CGChengqun Gui

Chengqun Gui

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chengqun Gui has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Phase-coded microlens array for suppressing interference-lattice modulation in highly coherent beam homogenization

    by Yue Zhang, Ruiqi Cheng, Shuhang Qian, Hao Cao, Shuo Chen, Zeyu Yang, Chengqun Gui

    Microlens-array (MLA) homogenizers imprint a periodic interference lattice on the flat-top spot when the illumination is highly coherent, degrading uniformity. We propose a phase-coded microlens array (PC-MLA) that superimposes an optimized deterministic piston step on each lenslet, breaking the constructive-interference condition among the beamlets while leaving the aperture, curvature, and focal length unchanged. The step-height matrix is optimized using simulated annealing to suppress the array-factor lattice. Because the phase coding is decoupled from the geometric mapping, the PC-MLA suppresses the interference lattice while largely preserving the beamlet-overlap condition of a dual-MLA homogenizer. The fabricated device attains a uniformity of 92.24% and a modulation depth of 3.95%, outperforming both a periodic MLA and a random MLA while maintaining a sharp square flat-top boundary in a compact, static configuration.

  • Open Access

    Ultrathin Microlens Arrays for Dynamic Beam Shaping Based on 3D Lithography

    by Ruiqi Cheng, Yue Zhang, Shuo Chen, Yu Shu, Hao Cao, Chengqun Gui

    Conventional microlens arrays (MLAs) are often constrained by their static focal properties, which limit post-fabrication adaptability in dynamic optical systems. To address this, we demonstrate a tunable beam shaper capable of real-time spot-size modulation by introducing an adjustable axial displacement between a primary lens and an MLA. A critical advancement of this work is the fabrication of ultra-thin MLAs featuring an exceptionally low aspect ratio (1:187.5) and continuous surface profiles. Through optimizing 3D lithography and ion beam etching (IBE) workflows, we achieved an optical-grade surface finish with a roughness (Sa) of 3 nm. This high-fidelity, low-profile component enables efficient beam homogenization with reconfigurable working distances and spot dimensions. The proposed architecture provides a versatile and robust solution for advanced laser material processing, bridging the gap between static beam shaping and dynamic laser delivery.


  • 3D OPC method for GLV parallel scanning lithography microstructure topography control based on SinCUT

    by Deming Wang, Hao Cao, Shuo Chen, Yu Shu, Hui Wan, Chengqun Gui, Gui Qun

    A 3D optical proximity correction (OPC) optimization method based on single image contrastive unpaired translation (SinCUT) is proposed for the precise fabrication of 3D microstructures in GLV parallel scanning digital 3D lithography. This method is applied to the optimized fabrication of hyperbolic micro-convex lens arrays. Its fabrication accuracy is demonstrated, showing a significant reduction in the mean square error (MSE) of the morphology. When the lens height is 8.5 µm, the average height error of the lens shape is less than 5%, and the MSE is reduced from 0.727 to 0.0329, resulting in a reduction rate of 92.79%.


  • Open Access

    Micromirror Array with Adjustable Reflection Characteristics Based on Different Microstructures and Its Application

    by Hao Cao, Zhishuang Xue, Hongfeng Deng, Shuo Chen, Deming Wang, Chengqun Gui

    The conventional reflective optical surface with adjustable reflection characteristics requires a complex external power source. The complicated structure and preparation process of the power system leads to the limited modulation of the reflective properties and difficulty of use in large-scale applications. Inspired by the biological compound eye, different microstructures are utilized to modulate the optical performance. Convex aspheric micromirror arrays (MMAs) can increase the luminance gain while expanding the field of view, with a luminance gain wide angle > 90° and a field-of-view wide angle close to 180°, which has the reflective characteristics of a large gain wide angle and a large field-of-view wide angle. Concave aspheric micromirror arrays can increase the luminance gain by a relatively large amount of up to 2.66, which has the reflective characteristics of high gain. Industrial-level production and practical applications in the projection display segment were carried out. The results confirmed that convex MMAs are able to realize luminance gain over a wide spectrum and a wide range of angles, and concave MMAs are able to substantially enhance luminance gain, which may provide new opportunities in developing advanced reflective optical surfaces.


