. Upon integration into chemiresistive devices, the resulting cMOF particles exhibit a size-dependent response toward hydrogen sulfide gas, as determined by their distinct surface-to-volume ratio, porosity, unique synthesis methodology, and unusual microcrystallite morphology compared to their counterparts obtained through bulk solution phase synthesis. Taken altogether, these achievements pave the way toward gaining access to functional nanomaterials with well-defined chemical composition, dimensions, and precisely tailored functions using far-from-equilibrium approaches.
- 3 January 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (2) , 1584-1594
Controlling the Spatiotemporal Self-Organization of Stimuli-Responsive Nanocrystals under Out-of-Equilibrium Conditions
Self-organization under out-of-equilibrium conditions is ubiquitous in natural systems for the generation of hierarchical solid-state patterns of complex structures with intricate properties. Efforts in applying this strategy to synthetic materials that mimic biological function have resulted in remarkable demonstrations of programmable self-healing and adaptive materials. However, the extension of these efforts to multifunctional stimuli-responsive solid-state materials across defined spatial distributions remains an unrealized technological opportunity. This paper describes the use of a nonequilibrium reaction-diffusion process to achieve the synthesis of a multifunctional stimuli-responsive electrically conductive metal-organic framework (cMOF) in a gelled medium with control over particle size and spatial periodicity on a macroscopic scale. Upon integration into chemiresistive devices, the resulting cMOF particles exhibit a size-dependent response toward hydrogen sulfide gas, as determined by their distinct surface-to-volume ratio, porosity, unique synthesis methodology, and unusual microcrystallite morphology compared to their counterparts obtained through bulk solution phase synthesis. Taken altogether, these achievements pave the way toward gaining access to functional nanomaterials with well-defined chemical composition, dimensions, and precisely tailored functions using far-from-equilibrium approaches.
- 24 December 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (1) , 1383-1395
Mechanistic Insight into the Formation and Deposition of Conductive, Layered Metal–Organic Framework Nanocrystals
This paper describes the use of the layered conductive metal–organic framework (MOF) (nickel)3-(hexahydroxytriphenylene)2 [Ni3(HHTP)2] as a model system for understanding the process of self-assembly within this class of materials. We confirm and quantify experimentally the role of the oxidant in the synthetic process. Monitoring the deposition of Ni3(HHTP)2 with in situ infrared spectroscopy revealed that MOF formation is characterized by an initial induction period, followed by linear growth with respect to time. The presence and identity of oxidizing agents is critical for the coordination-driven self-assembly of these materials and impacts both the length of the induction period and the observed rate of MOF growth. A large excess of hydrogen peroxide results in a 2× increase in the observed deposition rate (9.6 ± 6.8 × 10–4 vs 5.0 ± 2.8 × 10–4 min–1) over standard reaction conditions, but leads to the formation of large, irregularly shaped particles. Slower deposition rates in the presence of oxygen favor the formation of uniformly sized nanorods (98 ± 38 × 25 ± 6 nm). These quantitative insights into the mechanism of HHTP-based MOF formation provide valuable information about the fundamental aspects of coordination and polymerization that are critical for nanoscale crystal engineering of structure–property relationships in this class of materials.
- 24 December 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (1) , 1383-1395
Mechanistic Insight into the Formation and Deposition of Conductive, Layered Metal–Organic Framework Nanocrystals
This paper describes the use of the layered conductive metal–organic framework (MOF) (nickel)3-(hexahydroxytriphenylene)2 [Ni3(HHTP)2] as a model system for understanding the process of self-assembly within this class of materials. We confirm and quantify experimentally the role of the oxidant in the synthetic process. Monitoring the deposition of Ni3(HHTP)2 with in situ infrared spectroscopy revealed that MOF formation is characterized by an initial induction period, followed by linear growth with respect to time. The presence and identity of oxidizing agents is critical for the coordination-driven self-assembly of these materials and impacts both the length of the induction period and the observed rate of MOF growth. A large excess of hydrogen peroxide results in a 2× increase in the observed deposition rate (9.6 ± 6.8 × 10–4 vs 5.0 ± 2.8 × 10–4 min–1) over standard reaction conditions, but leads to the formation of large, irregularly shaped particles. Slower deposition rates in the presence of oxygen favor the formation of uniformly sized nanorods (98 ± 38 × 25 ± 6 nm). These quantitative insights into the mechanism of HHTP-based MOF formation provide valuable information about the fundamental aspects of coordination and polymerization that are critical for nanoscale crystal engineering of structure–property relationships in this class of materials.
