Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Qiufeng Yan has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Advances in Linear Ultrasonic Motors

    by Zhiling Liu, Qiufeng Yan, Qingyu Liu

    Linear ultrasonic motors (LUSMs) occupy an important position in the field of high-precision actuation due to their advantages of simple structure, high control accuracy and direct linear motion generation. This review first classifies LUSMs according to wave modes into traveling wave linear ultrasonic motors (TWLUSMs) and standing wave linear ultrasonic motors (SWLUSMs). Among them, TWLUSMs include the straight beam type and the annular beam type, while SWLUSMs consist of the single-foot type and the multi-foot type. In addition, the working principles of TWLUSMs and SWLUSMs are elaborated. The structural characteristics and performance parameters of different types of ultrasonic motors (USMs) are sorted out, and the analysis shows that SWLUSMs are significantly superior to TWLUSMs in terms of output speed and output force. This review summarizes the application status of LUSMs in fields such as biomedicine, deep-sea exploration, aerospace and precision manufacturing, and finally outlines the development trends of LUSMs from the aspects of miniaturization and lightweighting, extreme environment adaptability and intelligent upgrade. This review provides a comprehensive reference for the structural design, performance improvement and application expansion of LUSMs.

  • Open Access

    Research on Valveless Piezoelectric Pump Based on Coriolis Effect

    by Qiufeng Yan, Zhiling Liu, Wanting Sun, Mengyao Jiang

    In previous studies, a valveless piezoelectric pump with arc-shaped tubes (VPPAST) based on the Coriolis Effect was proposed. To promote the application of VPPAST in the field of navigation and guidance, it is vital to further explore the influences of the layout and structural parameters of arc-shaped tubes on the flow rate. Accordingly, in this study, the analysis of flow characteristics of fluid in arc-shaped tubes was conducted, and the velocity difference between the clockwise and counterclockwise flow of the liquid was reduced. Eventually, the flow equations of three layout modes of arc-shaped tubes were established. VPPAST with anomalous-direction arc-shaped tubes, single-arc-shaped tube, and same-direction arc-shaped tubes were produced using 3D printing technology. In addition, the valveless piezoelectric pump with the anomalous-direction arc-shaped tubes (VLPPADA) with different parameter flow tubes were also fabricated. Based on the resultant flow rates of each piezoelectric pump, it was demonstrated that the flow rate of the VLPPADA was the highest under the same driving conditions, and the flow rate can be determined as 1.72 mL/min when the driving voltage was set as 160 V at 14 Hz. It indicated that the pump flow rate of VLPPADA was directly proportional to the base radius and width of the arc-shaped tube.


  • Open Access

    Recent Research on Structural Design, Performance Optimization, and Applications of Piezoelectric Pumps

    by Qiufeng Yan, Zhiling Liu, Le Wang, Wanting Sun, Mengyao Jiang

    With the advantages of simple structure, low power consumption, no electromagnetic interference, and fast response, piezoelectric pumps (PPs) have been widely used in the fields of chip cooling, biomedical applications, chemical applications, and fuel supply applications. In recent decades, scholars have proposed various PPs, and this article reviews the recent research results. In this review, according to the “valve” structure, PPs are divided into valve-less piezoelectric pumps (VLPPs), valve-based piezoelectric pumps (VBPPs), and piezoelectric pumps with valve and valve-less state transitions (PPVVSTs). Firstly, the design methods of typical structures were discussed, and comparisons were made in terms of driving frequency, driving voltage, output pressure, flow rate, structure materials, and pump size. The advantages and disadvantages of VLPPs, VBPPs, and PPVVSTs were analyzed. Then, we compared the driving parameters, output performance, structure materials, and pump size of single-chamber piezoelectric pumps (SCPs) and multi-chamber piezoelectric pumps (MCPs) and analyzed the advantages and disadvantages of SCPs and MCPs. Optimization methods proposed in recent years have been summarized to address the issues of the cavitation phenomenon, the liquid back-flow problem, and low output performance in PPs. Subsequently, the application research of PPs and the distribution of academic achievements were discussed. Finally, this review was summarized, and future research hot spots for PPs were proposed. The main contribution of this review is to provide piezoelectric pump (PP) researchers with a certain understanding of the structural design, optimization methods, practical applications, and research distribution of PPs, which can provide theoretical guidance for future research.


  • Open Access

    Research of piezoelectric pump with a vortex linear valve structure

    by Qiufeng Yan, Wanting Sun

    In this article, a piezoelectric pump with vortex shaped linear valve structure (PPVSLVS) is proposed on the basis of characteristics of flexible materials. Changes in the working state conversion between “valve-based” and “valve-less” of the PPVSLVS can be realized by adjusting driving conditions. The principle of the working state conversion between “valve-based” and “valve-less” of the PPVSLVS is elaborated for the design of the structure of the PPVSLVS. The prototype of the PPVSLVS and the piezoelectric pump with cardiac valve-like structure is fabricated by 3D printing technique, and the corresponding experiments are also conducted. The experimental results demonstrate that the PPVSLVS is ascribed to be a valve-less piezoelectric pump when the driving voltage is less than 140 V, while the PPVSLVS is ascribed to be a valve-based piezoelectric pump when the driving voltage is above 140 V. When the working state of the PPVSLVS is converted from “valve-less” to “valve-based,” the pump flow rate of this pump will be changed from one peak to double peak. Simultaneously, when the driving voltage of the pump is 180 V at 12 Hz, the pump flow rate reaches a maximum value of 44.3 mL/min. Compared with the piezoelectric pump with a cardiac valve-like structure, under the same driving conditions, the pump flow rate of the PPVSLVS is remarkably increased. When the driving frequency is set as 12 and 24 Hz, the average pump flow rate is improved by 107% and 21.3%, respectively. The distance between the free ends of the valve will affect the working states and flow rate of the PPVSLVS. This study contributes to the application of piezoelectric pumps in artificial hearts.