  • Open Access

    An Improved 3D OPC Method for the Fabrication of High-Fidelity Micro Fresnel Lenses

    by Fei Peng, Chao Sun, Hui Wan, Chengqun Gui

    Based on three-dimensional optical proximity correction (3D OPC), recent advancements in 3D lithography have enabled the high-fidelity customization of 3D micro-optical elements. However, the micron-to-millimeter-scale structures represented by the Fresnel lens design bring more stringent requirements for 3D OPC, which poses significant challenges to the accuracy of models and the efficiency of algorithms. Thus, a lithographic model based on optical imaging and photochemical reaction curves is developed in this paper, and a subdomain division method with a statistics principle is proposed to improve the efficiency and accuracy of 3D OPC. Both the simulation and the experimental results show the superiority of the proposed 3D OPC method in the fabrication of Fresnel lenses. The computation memory requirements of the 3D OPC are reduced to below 1%, and the profile error of the fabricated Fresnel lens is reduced 79.98%. Applying the Fresnel lenses to an imaging system, the average peak signal to noise ratio (PSNR) of the image is increased by 18.92%, and the average contrast of the image is enhanced by 36%. We believe that the proposed 3D OPC method can be extended to the fabrication of vision-correcting ophthalmological lenses.


  • Open Access

    Superhydrophobic Multifocal Microlens Array with Depth-of-Field Detection for a Humid Environment

    by Hao Cao, Hongfeng Deng, Hui Wan, Shiyi Luan, Su Shen, Chengqun Gui

    Microlens array (MLA) has been widely applied in augmented reality and optical imaging. When used in a humid environment or medical endoscopy, MLA needs to be both superhydrophobic and multifocal. However, it is not easy to achieve both superhydrophobic and multifocal function by integrating superhydrophobic and multifocal structures on the same surface by means of a simple, efficient, and precise method. In this paper, the superhydrophobic multifocal MLA with superhydrophobic properties and multifocal functions is successfully designed for preparation based on a method of 3D lithography and soft lithography. The 3D lithography can further help the preparation of a multifocal MLA with varying apertures and a multistep superhydrophobic structure with a round dome. The superhydrophobic multifocal MLA with periods 50 and 120 mu m has perfect superhydrophobic property. The water droplet can slide and bounce off the surface at a roll angle of less than 12.9(degrees) with both multifocal and integrated imaging function, as well as up to 397 mu m depth-of-field (DOF) detection range; this greatly exceeds the conventional MLA. The perfect superhydrophobic and optical property can be achieved in an extremely humid environment. The superhydrophobic multifocal MLA proposed in this paper has a promising prospect for actual practices.


  • Open Access

    An Improved 3D OPC Method for the Fabrication of High-Fidelity Micro Fresnel Lenses

    by Fei Peng, Chao Sun, Hui Wan, Chengqun Gui

    Based on three-dimensional optical proximity correction (3D OPC), recent advancements in 3D lithography have enabled the high-fidelity customization of 3D micro-optical elements. However, micron-to-millimeter scale structures represented by Fresnel lens design bring more stringent requirements for 3D OPC, which poses significant challenges to the accuracy of models and the efficiency of algorithms. Thus, a lithographic model based on optical imaging and photo-chemical reaction curve is developed in this paper, and a sub-domain division method with a statistics principle is proposed to improve the efficiency and accuracy of 3D OPC. Both the simulation and the experimental results showed the superiority of the proposed 3D OPC method in the fabrication of the Fresnel lenses. The computation memory requirements of the 3D OPC are reduced to below 1 %, and the profile error of the fabricated Fresnel lens reduced 79.98%. Applying the Fresnel lenses to an imaging system, the average peak signal to noise ratio (PSNR) of the image increased by 18.92 %, and the average contrast of the image enhanced by 36 %. We believe the proposed 3D OPC method can be extended to the fabrication of vision-correcting ophthalmological lenses.


  • 3D trapezoidal edge coupler with high efficiency and tolerance based on Silicon-on-Insulator

    by Xiaoyu Li, Shengtao Yu, Chengqun Gui, Chengliang Sun, Sheng Liu

  • Open Access

    Fiber-to-Chip Three-Dimensional Silicon-on-Insulator Edge Couplers with High Efficiency and Tolerance

    by Xiaoyu Li, Shengtao Yu, Chengqun Gui

    The edge coupler is an indispensable optical device for connecting an external fiber and on-chip waveguide. The coupling efficiency of the edge coupler affects the effective integration of optical circuits. In this study, three-dimensional (3D) edge couplers with high efficiency and tolerance are proposed. The high coupling efficiency of the 3D edge couplers is verified by theoretical calculations. Three couplers are fabricated on a thick-silicon platform via 3D grayscale lithography. At the 1550 nm band, the fiber-to-chip experimental data show that the maximum coupling efficiencies of the three edge couplers are 0.70 dB and 1.34 dB, 0.80 dB and 1.60 dB, and 1.00 dB and 1.14 dB for the TE and TM modes, respectively. At the 1550 nm band, misalignment tolerances measurement data reveal 0.8 dB/0.9 dB tolerance of ±5 μm in the horizontal direction, and 1.7 dB/1.0 dB tolerance of ±2 μm in the vertical direction for TE/TM mode. This study provides a new idea for the design of 3D edge couplers and demonstrates significant superiority in research and industrial applications.