- Open Access
- 12 February 2024
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 15 (11) , 1112-1122
Functional design of stimuli-responsive poly(phthalaldehyde)-based adhesives: depolymerization kinetics and mechanical strength management through plasticizer addition
Through a strategic polymer engineering design, this paper shows that self-immolative poly(phthalaldehyde) (PPA) can be employed as a responsive debonding-on-demand adhesive for the detection of fluorides and acids in liquid and solid states.
- 12 February 2024
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 15 (11) , 1112-1122
Open AccessFunctional design of stimuli-responsive poly(phthalaldehyde)-based adhesives: depolymerization kinetics and mechanical strength management through plasticizer addition
Through a strategic polymer engineering design, this paper shows that self-immolative poly(phthalaldehyde) (PPA) can be employed as a responsive debonding-on-demand adhesive for the detection of fluorides and acids in liquid and solid states.
- Open Access
- 17 January 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (12) , 17741-17750
Controlled Growth of Highly Defected Zirconium–Metal–Organic Frameworks via a Reaction–Diffusion System for Water Remediation
The relentless growth of metal-organic framework (MOF) chemistry is paralleled by the persistent urge to control the MOFs physical and chemical properties. While this control is mostly achieved by solvothermal syntheses, room temperature procedures stand out as more convenient and sustainable pathways for the production of MOF materials. Herein, a novel approach to control the crystal size and defect numbers of a dihydroxy-functionalized zirconium-based metal-organic framework (UiO-66(OH)2) at room temperature is reported. Through a reaction-diffusion method in a 1D system, zirconium salt was diffused into an agar gel matrix containing the organic linker to form nanocrystals of UiO-66(OH)2 with tailored structural features that include crystal size distribution, surface area, and defect number. By variation of the synthesis parameters of the system, hierarchical MOF nanocrystals with an average size ranging from 30 nm up to 270 nm and surface areas between 201 and 500 m2 g-1 were obtained in a one-pot synthetic route. To stress the importance of crystal size, morphology, and structural defects on the adsorption properties of UiO-66(OH)2, the adsorption capacity of the MOF toward methylene blue dye was tested with the largest and most defected crystals achieving the best performance of 202 mg/g. The distinctive structural characteristics including the hierarchical micromesoporous frameworks, the nanosized particles, and the highly defective crystals obtained by our synthesis procedure are deemed challenging through the conventional synthesis methods. This work paves the way for engineering MOF crystals with tunable physical and chemical properties, using a green synthesis procedure, for their advantageous use in many desirable applications.
- 17 January 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (12) , 17741-17750
Open AccessControlled Growth of Highly Defected Zirconium–Metal–Organic Frameworks via a Reaction–Diffusion System for Water Remediation
The relentless growth of metal-organic framework (MOF) chemistry is paralleled by the persistent urge to control the MOFs physical and chemical properties. While this control is mostly achieved by solvothermal syntheses, room temperature procedures stand out as more convenient and sustainable pathways for the production of MOF materials. Herein, a novel approach to control the crystal size and defect numbers of a dihydroxy-functionalized zirconium-based metal-organic framework (UiO-66(OH)2) at room temperature is reported. Through a reaction-diffusion method in a 1D system, zirconium salt was diffused into an agar gel matrix containing the organic linker to form nanocrystals of UiO-66(OH)2 with tailored structural features that include crystal size distribution, surface area, and defect number. By variation of the synthesis parameters of the system, hierarchical MOF nanocrystals with an average size ranging from 30 nm up to 270 nm and surface areas between 201 and 500 m2 g-1 were obtained in a one-pot synthetic route. To stress the importance of crystal size, morphology, and structural defects on the adsorption properties of UiO-66(OH)2, the adsorption capacity of the MOF toward methylene blue dye was tested with the largest and most defected crystals achieving the best performance of 202 mg/g. The distinctive structural characteristics including the hierarchical micromesoporous frameworks, the nanosized particles, and the highly defective crystals obtained by our synthesis procedure are deemed challenging through the conventional synthesis methods. This work paves the way for engineering MOF crystals with tunable physical and chemical properties, using a green synthesis procedure, for their advantageous use in many desirable applications.