Hao Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hao Liu has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Lei Xu
School of Electrical and Information Engineering, Jiangsu University, Zhenjiang, China
5 shared publications - Xiaoyong Zhu
Jiangsu University
4 shared publications - Wenjie Fan
School of Electrical and Automation Engineering, Nantong University, Nantong, China
3 shared publications - Chao Zhang
School of Electrical and Information Engineering, Jiangsu University, Zhenjiang, China
2 shared publications - Li Quan
School of Electrical and Information Engineering, Jiangsu University, Zhenjiang, China
2 shared publications - Baolong Li
CNOOC Ener Tech-Drilling & Production Co., Tianjin 300452, China
1 shared publication
Latest Publications
- 22 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (11) , 13708-13719
Robust Predictive Current Control of Hybrid-Excited Axial Flux-Switching PM Motor Based on Multiple-Resolution Parameter Identification
Hybrid-excited axial flux-switching permanent magnet (HE-AFSPM) motor drives are nowadays considered for various applications due to numerous advantages when compared with traditional permanent magent (PM) motor counterparts. For the HE-AFSPM motor, to enhance the steady-state performance and reduce the tuning effort and computational time of model predictive current control (MPCC), in this article, a robust predictive current control (RPCC) method with multiple-resolution parameter identification is proposed and investigated. Based on the gradient of current variation, the predictive model of the HE-AFSPM motor is constructed. On this basis, the recursive least squares method is introduced, and identification matrices and multiresolution coefficients are designed for different operating conditions to achieve online optimization of identification target and frequency. The proposed method is compared with the conventional adaptive MPCC, and the effectiveness of the RPCC is confirmed by the experimental results.
- 22 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (11) , 13708-13719
Robust Predictive Current Control of Hybrid-Excited Axial Flux-Switching PM Motor Based on Multiple-Resolution Parameter Identification
Hybrid-excited axial flux-switching permanent magnet (HE-AFSPM) motor drives are nowadays considered for various applications due to numerous advantages when compared with traditional permanent magent (PM) motor counterparts. For the HE-AFSPM motor, to enhance the steady-state performance and reduce the tuning effort and computational time of model predictive current control (MPCC), in this article, a robust predictive current control (RPCC) method with multiple-resolution parameter identification is proposed and investigated. Based on the gradient of current variation, the predictive model of the HE-AFSPM motor is constructed. On this basis, the recursive least squares method is introduced, and identification matrices and multiresolution coefficients are designed for different operating conditions to achieve online optimization of identification target and frequency. The proposed method is compared with the conventional adaptive MPCC, and the effectiveness of the RPCC is confirmed by the experimental results.
- 28 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (9) , 10173-10183
Torque Quality Enhancement of a Multi-Permanent-Magnets Motor Considering Different Role-Plays of Permanent Magnets
In this article, a multi-permanent magnet (multi-PM) motor with a distributed placement of PMs is proposed, considering different role-plays of PMs. The key is to propose a new concept of PM role-play, which can enable different PMs to perform their specific role for torque quality enhancement, i.e., output effective torque improvement and torque ripple suppression. The topology of the multi-PM motor is derived, and the roles of the multiple PMs in air-gap flux density and torque quality are deduced and investigated in detail. Then, the electromagnetic performance of the motor generated by each PM is optimized and evaluated by finite element analysis with the frozen permeability method, including the air-gap flux density, average torque, and torque ripple. Finally, a prototype is manufactured and tested. Experimental results are illustrated to verify the effectiveness of the proposed motor and torque quality enhancement method.
- 28 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (9) , 10173-10183
Torque Quality Enhancement of a Multi-Permanent-Magnets Motor Considering Different Role-Plays of Permanent Magnets
In this article, a multi-permanent magnet (multi-PM) motor with a distributed placement of PMs is proposed, considering different role-plays of PMs. The key is to propose a new concept of PM role-play, which can enable different PMs to perform their specific role for torque quality enhancement, i.e., output effective torque improvement and torque ripple suppression. The topology of the multi-PM motor is derived, and the roles of the multiple PMs in air-gap flux density and torque quality are deduced and investigated in detail. Then, the electromagnetic performance of the motor generated by each PM is optimized and evaluated by finite element analysis with the frozen permeability method, including the air-gap flux density, average torque, and torque ripple. Finally, a prototype is manufactured and tested. Experimental results are illustrated to verify the effectiveness of the proposed motor and torque quality enhancement method.
- 13 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (3) , 6841-6852
Flux-Oriented Design and Analysis of a Hybrid Rotor Pole Interior Permanent Magnet Motor for In-Wheel Direct Drive
By focusing on the dual requirements of high output torque and wide speed range for the in-wheel motors, a new hybrid rotor pole interior permanent magnet motor is proposed in this paper. Different from the conventional PM in-wheel motors, the rotor poles are recombined by two independent asymmetrical units, the variable flux pole (VFP) unit and non-variable flux pole (NVFP) unit. The VFP unit is capable of realizing the flux regulation whereas the NVFP unit produces the basic effective flux, and thus the high output torque and wide speed range requirements can be satisfied simultaneously. Furthermore, a design principle for maximum flux variation characteristics by slot-pole combination and coil pitch selection is presented. On this basis, for the compound units of such motor, a flux-oriented design method considering multiple operating conditions is proposed, where the speed range and output torque requirements of the motor are decomposed into the independent flux design of the two separated pole units, thus providing a rapid motor design method for in-wheel direct drive applications. In addition, the performances of the proposed motor are evaluated, and a prototype motor is manufactured and tested. The results show good agreement with the analysis and the simulated results.