  • Theoretical and experimental research on valve-less piezoelectric pump with arc-shaped tubes

    by Qiufeng Yan, Yongkang Yin, Le Wang, Hongmei Wang, Wanting Sun

    In order to apply a valve-less piezoelectric pump in navigation equipment, this work first revealed a valve-less piezoelectric pump with arc-shaped tubes and then researched the relationship between the main structural parameters of arc-shaped tubes and the output flow rate. According to the velocity difference between clockwise and counterclockwise directions of liquid in circular arc-shaped tubes, the flow characteristics of liquid in circular arc-shaped tubes are analyzed in this paper, and the velocity difference model and flow equation of a piezoelectric pump are established. By using three-dimensional printing technology, five types of prototypes with different parameters were made, and the experimental research was carried out. The results show that at the optimal frequency, the pump output flow is the largest. The output flow is proportional to the driving voltage, the base circle radius, and the cross section area of the pipe. The low-cost and miniaturized navigation equipment made by using the piezoelectric pump has potential application value in unmanned aerial vehicle and intelligent vehicle navigation.


  • Open Access

    Working Mechanisms and Experimental Research of Piezoelectric Pump with a Cardiac Valve-like Structure

    by Jiayue Zhou, Wanting Sun, Jun Fu, Huixia Liu, Hongmei Wang, Qiufeng Yan

    In this study, based on the working principle of the cardiac valve structure that prevents blood from flowing back, a piezoelectric pump with a cardiac valve-like structure (PPCVLS) is designed. The operating principles of cardiac-valve-like structures (CVLSs) are introduced. Furthermore, the closure conditions of the CVLSs on both sides of the flow channel are explored. The principle behind the working-state conversion between “valve-based” and “valve-less” of PPCVLS is also analyzed. A high-speed dynamic microscopic image-analysis system was utilized to observe and verify the working-state conversion between “valve-based” and “valve-less” PPCVLSs. The resonant frequency of the piezoelectric pump was measured by Doppler laser vibrometer, and the optimal working frequency of the piezoelectric vibrator was determined as 22.35 Hz. The prototype piezoelectric pump was fabricated by the 3D printing technique, and the output performance of the piezoelectric pump was also evaluated. The experimental results show that the piezoelectric pump is valve-based when the driving voltage is greater than 140V, and the piezoelectric pump is valve-less when the driving voltage is less than 140 V. Furthermore, the maximum output pressure of the piezoelectric pump was 199 mm H2O when driven by the applied voltage of 220 V at 7 Hz, while the maximum flow rate of the piezoelectric pump was 44.5 mL/min when driven by the applied voltage of 220 V at 11 Hz.


  • Open Access

    Advances in Valveless Piezoelectric Pumps

    by Qiufeng Yan, Yongkang Yin, Wanting Sun, Jun Fu

    Piezoelectric pump design is regarded as a hot research topic in the microfluidic field, and has been applied in liquid cooling, precision machinery and other relevant domains. The valveless piezoelectric pump becomes an important branch of the piezoelectric pump, because it successfully avoids the problem of “pump-lagging of valve” during the valve piezoelectric pump processing. This paper summarizes the development of valveless piezoelectric pumps, and introduces some different configurations of valveless piezoelectric pumps. The structure and material of all kinds of valveless piezoelectric pumps are elaborated in detail, and also the output performance of the pump is evaluated and analyzed with the variations in flow rate and output pressure as reference. By comparing the flow of different types of valveless piezoelectric pumps, the application of valveless piezoelectric pumps is also illustrated. The development tendency of the valveless piezoelectric pump is prospected from the perspective of structure design and machining methods, which is expected to provide novel ideas and guidance for future research.


  • Open Access

    Advances in Piezoelectric Jet and Atomization Devices

    by Qiufeng Yan, Jiahan You, Wanting Sun, Ying Wang, Hongmei Wang, Lei Zhang

    In recent years, the piezoelectric jet and atomization devices have exhibited tremendous advantages including their simple construction, and the fact that they are discreet and portable as well as low cost. They have been widely used in cell printing, spray cooling, drug delivery, and other industry fields. First, in this paper, two different concepts of jet and atomization are defined, respectively. Secondly, based on these two concepts, the piezoelectric jet and atomization devices can be divided into two different categories: piezoelectric micro jet device and piezoelectric atomization device. According to the organizational structure, piezoelectric micro jet devices can be classified into four different models: bend mode, push mode, squeeze mode, and shear mode. In addition, their development history and structural characteristics are summarized, respectively. According to the location of applied energy, there are two kinds of piezoelectric atomization devices, i.e., the static mesh atomization device and the vibration mesh atomization device, and both their advantages and drawbacks are discussed. The research achievements are summarized in three aspects of cell printing, spray cooling, and drug delivery. Finally, the future development trends of piezoelectric jet and atomization devices are prospected and forecasted.