Jianxiong Wei
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jianxiong Wei has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Shiwei Fan
College of Computer and Control Engineering, Northeast Forestry University, Harbin 150040, China
4 shared publications - Ya Zhang
School of Instrument Science and Engineering, Harbin Institute of Technology, Harbin 150001, China
4 shared publications - Fei Yu
School of Instrumentation Science and Engineering, Harbin Institute of Technology, Harbin 150001, China
2 shared publications - Qingxin Wang
School of Instrumentation Science and Engineering, Harbin Institute of Technology, Harbin, China
2 shared publications - Wei Gao
School of Instrumentation Science and Engineering, Harbin Institute of Technology, Harbin 150001, China
2 shared publications - Yanyan Wang
College of Shipbuilding Engineering, Harbin Engineering University, Harbin, China
2 shared publications
Latest Publications
- 8 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 9525312
A Novel Cooperative Positioning Algorithm Based on High-Precision IMU Preintegration and Adaptive Sliding Observation Optimization
Environments with dense obstacles that cause multipath propagation of ranging signals present a critical challenge that need be urgently addressed for multiple agents cooperative system to achieve high-precision positioning. Aiming to address the problems of imprecise models in typical inertial measurement unit (IMU) preintegration-based graph optimization algorithms and the non-Gaussian distribution of ranging sensor noise in multiple agents cooperative system, this article proposes a novel cooperative positioning algorithm based on high-precision IMU preintegration and adaptive sliding observation optimization. First, a leader-follower cooperative positioning model is constructed, accounting for the spatial offset between micro-electro-mechanical system (MEMS) and ultra wide band (UWB). Then, a high-precision IMU preintegration model incorporating Coriolis force and centripetal force is derived. Finally, an adaptive sliding observation optimization model is designed to enhance robustness against ranging outliers. Multiple sets of simulations and multiple unmanned ground vehicles (UGVs) cooperative experiments have been conducted, validating the exceptional performance of the proposed algorithm. In multiple UGVs experiments conducted in obstacle-dense environments, the proposed algorithm achieved reductions in positioning error of 16.2% and 7.8% compared to algorithms based on rough IMU preintegration model and improved Earth-rotation-aware IMU preintegration model, respectively.
- 8 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 9525312
A Novel Cooperative Positioning Algorithm Based on High-Precision IMU Preintegration and Adaptive Sliding Observation Optimization
Environments with dense obstacles that cause multipath propagation of ranging signals present a critical challenge that need be urgently addressed for multiple agents cooperative system to achieve high-precision positioning. Aiming to address the problems of imprecise models in typical inertial measurement unit (IMU) preintegration-based graph optimization algorithms and the non-Gaussian distribution of ranging sensor noise in multiple agents cooperative system, this article proposes a novel cooperative positioning algorithm based on high-precision IMU preintegration and adaptive sliding observation optimization. First, a leader-follower cooperative positioning model is constructed, accounting for the spatial offset between micro-electro-mechanical system (MEMS) and ultra wide band (UWB). Then, a high-precision IMU preintegration model incorporating Coriolis force and centripetal force is derived. Finally, an adaptive sliding observation optimization model is designed to enhance robustness against ranging outliers. Multiple sets of simulations and multiple unmanned ground vehicles (UGVs) cooperative experiments have been conducted, validating the exceptional performance of the proposed algorithm. In multiple UGVs experiments conducted in obstacle-dense environments, the proposed algorithm achieved reductions in positioning error of 16.2% and 7.8% compared to algorithms based on rough IMU preintegration model and improved Earth-rotation-aware IMU preintegration model, respectively.