- 13 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (3) , 6841-6852
Flux-Oriented Design and Analysis of a Hybrid Rotor Pole Interior Permanent Magnet Motor for In-Wheel Direct Drive
By focusing on the dual requirements of high output torque and wide speed range for the in-wheel motors, a new hybrid rotor pole interior permanent magnet motor is proposed in this paper. Different from the conventional PM in-wheel motors, the rotor poles are recombined by two independent asymmetrical units, the variable flux pole (VFP) unit and non-variable flux pole (NVFP) unit. The VFP unit is capable of realizing the flux regulation whereas the NVFP unit produces the basic effective flux, and thus the high output torque and wide speed range requirements can be satisfied simultaneously. Furthermore, a design principle for maximum flux variation characteristics by slot-pole combination and coil pitch selection is presented. On this basis, for the compound units of such motor, a flux-oriented design method considering multiple operating conditions is proposed, where the speed range and output torque requirements of the motor are decomposed into the independent flux design of the two separated pole units, thus providing a rapid motor design method for in-wheel direct drive applications. In addition, the performances of the proposed motor are evaluated, and a prototype motor is manufactured and tested. The results show good agreement with the analysis and the simulated results.
- Open Access
Thrust Coordinated Assignment and Ripple Suppression of a Multiple-Modular Permanent Magnet Linear Synchronous Motor Based on Model Predictive Thrust Control
This paper presents a model predictive thrust force control (MPTFC) method for a multiple-modular permanent magnet synchronous linear motor (PMSLM). It focuses on the thrust assignment and thrust ripple of the motor drive system with a multiple-branch inverter. A discrete time model of the PMSLM is established, and the driving system structure and operation principle of the motor are studied. A multi-mode cost function is designed according to the requirements of the different load conditions, and the optimal voltage vector action time is determined. The operation mode is analyzed to determine the distribution factor, so as to reduce the thrust pulsation during operation and improve the performance of the drive system. The results indicate that the proposed MPTFC method is effective in different operating modes, and the drive system has high efficiency and safer performance compared to a conventional drive system.
Open AccessThrust Coordinated Assignment and Ripple Suppression of a Multiple-Modular Permanent Magnet Linear Synchronous Motor Based on Model Predictive Thrust Control
This paper presents a model predictive thrust force control (MPTFC) method for a multiple-modular permanent magnet synchronous linear motor (PMSLM). It focuses on the thrust assignment and thrust ripple of the motor drive system with a multiple-branch inverter. A discrete time model of the PMSLM is established, and the driving system structure and operation principle of the motor are studied. A multi-mode cost function is designed according to the requirements of the different load conditions, and the optimal voltage vector action time is determined. The operation mode is analyzed to determine the distribution factor, so as to reduce the thrust pulsation during operation and improve the performance of the drive system. The results indicate that the proposed MPTFC method is effective in different operating modes, and the drive system has high efficiency and safer performance compared to a conventional drive system.
- 13 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (1) , 204-214
Multiple-Mode Current Control for a Hybrid-Excitation Axial Flux Switching Permanent Magnet Motor Considering Driving Cycles
This article proposes a multiple mode current (MMC) control for hybrid-excitation axial flux switching permanent magnet (HE-AFSPM) motors considering driving cycles. To satisfy the diverse and compound control demands in multiple operating condition of electric vehicles, the model predictive control is adopted, and multiple current vector prediction method including d -axis current, q -axis current, and dc excitation current is proposed to optimize current assignment ratio, enhance the dynamic performance, and improve motor efficiency. An online optimization method considering four operating conditions in two speed domains is demonstrated, where the different current assignment function and constraint is applied in each operating condition, and the optimal assignment currents are obtained effectively by the Lagrange multiplier method online in real time. Finally, to verify the feasibility of the multiple-mode control method, a prototype motor is built and tested. And, the motor performances in the different driving modes are investigated in detail. The experimental results reveal that the proposed control method can offer an effective control for the HE-AFSPM motor, where multimode operations are indispensable.
- 13 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (1) , 204-214
Multiple-Mode Current Control for a Hybrid-Excitation Axial Flux Switching Permanent Magnet Motor Considering Driving Cycles
This article proposes a multiple mode current (MMC) control for hybrid-excitation axial flux switching permanent magnet (HE-AFSPM) motors considering driving cycles. To satisfy the diverse and compound control demands in multiple operating condition of electric vehicles, the model predictive control is adopted, and multiple current vector prediction method including d -axis current, q -axis current, and dc excitation current is proposed to optimize current assignment ratio, enhance the dynamic performance, and improve motor efficiency. An online optimization method considering four operating conditions in two speed domains is demonstrated, where the different current assignment function and constraint is applied in each operating condition, and the optimal assignment currents are obtained effectively by the Lagrange multiplier method online in real time. Finally, to verify the feasibility of the multiple-mode control method, a prototype motor is built and tested. And, the motor performances in the different driving modes are investigated in detail. The experimental results reveal that the proposed control method can offer an effective control for the HE-AFSPM motor, where multimode operations are indispensable.