- 26 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (22) , 41919-41932
A Self-Alignment Method for HRG-SINS Based on Novel Self-Calibration Method and Error Model for Underwater Vehicle
Strapdown Inertial Navigation Systems (SINS) provide autonomous navigation for underwater vehicles using Inertial Measurement Unit (IMU) data. SINS can achieve initial alignment through self-calibration technology before entering the navigation stage. However, gyroscope biases and scale factor errors degrade alignment accuracy. Hemispherical Resonator Gyroscope (HRG) is a new type of high-precision gyroscope. When operated in Force-to-Rebalance (FTR) mode, it exhibits low-noise characteristics and supports mode reversal for self-calibration of bias and scale factor, thus enhancing SINS alignment precision. When a certain HRG performs self-calibration, it causes output interruption angular velocity. At this time, other HRGs need to provide angular velocity as the reference and maintain the regular operation of SINS. Therefore, a mode reversal sequence is designed based on the FTR-mode HRG and the 4-HRG-SINS structure. The error equations for bias and scale factor of 4-HRG-SINS were established, and the optimal estimation of bias and scale factor errors was achieved through the Kalman filter (KF). Then, coarse alignment is performed to obtain rough attitude and latitude. Finally, integrating the results of self-calibration and coarse alignment with the novel HRG-SINS error models, the fine alignment scheme is developed using a backtracking framework. Finally, both simulations and semi-physical simulations validate the algorithm’s effectiveness.
- 26 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (22) , 41919-41932
A Self-Alignment Method for HRG-SINS Based on Novel Self-Calibration Method and Error Model for Underwater Vehicle
Strapdown Inertial Navigation Systems (SINS) provide autonomous navigation for underwater vehicles using Inertial Measurement Unit (IMU) data. SINS can achieve initial alignment through self-calibration technology before entering the navigation stage. However, gyroscope biases and scale factor errors degrade alignment accuracy. Hemispherical Resonator Gyroscope (HRG) is a new type of high-precision gyroscope. When operated in Force-to-Rebalance (FTR) mode, it exhibits low-noise characteristics and supports mode reversal for self-calibration of bias and scale factor, thus enhancing SINS alignment precision. When a certain HRG performs self-calibration, it causes output interruption angular velocity. At this time, other HRGs need to provide angular velocity as the reference and maintain the regular operation of SINS. Therefore, a mode reversal sequence is designed based on the FTR-mode HRG and the 4-HRG-SINS structure. The error equations for bias and scale factor of 4-HRG-SINS were established, and the optimal estimation of bias and scale factor errors was achieved through the Kalman filter (KF). Then, coarse alignment is performed to obtain rough attitude and latitude. Finally, integrating the results of self-calibration and coarse alignment with the novel HRG-SINS error models, the fine alignment scheme is developed using a backtracking framework. Finally, both simulations and semi-physical simulations validate the algorithm’s effectiveness.
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-16
A Robust In-Motion Alignment Method for a DVL-Aided SINS With Latitude Uncertainty
Strapdown inertial navigation system (SINS) is a vital navigation equipment for underwater vehicles. Achieving accurate in-motion alignment of SINS requires the aid of a Doppler velocity log (DVL). Affected by the underwater working environment, the velocity provided by the DVL often contains outliers, which can negatively impact the alignment results of the SINS. In addition, obtaining latitude in the underwater environment from the outside is difficult, further complicating the SINS alignment process. This article proposes a robust in-motion alignment method for the DVL-aided SINS with latitude uncertainty to address these challenges. The alignment process consists of two stages: coarse alignment and fine alignment. In the coarse alignment stage, a DVL-aided in-motion latitude estimation method that incorporates noise suppression capabilities for the inertial measurement unit (IMU) of the SINS is developed. To mitigate the impact of outliers provided by the DVL on latitude estimation, a robust filtering model based on constructing gravity vectors (CGV) is proposed for outlier detection. The coarse attitude and latitude are then obtained using the multivector attitude determination method. In the fine alignment stage, the stored navigation data and Kalman filter (KF) are used to complete the fine alignment through the designed backtracking navigation framework. This not only reduces the alignment time but also directly transfers to the integrated navigation stage with latitude uncertainty, continuing to prevent the influence of outliers. Simulation and field tests verify the effectiveness and advantages of the proposed algorithm.
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-16
A Robust In-Motion Alignment Method for a DVL-Aided SINS With Latitude Uncertainty
Strapdown inertial navigation system (SINS) is a vital navigation equipment for underwater vehicles. Achieving accurate in-motion alignment of SINS requires the aid of a Doppler velocity log (DVL). Affected by the underwater working environment, the velocity provided by the DVL often contains outliers, which can negatively impact the alignment results of the SINS. In addition, obtaining latitude in the underwater environment from the outside is difficult, further complicating the SINS alignment process. This article proposes a robust in-motion alignment method for the DVL-aided SINS with latitude uncertainty to address these challenges. The alignment process consists of two stages: coarse alignment and fine alignment. In the coarse alignment stage, a DVL-aided in-motion latitude estimation method that incorporates noise suppression capabilities for the inertial measurement unit (IMU) of the SINS is developed. To mitigate the impact of outliers provided by the DVL on latitude estimation, a robust filtering model based on constructing gravity vectors (CGV) is proposed for outlier detection. The coarse attitude and latitude are then obtained using the multivector attitude determination method. In the fine alignment stage, the stored navigation data and Kalman filter (KF) are used to complete the fine alignment through the designed backtracking navigation framework. This not only reduces the alignment time but also directly transfers to the integrated navigation stage with latitude uncertainty, continuing to prevent the influence of outliers. Simulation and field tests verify the effectiveness and advantages of the proposed algorithm.
- Open Access
- 14 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 19 (8) , 8743-8753
A Novel Adaptive Sliding Observation-Based Cooperative Positioning Algorithm Under Factor Graph Framework for Multiple UUVs
In the leader–follower-based multiple underwater unmanned vehicles (UUVs) cooperative positioning system, the precision of the compass and Doppler velocity log equipped with the follower UUV is low, which will inevitably lead to yaw error and velocity error (YEaVE) in the output data. These errors will seriously affect the positioning accuracy of follower UUV. In addition, the observation information often has many outliers due to the influence of underwater multipath, which will cause the increase of the positioning error. Herein, we propose a novel adaptive sliding observation-based cooperative positioning algorithm under the factor graph framework. First, the influence mechanism of YEaVE on positioning accuracy of the follower UUV is analyzed. Thereafter, under the factor graph framework, a cooperative positioning algorithm based on maximum correntropy criterion is designed in which the estimation and compensation of YEaVE are innovatively added. At last, an adaptive sliding observation method is designed to deal with outliers in observation information. The proposed algorithm is verified by simulations and shipboard experiment, and the results show that it can accurately estimate the YEaVE. At the same time, compared with the ordinary factor graph algorithm, the positioning accuracy of the proposed algorithm has been improved by 88.31% and 81.63% in simulation and shipboard experiment.
- 14 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 19 (8) , 8743-8753
Open AccessA Novel Adaptive Sliding Observation-Based Cooperative Positioning Algorithm Under Factor Graph Framework for Multiple UUVs
In the leader–follower-based multiple underwater unmanned vehicles (UUVs) cooperative positioning system, the precision of the compass and Doppler velocity log equipped with the follower UUV is low, which will inevitably lead to yaw error and velocity error (YEaVE) in the output data. These errors will seriously affect the positioning accuracy of follower UUV. In addition, the observation information often has many outliers due to the influence of underwater multipath, which will cause the increase of the positioning error. Herein, we propose a novel adaptive sliding observation-based cooperative positioning algorithm under the factor graph framework. First, the influence mechanism of YEaVE on positioning accuracy of the follower UUV is analyzed. Thereafter, under the factor graph framework, a cooperative positioning algorithm based on maximum correntropy criterion is designed in which the estimation and compensation of YEaVE are innovatively added. At last, an adaptive sliding observation method is designed to deal with outliers in observation information. The proposed algorithm is verified by simulations and shipboard experiment, and the results show that it can accurately estimate the YEaVE. At the same time, compared with the ordinary factor graph algorithm, the positioning accuracy of the proposed algorithm has been improved by 88.31% and 81.63% in simulation and shipboard experiment.